{"product_id":"general-finishes-gel-stain-carbon-gray-half-pint","title":"General Finishes Gel Stain, Carbon Gray, Half Pint","description":"\u003cp\u003eGeneral Finishes Gel Stain in Carbon Gray, Half Pint, gives interior wood projects a heavy-bodied, wipe-on color finish. This half-pint can covers about 35–50 sq ft, depending on the wood and application. Test the complete stain-and-topcoat combination on your project first: wood species and existing finishes affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThick consistency helps even out color on blotchy woods such as pine.\u003c\/li\u003e\n\u003cli\u003eWipe-on application works with a brush, pad or absorbent cloth.\u003c\/li\u003e\n\u003cli\u003eCan refresh an existing finish after cleaning, sanding and an adhesion test.\u003c\/li\u003e\n\u003cli\u003eA second thin coat can deepen the color when the first coat is fully dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, cabinets, doors and trim. Use the color swatches as a starting point, then test on the actual wood. This stain is for indoor projects; it is not an exterior coating.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eCarbon Gray \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented gel stain \/ interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 35–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry, raw wood\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAllow 24 hours or longer on raw wood; 72 hours or longer over existing finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e30 days under recommended conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 coats of a compatible General Finishes topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural-bristle or foam brush, pad or absorbent cloth; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits; if thinning is needed, start at 5% and do not exceed 15% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 550 g\/L, matching color SDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eCHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePrepare raw wood with 120 then 150 grit. For existing finishes, clean with a 50:50 denatured alcohol\/water mix, dry, then scuff with 220–320 grit. Remove dust, let dry and test adhesion.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly. Work one manageable section at a time. Apply enough stain to keep the surface wet, then wipe excess evenly with the grain. Pull puddles from corners and details.\u003c\/li\u003e\n\u003cli\u003eLet dry fully before recoating. The times above assume about 70°F and 50% humidity; cool, humid conditions or an existing finish can take longer. Wait if the surface is tacky.\u003c\/li\u003e\n\u003cli\u003eSeal the dry stain with three coats of a compatible topcoat, following that product's instructions. Allow at least 72 hours, and complete drying, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eDo not leave a thick, paint-like coat. Black and Carbon Gray must be wiped back, never painted on without removing excess. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2023-10\/SDS-English-Gel-Stain-CARBON-GRAY-Oil-Base-General-Finishes-GHS-US-HCS-2012-v1-2023-10-13_0.PDF\"\u003eCarbon Gray safety data sheet\u003c\/a\u003e and container label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e the SDS warns of serious health hazards, including cancer. Use the specified protection and adequate ventilation; keep away from heat and flame. Immediately place soaked applicators in a sealed, water-filled metal container and dispose of them under local fire rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill this color look the same on every wood?\u003c\/strong\u003e No. Species, preparation and the old finish affect color; topcoat deepens it. Test the entire finish first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on an already finished cabinet?\u003c\/strong\u003e Yes, after cleaning, scuff sanding and a successful adhesion test. Allow longer drying than on raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes. Seal it with three coats of a compatible General Finishes topcoat after the stain is fully dry.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673249218870,"sku":"CHP","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016120048.jpg?v=1791581939","url":"https:\/\/projectweekenddiy.com\/products\/general-finishes-gel-stain-carbon-gray-half-pint","provider":"Project Weekend DIY","version":"1.0","type":"link"}