{"product_id":"general-finishes-water-based-stain-antique-brown-quart","title":"General Finishes Water-Based Stain, Antique Brown, Quart","description":"\u003cp\u003eGeneral Finishes Water-Based Wood Stain in Antique Brown, Quart, adds pigmented color to interior wood furniture and cabinetry. This quart can covers about 100–150 sq ft, depending on the wood and application. Test the complete stain-and-topcoat process first: species, preparation and the old finish affect the result.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePigmented color highlights interior wood projects.\u003c\/li\u003e\n\u003cli\u003eA workable formula supports controlled application on woods such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update a prepared existing finish with thin dry-brushed coats.\u003c\/li\u003e\n\u003cli\u003eAn optional second raw-wood coat deepens color after drying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eIndoor wood cabinets, furniture, trim and doors. Use on raw wood or a cleaned, sanded existing finish after an adhesion test. Compare the Antique Brown maple and oak swatches, then test your own wood and topcoat.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAntique Brown \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based pigmented stain \/ interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 100–150 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eRaw wood: 30 minutes or longer; existing finish: 1 hour or longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003e2 hours or longer, when dry \/ no cure duration specified; TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eRaw wood: 1–2; existing finish: up to 3 thin dry-brushed coats; finish with 3 compatible GF topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic-bristle or foam brush, pad, microfiber roller or spray; HVLP 1.1–1.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water: start at 5%, up to 10% by volume if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water or GF Brush \u0026amp; Gun Cleaner, immediately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 125 g\/L, Antique Brown SDS revised February 2, 2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eWAQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eFor raw wood, sand with 120 grit, followed by 150 or 220 grit, and remove dust. For a sealed finish, scuff-clean with a non-woven pad and a 50:50 denatured alcohol\/water mix, dry 1–2 hours, then lightly sand with 220–320 grit. Remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir before and throughout use. On raw wood, flood one manageable section with a brush or pad, then wipe excess with the grain using an absorbent towel. Pull pools from details; correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eOn an existing finish, use thin dry-brushed coats with a foam brush or staining pad and feather uneven spots. Avoid thick build. Allow at least two hours between coats and until dry.\u003c\/li\u003e\n\u003cli\u003eApply three compatible topcoat coats after full drying. Wait at least 24 hours before an oil-based topcoat. Times assume about 70°F and 50% humidity; cool, humid or thick applications take longer.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse cloths for wiping, not applying; cotton T-shirts do not absorb excess well. Optional Pre-Stain Conditioner Natural can improve uniformity but limits color absorption. Oil-based topcoats can amber; test your choice. Follow current Extender and spray instructions, including the specified respirator and ventilation. \u003cstrong\u003eDANGER:\u003c\/strong\u003e May cause cancer. Follow the sheet’s protection and handling instructions. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2024-02\/SDS-English-Water-Based-Wood-Stain-ANTIQUE-BROWN-Water-Base-General-Finishes-US-HCS-2012-v1-2024-02-02.PDF\"\u003eAntique Brown safety sheet\u003c\/a\u003e and can label. Dispose under local rules; do not pour leftovers down drains.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it over a finished cabinet?\u003c\/strong\u003e Yes, after preparation and a successful adhesion test, using thin coats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the swatch match my wood exactly?\u003c\/strong\u003e No. Species, preparation and topcoat affect color; test first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes. The stain supplies color; a compatible topcoat protects it.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673250136374,"sku":"WAQT","price":39.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016103300.jpg?v=1791581975","url":"https:\/\/projectweekenddiy.com\/products\/general-finishes-water-based-stain-antique-brown-quart","provider":"Project Weekend DIY","version":"1.0","type":"link"}