{"title":"ZAR Interior Oil Base Stain","description":"\u003cdiv class=\"collection-intro\"\u003e\n\u003cp\u003eZAR Interior Oil Base Stain is a full-bodied, translucent oil-based wiping stain. ZAR says it wipes on like furniture polish and gives rich, even color in one coat, with \"controlled penetration\" so it leaves no lap marks or streaks. That makes it a good pick for hard-to-stain woods like pine, birch, alder and maple, and it can also go over previously painted or varnished surfaces without stripping for a wood-grain or glazed look. We carry 18 colors in half pints and quarts: Aged Bourbon, Baby Grand, Beach House, Black Caviar, Blue Moon, Champagne, Dark Chocolate Truffle, Exotic Redwood, Golden Sunset, Gray Cashmere, Malibu Gray, Mink, Mocha, Moroccan Red, Oiled Leather, Premium Teak, Silk Gray and Vintage Modern.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUses per ZAR: unfinished and previously finished wood, painted or varnished surfaces, fiberglass, metal and composite surfaces, and glazing on cabinets, moldings and floors for a two-tone look.\u003c\/li\u003e\n\u003cli\u003eBare wood: fill holes, sand with 120 to 150 grit and remove the dust. Wipe or brush on with the grain and wipe off the excess the same way. Re-stain when dry for a darker tone.\u003c\/li\u003e\n\u003cli\u003ePainted or prefinished cabinets: don't sand paint; lightly sand prefinished cabinets with 320 grit. Apply with a lint-free cloth and dry-brush corners and lap marks.\u003c\/li\u003e\n\u003cli\u003eDry time is 3 hours on wood. Let non-wood surfaces and prefinished cabinets dry 48 hours before topcoating.\u003c\/li\u003e\n\u003cli\u003eCoverage is about 800 sq ft per quart at 1 mil, depending on the surface and how it's applied.\u003c\/li\u003e\n\u003cli\u003eStains and clear finishes won't stick to shellac or lacquer, so remove those first. Clean up with mineral spirits.\u003c\/li\u003e\n\u003cli\u003eOil-soaked rags can catch fire on their own. Put used rags in a sealed, water-filled metal container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eShop related: \u003ca href=\"\/collections\/zar\"\u003eall ZAR\u003c\/a\u003e, \u003ca href=\"\/collections\/old-masters-wiping-stain\"\u003eOld Masters Wiping Stain\u003c\/a\u003e, \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e, \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane\u003c\/a\u003e, and the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing cart\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eCan ZAR Interior Oil Base Stain go over paint?\u003c\/summary\u003e\u003cp\u003eYes. ZAR says to use it on fully dry painted surfaces without sanding. Apply with a lint-free cloth or brush, then wipe off or dry-brush the stain to get the glazed, two-tone look you want.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I mix two ZAR stain colors?\u003c\/summary\u003e\u003cp\u003eYes. ZAR says any two Interior Oil Base Stain colors can be blended 50\/50 for more color options. Test the blend on your surface first.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I lighten or darken the color?\u003c\/summary\u003e\u003cp\u003eFor a darker tone, apply a second coat once the first is dry. For a lighter tone, wipe the surface with a cloth dampened with mineral spirits before the stain dries.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat topcoat should I use?\u003c\/summary\u003e\u003cp\u003eZAR recommends its Water Base or Oil Base Poly for protection. ZAR notes that an oil-based poly over light oil stains can yellow in spots that don't get natural light, such as under rugs or low furniture.\u003c\/p\u003e\u003c\/details\u003e\n\u003cp\u003eFree shipping at $75. Free 30-day returns with a prepaid label on unopened cans. Sources: \u003ca href=\"https:\/\/www.zar.com\/products\/zar-interior\/zar-interior-oil-base-stain\" target=\"_blank\" rel=\"noopener\"\u003eZAR product page\u003c\/a\u003e and the ZAR Interior Oil Base Stain product data sheet (September 2025, version 01.01).\u003c\/p\u003e\n\u003c\/div\u003e\n","products":[{"product_id":"zar-interior-oil-base-stain-aged-bourbon-half-pint","title":"ZAR Interior Oil Base Stain, Aged Bourbon, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Aged Bourbon, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAged Bourbon \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11506\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/115-zar-aged-bourbon-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330450742,"sku":"459-867","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941115067.jpg?v=1791583655"},{"product_id":"zar-interior-oil-base-stain-mocha-half-pint","title":"ZAR Interior Oil Base Stain, Mocha, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Mocha, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMocha \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/119-zar-mocha-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330483510,"sku":"459-893","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941119065.jpg?v=1791583657"},{"product_id":"zar-interior-oil-base-stain-premium-teak-half-pint","title":"ZAR Interior Oil Base Stain, Premium Teak, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Premium Teak, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003ePremium Teak \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/120-zar-premium-teak-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330549046,"sku":"459-917","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941120061.jpg?v=1791583659"},{"product_id":"zar-interior-oil-base-stain-baby-grand-half-pint","title":"ZAR Interior Oil Base Stain, Baby Grand, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Baby Grand, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBaby Grand \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/121-zar-baby-grand-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330581814,"sku":"459-918","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941121068.jpg?v=1791583661"},{"product_id":"zar-interior-oil-base-stain-dark-chocolate-truffle-half-pint","title":"ZAR Interior Oil Base Stain, Dark Chocolate Truffle, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Dark Chocolate Truffle, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eDark Chocolate Truffle \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/123-zar-dark-chocolate-truffle-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330614582,"sku":"459-933","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941123062.jpg?v=1791583663"},{"product_id":"zar-interior-oil-base-stain-golden-sunset-half-pint","title":"ZAR Interior Oil Base Stain, Golden Sunset, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Golden Sunset, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGolden Sunset \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12706\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/127-zar-golden-sunset-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330647350,"sku":"459-974","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941127060.jpg?v=1791583665"},{"product_id":"zar-interior-oil-base-stain-mink-half-pint","title":"ZAR Interior Oil Base Stain, Mink, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Mink, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMink \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12806\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/128-zar-mink-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330680118,"sku":"459-982","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941128067.jpg?v=1791583668"},{"product_id":"zar-interior-oil-base-stain-beach-house-half-pint","title":"ZAR Interior Oil Base Stain, Beach House, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Beach House, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBeach House \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e13906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Causes skin irritation. Repeated exposure can damage organs. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/139-zar-beach-house-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330745654,"sku":"460-055","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941139063.jpg?v=1791583672"},{"product_id":"zar-interior-oil-base-stain-silk-gray-half-pint","title":"ZAR Interior Oil Base Stain, Silk Gray, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Silk Gray, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSilk Gray \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e17006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/170-zar-silk-gray-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330909494,"sku":"460-060","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941170066.jpg?v=1791583674"},{"product_id":"zar-interior-oil-base-stain-malibu-gray-half-pint","title":"ZAR Interior Oil Base Stain, Malibu Gray, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Malibu Gray, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMalibu Gray \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e17106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/171-zar-malibu-gray-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673330975030,"sku":"460-065","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941171063.jpg?v=1791583677"},{"product_id":"zar-interior-oil-base-stain-oiled-leather-half-pint","title":"ZAR Interior Oil Base Stain, Oiled Leather, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Oiled Leather, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eOiled Leather \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/503-zar-oiled-leather-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331007798,"sku":"460-070","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941503062.jpg?v=1791583680"},{"product_id":"zar-interior-oil-base-stain-gray-cashmere-half-pint","title":"ZAR Interior Oil Base Stain, Gray Cashmere, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Gray Cashmere, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGray Cashmere \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50406\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/504-zar-gray-cashmere-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331040566,"sku":"460-071","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941504069.jpg?v=1791583683"},{"product_id":"zar-interior-oil-base-stain-champagne-half-pint","title":"ZAR Interior Oil Base Stain, Champagne, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Champagne, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eChampagne \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50806\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/508-zar-champagne-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331106102,"sku":"460-072","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941508067.jpg?v=1791583685"},{"product_id":"zar-interior-oil-base-stain-blue-moon-half-pint","title":"ZAR Interior Oil Base Stain, Blue Moon, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Blue Moon, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBlue Moon \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/509-zar-blue-moon-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331171638,"sku":"460-073","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941509064.jpg?v=1791583688"},{"product_id":"zar-interior-oil-base-stain-moroccan-red-half-pint","title":"ZAR Interior Oil Base Stain, Moroccan Red, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Moroccan Red, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMoroccan Red \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e51706\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/517-zar-moroccan-red-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331204406,"sku":"460-074","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941517069.jpg?v=1791583690"},{"product_id":"zar-interior-oil-base-stain-exotic-redwood-half-pint","title":"ZAR Interior Oil Base Stain, Exotic Redwood, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Exotic Redwood, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eExotic Redwood \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e51806\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/518-zar-exotic-redwood-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331237174,"sku":"460-075","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941518066.jpg?v=1791583694"},{"product_id":"zar-interior-oil-base-stain-black-caviar-half-pint","title":"ZAR Interior Oil Base Stain, Black Caviar, Half Pint","description":"\u003cp\u003eZAR Interior Oil Base Stain in Black Caviar, Half Pint, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 200 sq ft from this half-pint can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBlack Caviar \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 200 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e13506\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/135-zar-black-caviar-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331269942,"sku":"460-076","price":10.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941135065.jpg?v=1791583696"},{"product_id":"zar-interior-oil-base-stain-aged-bourbon-quart","title":"ZAR Interior Oil Base Stain, Aged Bourbon, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Aged Bourbon, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAged Bourbon \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11512\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/115-zar-aged-bourbon-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331466550,"sku":"460-261","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941115128.jpg?v=1791583699"},{"product_id":"zar-interior-oil-base-stain-mocha-quart","title":"ZAR Interior Oil Base Stain, Mocha, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Mocha, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMocha \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/119-zar-mocha-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331728694,"sku":"460-303","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941119126.jpg?v=1791583702"},{"product_id":"zar-interior-oil-base-stain-baby-grand-quart","title":"ZAR Interior Oil Base Stain, Baby Grand, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Baby Grand, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBaby Grand \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/121-zar-baby-grand-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331761462,"sku":"460-312","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941121129.jpg?v=1791583705"},{"product_id":"zar-interior-oil-base-stain-dark-chocolate-truffle-quart","title":"ZAR Interior Oil Base Stain, Dark Chocolate Truffle, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Dark Chocolate Truffle, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eDark Chocolate Truffle \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/123-zar-dark-chocolate-truffle-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331892534,"sku":"460-337","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941123123.jpg?v=1791583708"},{"product_id":"zar-interior-oil-base-stain-golden-sunset-quart","title":"ZAR Interior Oil Base Stain, Golden Sunset, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Golden Sunset, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGolden Sunset \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12712\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/127-zar-golden-sunset-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331925302,"sku":"460-378","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941127121.jpg?v=1791583711"},{"product_id":"zar-interior-oil-base-stain-mink-quart","title":"ZAR Interior Oil Base Stain, Mink, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Mink, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMink \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/128-zar-mink-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331958070,"sku":"460-386","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941128128.jpg?v=1791583714"},{"product_id":"zar-interior-oil-base-stain-vintage-modern-quart","title":"ZAR Interior Oil Base Stain, Vintage Modern, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Vintage Modern, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eVintage Modern \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e12912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/129-zar-vintage-modern-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673331990838,"sku":"460-394","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941129125.jpg?v=1791583716"},{"product_id":"zar-interior-oil-base-stain-beach-house-quart","title":"ZAR Interior Oil Base Stain, Beach House, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Beach House, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBeach House \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e13912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Causes skin irritation. Repeated exposure can damage organs. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/139-zar-beach-house-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332252982,"sku":"460-451","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941139124.jpg?v=1791583718"},{"product_id":"zar-interior-oil-base-stain-silk-gray-quart","title":"ZAR Interior Oil Base Stain, Silk Gray, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Silk Gray, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSilk Gray \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e17012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/170-zar-silk-gray-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332285750,"sku":"460-545","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941170127.jpg?v=1791583721"},{"product_id":"zar-interior-oil-base-stain-malibu-gray-quart","title":"ZAR Interior Oil Base Stain, Malibu Gray, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Malibu Gray, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMalibu Gray \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e17112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Suspected cancer hazard. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/171-zar-malibu-gray-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332318518,"sku":"460-550","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941171124.jpg?v=1791583723"},{"product_id":"zar-interior-oil-base-stain-oiled-leather-quart","title":"ZAR Interior Oil Base Stain, Oiled Leather, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Oiled Leather, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eOiled Leather \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/503-zar-oiled-leather-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332384054,"sku":"460-560","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941503123.jpg?v=1791583725"},{"product_id":"zar-interior-oil-base-stain-gray-cashmere-quart","title":"ZAR Interior Oil Base Stain, Gray Cashmere, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Gray Cashmere, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGray Cashmere \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/504-zar-gray-cashmere-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332449590,"sku":"460-561","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941504120.jpg?v=1791583728"},{"product_id":"zar-interior-oil-base-stain-champagne-quart","title":"ZAR Interior Oil Base Stain, Champagne, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Champagne, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eChampagne \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/508-zar-champagne-stain-sds\"\u003ematching-color SDS dated 2020-12-08\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332482358,"sku":"460-562","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941508128.jpg?v=1791583730"},{"product_id":"zar-interior-oil-base-stain-blue-moon-quart","title":"ZAR Interior Oil Base Stain, Blue Moon, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Blue Moon, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBlue Moon \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/509-zar-blue-moon-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332515126,"sku":"460-563","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941506125.jpg?v=1791583733"},{"product_id":"zar-interior-oil-base-stain-moroccan-red-quart","title":"ZAR Interior Oil Base Stain, Moroccan Red, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Moroccan Red, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMoroccan Red \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e51712\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/517-zar-moroccan-red-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332810038,"sku":"460-564","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941517120.jpg?v=1791583735"},{"product_id":"zar-interior-oil-base-stain-exotic-redwood-quart","title":"ZAR Interior Oil Base Stain, Exotic Redwood, Quart","description":"\u003cp\u003eZAR Interior Oil Base Stain in Exotic Redwood, Quart, adds translucent oil-based color to interior wood and suitable nonwood surfaces. Manufacturer coverage at a 1-mil film is about 800 sq ft from this quart can; application, texture and porosity affect yield. Test on your actual surface before committing to a color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eControlled penetration helps produce even color.\u003c\/li\u003e\n\u003cli\u003eOne stain coat can color a prepared surface.\u003c\/li\u003e\n\u003cli\u003eA second dry-stage coat can deepen the tone.\u003c\/li\u003e\n\u003cli\u003eManufacturer directions include decorative glazing and nonwood applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior unfinished wood, fully dry painted surfaces, prefinished cabinets and manufacturer-directed fiberglass, metal or composite surfaces. Shellac and lacquer must be removed completely. Exterior use is limited to vertical surfaces protected with ZAR Exterior Poly; this is not a clear protective finish.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eExotic Redwood \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior; conditional exterior vertical use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 800 sq ft per can at 1 mil; actual yield varies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying \/ recoat\u003c\/th\u003e\n\u003ctd\u003eGeneral wood: 3 hours; prefinished cabinets and nonwood: 48 hours. Optional second stain coat when dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSeparate times not published; follow the protective topcoat’s cure instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ tools\u003c\/th\u003e\n\u003ctd\u003eOne stain coat; optional second \/ lint-free cloth, foam or natural-bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eNo can-dilution recipe published \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eNo numerical value in reviewed manufacturer PDS and matching SDS; low-VOC eligibility requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e51812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove dirt, wax and grease. Repair raw wood, sand 120–150 grit and remove dust. Let a mineral-spirits damp wipe dry. Do not sand painted surfaces; let their paint dry completely. Lightly sand prefinished cabinets with 320 grit. Do not sand bare embossed nonwood.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply evenly with a lint-free cloth or brush and wipe excess with the grain. On paint, wipe or dry-brush for the desired glaze. On cabinets, cloth-apply with grain and dry-brush corners or lap marks.\u003c\/li\u003e\n\u003cli\u003eFor embossed nonwood, work stain into the grain with a circular cloth motion, then wipe with the grain and feather with a dry soft brush. Dry at least 48 hours, as for prefinished cabinets. Cool or humid conditions need longer.\u003c\/li\u003e\n\u003cli\u003eApply compatible ZAR Water Base or Oil Base Poly for protection, following its label. Oil-based Poly over light stains can yellow without natural-light exposure. Clean tools with mineral spirits.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; aspiration can be fatal. Harmful if inhaled; may cause skin allergy and is suspected of harming the unborn child. Skin contact may be harmful. Toxic to aquatic life with lasting effects; avoid release. Read the \u003ca href=\"https:\/\/www.zar.com\/resources\/view\/518-zar-exotic-redwood-stain-sds\"\u003ematching-color SDS dated 2020-12-07\u003c\/a\u003e and current label. Ventilate; avoid breathing vapors and contact; wear specified gloves and eye\/face protection. Keep away from ignition sources. Immediately place soaked rags, steel wool and waste in a sealed, water-filled metal container. Disturbing old paint may release toxic lead dust; follow the manufacturer’s lead precautions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I lighten the result?\u003c\/strong\u003e Before stain dries, wipe with a mineral-spirits damp cloth; this is not a can-dilution recipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I blend colors?\u003c\/strong\u003e Two colors in this ZAR line can be mixed 50:50; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the photo match my project?\u003c\/strong\u003e Wood, preparation and application affect color; test a sample on your surface.\u003c\/p\u003e","brand":"ZAR","offers":[{"title":"Default Title","offer_id":67673332941110,"sku":"460-565","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/079941518127.jpg?v=1791583738"}],"url":"https:\/\/projectweekenddiy.com\/collections\/zar-interior-oil-base-stain.oembed?page=2","provider":"Project Weekend DIY","version":"1.0","type":"link"}