Penofin Architectural Grade Hardwood TSF, Natural, Satin, Gallon
Penofin Architectural Grade Hardwood TSF, Natural, Satin, Gallon is intended for exterior use.
Features
- Transparent satin finish
- Waterborne alkyd-urethane hybrid
- Modified natural oils
- Water repellent and breathable
- <100 g/L VOC
- Two-coat application
Best for
Exterior hardwood decking; Siding; Fencing; Steps; Railings; Furniture
Specs
| Color or finish | Natural |
|---|---|
| Sheen | Satin |
| Selected size | Gallon |
| Base | waterborne alkyd-urethane hybrid with emulsified linseed oil |
| Use | exterior |
| Coverage | Smooth surface first coat 300-400 sq ft/gallon; second coat 400-600 sq ft/gallon |
| Touch dry | First coat 4-6 hours |
| Recoat | 4-6 hours |
| Full cure | 72 hours |
| Application conditions | 40-90°F |
| Coats | Two thin coats |
| Apply with | Pad applicator; High-quality pump sprayer with back-brushing or pad; Roller with 3/8-inch nap or longer on rough surfaces only |
| Thinning | Do not thin |
| Cleanup | Soap and water |
| VOC | <100 g/L |
| Manufacturer part # | FAHNSGA |
How to apply
Start with the manufacturer's preparation steps: New surfaces: First Step Prep; Old surfaces: Pro-Tech products; Previously treated with non-Penofin product: strip, clean, brighten; Ensure surface is sound, clean and completely dry.
- Clean and dry wood; strip older non-Penofin coatings
- Test penetration in an inconspicuous area
- Stir during application
- Apply first thin coat in small sections, distributing puddles
- Wait 4-6 hours
- Apply second thin coat
- Allow 72 hours to cure
Good to know
Use limits: Wet or unsound wood; Direct sunlight; Rain expected within 24 hours; Overapplication.
WARNING: May cause an allergic skin reaction; toxic to aquatic life
Keep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.
Questions
How much will I need?
Use these manufacturer coverage figures: Smooth surface first coat 300-400 sq ft/gallon; second coat 400-600 sq ft/gallon. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is 4-6 hours. Follow the application conditions and instructions for this product.