Old Masters Wiping Stain, Cherry, Half Pint
Old Masters Wiping Stain in Cherry, Half Pint, adds oil-based color to prepared interior wood and compatible surfaces. Plan about 31 sq ft from this half-pint can, with yield affected by wood texture, porosity and application. Its rich formula can also update an existing finish after preparation; test your complete stain-and-clear-finish process first.
Features
- A rich formula supports controlled color application.
- Suitable for difficult-to-stain woods such as pine and maple.
- Works over properly prepared existing finishes.
- Wiping colors can be intermixed for a tested custom shade.
Best for
Interior furniture, cabinetry, trim and compatible fiberglass, coated metal or composition surfaces. Use as a glaze only over thoroughly dry paint. Manufacturer maple and oak samples are approximate color references; species and preparation affect the result.
Specs
| Color / size | Cherry / Half Pint |
|---|---|
| Base / use | Oil-based wiping stain / interior only |
| Coverage | About 31 sq ft per can, scaled from 500 sq ft/gallon |
| Dry time / touch dry | Approximately 10 hours general drying; touch dry not separately specified |
| Recoat / full cure | Usually 12 hours or longer, when thoroughly dry / no full-cure duration stated |
| Coats | Usually 1 stain coat; optional second; compatible protective clear finish |
| Apply with | Brush, lint-free cloth or spray on bare wood; method varies for other surfaces |
| Thinning / cleanup | Do not thin / mineral spirits or paint thinner where permitted |
| VOC | Actual VOC 218 g/L; EPA VOC 219 g/L; matching SDS revised 18-May-2026 |
| Manufacturer part # | 11316 |
How to apply
- Clean a dry surface of wax, grease, glue and dirt. Sand bare wood smooth with 120- or 180-grit paper, repair defects and remove dust with a tack rag or mineral-spirits-dampened lint-free cloth. Follow lead-dust precautions before disturbing old paint.
- Stir before and during use. On bare wood, apply liberally with a brush, lint-free cloth or spray. Let penetrate 5–15 minutes, then wipe across the grain and finally with it. On fiberglass/composition, work one panel at a time and feather streaks while wet.
- For an existing finish, scuff with very fine sandpaper, remove dust, apply a thin uniform coat with foam or bristle brush and dry-brush along the grain. For painted glaze, use fully dry paint, let stain set 5–10 minutes, then dry-brush.
- Allow thorough drying, usually 12 hours or longer before recoating or topcoating; hardwood floors need 24 hours or longer. Ideal conditions are 70–75°F and 35–50% humidity. The February 2025 TDS directs complete drying plus an additional 24 hours before water-based finish. Test lacquer compatibility for stain; do not use lacquer over a glaze.
Good to know
DANGER: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the exact manufacturer-code safety sheet, wear its specified protection, provide adequate ventilation, avoid breathing vapors and keep ignition sources away. Contaminated rags, steel wool and sanding waste can ignite spontaneously: immediately seal in a water-filled metal container and dispose under local fire rules. Use as packaged; do not thin.
Questions
Can I use it outdoors? No. This Wiping Stain is intended for interior use only.
How do I get a darker shade? Apply an optional second coat after the first is thoroughly dry; test first.
Can Natural lighten another Wiping color? Yes. Natural Tint Base can be mixed in any tested proportion with another Wiping Stain color.