{"product_id":"general-finishes-flat-out-topcoat-clear-very-flat-pint","title":"General Finishes Flat Out Topcoat, Clear, Very Flat, Pint","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Flat Out Topcoat, Clear, Very Flat, Pint\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWax-like very flat look\u003c\/li\u003e\n\u003cli\u003eSelf-crosslinking acrylic\u003c\/li\u003e\n\u003cli\u003eWater-white in can, dries clear\u003c\/li\u003e\n\u003cli\u003eLess clarity and durability than High Performance\u003c\/li\u003e\n\u003cli\u003eShows fingerprints more than High Performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior low-use raw wood; Interior stained wood; Interior non-white painted wood; Decorative shelves and accent pieces; Properly primed MDF, HDF and Masonite\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear, Very Flat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eWater-based self-crosslinking acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e65-75 sq ft\/pint; 125-150 sq ft\/quart; 500-600 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eRecommended 70°F and 50% humidity, out of direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 total coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Roll; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5%, up to 10% by volume; TDS also lists GF Extender and Accelerator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water for hands; GF Brush \u0026amp; Gun Cleaner for equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eTDS 210 g\/L; current page \u0026lt;250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; TDS suggests 1-2 coats GF gloss or semi-gloss topcoat underneath for clarity on dark colors; let oil finishes dry 72+ hours before application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eFPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Raw wood: sand no finer than 220 grit and remove dust; Fresh stain: allow to dry completely; do not sand; Existing sealed wood: scuff with 50:50 denatured alcohol and water, dry, sand 220-320 grit, remove dust.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare and clean substrate\u003c\/li\u003e\n\u003cli\u003eStir thoroughly; do not shake\u003c\/li\u003e\n\u003cli\u003eTest adhesion over existing finish\u003c\/li\u003e\n\u003cli\u003eApply by brush, roll or spray; 3 total coats\u003c\/li\u003e\n\u003cli\u003eSand lightly between coats and remove dust\u003c\/li\u003e\n\u003cli\u003eAllow 21 days for full cure\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Kitchen cabinets and tabletops; Medium- or high-use pieces; White or light paint due to yellowing; Exterior use.\u003c\/p\u003e\u003cp\u003eNo signal word: 2021 SDS: not classified; no known significant effects or critical hazards.\u003c\/p\u003e\u003cp\u003e: Current product page: California Prop 65 statement says no listed chemicals found in this product.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 65-75 sq ft\/pint; 125-150 sq ft\/quart; 500-600 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2+ hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-topcoats-and-sanding-sealer\/flat-out-flat-water-based-topcoat\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673255182646,"sku":"FPT","price":28.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016110421.jpg?v=1791582122","url":"https:\/\/projectweekenddiy.com\/products\/general-finishes-flat-out-topcoat-clear-very-flat-pint","provider":"Project Weekend DIY","version":"1.0","type":"link"}