{"product_id":"old-masters-wiping-stain-red-mahogany-half-pint","title":"Old Masters Wiping Stain, Red Mahogany, Half Pint","description":"\u003cp\u003eOld Masters Wiping Stain in Red Mahogany, Half Pint, adds oil-based color to prepared interior wood and compatible surfaces. Plan about 31 sq ft from this half-pint can, with yield affected by wood texture, porosity and application. Its rich formula can also update an existing finish after preparation; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA rich formula supports controlled color application.\u003c\/li\u003e\n\u003cli\u003eSuitable for difficult-to-stain woods such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eWorks over properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eWiping colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior furniture, cabinetry, trim and compatible fiberglass, coated metal or composition surfaces. Use as a glaze only over thoroughly dry paint. Manufacturer maple and oak samples are approximate color references; species and preparation affect the result.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eRed Mahogany \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 31 sq ft per can, scaled from 500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 10 hours general drying; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eUsually 12 hours or longer, when thoroughly dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush, lint-free cloth or spray on bare wood; method varies for other surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits or paint thinner where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eActual VOC 222 g\/L; EPA VOC 224 g\/L; matching SDS revised 03-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eClean a dry surface of wax, grease, glue and dirt. Sand bare wood smooth with 120- or 180-grit paper, repair defects and remove dust with a tack rag or mineral-spirits-dampened lint-free cloth. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply liberally with a brush, lint-free cloth or spray. Let penetrate 5–15 minutes, then wipe across the grain and finally with it. On fiberglass\/composition, work one panel at a time and feather streaks while wet.\u003c\/li\u003e\n\u003cli\u003eFor an existing finish, scuff with very fine sandpaper, remove dust, apply a thin uniform coat with foam or bristle brush and dry-brush along the grain. For painted glaze, use fully dry paint, let stain set 5–10 minutes, then dry-brush.\u003c\/li\u003e\n\u003cli\u003eAllow thorough drying, usually 12 hours or longer before recoating or topcoating; hardwood floors need 24 hours or longer. Ideal conditions are 70–75°F and 35–50% humidity. The February 2025 TDS directs complete drying plus an additional 24 hours before water-based finish. Test lacquer compatibility for stain; do not use lacquer over a glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/11416_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection, provide adequate ventilation, avoid breathing vapors and keep ignition sources away. Contaminated rags, steel wool and sanding waste can ignite spontaneously: immediately seal in a water-filled metal container and dispose under local fire rules. Use as packaged; do not thin.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e No. This Wiping Stain is intended for interior use only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get a darker shade?\u003c\/strong\u003e Apply an optional second coat after the first is thoroughly dry; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Wiping color?\u003c\/strong\u003e Yes. Natural Tint Base can be mixed in any tested proportion with another Wiping Stain color.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673297223990,"sku":"11416","price":13.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348114166.jpg?v=1791582883","url":"https:\/\/projectweekenddiy.com\/products\/old-masters-wiping-stain-red-mahogany-half-pint","provider":"Project Weekend DIY","version":"1.0","type":"link"}