Old Masters Tung Oil Varnish, Quart
Old Masters Tung Oil Varnish, Quart is intended for interior use.
Features
- Blend of tung oil and varnish
- Water and alcohol resistant finish
Best for
Interior bare wood; Antiques; Fine furniture; Cabinets; Tables; Bar tops
Specs
| Selected size | Quart |
|---|---|
| Base | tung oil and varnish blend |
| Use | interior |
| Coverage | Approximately 678 sq ft/gal |
| Touch dry | Approximately 4 to 6 hours at 70°F and 50% RH |
| Recoat | After 4 to 6 hours and light buffing |
| Application conditions | Air and surface 60°F to 90°F; humidity 30% to 70% |
| Apply with | Lint-free cloth; Brush |
| Thinning | Do not thin |
| Cleanup | Paint thinner or mineral spirits |
| VOC | Maximum 450 |
| Manufacturer part # | 50504 |
How to apply
Start with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, glue and contaminants.
- Prepare bare wood
- Apply with cloth or brush along grain
- Wipe excess with clean cloth
- Wait 4 to 6 hours, buff lightly with fine steel wool and remove dust
- Reapply if desired
Good to know
Danger: Flammable liquid and vapor; skin sensitization, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration hazards.
Danger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.
Questions
How much will I need?
Use these manufacturer coverage figures: Approximately 678 sq ft/gal. Match the figure to the container size, and account for the stated number of coats.
When can I apply another coat?
The listed manufacturer recoat guidance is After 4 to 6 hours and light buffing. Follow the application conditions and instructions for this product.