{"product_id":"general-finishes-enduro-2k-clear-poly-tint-base-gloss-gallon","title":"General Finishes Enduro 2K Clear Poly Tint Base, Gloss, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro 2K Clear Poly Tint Base, Gloss, Gallon\u003c\/strong\u003e is intended for interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-component post-catalyzed urethane\u003c\/li\u003e\n\u003cli\u003eTintable and 10% short-filled\u003c\/li\u003e\n\u003cli\u003eHigh water and chemical resistance\u003c\/li\u003e\n\u003cli\u003eInterior\/exterior use\u003c\/li\u003e\n\u003cli\u003eFive-day cure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior or exterior raw or stained wood; Cabinets; Furniture; Woodwork; Pre-primed steel; Fiberglass\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear tint base, Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater-based, two-component urethane with required NCO catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1+ hour in specifications; 30 minutes to 2 hours in application instructions depending on heat and airflow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3; or 3-4 total if using Sanding Sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray: HVLP; Air-assisted airless; Airless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eAfter NCO catalyst, add distilled water up to 10% by volume if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eGF Brush and Gun Cleaner for spray gun immediately after use; soap and water for water-based finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eGloss \u0026lt;215 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; 1-2 coats Enduro Sanding Sealer optional for improved build. Requires Enduro NCO Catalyst.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB786-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand raw wood no finer than 220 grit; Scuff clean sealed surfaces with nonwoven pad and 50:50 alcohol\/water, dry and sand 220-320 grit; Prime tinted application over sealed surfaces; Test adhesion.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare and test substrate; prime when specified\u003c\/li\u003e\n\u003cli\u003eStir; add up to 10% NCO Catalyst by volume and mix 2-3 minutes\u003c\/li\u003e\n\u003cli\u003eRest 15 minutes; strain and spray at 3-5 mil wet film\u003c\/li\u003e\n\u003cli\u003eSand between coats and apply 2-3 coats\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Deck surfaces; Over white paint due to yellowing risk; Linseed or Danish oil finishes.\u003c\/p\u003e\u003cp\u003eNone: Uncatalyzed Gloss base SDS is not classified as hazardous.\u003c\/p\u003e\u003cp\u003eDanger: Required NCO Catalyst is combustible; harmful if inhaled; causes serious eye damage and skin irritation; may cause skin allergy and respiratory irritation.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 450 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1+ hour in specifications; 30 minutes to 2 hours in application instructions depending on heat and airflow. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-professional-water-based\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673261474102,"sku":"B786-L","price":154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121656_1_0124.jpg?v=1791582283","url":"https:\/\/projectweekenddiy.com\/products\/general-finishes-enduro-2k-clear-poly-tint-base-gloss-gallon","provider":"Project Weekend DIY","version":"1.0","type":"link"}