Skip to content
FREE SHIPPING ON ORDERS $35+ | Premium Paint & Supplies
Free Shipping $35+

Watco Danish Oil, Cherry, Pint

by Watco
Original price $17.72 - Original price $17.72
Original price
$17.72
$17.72 - $17.72
Current price $17.72

Watco Danish Oil, Cherry, Pint is intended for Interior only use.

Features

  • Penetrating oil and varnish blend
  • Stains, seals and protects
  • Will not crack, chip or peel

Best for

Bare interior wood

Specs

Color or finish Cherry
Selected size Pint
Base Oil and varnish blend; mineral spirits solvent
Use Interior only
Coverage Varies with wood type and porosity
Touch dry 6-8 hours at 70-80°F and 50% RH
Recoat 72 hours at 70-80°F and 50% RH
Application conditions 60-90°F; below 85% relative humidity
Coats One coat; additional coats if needed
Apply with Brush; Lint-free rag
Cleanup Mineral spirits or paint thinner
VOC 441-492 g/L
Topcoat compatibility Rust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer
Manufacturer part # 65251

How to apply

Start with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.

  1. Test color on inconspicuous area
  2. Mix or shake thoroughly and stir occasionally
  3. Apply one liberal coat by brush or lint-free rag
  4. Allow 15 minutes penetration, then wipe excess with grain
  5. If needed, apply another coat and wipe excess after 15 minutes
  6. Allow at least 72 hours before a polyurethane topcoat

Good to know

Use limits: Floors; Exterior use.

Danger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.

Questions

How much will I need?

Use these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.

When can I apply another coat?

The listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.

Manufacturer directions and product information