Cabot Australian Timber Oil, Mahogany Flame, Quart
Cabot Australian Timber Oil, Mahogany Flame, Quart is intended for exterior use.
Features
- Translucent oil finish
- Water repellent
- Mildew-resistant coating film
- UV-absorbing iron oxide pigments
Best for
Exterior wood decks; Siding; Railings; Fences; Outdoor furniture
Specs
| Color or finish | Mahogany Flame |
|---|---|
| Selected size | Quart |
| Base | linseed oil, tung oil and long-oil alkyds in petroleum distillates |
| Use | exterior |
| Coverage | Smooth wood 400-600 sq ft/gallon; rough wood 250-350 sq ft/gallon |
| Touch dry | 24-48 hours drying time |
| Application conditions | 50-90°F |
| Coats | 1 |
| Apply with | Natural bristle brush; Stain pad; Professional spray with immediate back brushing |
| Thinning | Do not thin |
| Cleanup | Mineral spirits or regionally compliant cleaner |
| VOC | <550 |
| Manufacturer part # | 080351434594 |
How to apply
Start with the manufacturer's preparation steps: Clean sound dry wood; remove dirt, mildew stains and loose fibers; Scrape loose old stain and sand edges smooth; Test treated wood for porosity; Clean weathered wood and dry 24-48 hours.
- Shake and stir; combine containers for color uniformity.
- Apply one coat in small sections, brushing back after spray.
Good to know
Use limits: Painted or sealed surfaces; Wet or damp surfaces.
Danger: Flammable liquid and vapor; aspiration hazard; may cause skin allergy, genetic defects, reproductive harm and cancer. Oil-soaked rags may spontaneously ignite.
Questions
How much will I need?
Use these manufacturer coverage figures: Smooth wood 400-600 sq ft/gallon; rough wood 250-350 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
How should I clean up?
The manufacturer specifies Mineral spirits or regionally compliant cleaner. Follow the product label for cleanup and disposal.