{"title":"Zinsser Peel Stop Binding Primers","description":"\u003cdiv class=\"collection-intro\"\u003e\n\u003cp\u003eZinsser Peel Stop is a family of water-based binding primers for old paint that is peeling, chalking, checking or cracking. Instead of stripping every last flake, you scrape off what is loose, then Peel Stop soaks into the edges of the old coating and glues it down so the new paint has a sound base. Peel Stop Clear Binding Sealer is the thin, penetrating version. Peel Stop Triple Thick is the high-build white version that Zinsser says goes on three times thicker than regular primers, so it fills and seals cracked, weathered surfaces. Both work inside and out and take any latex or alkyd paint after 2 hours. Everything on this page comes from Zinsser's technical data sheets, safety data sheets and product pages.\u003c\/p\u003e\n\u003ch2\u003ePeel Stop products we carry\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eZinsser part #\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/zinsser-peel-stop-bonding-primer-white-quart\"\u003ePeel Stop Clear Binding Sealer\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003ctd\u003e60004\u003c\/td\u003e\n\u003ctd\u003eChalky or lightly peeling paint, face checking, small areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/zinsser-peel-stop-bonding-primer-white-gallon\"\u003ePeel Stop Clear Binding Sealer\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003ctd\u003e60001\u003c\/td\u003e\n\u003ctd\u003eSiding, fences and walls with chalky or peeling paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/triple-thick-binding-primer\"\u003ePeel Stop Triple Thick Binding Primer, White\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003ctd\u003e260925\u003c\/td\u003e\n\u003ctd\u003eCracked, weathered trim, sashes, doors and spot repairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/zinsser-peel-stop-triple-thick-binding-primer-white-gallon\"\u003ePeel Stop Triple Thick Binding Primer, White\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003ctd\u003e260924\u003c\/td\u003e\n\u003ctd\u003eBigger cracked or alligatored surfaces that need a smoother base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eClear Binding Sealer vs Triple Thick: specs from Zinsser\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003ePeel Stop Clear Binding Sealer\u003c\/th\u003e\n\u003cth\u003ePeel Stop Triple Thick\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhat it is\u003c\/td\u003e\n\u003ctd\u003eFlexible water-based binding sealer that penetrates and binds chalky residue\u003c\/td\u003e\n\u003ctd\u003eHigh-build water-based acrylic binding primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDries\u003c\/td\u003e\n\u003ctd\u003eClear, to a slight sheen\u003c\/td\u003e\n\u003ctd\u003eWhite, for contrast under the finish coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003ePeeling, chalking or cracking paint; seals face checking so the finish coat is less likely to crack\u003c\/td\u003e\n\u003ctd\u003eCracked, weathered and peeling surfaces; fills and seals cracks for a smoother, more uniform surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e300 to 400 sq ft per gallon\u003c\/td\u003e\n\u003ctd\u003e50 to 200 sq ft per gallon, depending on how thick you build it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApply at\u003c\/td\u003e\n\u003ctd\u003e50 to 90°F, humidity below 85%\u003c\/td\u003e\n\u003ctd\u003e40 to 90°F, surface 5°F above the dew point, humidity 85% or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry time (70 to 80°F, 50% RH)\u003c\/td\u003e\n\u003ctd\u003eTouch 30 minutes; paint in 2 hours\u003c\/td\u003e\n\u003ctd\u003eTouch 30 minutes; paint in 2 hours. A 30 mil wet coat can take 3 hours to touch and 6 hours to recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC\u003c\/td\u003e\n\u003ctd\u003eUnder 60 g\/L\u003c\/td\u003e\n\u003ctd\u003eUnder 100 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClean up\u003c\/td\u003e\n\u003ctd\u003eDetergent and warm water\u003c\/td\u003e\n\u003ctd\u003eSoap and warm water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety data sheet\u003c\/td\u003e\n\u003ctd\u003eNo signal word; does not support combustion\u003c\/td\u003e\n\u003ctd\u003eDanger signal word (H350, from a minor ingredient); does not support combustion. Read the SDS before use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to prime peeling or cracked paint (Zinsser directions)\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrape and clean.\u003c\/strong\u003e Remove loose and peeling paint, then wash with detergent or soap and water. Zinsser suggests JOMAX Mildew Killer and House Cleaner to pressure wash mildew off exterior surfaces. Sand the remaining paint edges smooth and let the surface dry completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck for lead.\u003c\/strong\u003e Homes painted before 1978 may have lead paint. Zinsser warns that scraping or sanding can release lead dust; wear a NIOSH-approved respirator and clean up with a HEPA vacuum and a wet mop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlock stains first if needed.\u003c\/strong\u003e Peel Stop does not block stains. For water stains or bleeding woods, Zinsser points to Cover-Stain, and to B-I-N for knots and severe stains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply.\u003c\/strong\u003e Use a synthetic brush, a 1\/2 in nap roller or an airless sprayer, and work the primer into cracks and the edges of the old paint. For Triple Thick, apply lightly for basic priming or build several thick coats to bridge and fill cracks, no more than 30 mils wet per coat. On severely peeled surfaces Zinsser says to thin the first Triple Thick coat with 10% water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat.\u003c\/strong\u003e Paint with any latex or alkyd paint after 2 hours, or let it dry overnight in cool or damp weather. Don't apply if rain is expected within 8 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePeel Stop is not a substitute for wood filler, caulk or drywall mud, and it is not for floors, decks, below-grade surfaces or anything under water. For holes and gouges, see \u003ca href=\"\/collections\/wood-filler-putty\"\u003ewood filler and wood putty\u003c\/a\u003e. For gaps and joints, see \u003ca href=\"\/collections\/caulk-sealants\"\u003ecaulk and sealants\u003c\/a\u003e. For cracks in concrete, see \u003ca href=\"\/collections\/concrete-masonry-sealers\"\u003econcrete sealers and crack repair\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eShop related: \u003ca href=\"\/collections\/zinsser\"\u003eall Zinsser products\u003c\/a\u003e, \u003ca href=\"\/collections\/zinsser-bulls-eye-1-2-3\"\u003eZinsser Bulls Eye 1-2-3 primer\u003c\/a\u003e, \u003ca href=\"\/collections\/primers-sealers\"\u003eprimers and sealers\u003c\/a\u003e and \u003ca href=\"\/collections\/prep-patch-specialty-coatings\"\u003eprep, patch and repair\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs Peel Stop a primer for cracked or crazed paint?\u003c\/summary\u003e\u003cp\u003eYes. Zinsser makes both for cracking paint. The Clear Binding Sealer bridges face checking so the finish coat is less likely to crack. Triple Thick builds a thicker film that fills and seals cracked, weathered surfaces; Zinsser says several thick coats will bridge and fill cracked and uneven areas.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan Peel Stop fill large cracks?\u003c\/summary\u003e\u003cp\u003eNo. Zinsser says Peel Stop Triple Thick is not a substitute for wood filler, caulk or drywall mud. Fill or caulk real gaps first, then prime.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich one should I buy?\u003c\/summary\u003e\u003cp\u003ePick the Clear Binding Sealer for chalky or lightly peeling paint where you want a thin, penetrating coat with more coverage (300 to 400 sq ft per gallon). Pick Triple Thick when the surface is cracked or rough and you want a smoother white base (50 to 200 sq ft per gallon).\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use Peel Stop indoors?\u003c\/summary\u003e\u003cp\u003eYes. Zinsser lists interior uses such as previously painted drywall, plaster, walls, ceilings, doors, windows, baseboards and trim, as well as exterior siding, fences, masonry, stucco and gutters.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it in cold weather?\u003c\/summary\u003e\u003cp\u003eOnly within Zinsser's range: air, product and surface at 40 to 90°F for Triple Thick and 50 to 90°F for the Clear Binding Sealer. Cool, humid weather slows drying.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eShipping and returns?\u003c\/summary\u003e\u003cp\u003e$5.99 shipping, free on orders of $35 or more within the 48 contiguous states and Washington, DC. We offer 30-day returns on unused, unopened items; opened paint can't be returned. See our \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e. If an order arrives damaged, defective or wrong, email \u003ca href=\"mailto:Store@projectweekenddiy.com\"\u003eStore@projectweekenddiy.com\u003c\/a\u003e with photos and we will make it right.\u003c\/p\u003e\u003c\/details\u003e\n\u003cp\u003e\u003csmall\u003eSources: Zinsser Peel Stop Triple Thick Primer technical data sheet PST-01 (rev 01\/28\/22) and Rust-Oleum support article for Peel Stop Triple Thick (updated Jan 2, 2026); Zinsser Peel Stop Clear Binding Sealer technical data sheet PST-02 (rev 12\/10\/21); Rust-Oleum safety data sheets 260924 (rev 9\/16\/2026) and 60001 (rev 7\/10\/2023); Peel Stop Triple Thick product page on rustoleum.com.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n","products":[{"product_id":"triple-thick-binding-primer","title":"Zinsser Peel Stop Triple Thick Binding Primer, White, Quart","description":"\u003ch2\u003ePeel Stop Triple Thick, one quart (Zinsser 260925)\u003c\/h2\u003e\n\u003cp\u003eOld paint that is checking, curling and flaking on a window sash, a porch post or a stretch of trim usually can't all be stripped. Peel Stop Triple Thick is Zinsser's answer for that situation: a water-based acrylic binding primer that soaks into and glues down the old coating, then builds three times thicker than an ordinary primer to fill hairline cracks and even out a weathered surface. It dries white so the finish coat is easy to judge, stays flexible as wood swells and shrinks, and takes any latex or alkyd paint after 2 hours. It is MPI #17 certified.\u003c\/p\u003e\n\u003cp\u003e$5.99 shipping, free at $35+ (lower 48 + DC). \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e$5.99 shipping, free at $35+, no code needed (lower 48 + DC). 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eHow much a quart handles\u003c\/h3\u003e\n\u003cp\u003eZinsser rates it at 50 to 200 sq ft per gallon depending on film thickness and porosity, so a quart covers about 12 to 50 sq ft. Thin coats for basic priming reach the high end; thick crack-bridging coats reach the low end. That makes the quart a sensible size for a door, a few sashes or spot repairs; bigger jobs fit the \u003ca href=\"\/products\/zinsser-peel-stop-triple-thick-binding-primer-white-gallon\"\u003egallon\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eApplication tools (Zinsser TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrush: synthetic nylon, polyester or blend; push the primer into cracks and edges.\u003c\/li\u003e\n\u003cli\u003eRoller: 1\/2 in nap, rolled on thick, then worked into the peeling areas.\u003c\/li\u003e\n\u003cli\u003eAirless: 0.015 to 0.017 in tip at 2000 to 2500 psi, overlapping each pass 1 to 2 in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApply when air, product and surface are 40 to 90 F, the surface is 5 F above the dew point and humidity is 85% or lower. Touch-dry in 30 minutes. Don't apply if rain is expected within 8 hours.\u003c\/p\u003e\n\u003ch3\u003eBefore you start\u003c\/h3\u003e\n\u003cp\u003eWash off dirt and chalk; Zinsser suggests its JOMAX Mildew Killer and House Cleaner for exterior mildew. Bare wood left exposed more than 4 weeks should be lightly sanded to remove weathered fibers. Spot-prime knots and severe stains with B-I-N shellac primer, and use a stain blocker such as \u003ca href=\"\/products\/zinsser-cover-stain-oil-based-primer-white-quart\"\u003eCover-Stain\u003c\/a\u003e where water stains or bleeding woods are the issue. Zinsser's TDS warns that scraping or sanding old paint may release lead dust and points to the National Lead Information Hotline, 1-800-424-LEAD, for protection guidance. Cleanup is soap and warm water.\u003c\/p\u003e\n\u003cp\u003ePrefer a clear binder for chalky paint? Regular Peel Stop comes in a \u003ca href=\"\/products\/zinsser-peel-stop-bonding-primer-white-quart\"\u003equart\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I prime a badly peeling surface?\u003c\/strong\u003e Zinsser's TDS says to scrape loose paint, wash, sand remaining edges smooth, then thin the first coat of Peel Stop Triple Thick with 10% water and work it into the peeling paint. Follow with thicker coats to bridge and fill cracked, uneven areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick can I put it on?\u003c\/strong\u003e Up to 30 mils wet per application. Zinsser warns that going past 30 mils may cause mud cracking or sagging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on a deck or as filler?\u003c\/strong\u003e No. Zinsser says it is not designed as a substitute for wood filler, caulk or drywall mud, and it is not recommended for floors, decks, surfaces under water or in prolonged water contact, or below grade.\u003c\/p\u003e\n\u003cp\u003eTriple Thick facts are from Zinsser technical data sheet PST-01. More primers: \u003ca href=\"\/collections\/primers-sealers\"\u003eprimers and sealers\u003c\/a\u003e and \u003ca href=\"\/collections\/zinsser\"\u003eZinsser\u003c\/a\u003e.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":53527988797750,"sku":"526-378","price":21.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/zinsser-peel-stop-3-thick-primer-quart-7241824.jpg?v=1767497547"},{"product_id":"zinsser-peel-stop-bonding-primer-white-quart","title":"Zinsser Peel Stop Clear Binding Sealer, Quart","description":"\u003cp\u003eZinsser Peel Stop Clear Binding Sealer (SKU 60004) is a water-based vinyl-acrylic binding sealer for peeling, chalking or cracking paint. Per Rust-Oleum TDS PST-02, it penetrates and glues down loose edges, binds chalky residue, and acts as a flexible bridging sealer so the finish coat is less likely to crack. It is for interior and exterior use on previously painted wood, drywall, plaster, masonry, metal gutters, vinyl and aluminum siding, and similar surfaces listed on the TDS. Topcoat with any latex or alkyd paint.\u003c\/p\u003e\n\u003cp\u003eWhen properly applied it dries to a slight sheen (clear when dry). Tinting is not recommended. For a thicker white bridging primer on severely cracked surfaces, see \u003ca href=\"\/products\/triple-thick-binding-primer\"\u003ePeel Stop Triple Thick\u003c\/a\u003e. For stain blocking after Peel Stop, Zinsser points to Bulls Eye 1-2-3 or Cover Stain before the finish coat.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based vinyl-acrylic clear binding sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eQuart (SKU 60004)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 60 g\/L (TDS PST-02)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 300 to 400 sq ft\/gal (roughly 75 to 100 sq ft\/quart), varies with porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry at 70 to 80 F, 50% RH\u003c\/th\u003e\n\u003ctd\u003eTouch 30 minutes; prime or paint in 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e50 to 90 F; relative humidity below 85%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic brush, roller or airless sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eDetergent and warm water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply (PST-02)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClean, dry and sound. Remove peeling or unsound coatings. Sand glossy areas and feather edges.\u003c\/li\u003e\n\u003cli\u003eApply so the film dries to a slight sheen. Add a second coat if dull spots remain.\u003c\/li\u003e\n\u003cli\u003eTopcoat with latex or alkyd. For a more uniform topcoat, prime with Bulls Eye 1-2-3 or Cover Stain first.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eLimits (TDS)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a substitute for fixing chronic moisture problems.\u003c\/li\u003e\n\u003cli\u003eNot for floors, exterior decks, immersion or prolonged water contact.\u003c\/li\u003e\n\u003cli\u003eDo not apply if rain is expected within 8 hours of priming or topcoating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSource: Rust-Oleum TDS PST-02 (Zinsser Peel Stop Clear Binding Sealer)\u003c\/p\u003e\n","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":67673349292342,"sku":"526-350","price":14.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/047719600046.jpg?v=1791583829"},{"product_id":"zinsser-peel-stop-bonding-primer-white-gallon","title":"Zinsser Peel Stop Clear Binding Sealer, Gallon","description":"\u003cp\u003eZinsser Peel Stop Clear Binding Sealer (Zinsser part 60001) is a water-based vinyl-acrylic binding sealer for peeling, chalking or cracking paint. Per Zinsser TDS PST-02, it penetrates and glues down loose edges, binds chalky residue, and acts as a flexible bridging sealer so the finish coat is less likely to crack. It is for interior and exterior use on previously painted surfaces. Topcoat with any latex or alkyd paint. This is the gallon; it also comes in a \u003ca href=\"\/products\/zinsser-peel-stop-bonding-primer-white-quart\"\u003equart\u003c\/a\u003e here.\u003c\/p\u003e\n\u003cp\u003eWhen properly applied it dries clear, to a slight sheen. For a thicker white primer that fills severely cracked surfaces, see \u003ca href=\"\/products\/triple-thick-binding-primer\"\u003ePeel Stop Triple Thick\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInterior and exterior water-base\u003c\/li\u003e\n\u003cli\u003eBinds cracking, chalking and peeling paint\u003c\/li\u003e\n\u003cli\u003eGlues down cracks and gaps under edges of old paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear (slight sheen when dry)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e300 to 400 sq ft per gallon, depending on application method and surface porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time at 70 to 80 F, 50% RH\u003c\/th\u003e\n\u003ctd\u003eTouch 30 minutes; prime or paint in 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply at\u003c\/th\u003e\n\u003ctd\u003e50 to 90 F; relative humidity below 85%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 60 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003ctd\u003eZinsser TDS PST-02, rev 12\/10\/21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":67673350144310,"sku":"526-368","price":46.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/047719600015.jpg?v=1791583831"},{"product_id":"zinsser-peel-stop-triple-thick-binding-primer-white-gallon","title":"Zinsser Peel Stop Triple Thick Binding Primer, White, Gallon","description":"\u003cp\u003e\u003cstrong\u003eZinsser Peel Stop Triple Thick\u003c\/strong\u003e is a high-build, water-based acrylic binding primer that locks down peeling paint and seals cracked, worn and weathered surfaces. Zinsser says it goes on three times thicker than regular primers, so it fills and seals cracks and leaves a smoother, more uniform base for paint. It dries white and can be topcoated with any latex or alkyd paint in 2 hours. This is the gallon; it also comes in a \u003ca href=\"\/products\/triple-thick-binding-primer\"\u003equart\u003c\/a\u003e here.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBinds down peeling, cracked and weathered paint so the new coat has a sound base\u003c\/li\u003e\n\u003cli\u003eCan be applied up to 30 mils wet per coat without sagging; one coat primes most surfaces\u003c\/li\u003e\n\u003cli\u003eFlexible film that moves with wood as it expands and contracts\u003c\/li\u003e\n\u003cli\u003eInterior and exterior: previously painted wood, baseboards, doors, trim, windows, walls, laminated wood, plywood, PVC and plastic, brick, stucco, masonry, concrete, plaster, aluminum siding, gutters, galvanized steel and fiberglass\u003c\/li\u003e\n\u003cli\u003eUnder 100 g\/L VOC; soap and water cleanup; MPI #17 certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs (Zinsser TDS)\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eWater-based acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eGallon (Zinsser part 260924)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e50 to 200 sq ft per gallon, depending on application and surface porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time at 70 to 80 F, 50% RH\u003c\/th\u003e\n\u003ctd\u003eTouch 30 minutes; prime or paint in 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply at\u003c\/th\u003e\n\u003ctd\u003e40 to 90 F air, material and surface, surface at least 5 F above dew point, humidity 85% or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 100 g\/L (0.83 lb\/gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eAny latex or alkyd paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and warm water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003ctd\u003eZinsser TDS PST-01, rev 01\/28\/22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch4\u003eDoes Peel Stop Triple Thick block stains?\u003c\/h4\u003e\u003cp\u003eNo. Zinsser says to use a stain-blocking primer such as \u003ca href=\"\/products\/zinsser-cover-stain-oil-based-primer-white-quart\"\u003eCover-Stain\u003c\/a\u003e or \u003ca href=\"\/collections\/shellac\"\u003eB-I-N\u003c\/a\u003e over water stains or bleeding woods. Peel Stop Triple Thick is for binding peeling paint and building a smooth surface.\u003c\/p\u003e\u003ch4\u003eHow is Triple Thick different from regular Peel Stop?\u003c\/h4\u003e\u003cp\u003eTriple Thick is the high-build version. Zinsser says it goes on three times thicker, so besides binding peeling paint it also fills cracks and smooths rough, weathered paint before the topcoat. Regular \u003ca href=\"\/products\/zinsser-peel-stop-bonding-primer-white-quart\"\u003ePeel Stop\u003c\/a\u003e is also here.\u003c\/p\u003e\u003ch4\u003eCan I use it instead of caulk, filler or drywall mud?\u003c\/h4\u003e\u003cp\u003eNo. Zinsser says it is not a substitute for wood filler, caulk or drywall mud, and it is not for floors, decks, surfaces under water or below grade, or polyethylene, polypropylene, Teflon or nylon.\u003c\/p\u003e\u003ch4\u003eHow do I apply it over badly peeled paint?\u003c\/h4\u003e\u003cp\u003eScrape off loose paint first. For severely peeled surfaces Zinsser says to thin the first coat with 10% water and work it into the peeling paint, then follow with full coats up to 30 mils wet. Outdoors, do not apply if rain is expected within 8 hours.\u003c\/p\u003e\n\u003cp\u003eCompare every Zinsser binding, bonding and stain-blocking primer on \u003ca href=\"\/collections\/primers-sealers\"\u003eprimers and sealers\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/zinsser\"\u003eZinsser\u003c\/a\u003e.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":67673350668598,"sku":"526-379","price":51.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/020066209377.jpg?v=1791583833"}],"url":"https:\/\/projectweekenddiy.com\/collections\/zinsser-peel-stop.oembed","provider":"Project Weekend DIY","version":"1.0","type":"link"}