{"title":"ZAR","description":"\u003cdiv class=\"collection-intro\"\u003e\n\u003cp\u003eZAR (United Gilsonite Laboratories) makes interior oil-base wiping stains and clear polyurethane topcoats for furniture, cabinets, floors, and exterior woodwork. This brand collection covers the ZAR products currently ACTIVE in the Project Weekend DIY store: Interior Oil Base Stain color lineup plus Interior OMU Poly, Interior Oil-Based Poly, Exterior Water-Based Poly HP, and Exterior Oil-Based Ultraviolet Poly.\u003c\/p\u003e\n\u003cp\u003ePer ZAR \/ UGL product literature on our live listings: Interior Oil Base Stain is a translucent oil-based wiping stain with controlled penetration for even color; maker directions list lint-free cloth, foam, or natural-bristle brush, with optional second coat when dry, and mineral-spirits cleanup. Interior OMU Poly is a water-based oil-modified urethane with a natural amber tone, self-leveling film, soap-and-water cleanup, about 400–500 sq ft per gallon, recoat in about 2 hours, and child-safe when dry. Interior Oil-Based Poly is a clear self-leveling oil polyurethane for floors, cabinets, furniture, and woodwork (about 500–600 sq ft per gallon; mineral spirits cleanup). Exterior Water-Based Poly HP is a non-yellowing clear with UV protection for doors, patio furniture, and above-waterline marine woodwork (not for decks or foot traffic). Exterior Oil-Based Ultraviolet Poly adds UV absorbers and antioxidants for exterior woodwork and doors (at least 3 coats; not for decks).\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLine\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003cth\u003eWhat we carry\u003c\/th\u003e\n\u003cth\u003eNotes (maker)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterior Oil Base Stain\u003c\/td\u003e\n\u003ctd\u003eFurniture, cabinets, trim; decorative glazing\u003c\/td\u003e\n\u003ctd\u003eMulti-color half pints and quarts\u003c\/td\u003e\n\u003ctd\u003eOil wiping stain; controlled penetration; mineral spirits cleanup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterior OMU Poly\u003c\/td\u003e\n\u003ctd\u003eFloors, cabinets, furniture, countertops\u003c\/td\u003e\n\u003ctd\u003eClear Satin gallon\u003c\/td\u003e\n\u003ctd\u003eWater-based oil-modified urethane; recoat ~2 hr; soap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterior Oil-Based Poly\u003c\/td\u003e\n\u003ctd\u003eFloors, cabinets, furniture, woodwork\u003c\/td\u003e\n\u003ctd\u003eClear Gloss\/Satin\/Matte quarts; Matte gallon\u003c\/td\u003e\n\u003ctd\u003eOil polyurethane; self-leveling; mineral spirits cleanup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExterior Water-Based Poly HP\u003c\/td\u003e\n\u003ctd\u003eDoors, patio furniture, above-waterline marine\u003c\/td\u003e\n\u003ctd\u003eClear Satin quart and gallon\u003c\/td\u003e\n\u003ctd\u003eNon-yellowing; UV protection; not for decks\/foot traffic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExterior Oil-Based UV Poly\u003c\/td\u003e\n\u003ctd\u003eExterior woodwork, doors, patio furniture\u003c\/td\u003e\n\u003ctd\u003eClear Gloss\/Satin quarts; Satin gallon\u003c\/td\u003e\n\u003ctd\u003eUV absorbers; ≥3 coats; not for decks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eShop related: \u003ca href=\"\/collections\/ugl\"\u003eUGL\u003c\/a\u003e, \u003ca href=\"\/collections\/varathane\"\u003eVarathane\u003c\/a\u003e, \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e, and \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs ZAR the same as UGL?\u003c\/summary\u003e\u003cp\u003eZAR is UGL's wood-finish brand. Our store lists most ZAR SKUs under vendor ZAR; a separate UGL collection covers products still tagged vendor UGL.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat topcoat goes over Interior Oil Base Stain?\u003c\/summary\u003e\u003cp\u003eMaker directions on our stain listings point to compatible ZAR Water Base or Oil Base Poly for protection after the stain is dry. Follow the topcoat label for recoat and cure.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eOMU vs oil-based poly—what's the difference?\u003c\/summary\u003e\u003cp\u003eOMU is a water-based oil-modified urethane (soap-and-water cleanup, amber tone). Interior Oil-Based Poly is a traditional oil polyurethane cleaned with mineral spirits.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan Exterior Poly HP go on a deck?\u003c\/summary\u003e\u003cp\u003eNo. Maker use limits on our Exterior Water-Based Poly HP and Exterior Oil-Based UV Poly listings exclude decks and other foot-traffic areas.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I apply Interior Oil Base Stain?\u003c\/summary\u003e\u003cp\u003eLiterature lists lint-free cloth, foam applicator, or natural-bristle brush. Stir during use, wipe excess with the grain, and test color on a scrap first.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e","products":[{"product_id":"zar-interior-oil-base-stain-aged-bourbon-half-pint","title":"ZAR Interior Oil Base Stain, Aged Bourbon, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Aged Bourbon, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAged Bourbon \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11506\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/115-zar-aged-bourbon-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330450742,"sku":"11506","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941115067.jpg?v=1791583655"},{"product_id":"zar-interior-oil-base-stain-mocha-half-pint","title":"ZAR Interior Oil Base Stain, Mocha, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Mocha, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMocha \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/119-zar-mocha-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330483510,"sku":"11906","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941119065.jpg?v=1791583657"},{"product_id":"zar-interior-oil-base-stain-premium-teak-half-pint","title":"ZAR Interior Oil Base Stain, Premium Teak, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Premium Teak, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003ePremium Teak \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/120-zar-premium-teak-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330549046,"sku":"12006","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941120061.jpg?v=1791583659"},{"product_id":"zar-interior-oil-base-stain-baby-grand-half-pint","title":"ZAR Interior Oil Base Stain, Baby Grand, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Baby Grand, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBaby Grand \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/121-zar-baby-grand-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330581814,"sku":"12106","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941121068.jpg?v=1791583661"},{"product_id":"zar-interior-oil-base-stain-dark-chocolate-truffle-half-pint","title":"ZAR Interior Oil Base Stain, Dark Chocolate Truffle, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Dark Chocolate Truffle, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eDark Chocolate Truffle \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/123-zar-dark-chocolate-truffle-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330614582,"sku":"12306","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941123062.jpg?v=1791583663"},{"product_id":"zar-interior-oil-base-stain-golden-sunset-half-pint","title":"ZAR Interior Oil Base Stain, Golden Sunset, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Golden Sunset, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGolden Sunset \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12706\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/127-zar-golden-sunset-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330647350,"sku":"12706","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941127060.jpg?v=1791583665"},{"product_id":"zar-interior-oil-base-stain-mink-half-pint","title":"ZAR Interior Oil Base Stain, Mink, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Mink, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMink \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12806\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/128-zar-mink-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330680118,"sku":"12806","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941128067.jpg?v=1791583668"},{"product_id":"zar-interior-oil-base-stain-beach-house-half-pint","title":"ZAR Interior Oil Base Stain, Beach House, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Beach House, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBeach House \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e13906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Causes skin irritation. Repeated exposure can damage organs. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/139-zar-beach-house-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330745654,"sku":"13906","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941139063.jpg?v=1791583672"},{"product_id":"zar-interior-oil-base-stain-silk-gray-half-pint","title":"ZAR Interior Oil Base Stain, Silk Gray, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Silk Gray, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSilk Gray \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e17006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/170-zar-silk-gray-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330909494,"sku":"17006","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941170066.jpg?v=1791583674"},{"product_id":"zar-interior-oil-base-stain-malibu-gray-half-pint","title":"ZAR Interior Oil Base Stain, Malibu Gray, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Malibu Gray, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMalibu Gray \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e17106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/171-zar-malibu-gray-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330975030,"sku":"17106","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941171063.jpg?v=1791583677"},{"product_id":"zar-interior-oil-base-stain-oiled-leather-half-pint","title":"ZAR Interior Oil Base Stain, Oiled Leather, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Oiled Leather, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eOiled Leather \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/503-zar-oiled-leather-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331007798,"sku":"50306","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941503062.jpg?v=1791583680"},{"product_id":"zar-interior-oil-base-stain-gray-cashmere-half-pint","title":"ZAR Interior Oil Base Stain, Gray Cashmere, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Gray Cashmere, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGray Cashmere \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50406\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/504-zar-gray-cashmere-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331040566,"sku":"50406","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941504069.jpg?v=1791583683"},{"product_id":"zar-interior-oil-base-stain-champagne-half-pint","title":"ZAR Interior Oil Base Stain, Champagne, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Champagne, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eChampagne \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50806\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/508-zar-champagne-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331106102,"sku":"50806","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941508067.jpg?v=1791583685"},{"product_id":"zar-interior-oil-base-stain-blue-moon-half-pint","title":"ZAR Interior Oil Base Stain, Blue Moon, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Blue Moon, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBlue Moon \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/509-zar-blue-moon-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331171638,"sku":"50906","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941509064.jpg?v=1791583688"},{"product_id":"zar-interior-oil-base-stain-moroccan-red-half-pint","title":"ZAR Interior Oil Base Stain, Moroccan Red, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Moroccan Red, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMoroccan Red \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e51706\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/517-zar-moroccan-red-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331204406,"sku":"51706","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941517069.jpg?v=1791583690"},{"product_id":"zar-interior-oil-base-stain-exotic-redwood-half-pint","title":"ZAR Interior Oil Base Stain, Exotic Redwood, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Exotic Redwood, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eExotic Redwood \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e51806\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/518-zar-exotic-redwood-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331237174,"sku":"51806","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941518066.jpg?v=1791583694"},{"product_id":"zar-interior-oil-base-stain-black-caviar-half-pint","title":"ZAR Interior Oil Base Stain, Black Caviar, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Black Caviar, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBlack Caviar \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e13506\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/135-zar-black-caviar-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331269942,"sku":"13506","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941135065.jpg?v=1791583696"},{"product_id":"zar-interior-oil-base-stain-aged-bourbon-quart","title":"ZAR Interior Oil Base Stain, Aged Bourbon, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Aged Bourbon, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAged Bourbon \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11512\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/115-zar-aged-bourbon-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331466550,"sku":"11512","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941115128.jpg?v=1791583699"},{"product_id":"zar-interior-oil-base-stain-mocha-quart","title":"ZAR Interior Oil Base Stain, Mocha, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Mocha, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMocha \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/119-zar-mocha-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331728694,"sku":"11912","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941119126.jpg?v=1791583702"},{"product_id":"zar-interior-oil-base-stain-baby-grand-quart","title":"ZAR Interior Oil Base Stain, Baby Grand, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Baby Grand, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBaby Grand \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/121-zar-baby-grand-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331761462,"sku":"12112","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941121129.jpg?v=1791583705"},{"product_id":"zar-interior-oil-base-stain-dark-chocolate-truffle-quart","title":"ZAR Interior Oil Base Stain, Dark Chocolate Truffle, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Dark Chocolate Truffle, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eDark Chocolate Truffle \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/123-zar-dark-chocolate-truffle-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331892534,"sku":"12312","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941123123.jpg?v=1791583708"},{"product_id":"zar-interior-oil-base-stain-golden-sunset-quart","title":"ZAR Interior Oil Base Stain, Golden Sunset, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Golden Sunset, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGolden Sunset \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12712\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/127-zar-golden-sunset-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331925302,"sku":"12712","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941127121.jpg?v=1791583711"},{"product_id":"zar-interior-oil-base-stain-mink-quart","title":"ZAR Interior Oil Base Stain, Mink, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Mink, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMink \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/128-zar-mink-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331958070,"sku":"12812","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941128128.jpg?v=1791583714"},{"product_id":"zar-interior-oil-base-stain-vintage-modern-quart","title":"ZAR Interior Oil Base Stain, Vintage Modern, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Vintage Modern, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eVintage Modern \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/129-zar-vintage-modern-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331990838,"sku":"12912","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941129125.jpg?v=1791583716"},{"product_id":"zar-interior-oil-base-stain-beach-house-quart","title":"ZAR Interior Oil Base Stain, Beach House, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Beach House, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBeach House \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e13912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Causes skin irritation. Repeated exposure can damage organs. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/139-zar-beach-house-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332252982,"sku":"13912","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941139124.jpg?v=1791583718"},{"product_id":"zar-interior-oil-base-stain-silk-gray-quart","title":"ZAR Interior Oil Base Stain, Silk Gray, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Silk Gray, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSilk Gray \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e17012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/170-zar-silk-gray-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332285750,"sku":"17012","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941170127.jpg?v=1791583721"},{"product_id":"zar-interior-oil-base-stain-malibu-gray-quart","title":"ZAR Interior Oil Base Stain, Malibu Gray, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Malibu Gray, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMalibu Gray \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e17112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/171-zar-malibu-gray-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332318518,"sku":"17112","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941171124.jpg?v=1791583723"},{"product_id":"zar-interior-oil-base-stain-oiled-leather-quart","title":"ZAR Interior Oil Base Stain, Oiled Leather, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Oiled Leather, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eOiled Leather \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/503-zar-oiled-leather-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332384054,"sku":"50312","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941503123.jpg?v=1791583725"},{"product_id":"zar-interior-oil-base-stain-gray-cashmere-quart","title":"ZAR Interior Oil Base Stain, Gray Cashmere, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Gray Cashmere, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGray Cashmere \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/504-zar-gray-cashmere-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332449590,"sku":"50412","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941504120.jpg?v=1791583728"},{"product_id":"zar-interior-oil-base-stain-champagne-quart","title":"ZAR Interior Oil Base Stain, Champagne, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Champagne, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eChampagne \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/508-zar-champagne-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332482358,"sku":"50812","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941508128.jpg?v=1791583730"},{"product_id":"zar-interior-oil-base-stain-blue-moon-quart","title":"ZAR Interior Oil Base Stain, Blue Moon, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Blue Moon, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBlue Moon \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/509-zar-blue-moon-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332515126,"sku":"50912","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941506125.jpg?v=1791583733"},{"product_id":"zar-interior-oil-base-stain-moroccan-red-quart","title":"ZAR Interior Oil Base Stain, Moroccan Red, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Moroccan Red, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMoroccan Red \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e51712\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/517-zar-moroccan-red-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332810038,"sku":"51712","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941517120.jpg?v=1791583735"},{"product_id":"zar-interior-oil-base-stain-exotic-redwood-quart","title":"ZAR Interior Oil Base Stain, Exotic Redwood, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Exotic Redwood, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eExotic Redwood \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e51812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/518-zar-exotic-redwood-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332941110,"sku":"51812","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941518127.jpg?v=1791583738"},{"product_id":"zar-interior-omu-poly-clear-satin-gallon","title":"ZAR Interior OMU Poly, Clear Satin, Gallon","description":"\u003cp\u003e\u003cstrong\u003eZAR Interior OMU Poly, Clear Satin, Gallon\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNatural amber tone\u003c\/li\u003e\n\u003cli\u003eSelf-leveling\u003c\/li\u003e\n\u003cli\u003eExotic hardwood approved\u003c\/li\u003e\n\u003cli\u003eChild-safe when dry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eWood floors; Cabinets; Furniture; Woodwork; Wooden countertops\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater-based oil modified urethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e400-500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eOne week before maximum floor resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F air and surface; relative humidity below 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2; 3 for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle brush; Foam pad; T-bar for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e36213\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand new wood smooth and remove dust; Remove wax and grease from old finish; Remove lacquer or shellac fully.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Roller application; Finishes containing stearates or aluminum oxide; Paint.\u003c\/p\u003e\u003cp\u003eDanger: Toxic if inhaled; causes skin and serious eye irritation.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 400-500 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.zar.com\/products\/zar-interior\/zar-interior-oil-modified-urethane-poly-omu\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332973878,"sku":"36213","price":126.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941362133_1_1224.jpg?v=1791583740"},{"product_id":"zar-interior-oil-based-poly-clear-gloss-quart","title":"ZAR Interior Oil-Based Poly, Clear Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eZAR Interior Oil-Based Poly, Clear Gloss, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear finish\u003c\/li\u003e\n\u003cli\u003eSelf-leveling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood floors; Cabinets; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e500-600 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eFinal coat dry 4-6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2; 3 for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle brush; Lambswool applicator; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eApply straight from can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e32812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand new wood smooth and remove dust; Remove dirt, grease and wax from sound old finish; sand gloss; Remove poor finish, lacquer or shellac fully.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Wood fillers or finishes containing wax or stearates.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may be fatal if swallowed and enters airways; suspected of causing cancer; may cause genetic defects.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 500-600 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.zar.com\/products\/zar-interior\/zar-interior-oil-base-poly\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673333006646,"sku":"32812","price":39.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941328122_1_1124.jpg?v=1791583743"},{"product_id":"zar-interior-oil-based-poly-clear-satin-quart","title":"ZAR Interior Oil-Based Poly, Clear Satin, Quart","description":"\u003cp\u003e\u003cstrong\u003eZAR Interior Oil-Based Poly, Clear Satin, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear finish\u003c\/li\u003e\n\u003cli\u003eSelf-leveling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood floors; Cabinets; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e500-600 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eFinal coat dry 4-6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2; 3 for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle brush; Lambswool applicator; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eApply straight from can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e32912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand new wood smooth and remove dust; Remove dirt, grease and wax from sound old finish; sand gloss; Remove poor finish, lacquer or shellac fully.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Wood fillers or finishes containing wax or stearates.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may be fatal if swallowed and enters airways; suspected of causing cancer; may cause genetic defects.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 500-600 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.zar.com\/products\/zar-interior\/zar-interior-oil-base-poly\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673333072182,"sku":"32912","price":39.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941329129_1_1124.jpg?v=1791583746"},{"product_id":"zar-interior-oil-based-poly-clear-matte-quart","title":"ZAR Interior Oil-Based Poly, Clear Matte, Quart","description":"\u003cp\u003e\u003cstrong\u003eZAR Interior Oil-Based Poly, Clear Matte, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear finish\u003c\/li\u003e\n\u003cli\u003eSelf-leveling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood floors; Cabinets; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Matte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e500-600 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eFinal coat dry 4-6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2; 3 for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle brush; Lambswool applicator; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eApply straight from can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e33912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand new wood smooth and remove dust; Remove dirt, grease and wax from sound old finish; sand gloss; Remove poor finish, lacquer or shellac fully.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Wood fillers or finishes containing wax or stearates.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may be fatal if swallowed and enters airways; suspected of causing cancer; may cause genetic defects.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 500-600 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.zar.com\/products\/zar-interior\/zar-interior-oil-base-poly\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673333104950,"sku":"33912","price":39.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941339128_1_1124.jpg?v=1791583748"},{"product_id":"zar-interior-oil-based-poly-clear-matte-gallon","title":"ZAR Interior Oil-Based Poly, Clear Matte, Gallon","description":"\u003cp\u003e\u003cstrong\u003eZAR Interior Oil-Based Poly, Clear Matte, Gallon\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear finish\u003c\/li\u003e\n\u003cli\u003eSelf-leveling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood floors; Cabinets; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Matte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e500-600 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eFinal coat dry 4-6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2; 3 for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle brush; Lambswool applicator; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eApply straight from can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e33913\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand new wood smooth and remove dust; Remove dirt, grease and wax from sound old finish; sand gloss; Remove poor finish, lacquer or shellac fully.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Wood fillers or finishes containing wax or stearates.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may be fatal if swallowed and enters airways; suspected of causing cancer; may cause genetic defects.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 500-600 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.zar.com\/products\/zar-interior\/zar-interior-oil-base-poly\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673333170486,"sku":"33913","price":119.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941339135_1_1124.jpg?v=1791583751"},{"product_id":"zar-exterior-water-based-poly-hp-clear-satin-quart","title":"ZAR Exterior Water-Based Poly HP, Clear Satin, Quart","description":"\u003cp\u003e\u003cstrong\u003eZAR Exterior Water-Based Poly HP, Clear Satin, Quart\u003c\/strong\u003e is intended for exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear protective finish\u003c\/li\u003e\n\u003cli\u003eNon-yellowing\u003c\/li\u003e\n\u003cli\u003eUV protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExterior wood; Wood doors; Fiberglass doors; Wood-grained steel doors; Patio furniture; Above-waterline marine woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater-based polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eexterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e500-600 sq ft\/gallon at 1 mil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F air and surface; relative humidity below 50%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 exterior wooden surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle brush; Foam brush; Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e32712\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove dirt, wax and loose finish; Sand sound old finish lightly; Remove poor finish, lacquer or shellac fully.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Roller application; Paint; Decks or other foot traffic areas.\u003c\/p\u003e\u003cp\u003eDanger: Causes skin and serious eye irritation; may damage fertility or the unborn child.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 500-600 sq ft\/gallon at 1 mil. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.zar.com\/products\/zar-exterior\/zar-exterior-water-base-poly-high-performance\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673333694774,"sku":"32712","price":59.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941327125_1_1124.jpg?v=1791583753"},{"product_id":"zar-exterior-water-based-poly-hp-clear-satin-gallon","title":"ZAR Exterior Water-Based Poly HP, Clear Satin, Gallon","description":"\u003cp\u003e\u003cstrong\u003eZAR Exterior Water-Based Poly HP, Clear Satin, Gallon\u003c\/strong\u003e is intended for exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear protective finish\u003c\/li\u003e\n\u003cli\u003eNon-yellowing\u003c\/li\u003e\n\u003cli\u003eUV protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExterior wood; Wood doors; Fiberglass doors; Wood-grained steel doors; Patio furniture; Above-waterline marine woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater-based polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eexterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e500-600 sq ft\/gallon at 1 mil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F air and surface; relative humidity below 50%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 exterior wooden surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle brush; Foam brush; Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e32713\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove dirt, wax and loose finish; Sand sound old finish lightly; Remove poor finish, lacquer or shellac fully.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Roller application; Paint; Decks or other foot traffic areas.\u003c\/p\u003e\u003cp\u003eDanger: Causes skin and serious eye irritation; may damage fertility or the unborn child.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 500-600 sq ft\/gallon at 1 mil. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.zar.com\/products\/zar-exterior\/zar-exterior-water-base-poly-high-performance\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673333793078,"sku":"32713","price":191.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941327132_1_1124.jpg?v=1791583755"},{"product_id":"zar-exterior-oil-based-ultraviolet-poly-clear-gloss-quart","title":"ZAR Exterior Oil-Based Ultraviolet Poly, Clear Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eZAR Exterior Oil-Based Ultraviolet Poly, Clear Gloss, Quart\u003c\/strong\u003e is intended for exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUV absorbers and antioxidants\u003c\/li\u003e\n\u003cli\u003eClear protective finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExterior woodwork; Patio furniture; Wood doors; Fiberglass doors; Metal doors; Above-waterline marine woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eexterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e500-600 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F air and surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eAt least 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lambswool applicator; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e34012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand new wood 120-150 grit; remove dust; Remove grease, dirt, wax and gloss from sound old finishes; Remove poor finishes fully.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Decks or other foot traffic areas.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may be fatal if swallowed and enters airways; suspected of causing cancer; may cause genetic defects.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 500-600 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.zar.com\/products\/zar-exterior\/zar-exterior-oil-base-poly-ultraviolet\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673333825846,"sku":"34012","price":43.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941340124_1_1124.jpg?v=1791583758"},{"product_id":"zar-exterior-oil-based-ultraviolet-poly-clear-satin-quart","title":"ZAR Exterior Oil-Based Ultraviolet Poly, Clear Satin, Quart","description":"\u003cp\u003e\u003cstrong\u003eZAR Exterior Oil-Based Ultraviolet Poly, Clear Satin, Quart\u003c\/strong\u003e is intended for exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUV absorbers and antioxidants\u003c\/li\u003e\n\u003cli\u003eClear protective finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExterior woodwork; Patio furniture; Wood doors; Fiberglass doors; Metal doors; Above-waterline marine woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eexterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e500-600 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F air and surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eAt least 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lambswool applicator; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e34112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand new wood 120-150 grit; remove dust; Remove grease, dirt, wax and gloss from sound old finishes; Remove poor finishes fully.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Decks or other foot traffic areas.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may be fatal if swallowed and enters airways; suspected of causing cancer; may cause genetic defects.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 500-600 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.zar.com\/products\/zar-exterior\/zar-exterior-oil-base-poly-ultraviolet\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673333858614,"sku":"34112","price":43.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941341121_1_1124.jpg?v=1791583760"},{"product_id":"zar-exterior-oil-based-ultraviolet-poly-clear-satin-gallon","title":"ZAR Exterior Oil-Based Ultraviolet Poly, Clear Satin, Gallon","description":"\u003cp\u003e\u003cstrong\u003eZAR Exterior Oil-Based Ultraviolet Poly, Clear Satin, Gallon\u003c\/strong\u003e is intended for exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUV absorbers and antioxidants\u003c\/li\u003e\n\u003cli\u003eClear protective finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExterior woodwork; Patio furniture; Wood doors; Fiberglass doors; Metal doors; Above-waterline marine woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eexterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e500-600 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F air and surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eAt least 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lambswool applicator; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e34113\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand new wood 120-150 grit; remove dust; Remove grease, dirt, wax and gloss from sound old finishes; Remove poor finishes fully.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Decks or other foot traffic areas.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may be fatal if swallowed and enters airways; suspected of causing cancer; may cause genetic defects.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 500-600 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 2 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.zar.com\/products\/zar-exterior\/zar-exterior-oil-base-poly-ultraviolet\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673333891382,"sku":"34113","price":120.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941341138_1_1124.jpg?v=1791583762"}],"url":"https:\/\/projectweekenddiy.com\/collections\/zar.oembed","provider":"Project Weekend DIY","version":"1.0","type":"link"}