{"product_id":"general-finishes-liquid-oil-stain-salem-half-pint","title":"General Finishes Liquid Oil Stain, Salem, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Salem, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Salem swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSalem \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e540 g\/L in the Salem SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eSAHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice.  Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-09\/SDS-Oil-Based-Stain-Liquid-Salem-General%20Finishes-US-HCS-2012-v4-2021-05-15.pdf\"\u003eSalem safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257443638,"sku":"SAHP","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104536.jpg?v=1791582183","url":"https:\/\/projectweekenddiy.com\/products\/general-finishes-liquid-oil-stain-salem-half-pint","provider":"Project Weekend DIY","version":"1.0","type":"link"}