{"product_id":"general-finishes-oil-based-gel-stain-java-quart","title":"General Finishes Gel Stain, Java, Quart","description":"\u003cp\u003eGeneral Finishes Gel Stain in Java, Quart, gives interior wood projects a heavy-bodied, wipe-on color finish. This quart can covers about 150-200 sq ft per can, depending on the wood and application. Test the complete stain-and-topcoat combination on your project first: wood species and existing finishes affect the final color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood or an existing finish:\u003c\/strong\u003e Use it on raw wood (sand no finer than 150 grit on hardwoods such as oak and maple, 180 grit on softwoods such as pine) or over an existing finish after cleaning with a 50:50 mix of denatured alcohol and water and a light scuff sand with a 220-320 grit foam pad. Always test adhesion first (General Finishes Gel Stain TDS, March 2020).\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThick consistency helps even out color on blotchy woods such as pine.\u003c\/li\u003e\n\u003cli\u003eWipe-on application works with a brush, pad or absorbent cloth.\u003c\/li\u003e\n\u003cli\u003eCan refresh an existing finish after cleaning, sanding and an adhesion test.\u003c\/li\u003e\n\u003cli\u003eA second thin coat can deepen the color when the first coat is fully dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cp\u003eInterior wood furniture, cabinets, doors and trim. Use the color swatches as a starting point, then test on the actual wood. This stain is for indoor projects; it is not an exterior coating.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eJava \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented gel stain \/ interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 150-200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry, raw wood\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAllow 24 hours or longer on raw wood; 72 hours or longer over existing finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e30 days under recommended conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1-2 stain coats, then 3 coats of a compatible General Finishes topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural-bristle or foam brush, pad or absorbent cloth; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits; if thinning is needed, start at 5% and do not exceed 15% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 450 g\/L (Java, per General Finishes color SDS and product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e195-937\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt about 150-200 sq ft per quart per coat, one quart covers a typical kitchen of cabinet frames or several pieces of furniture in one coat; plan a second coat if you want a deeper color. For a single small project, the \u003ca href=\"\/products\/general-finishes-oil-based-gel-stain-java-pint\"\u003eJava pint\u003c\/a\u003e or \u003ca href=\"\/products\/general-finishes-oil-based-gel-stain-java-half-pint\"\u003eJava half pint\u003c\/a\u003e may be enough.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrepare raw wood with 120 then 150 grit. For existing finishes, clean with a 50:50 denatured alcohol\/water mix, dry, then scuff with 220-320 grit. Remove dust, let dry and test adhesion.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly. Work one manageable section at a time. Apply enough stain to keep the surface wet, then wipe excess evenly with the grain. Pull puddles from corners and details.\u003c\/li\u003e\n\u003cli\u003eLet dry fully before recoating. The times above assume about 70 F and 50% humidity; cool, humid conditions or an existing finish can take longer. Wait if the surface is tacky.\u003c\/li\u003e\n\u003cli\u003eSeal the dry stain with three coats of a compatible topcoat, following that product's instructions. Allow at least 72 hours, and complete drying, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eDo not leave a thick, paint-like coat. Immediately place soaked applicators in a sealed, water-filled metal container and dispose of them under local fire rules. Keep away from heat and flame. Use adequate ventilation. This product carries a California Proposition 65 warning; see the SDS.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill this color look the same on every wood?\u003c\/strong\u003e No. Species, preparation and the old finish affect color; topcoat deepens it. Test the entire finish first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on an already finished cabinet?\u003c\/strong\u003e Yes, after cleaning, scuff sanding and a successful adhesion test. Allow longer drying than on raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes. Seal it with three coats of a compatible General Finishes topcoat after the stain is fully dry.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSee every color in \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e, compare lines in \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003eWood Stains and Gel Stains\u003c\/a\u003e, pick a clear coat from \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e, or plan the job with the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e or the \u003ca href=\"\/pages\/paint-cabinets-project-cart\"\u003ecabinet project cart\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eStep-by-step: \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003eHow to Use Gel Stain on Cabinets and Furniture Without Stripping\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67791791554870,"sku":"195-937","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/general-finishes-java-gel-stain-quart.jpg?v=1792629905","url":"https:\/\/projectweekenddiy.com\/products\/general-finishes-oil-based-gel-stain-java-quart","provider":"Project Weekend DIY","version":"1.0","type":"link"}