ZAR Interior Oil Base Stain, Champagne, Half Pint
ZAR Interior Oil Base Stain in Champagne, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.
Features
- Controlled penetration helps produce even color.
- One stain coat can color a prepared surface.
- A second dry-stage coat can deepen the tone.
- Manufacturer directions include decorative glazing and nonwood applications.
Best for
Interior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.
Specs
| Color / size | Champagne / Half Pint |
|---|---|
| Base / use | Oil-based wiping stain / interior; conditional exterior vertical use |
| Coverage | About 200 sq ft per can at 1 mil; actual yield varies |
| Drying / recoat | General wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry |
| Touch dry / full cure | Separate times not published; follow the protective topcoat’s cure instructions |
| Coats / tools | One stain coat; optional second / lint-free cloth, foam or natural-bristle brush |
| Thinning / cleanup | No can-dilution recipe published / mineral spirits |
| VOC | No numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification |
| Manufacturer part # | 50806 |
How to apply
- Remove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.
- Stir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.
- For embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.
- Apply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.
Good to know
DANGER: Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the matching-color SDS dated 2020-12-08 and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.
Questions
Can I lighten the result? Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.
Can I blend colors? Two colors in this ZAR line can be mixed 50:50; test first.
Will the photo match my project? Wood, preparation and application affect color; test a sample on your surface.