{"product_id":"general-finishes-high-performance-topcoat-gloss-pint","title":"General Finishes High Performance Topcoat, Gloss, Pint","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes High Performance Water-Based Topcoat, Gloss, Pint\u003c\/strong\u003e is a clear interior wood finish. This pint can covers about 65 to 75 sq ft per coat. Gloss is the highest of the five sheens, a bright, reflective finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Finishes High Performance Water-Based Topcoat\u003c\/strong\u003e protects interior wood with a clear finish. Apply it by brush, roller or sprayer, and choose the sheen that suits your project.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eResists water and household chemicals on cabinets, furniture and trim\u003c\/li\u003e\n\u003cli\u003eDry to the touch in 30 minutes or more; wait at least 2 hours before recoating\u003c\/li\u003e\n\u003cli\u003eWater-based, with soap-and-water cleanup\u003c\/li\u003e\n\u003cli\u003eFive sheens: Dead Flat, Flat, Satin, Semi-Gloss and Gloss\u003c\/li\u003e\n\u003cli\u003eGoes over raw wood, sealed finishes that pass an adhesion test, and oil-based finishes dried 72 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cp\u003eInterior furniture, cabinets, doors, trim and millwork, on raw wood or over a finish that passes an adhesion test. It is an interior product; for outdoor wood, use an exterior finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eWater-based polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheens\u003c\/th\u003e\n\u003ctd\u003eDead Flat, Flat, Satin, Semi-Gloss, Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003ePint 65 to 75 sq ft; quart 125 to 150 sq ft; gallon 500 to 600 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry to touch\u003c\/th\u003e\n\u003ctd\u003e30 minutes or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2 to 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush, roller or sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, 5% to 10% if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003ePTHG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 175 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSand raw wood smooth. On a finished piece, clean, scuff sand and test adhesion in a hidden spot.\u003c\/li\u003e\n\u003cli\u003eStir well.\u003c\/li\u003e\n\u003cli\u003eFor hand application, lay on a liberal wet coat along the grain. Use smooth strokes without pressure or repeated back-brushing.\u003c\/li\u003e\n\u003cli\u003eAllow at least 2 hours at 70 °F and 50% humidity. Cool or humid conditions, thick coats and sealed surfaces need longer. Sand lightly only when the finish powders, then recoat. Apply 2 to 3 coats.\u003c\/li\u003e\n\u003cli\u003eFor spraying, strain first and apply a 3 to 5 mil wet film. Check the tip with your equipment supplier; use the recommended NIOSH\/MSHA-approved respirator and ventilation.\u003c\/li\u003e\n\u003cli\u003eTreat it gently during the 21-day cure under ideal conditions.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not apply over white or light paint: General Finishes warns of yellowing.\u003c\/li\u003e\n\u003cli\u003eDo not use over linseed oil or Danish oil.\u003c\/li\u003e\n\u003cli\u003eOver oil-based stain or finish, let it dry at least 72 hours first.\u003c\/li\u003e\n\u003cli\u003eDo not mix Dead Flat with the other sheens.\u003c\/li\u003e\n\u003cli\u003eWarning: may cause an allergic skin reaction. Wear gloves and read the safety data sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between dry time and cure time?\u003c\/strong\u003e Touch-dry and recoat are separate stages. The listed times assume 70 °F and 50% humidity; full cure takes about 21 days. Wait longer when drying conditions differ.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e Multiply the area by the number of coats, then divide by the coverage for your can size. Allow for waste and absorbent wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e No. It is made for interior surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich sheen should I pick?\u003c\/strong\u003e Dead Flat and Flat have the least shine. Satin is in the middle; Semi-Gloss and Gloss are progressively shinier. Do not mix Dead Flat with another sheen.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673255117110,"sku":"PTHG","price":28.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016100163.jpg?v=1791582117","url":"https:\/\/projectweekenddiy.com\/products\/general-finishes-high-performance-topcoat-gloss-pint","provider":"Project Weekend DIY","version":"1.0","type":"link"}