Varathane Outdoor Water-Based Spar Urethane Spray, Clear Satin, 1 oz
Varathane Outdoor Water-Based Spar Urethane Spray, Clear Satin, 1 oz is intended for exterior use.
Features
- UV and weather protection
- Clear finish
Best for
Outdoor furniture; Doors; Windows; Fences; Railings; House trim; Boats above waterline
Specs
| Color or finish | Clear Satin |
|---|---|
| Sheen | Satin |
| Selected size | 1 oz |
| Base | water, urethane modified acrylic aerosol |
| Use | exterior |
| Coverage | 10-12 sq ft per aerosol can |
| Touch dry | 30 minutes |
| Recoat | 1 hour |
| Full cure | Normal use after 3 days |
| Application conditions | 55-90°F; relative humidity below 85% |
| Coats | At least 4 |
| Apply with | Aerosol spray |
| Cleanup | Mineral spirits or paint thinner for wet aerosol stain per TDS |
| Topcoat compatibility | Over thoroughly dry stain or paint; test inconspicuous area |
| Manufacturer part # | 250281 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry surface; Remove wax, grease, oil, shellac, lacquer, mildew and polishes; Sand poor old finish with 120-150 grit; Remove sanding dust.
Good to know
Use limits: Decks; High traffic areas; Siding; Rough-sawn surfaces.
Danger: Extremely flammable aerosol; may cause an allergic skin reaction; gas under pressure may explode if heated.
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: 10-12 sq ft per aerosol can. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 1 hour. Follow the application conditions and instructions for this product.