{"title":"Wood Finishing Oils and Paste Wax: Danish, Tung, Teak and Hard Wax Oil","description":"\u003cdiv class=\"collection-intro\"\u003e\n\u003cp\u003eHand-rubbed oil finishes, paste wax and wood care for furniture, cabinets, trim, turnings and cutting boards: Watco Danish Oil and Teak Oil, Minwax and Old Masters Tung Oil, General Finishes Hard Wax Oil, wood bowl and turning finishes, Howard cutting board oil and butcher block conditioner, paste waxes from Minwax, Old Masters, Howard and Watco, and Howard Restor-A-Finish for faded finishes. Every number below comes from the maker's data sheet or product page.\u003c\/p\u003e\n\u003cp\u003eQuick picks: for a stain and finish in one wipe-on step on bare interior wood, use \u003ca href=\"\/products\/watco-danish-oil-natural-pint\"\u003eWatco Danish Oil\u003c\/a\u003e (Natural or a tinted color). For a clear hand-rubbed luster that builds gloss with each coat, use \u003ca href=\"\/products\/minwax-tung-oil-finish-clear-light-amber-pint\"\u003eMinwax Tung Oil Finish\u003c\/a\u003e or \u003ca href=\"\/products\/old-masters-tung-oil-pint\"\u003eOld Masters Tung Oil\u003c\/a\u003e. For a one-coat oil and wax look with urethane solids, use \u003ca href=\"\/products\/general-finishes-hard-wax-oil-clear-pint\"\u003eGeneral Finishes Hard Wax Oil\u003c\/a\u003e. For cutting boards and butcher block, use \u003ca href=\"\/products\/howard-cutting-board-oil-light-tan-12-oz\"\u003eHoward Cutting Board Oil\u003c\/a\u003e and \u003ca href=\"\/products\/howard-butcher-block-conditioner-light-tan-12-oz\"\u003eButcher Block Conditioner\u003c\/a\u003e. To bring back a dull finish without stripping it, use \u003ca href=\"\/products\/howard-restor-a-finish-wood-finish-restorer-neutral-pint\"\u003eHoward Restor-A-Finish\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCompare wood finishing oils and waxes\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eBest for (maker)\u003c\/th\u003e\n\u003cth\u003eHow it goes on and dries (maker)\u003c\/th\u003e\n\u003cth\u003eCoverage and notes (maker)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatco Danish Oil (\u003ca href=\"\/products\/watco-danish-oil-natural-pint\"\u003eNatural pint\u003c\/a\u003e, \u003ca href=\"\/products\/watco-danish-oil-dark-walnut-quart\"\u003eDark Walnut quart\u003c\/a\u003e, \u003ca href=\"\/collections\/watco\"\u003eall colors and sizes\u003c\/a\u003e)\u003c\/td\u003e\n\u003ctd\u003eInterior bare wood furniture, trim and cabinets with a hand-rubbed look; the tinted colors also stain\u003c\/td\u003e\n\u003ctd\u003eBrush or wipe on, let it penetrate 15 minutes, add more if needed, then wipe completely dry; wait at least 72 hours before a polyurethane topcoat\u003c\/td\u003e\n\u003ctd\u003ePenetrating oil and varnish blend that hardens in the wood. Apply at 60 to 90 F. Not for floors or exterior (Watco WAT-02)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatco Danish Oil 275 VOC, Natural (\u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-quart\"\u003equart\u003c\/a\u003e, \u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-gallon\"\u003egallon\u003c\/a\u003e)\u003c\/td\u003e\n\u003ctd\u003eSame uses where a lower VOC version is wanted\u003c\/td\u003e\n\u003ctd\u003ePenetrate 30 minutes, reapply and wait 15 minutes, then wipe; light use in 8 to 10 hours\u003c\/td\u003e\n\u003ctd\u003eAbout 550 to 600 sq ft per gallon; VOC under 275 g\/L (Watco WAT-15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatco Teak Oil Finish (\u003ca href=\"\/products\/watco-teak-oil-finish-quart\"\u003equart\u003c\/a\u003e, \u003ca href=\"\/products\/watco-teak-oil-finish-gallon\"\u003egallon\u003c\/a\u003e)\u003c\/td\u003e\n\u003ctd\u003eTeak, rosewood and mahogany; indoor and outdoor furniture and boat wood above the water line\u003c\/td\u003e\n\u003ctd\u003eFlood on, wait at least 30 minutes before recoating, add coats every 15 minutes, wipe off the excess; light use after 8 to 10 hours\u003c\/td\u003e\n\u003ctd\u003eUV and moisture resistant penetrating finish. Apply at 55 to 90 F (Watco WAT-11)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinwax Tung Oil Finish, Clear Light Amber (\u003ca href=\"\/products\/minwax-tung-oil-finish-clear-light-amber-pint\"\u003epint\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-tung-oil-finish-clear-light-amber-quart\"\u003equart\u003c\/a\u003e)\u003c\/td\u003e\n\u003ctd\u003eFine interior wood and furniture, including newly refinished or stained wood\u003c\/td\u003e\n\u003ctd\u003eWipe or brush on a generous coat, buff after 5 to 10 minutes, wait 24 hours for the second coat; two coats recommended, more coats add gloss\u003c\/td\u003e\n\u003ctd\u003eAbout 125 to 150 sq ft per quart. Not recommended for floors (Minwax directions rev 4\/30\/15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOld Masters Tung Oil (\u003ca href=\"\/products\/old-masters-tung-oil-pint\"\u003epint\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-tung-oil-quart\"\u003equart\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-tung-oil-gallon\"\u003egallon\u003c\/a\u003e)\u003c\/td\u003e\n\u003ctd\u003eHand-rubbed oil finish on interior bare wood, antiques and fine furniture\u003c\/td\u003e\n\u003ctd\u003eDries in 8 to 12 hours; water and alcohol resistant, will not crack, chip or peel\u003c\/td\u003e\n\u003ctd\u003eAbout 300 to 400 sq ft per gallon; VOC 8 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/old-masters-tung-oil-varnish-quart\"\u003eOld Masters Tung Oil Varnish, quart\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eInterior furniture, cabinets, tables and bar tops\u003c\/td\u003e\n\u003ctd\u003eTung oil blended with varnish for a tougher, non-oily finish; dries in 4 to 6 hours\u003c\/td\u003e\n\u003ctd\u003eAbout 678 sq ft per gallon; VOC 450 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneral Finishes Hard Wax Oil, Clear (\u003ca href=\"\/products\/general-finishes-hard-wax-oil-clear-half-pint\"\u003ehalf pint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-hard-wax-oil-clear-pint\"\u003epint\u003c\/a\u003e) and \u003ca href=\"\/products\/general-finishes-hard-wax-oil-hardener-clear-4-oz\"\u003eHardener, 4 oz\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003eInterior raw wood furniture, millwork and woodworking projects; a maintenance finish you reapply when worn\u003c\/td\u003e\n\u003ctd\u003eApply a thin coat with a white non-woven pad or plastic spreader and wipe the excess; second coat (if needed) and use after 24 hours. Optional Hardener mixes in at 10% by volume\u003c\/td\u003e\n\u003ctd\u003e75 to 125 sq ft per half pint, 150 to 250 sq ft per pint; low luster similar to wax; VOC under 50 g\/L (GF TDS v7, 2024-01)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneral Finishes Oil-Based Wood Bowl Finish, Gloss (\u003ca href=\"\/products\/general-finishes-oil-based-wood-bowl-finish-gloss-pint\"\u003epint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-oil-based-wood-bowl-finish-gloss-quart\"\u003equart\u003c\/a\u003e)\u003c\/td\u003e\n\u003ctd\u003eDecorative wood bowls and turnings, raw or stained\u003c\/td\u003e\n\u003ctd\u003e3 coats by cloth, brush or pad; recoat after 24+ hours; full cure 30 days\u003c\/td\u003e\n\u003ctd\u003e50 to 60 sq ft per pint; dries amber. Not for countertops that are actively chopped or cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/general-finishes-wood-turners-finish-clear-8-oz\"\u003eGeneral Finishes Wood Turner's Finish, 8 oz\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLathe-turned wood and bowls\u003c\/td\u003e\n\u003ctd\u003eRecoat in 10 minutes on the lathe or 30+ minutes off it; 3 or more coats; full cure 21 days\u003c\/td\u003e\n\u003ctd\u003eAbout 38 sq ft per bottle; oil-modified water-based urethane with a slight amber tone; VOC under 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/howard-cutting-board-oil-light-tan-12-oz\"\u003eHoward Cutting Board Oil, 12 oz\u003c\/a\u003e and \u003ca href=\"\/products\/howard-butcher-block-conditioner-light-tan-12-oz\"\u003eButcher Block Conditioner, 12 oz\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003eCutting boards, butcher blocks, bowls, utensils and wood countertops\u003c\/td\u003e\n\u003ctd\u003eCutting Board Oil for the first oiling and dry wood; Butcher Block Conditioner for ongoing care with a satin wax finish\u003c\/td\u003e\n\u003ctd\u003eCutting Board Oil is 100% pure USP food-grade mineral oil that meets FDA food-contact rules; the conditioner adds beeswax and carnauba\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePaste wax: \u003ca href=\"\/products\/minwax-paste-finishing-wax-natural-1-lb\"\u003eMinwax Natural\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-paste-finishing-wax-dark-1-lb\"\u003eDark\u003c\/a\u003e 1 lb, \u003ca href=\"\/products\/old-masters-paste-wax-clear-1-lb\"\u003eOld Masters 1 lb\u003c\/a\u003e, \u003ca href=\"\/products\/howard-citrus-shield-premium-paste-wax-natural-11-oz\"\u003eHoward Citrus-Shield 11 oz\u003c\/a\u003e, \u003ca href=\"\/products\/watco-satin-wax-natural-quart\"\u003eWatco Satin Wax quart\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003eLuster and light protection on finished or stained interior wood that does not need a polyurethane coat\u003c\/td\u003e\n\u003ctd\u003eMinwax: wait 24 hours after staining, buff after 10 to 15 minutes. Old Masters: dries 15 to 30 minutes, then buff. Howard: buff after 3 to 5 minutes. Watco: wipe off after 10 minutes and polish\u003c\/td\u003e\n\u003ctd\u003eMinwax about 500 sq ft per lb. Old Masters is carnauba wax. Howard blends carnauba, beeswax and orange oil. Watco says not to put polyurethane over wax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHoward Restor-A-Finish (\u003ca href=\"\/products\/howard-restor-a-finish-wood-finish-restorer-neutral-pint\"\u003eNeutral\u003c\/a\u003e and 7 colors, pints), \u003ca href=\"\/products\/howard-feed-n-wax-wood-polish-and-conditioner-yellow-pint\"\u003eFeed-N-Wax pint\u003c\/a\u003e, \u003ca href=\"\/products\/watco-rejuvenating-oil-pint\"\u003eWatco Rejuvenating Oil pint\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003eFaded, scratched or dry finished wood that you want to revive without stripping\u003c\/td\u003e\n\u003ctd\u003eRestor-A-Finish: wipe on, wipe off, wait at least 30 minutes, then Feed-N-Wax. Rejuvenating Oil: wipe on, wipe dry after 10 minutes, wait 72 hours before Satin Wax\u003c\/td\u003e\n\u003ctd\u003eRestor-A-Finish removes white heat rings, water marks and sun fade from lacquer, shellac, varnish and polyurethane finishes. Feed-N-Wax is not for food-prep surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWood oil and wax FAQ\u003c\/h2\u003e\n\u003ch3\u003eDanish oil, tung oil or teak oil?\u003c\/h3\u003e\n\u003cp\u003eWatco Danish Oil is a penetrating oil and varnish blend for interior bare wood, and its tinted colors stain and finish in one step. Tung oil finishes from Minwax and Old Masters give a clear hand-rubbed luster that you build coat by coat. Watco Teak Oil is made for dense woods such as teak, rosewood and mahogany, including outdoor furniture and boat wood above the water line. If you want a tougher, non-oily tung finish for tabletops and bar tops, Old Masters Tung Oil Varnish blends tung oil with varnish.\u003c\/p\u003e\n\u003ch3\u003eCan I put polyurethane over Danish oil or wax?\u003c\/h3\u003e\n\u003cp\u003eOver Watco Danish Oil, yes, after at least 72 hours of dry time, and wipe off all excess oil when you apply it. Over wax, no. Watco says not to put polyurethane or other surface finishes over wax; remove the wax completely and let the wood dry 72 hours first. For clear coats, see \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat is safe for cutting boards and butcher block?\u003c\/h3\u003e\n\u003cp\u003eHoward Cutting Board Oil is 100% pure USP food-grade mineral oil and meets FDA food-contact rules, and Butcher Block Conditioner adds beeswax and carnauba to food-grade mineral oil for regular upkeep. Howard says Feed-N-Wax is not for food-prep surfaces, and General Finishes says its Wood Bowl Finish is not for countertops that are actively chopped or cut.\u003c\/p\u003e\n\u003ch3\u003eHow do I use Hard Wax Oil?\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes says to sand raw wood, apply a thin coat with a white non-woven pad or plastic spreader, and wipe the excess. General Finishes calls for one coat, plus a second after 24 hours if needed. The surface is ready for use 24 hours after the final coat. Mix in the optional Hardener at 10% by volume for more durability, and use the mixed finish within 4 to 6 hours. Hard Wax Oil is for interior raw wood only, not over an existing sealed finish.\u003c\/p\u003e\n\u003ch3\u003eHow do I apply paste wax?\u003c\/h3\u003e\n\u003cp\u003eWipe a thin, even coat onto clean, dry finished or stained wood, let it dry for the time on the can, and buff with a clean cloth. Minwax says to wait 24 hours after staining and to buff after 10 to 15 minutes, with about 500 sq ft per pound. Old Masters Paste Wax dries 15 to 30 minutes before buffing, and Howard Citrus-Shield buffs after 3 to 5 minutes. Minwax notes a second coat gives a deeper luster.\u003c\/p\u003e\n\u003ch3\u003eCan I fix a faded or water-marked finish without stripping it?\u003c\/h3\u003e\n\u003cp\u003eOften, yes. Howard Restor-A-Finish penetrates the existing finish to blend out minor scratches and remove white heat rings, water marks and sun fade. Pick the color closest to your finish (Neutral works on all wood tones), wipe it dry, wait at least 30 minutes, and protect it with Feed-N-Wax. For wood that already has an oil finish, Watco Rejuvenating Oil refreshes it.\u003c\/p\u003e\n\u003ch3\u003eCan I use these oils on floors?\u003c\/h3\u003e\n\u003cp\u003eNot these. Watco says Danish Oil is not for floors or exterior surfaces, and Minwax says Tung Oil Finish is not recommended for floors. For interior floors, look at the floor-rated finishes in \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow should I handle oily rags?\u003c\/h3\u003e\n\u003cp\u003eRags, pads and steel wool soaked with oil finishes may catch fire on their own if they are improperly discarded. Minwax and Old Masters say to put them in a sealed, water-filled metal container and dispose of them by local fire rules.\u003c\/p\u003e\n\u003cp\u003eShop related: \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e, \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e, \u003ca href=\"\/collections\/howard\"\u003eHoward wood care\u003c\/a\u003e, \u003ca href=\"\/collections\/old-masters\"\u003eOld Masters\u003c\/a\u003e, \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e, \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e, \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e, \u003ca href=\"\/collections\/shellac\"\u003eshellac\u003c\/a\u003e, and the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing cart\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n","products":[{"product_id":"watco-danish-oil-275-voc-natural-quart","title":"Watco Danish Oil 275 VOC, Natural, Quart","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA unique blend of penetrating oil and varnish\u003c\/li\u003e\n\u003cli\u003ePenetrates deep, stains, seals, and protects in one easy step\u003c\/li\u003e\n\u003cli\u003eSuperior protection finish will not crack, chip or peel\u003c\/li\u003e\n\u003cli\u003eEasy wipe on application\u003c\/li\u003e\n\u003cli\u003eRich, even color wipes on easily, leaves no brush marks\u003c\/li\u003e\n\u003cli\u003eLow VOC formula\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e242218\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/rustoleumsupport.zendesk.com\/hc\/en-us\/article_attachments\/43083323597709\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67667427164470,"sku":"242218","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/020066167516.jpg?v=1791538659"},{"product_id":"watco-danish-oil-275-voc-natural-gallon","title":"Watco Danish Oil 275 VOC, Natural, Gallon","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA unique blend of penetrating oil and varnish\u003c\/li\u003e\n\u003cli\u003ePenetrates deep, stains, seals, and protects in one easy step\u003c\/li\u003e\n\u003cli\u003eSuperior protection finish will not crack, chip or peel\u003c\/li\u003e\n\u003cli\u003eEasy wipe on application\u003c\/li\u003e\n\u003cli\u003eRich, even color wipes on easily, leaves no brush marks\u003c\/li\u003e\n\u003cli\u003eLow VOC formula\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e242217\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/rustoleumsupport.zendesk.com\/hc\/en-us\/article_attachments\/43083323597709\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67667432341814,"sku":"242217","price":95.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/020066167509.jpg?v=1791538682"},{"product_id":"watco-teak-oil-finish-quart","title":"Watco Teak Oil Finish, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Teak Oil Finish, Quart\u003c\/strong\u003e is intended for interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUV and moisture resistance\u003c\/li\u003e\n\u003cli\u003ePenetrating oil finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eDense wood; Teak; Rosewood; Mahogany; Furniture; Marine wood above waterline\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Teak Oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-phenolic rosin ester in mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e150-200 sq ft\/quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTack free after 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e30 minutes; additional coats every 15 minutes after first recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAbove 55°F and below 90°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free cloth; Roller; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e67141\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean, dry and remove old finish; Sand 150-220 grit; Remove dust.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Below-waterline marine wood.\u003c\/p\u003e\u003cp\u003eDanger: Representative quart SDS: flammable liquid and vapor; skin sensitizer; serious eye irritant; may cause genetic defects, cancer, reproductive harm and organ damage with repeated exposure.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 150-200 sq ft\/quart. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 30 minutes; additional coats every 15 minutes after first recoat. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/teak-oil-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668853326134,"sku":"67141","price":28.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748067143.jpg?v=1791546079"},{"product_id":"watco-teak-oil-finish-gallon","title":"Watco Teak Oil Finish, Gallon","description":"\u003cp\u003e\u003cstrong\u003eWatco Teak Oil Finish, Gallon\u003c\/strong\u003e is intended for interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUV and moisture resistance\u003c\/li\u003e\n\u003cli\u003ePenetrating oil finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eDense wood; Teak; Rosewood; Mahogany; Furniture; Marine wood above waterline\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Teak Oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-phenolic rosin ester in mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e150-200 sq ft\/quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTack free after 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e30 minutes; additional coats every 15 minutes after first recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAbove 55°F and below 90°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free cloth; Roller; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e67131\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean, dry and remove old finish; Sand 150-220 grit; Remove dust.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Below-waterline marine wood.\u003c\/p\u003e\u003cp\u003eDanger: Representative quart SDS: flammable liquid and vapor; skin sensitizer; serious eye irritant; may cause genetic defects, cancer, reproductive harm and organ damage with repeated exposure.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 150-200 sq ft\/quart. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 30 minutes; additional coats every 15 minutes after first recoat. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/teak-oil-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668875706678,"sku":"67131","price":84.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748067136.jpg?v=1791546100"},{"product_id":"watco-satin-wax-natural-quart","title":"Watco Satin Wax, Natural, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Satin Wax, Natural, Quart\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSoft satin luster\u003c\/li\u003e\n\u003cli\u003eWater resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare wood; Oil-finished wood; Furniture; Trim; Paneling\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural Stain Wax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ehydrocarbon wax in light petroleum distillate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; relative humidity below 85%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eClean cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e722-744\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e67041\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Allow prior oil or stain to dry 72 hours; Sand bare wood 150-220 grit; Remove dust.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior surfaces; Polyurethane directly over wax.\u003c\/p\u003e\u003cp\u003eNone assigned: SDS assigns no signal word.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/DigitalEncyclopedia\/Documents\/RustoleumUSA\/TDS\/English\/CBG\/Watco\/WAT-03_Watco_Satin_Wax.ashx\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668892320054,"sku":"67041","price":19.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748067044.jpg?v=1791546126"},{"product_id":"watco-rejuvenating-oil-pint","title":"Watco Rejuvenating Oil, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Rejuvenating Oil, Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves surface grime\u003c\/li\u003e\n\u003cli\u003eReplenishes oil-finished wood\u003c\/li\u003e\n\u003cli\u003eLemon scent\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eOil-finished wood furniture; Trim; Paneling\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eRejuvenating Oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eurethane-modified linseed oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e50-75 sq ft\/quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; relative humidity below 85%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eLint-free cloth; Fine steel wool for minor stains and scratches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e458\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eWatco Satin Wax after 72 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e66051\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand with wood grain if needed, from 120 through 220 grit; Remove sanding dust and dirt.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior surfaces.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 50-75 sq ft\/quart. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/rejuvenating-oil\/sku\/66051h\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668906115382,"sku":"66051","price":15.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748066054.jpg?v=1791546146"},{"product_id":"watco-danish-oil-natural-pint","title":"Watco Danish Oil, Natural, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Natural, Pint\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65751\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671306305846,"sku":"65751","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065750.jpg?v=1791550172"},{"product_id":"watco-danish-oil-light-walnut-pint","title":"Watco Danish Oil, Light Walnut, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Light Walnut, Pint\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eLight Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65551\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671307026742,"sku":"65551","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065552.jpg?v=1791904181"},{"product_id":"watco-danish-oil-medium-walnut-pint","title":"Watco Danish Oil, Medium Walnut, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Medium Walnut, Pint\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eMedium Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65951\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671307518262,"sku":"65951","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065958.jpg?v=1791550263"},{"product_id":"watco-danish-oil-dark-walnut-pint","title":"Watco Danish Oil, Dark Walnut, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Dark Walnut, Pint\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eDark Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65851\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671307747638,"sku":"65851","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065859.jpg?v=1791550265"},{"product_id":"watco-danish-oil-black-walnut-pint","title":"Watco Danish Oil, Black Walnut, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Black Walnut, Pint\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eBlack Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65351\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671308402998,"sku":"65351","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065354.jpg?v=1791550304"},{"product_id":"watco-danish-oil-cherry-pint","title":"Watco Danish Oil, Cherry, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Cherry, Pint\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eCherry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65251\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671308435766,"sku":"65251","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065255.jpg?v=1791550305"},{"product_id":"watco-danish-oil-light-walnut-quart","title":"Watco Danish Oil, Light Walnut, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Light Walnut, Quart\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eLight Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65541\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671309025590,"sku":"65541","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065545.jpg?v=1791550349"},{"product_id":"watco-danish-oil-medium-walnut-quart","title":"Watco Danish Oil, Medium Walnut, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Medium Walnut, Quart\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eMedium Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65941\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671422861622,"sku":"65941","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065941.jpg?v=1791554327"},{"product_id":"watco-danish-oil-dark-walnut-quart","title":"Watco Danish Oil, Dark Walnut, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Dark Walnut, Quart\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eDark Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65841\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671422894390,"sku":"65841","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065842.jpg?v=1791554328"},{"product_id":"watco-danish-oil-black-walnut-quart","title":"Watco Danish Oil, Black Walnut, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Black Walnut, Quart\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eBlack Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65341\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671422927158,"sku":"65341","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065347.jpg?v=1791554391"},{"product_id":"watco-danish-oil-cherry-quart","title":"Watco Danish Oil, Cherry, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Cherry, Quart\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eCherry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65241\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671422959926,"sku":"65241","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065248.jpg?v=1792076219"},{"product_id":"watco-danish-oil-golden-oak-quart","title":"Watco Danish Oil, Golden Oak, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Golden Oak, Quart\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eGolden Oak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65141\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671425515830,"sku":"65141","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065149.jpg?v=1791554506"},{"product_id":"watco-danish-oil-medium-walnut-gallon","title":"Watco Danish Oil, Medium Walnut, Gallon","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Medium Walnut, Gallon\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eMedium Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65931\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671425745206,"sku":"65931","price":59.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065934.jpg?v=1791554545"},{"product_id":"watco-danish-oil-dark-walnut-gallon","title":"Watco Danish Oil, Dark Walnut, Gallon","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Dark Walnut, Gallon\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eDark Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend; mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65831\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors; Exterior use.\u003c\/p\u003e\u003cp\u003eDanger: Medium Walnut pint SDS: flammable; skin sensitization; harmful if inhaled; may cause genetic defects or cancer; may damage fertility or unborn child; organ damage from prolonged or repeated exposure. Oil-soaked materials can ignite spontaneously.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 72 hours at 70-80°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671425777974,"sku":"65831","price":59.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065835.jpg?v=1791554546"},{"product_id":"general-finishes-hard-wax-oil-clear-half-pint","title":"General Finishes Hard Wax Oil, Clear, Half Pint","description":"\u003cp\u003eGeneral Finishes Hard Wax Oil is a low-luster oil and wax finish with urethane solids for interior raw wood furniture, millwork and woodworking projects. Apply a thin coat with a white non-woven pad or plastic spreader, let it sit 5 minutes, then wipe off the excess. GF lists 75 to 125 sq ft per half pint and 150 to 250 sq ft per pint, VOC under 50 g\/L, and a 24 hour wait before any second coat. For a faster cure, mix in the optional \u003ca href=\"\/products\/general-finishes-hard-wax-oil-hardener-clear-4-oz\"\u003eHard Wax Oil Hardener\u003c\/a\u003e at 10% by volume. Compare oil finishes in \u003ca href=\"\/collections\/wood-oil-finishes-paste-wax\"\u003ewood finishing oils and paste wax\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOil and wax with urethane solids\u003c\/li\u003e\n\u003cli\u003eMaintenance finish\u003c\/li\u003e\n\u003cli\u003eReapply when worn\u003c\/li\u003e\n\u003cli\u003eLow luster\u003c\/li\u003e\n\u003cli\u003eOptional hardener shortens dry time\u003c\/li\u003e\n\u003cli\u003eMade with renewable resources\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior raw wood furniture; Millwork; Woodworking projects\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and wax blend with urethane solids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e75-125 sq ft\/half-pint; 150-250 sq ft\/pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eImmediately per TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e24 hours if second coat is needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal 70°F and 50% humidity, out of direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1; second if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eWhite non-woven pad; Plastic spreader; Variable-speed buffer or sander on large surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eMineral spirits if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 50 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOptional GF Hard Wax Oil Hardener at 10% by volume; mixed product hardens after 4-6 hours; do not use GF NCO catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB807-UL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003ePrep (maker): Sand 120 then 220 grit; Remove dust; Wipe with mineral spirits and allow to dry.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eSand and clean raw wood\u003c\/li\u003e\n\u003cli\u003eStir thoroughly; mix optional 10% hardener\u003c\/li\u003e\n\u003cli\u003eApply thin coat with white non-woven pad or spreader\u003c\/li\u003e\n\u003cli\u003eRest 5 minutes, then wipe excess\u003c\/li\u003e\n\u003cli\u003eWait 24 hours before any second coat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Existing sealed finishes; Exterior use; Spray application.\u003c\/p\u003e\u003cp\u003e2023 Hard Wax Oil SDS: not classified as hazardous.\u003c\/p\u003e\u003cp\u003eProduct-soaked applicators may spontaneously ignite if improperly discarded.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eMaker coverage: 75-125 sq ft\/half-pint; 150-250 sq ft\/pint. Multiply by the number of coats you plan.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eMaker recoat guidance: 24 hours if second coat is needed, at the temperature and humidity on the label.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/maintenance-polishes-and-waxes\/hard-wax-oil-hardener\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673248071990,"sku":"B807-UL-HP","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121847.jpg?v=1791581909"},{"product_id":"general-finishes-hard-wax-oil-clear-pint","title":"General Finishes Hard Wax Oil, Clear, Pint","description":"\u003cp\u003eGeneral Finishes Hard Wax Oil is a low-luster oil and wax finish with urethane solids for interior raw wood furniture, millwork and woodworking projects. Apply a thin coat with a white non-woven pad or plastic spreader, let it sit 5 minutes, then wipe off the excess. GF lists 75 to 125 sq ft per half pint and 150 to 250 sq ft per pint, VOC under 50 g\/L, and a 24 hour wait before any second coat. For a faster cure, mix in the optional \u003ca href=\"\/products\/general-finishes-hard-wax-oil-hardener-clear-4-oz\"\u003eHard Wax Oil Hardener\u003c\/a\u003e at 10% by volume. Compare oil finishes in \u003ca href=\"\/collections\/wood-oil-finishes-paste-wax\"\u003ewood finishing oils and paste wax\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOil and wax with urethane solids\u003c\/li\u003e\n\u003cli\u003eMaintenance finish\u003c\/li\u003e\n\u003cli\u003eReapply when worn\u003c\/li\u003e\n\u003cli\u003eLow luster\u003c\/li\u003e\n\u003cli\u003eOptional hardener shortens dry time\u003c\/li\u003e\n\u003cli\u003eMade with renewable resources\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior raw wood furniture; Millwork; Woodworking projects\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and wax blend with urethane solids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e75-125 sq ft\/half-pint; 150-250 sq ft\/pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eImmediately per TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e24 hours if second coat is needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal 70°F and 50% humidity, out of direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1; second if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eWhite non-woven pad; Plastic spreader; Variable-speed buffer or sander on large surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eMineral spirits if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 50 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOptional GF Hard Wax Oil Hardener at 10% by volume; mixed product hardens after 4-6 hours; do not use GF NCO catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB807-UL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003ePrep (maker): Sand 120 then 220 grit; Remove dust; Wipe with mineral spirits and allow to dry.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eSand and clean raw wood\u003c\/li\u003e\n\u003cli\u003eStir thoroughly; mix optional 10% hardener\u003c\/li\u003e\n\u003cli\u003eApply thin coat with white non-woven pad or spreader\u003c\/li\u003e\n\u003cli\u003eRest 5 minutes, then wipe excess\u003c\/li\u003e\n\u003cli\u003eWait 24 hours before any second coat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Existing sealed finishes; Exterior use; Spray application.\u003c\/p\u003e\u003cp\u003e2023 Hard Wax Oil SDS: not classified as hazardous.\u003c\/p\u003e\u003cp\u003eProduct-soaked applicators may spontaneously ignite if improperly discarded.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eMaker coverage: 75-125 sq ft\/half-pint; 150-250 sq ft\/pint. Multiply by the number of coats you plan.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eMaker recoat guidance: 24 hours if second coat is needed, at the temperature and humidity on the label.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/maintenance-polishes-and-waxes\/hard-wax-oil-hardener\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673248104758,"sku":"B807-UL-PT","price":38.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121854.jpg?v=1791581911"},{"product_id":"general-finishes-hard-wax-oil-hardener-clear-4-oz","title":"General Finishes Hard Wax Oil Hardener, Clear, 4 oz","description":"\u003cp\u003eGeneral Finishes Hard Wax Oil Hardener is the optional additive for \u003ca href=\"\/products\/general-finishes-hard-wax-oil-clear-pint\"\u003eGF Hard Wax Oil\u003c\/a\u003e. Mix it in at 10% by volume to shorten the cure. The mixed product hardens after 4 to 6 hours, so mix only what you will use in that window, and do not swap in GF NCO catalyst. See more oil finishes in \u003ca href=\"\/collections\/wood-oil-finishes-paste-wax\"\u003ewood finishing oils and paste wax\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptional hardener\u003c\/li\u003e\n\u003cli\u003eShortens Hard Wax Oil dry time\u003c\/li\u003e\n\u003cli\u003eImproves water and chemical resistance of mixed finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eGF Hard Wax Oil for interior raw wood furniture and woodworking projects\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eHardener, clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003e4 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eHardener additive for Hard Wax Oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior Hard Wax Oil system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal 70°F and 50% humidity for the mixed finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eMix into GF Hard Wax Oil at 10% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits for mixed Hard Wax Oil application materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eHardener \u0026lt;0 g\/L per manufacturer product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eAdd 10% by volume to GF Hard Wax Oil; mixed product hardens after 4-6 hours and cannot be stored\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eA204\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003ePrep (maker): Stir Hard Wax Oil thoroughly before adding hardener.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eStir Hard Wax Oil\u003c\/li\u003e\n\u003cli\u003eAdd 10% Hardener by volume\u003c\/li\u003e\n\u003cli\u003eStir mixture well\u003c\/li\u003e\n\u003cli\u003eUse mixed finish within 4-6 hours\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: General Finishes NCO catalyst is not a substitute; Use on its own is not specified.\u003c\/p\u003e\u003cp\u003eDanger: 2023 Hardener SDS: harmful if inhaled; may cause asthma or breathing difficulties if inhaled; may cause allergic skin reaction.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Mineral spirits for mixed Hard Wax Oil application materials. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/maintenance-polishes-and-waxes\/hard-wax-oil-hardener\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673248235830,"sku":"A204","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121861.jpg?v=1791581913"},{"product_id":"general-finishes-oil-based-wood-bowl-finish-gloss-pint","title":"General Finishes Oil-Based Wood Bowl Finish, Gloss, Pint","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Oil-Based Wood Bowl Finish, Gloss, Pint\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOil and urethane finish\u003c\/li\u003e\n\u003cli\u003eGloss sheen\u003c\/li\u003e\n\u003cli\u003eDries amber\u003c\/li\u003e\n\u003cli\u003eFor decorative wood bowls and turnings\u003c\/li\u003e\n\u003cli\u003ePFAS-free per manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eDecorative wood bowls; Wood turnings; Raw or stained wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear, Gloss; dries amber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and urethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e50-60 sq ft\/pint; 100-120 sq ft\/quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e12+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e24+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e30 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eDry times based on 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3; no more than 3 recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton cloth; Natural bristle or foam brush; Staining pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003e10%-15% mineral spirits if desired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or waterless hand cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;575 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eSBPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Open-grain wood: sand 120, 150, then 180 grit; Closed-grain wood: sand 150 then 220 grit; Remove dust; wood dry and clean.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare raw wood and remove dust\u003c\/li\u003e\n\u003cli\u003eStir thoroughly\u003c\/li\u003e\n\u003cli\u003eApply 3 coats by cloth, brush or pad and wipe excess\u003c\/li\u003e\n\u003cli\u003eSand 220-320 grit between coats\u003c\/li\u003e\n\u003cli\u003eAllow 30 days to cure\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Actively chopped or cut countertops; manufacturer recommends Butcher Block Oil; Exterior use; Spray application.\u003c\/p\u003e\u003cp\u003eDanger: 2021 SDS: flammable liquid and vapor; aspiration hazard; may cause allergic skin reaction; suspected cancer and reproductive hazards; organ damage from prolonged or repeated exposure.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 50-60 sq ft\/pint; 100-120 sq ft\/quart. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 24+ hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-topcoats\/oil-based-wood-bowl-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673250038070,"sku":"SBPT","price":24.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016000272.jpg?v=1791581968"},{"product_id":"general-finishes-oil-based-wood-bowl-finish-gloss-quart","title":"General Finishes Oil-Based Wood Bowl Finish, Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Oil-Based Wood Bowl Finish, Gloss, Quart\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOil and urethane finish\u003c\/li\u003e\n\u003cli\u003eGloss sheen\u003c\/li\u003e\n\u003cli\u003eDries amber\u003c\/li\u003e\n\u003cli\u003eFor decorative wood bowls and turnings\u003c\/li\u003e\n\u003cli\u003ePFAS-free per manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eDecorative wood bowls; Wood turnings; Raw or stained wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear, Gloss; dries amber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and urethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e50-60 sq ft\/pint; 100-120 sq ft\/quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e12+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e24+ hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e30 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eDry times based on 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3; no more than 3 recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton cloth; Natural bristle or foam brush; Staining pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003e10%-15% mineral spirits if desired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or waterless hand cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;575 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eSBQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Open-grain wood: sand 120, 150, then 180 grit; Closed-grain wood: sand 150 then 220 grit; Remove dust; wood dry and clean.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare raw wood and remove dust\u003c\/li\u003e\n\u003cli\u003eStir thoroughly\u003c\/li\u003e\n\u003cli\u003eApply 3 coats by cloth, brush or pad and wipe excess\u003c\/li\u003e\n\u003cli\u003eSand 220-320 grit between coats\u003c\/li\u003e\n\u003cli\u003eAllow 30 days to cure\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Actively chopped or cut countertops; manufacturer recommends Butcher Block Oil; Exterior use; Spray application.\u003c\/p\u003e\u003cp\u003eDanger: 2021 SDS: flammable liquid and vapor; aspiration hazard; may cause allergic skin reaction; suspected cancer and reproductive hazards; organ damage from prolonged or repeated exposure.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 50-60 sq ft\/pint; 100-120 sq ft\/quart. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 24+ hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-topcoats\/oil-based-wood-bowl-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673250070838,"sku":"SBQT","price":37.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016000234.jpg?v=1791581970"},{"product_id":"general-finishes-wood-turners-finish-clear-8-oz","title":"General Finishes Wood Turner's Finish, Clear, 8 oz","description":"\u003cp\u003e\u003cstrong\u003eWood Turner's Finish, Clear, 8 oz\u003c\/strong\u003e is intended for Interior only use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSlight amber tone\u003c\/li\u003e\n\u003cli\u003eGloss finish\u003c\/li\u003e\n\u003cli\u003eRecoat on lathe in 10 minutes\u003c\/li\u003e\n\u003cli\u003eMore than 50% renewable resources\u003c\/li\u003e\n\u003cli\u003eOil-modified water-based urethane\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood turnings; Wood bowls; Other lathe-turned wood; GF water-based stained wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear; dries amber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003e8 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eHybrid oil\/water urethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e38 sq ft per 8 oz bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e10-30 minutes; under 10 minutes on lathe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e30+ minutes; 10 minutes on lathe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle or foam brush; Staining pad or rag; HVLP airbrush; On lathe at 3000 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water if desired; GF Extender for open time, 5%-15% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water or GF Brush \u0026amp; Gun Cleaner immediately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eBest as standalone over raw wood or GF water-based stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e8WTF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean surface of dust and contaminants; Let stain dry thoroughly; Sand no finer than 400 grit; Wipe oily exotic wood with acetone.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare and sand raw wood\u003c\/li\u003e\n\u003cli\u003eStir finish\u003c\/li\u003e\n\u003cli\u003eApply 3 or more coats by pad, brush or airbrush\u003c\/li\u003e\n\u003cli\u003eSand lightly between coats and remove dust\u003c\/li\u003e\n\u003cli\u003eAllow 21 days to cure\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Existing finishes; Non-wood substrates; Sanding Sealer or shellac underneath; Linseed or Danish oils; Tinting.\u003c\/p\u003e\u003cp\u003eWarning: 2021 SDS: causes skin and serious eye irritation; may cause respiratory irritation.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 38 sq ft per 8 oz bottle. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 30+ minutes; 10 minutes on lathe. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-topcoats-and-sanding-sealer\/wood-turners-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673255608630,"sku":"8WTF","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016108008.jpg?v=1791582128"},{"product_id":"howard-cutting-board-oil-light-tan-12-oz","title":"Howard Cutting Board Oil, Light Tan, 12 oz","description":"\u003cp\u003e\u003cstrong\u003eHoward Cutting Board Oil, Light Tan, 12 oz\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eColorless\u003c\/li\u003e\n\u003cli\u003eOdorless\u003c\/li\u003e\n\u003cli\u003eTasteless\u003c\/li\u003e\n\u003cli\u003eDoes not go rancid\u003c\/li\u003e\n\u003cli\u003eNo contact with nuts or gluten\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eCutting boards; Butcher blocks; Countertops; Wooden bowls; Utensils\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eLight Tan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003e12 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003e100% pure USP food-grade mineral oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eBBB012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/cutting-board-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673265602870,"sku":"BBB012","price":6.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682791218.jpg?v=1791582327"},{"product_id":"howard-butcher-block-conditioner-light-tan-12-oz","title":"Howard Butcher Block Conditioner, Light Tan, 12 oz","description":"\u003cp\u003e\u003cstrong\u003eHoward Butcher Block Conditioner, Light Tan, 12 oz\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFood-contact wood conditioner\u003c\/li\u003e\n\u003cli\u003eWater-resistant waxes\u003c\/li\u003e\n\u003cli\u003eSatin wax finish on butcher block countertops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eButcher blocks; Cutting boards; Wooden bowls; Utensils\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eLight Tan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003e12 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003efood-grade mineral oil, beeswax, and carnauba wax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eBBC012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/butcher-block-conditioner\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673265865014,"sku":"BBC012","price":6.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682791201.jpg?v=1791582329"},{"product_id":"howard-citrus-shield-premium-paste-wax-natural-11-oz","title":"Howard Citrus-Shield Premium Paste Wax, Natural, 11 oz","description":"\u003cp\u003e\u003cstrong\u003eHoward Citrus-Shield Premium Paste Wax, Natural, 11 oz\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeutral clear color\u003c\/li\u003e\n\u003cli\u003eBuffs after 3-5 minutes\u003c\/li\u003e\n\u003cli\u003eNo silicone oil\u003c\/li\u003e\n\u003cli\u003eNo linseed oil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eFinished wood; Unfinished wood; Painted surfaces; Concrete; Marble; Metal\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003e11 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ecarnauba wax, beeswax, and orange oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eCS0014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove dust and dirt; Test inconspicuous spot.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eWarning: Combustible liquid; may cause allergic skin reaction; toxic to aquatic life with long lasting effects.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/citrus-shield-premium-paste-wax\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673265963318,"sku":"CS0014","price":17.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682120018.jpg?v=1791582331"},{"product_id":"howard-feed-n-wax-wood-polish-and-conditioner-yellow-pint","title":"Howard Feed-N-Wax Wood Polish \u0026 Conditioner, Yellow, Pint","description":"\u003cp\u003e\u003cstrong\u003eHoward Feed-N-Wax Wood Polish \u0026amp; Conditioner, Yellow, Pint\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConditions wood\u003c\/li\u003e\n\u003cli\u003eBeeswax and carnauba wax protective coating\u003c\/li\u003e\n\u003cli\u003eRecommended after Restor-A-Finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eFinished wood; Unfinished wood; Furniture; Antiques; Cabinets\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ebeeswax, carnauba wax, orange oil, and conditioning oils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eFW0016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Food preparation surfaces.\u003c\/p\u003e\u003cp\u003eWarning: Combustible liquid; may cause allergic skin reaction; harmful to aquatic life with long lasting effects.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/feed-n-wax-wood-polish-conditioner\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673266028854,"sku":"FW0016","price":8.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682160113.jpg?v=1791904181"},{"product_id":"howard-restor-a-finish-wood-finish-restorer-neutral-pint","title":"Howard Restor-A-Finish Wood Finish Restorer, Neutral, Pint","description":"\u003cp\u003e\u003cstrong\u003eHoward Restor-A-Finish Wood Finish Restorer, Neutral, Pint\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlends minor scratches and blemishes\u003c\/li\u003e\n\u003cli\u003eRestores color and luster of existing finish\u003c\/li\u003e\n\u003cli\u003eNine colors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExisting lacquer finish; Existing shellac finish; Existing varnish finish; Most wood finishes\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNeutral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003esolvent and restoring oils with stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth; 0000 steel wool for stubborn marks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eHoward recommends Feed-N-Wax afterward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eRF1016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Choose closest finish color; Test inconspicuous spot.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Changing a wood finish to a different color.\u003c\/p\u003e\u003cp\u003eDanger: Highly flammable liquid and vapor; may be fatal if swallowed and enters airways; causes serious eye irritation; suspected of causing cancer and damaging fertility or the unborn child.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/restor-a-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673266061622,"sku":"RF1016","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682160014.jpg?v=1791582335"},{"product_id":"howard-restor-a-finish-wood-finish-restorer-maple-pine-pint","title":"Howard Restor-A-Finish Wood Finish Restorer, Maple-Pine, Pint","description":"\u003cp\u003e\u003cstrong\u003eHoward Restor-A-Finish Wood Finish Restorer, Maple-Pine, Pint\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlends minor scratches and blemishes\u003c\/li\u003e\n\u003cli\u003eRestores color and luster of existing finish\u003c\/li\u003e\n\u003cli\u003eNine colors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExisting lacquer finish; Existing shellac finish; Existing varnish finish; Most wood finishes\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eMaple-Pine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003esolvent and restoring oils with stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth; 0000 steel wool for stubborn marks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eHoward recommends Feed-N-Wax afterward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eRF2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Choose closest finish color; Test inconspicuous spot.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Changing a wood finish to a different color.\u003c\/p\u003e\u003cp\u003eDanger: Highly flammable liquid and vapor; may be fatal if swallowed and enters airways; causes serious eye irritation; suspected of causing cancer and damaging fertility or the unborn child.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/restor-a-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673266258230,"sku":"RF2016","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682160021.jpg?v=1791582338"},{"product_id":"howard-restor-a-finish-wood-finish-restorer-golden-oak-pint","title":"Howard Restor-A-Finish Wood Finish Restorer, Golden Oak, Pint","description":"\u003cp\u003e\u003cstrong\u003eHoward Restor-A-Finish Wood Finish Restorer, Golden Oak, Pint\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlends minor scratches and blemishes\u003c\/li\u003e\n\u003cli\u003eRestores color and luster of existing finish\u003c\/li\u003e\n\u003cli\u003eNine colors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExisting lacquer finish; Existing shellac finish; Existing varnish finish; Most wood finishes\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eGolden Oak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003esolvent and restoring oils with stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth; 0000 steel wool for stubborn marks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eHoward recommends Feed-N-Wax afterward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eRF3016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Choose closest finish color; Test inconspicuous spot.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Changing a wood finish to a different color.\u003c\/p\u003e\u003cp\u003eDanger: Highly flammable liquid and vapor; may be fatal if swallowed and enters airways; causes serious eye irritation; suspected of causing cancer and damaging fertility or the unborn child.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/restor-a-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673266422070,"sku":"RF3016","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682160038.jpg?v=1791582340"},{"product_id":"howard-restor-a-finish-wood-finish-restorer-walnut-pint","title":"Howard Restor-A-Finish Wood Finish Restorer, Walnut, Pint","description":"\u003cp\u003e\u003cstrong\u003eHoward Restor-A-Finish Wood Finish Restorer, Walnut, Pint\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlends minor scratches and blemishes\u003c\/li\u003e\n\u003cli\u003eRestores color and luster of existing finish\u003c\/li\u003e\n\u003cli\u003eNine colors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExisting lacquer finish; Existing shellac finish; Existing varnish finish; Most wood finishes\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eWalnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003esolvent and restoring oils with stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth; 0000 steel wool for stubborn marks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eHoward recommends Feed-N-Wax afterward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eRF4016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Choose closest finish color; Test inconspicuous spot.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Changing a wood finish to a different color.\u003c\/p\u003e\u003cp\u003eDanger: Highly flammable liquid and vapor; may be fatal if swallowed and enters airways; causes serious eye irritation; suspected of causing cancer and damaging fertility or the unborn child.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/restor-a-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673266684214,"sku":"RF4016","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682160045.jpg?v=1791582342"},{"product_id":"howard-restor-a-finish-wood-finish-restorer-mahogany-pint","title":"Howard Restor-A-Finish Wood Finish Restorer, Mahogany, Pint","description":"\u003cp\u003e\u003cstrong\u003eHoward Restor-A-Finish Wood Finish Restorer, Mahogany, Pint\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlends minor scratches and blemishes\u003c\/li\u003e\n\u003cli\u003eRestores color and luster of existing finish\u003c\/li\u003e\n\u003cli\u003eNine colors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExisting lacquer finish; Existing shellac finish; Existing varnish finish; Most wood finishes\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eMahogany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003esolvent and restoring oils with stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth; 0000 steel wool for stubborn marks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eHoward recommends Feed-N-Wax afterward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eRF5016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Choose closest finish color; Test inconspicuous spot.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Changing a wood finish to a different color.\u003c\/p\u003e\u003cp\u003eDanger: Highly flammable liquid and vapor; may be fatal if swallowed and enters airways; causes serious eye irritation; suspected of causing cancer and damaging fertility or the unborn child.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/restor-a-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673266749750,"sku":"RF5016","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682160052.jpg?v=1791582344"},{"product_id":"howard-restor-a-finish-wood-finish-restorer-dark-walnut-pint","title":"Howard Restor-A-Finish Wood Finish Restorer, Dark Walnut, Pint","description":"\u003cp\u003e\u003cstrong\u003eHoward Restor-A-Finish Wood Finish Restorer, Dark Walnut, Pint\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlends minor scratches and blemishes\u003c\/li\u003e\n\u003cli\u003eRestores color and luster of existing finish\u003c\/li\u003e\n\u003cli\u003eNine colors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExisting lacquer finish; Existing shellac finish; Existing varnish finish; Most wood finishes\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eDark Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003esolvent and restoring oils with stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth; 0000 steel wool for stubborn marks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eHoward recommends Feed-N-Wax afterward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eRF6016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Choose closest finish color; Test inconspicuous spot.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Changing a wood finish to a different color.\u003c\/p\u003e\u003cp\u003eDanger: Highly flammable liquid and vapor; may be fatal if swallowed and enters airways; causes serious eye irritation; suspected of causing cancer and damaging fertility or the unborn child.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/restor-a-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673266782518,"sku":"RF6016","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682160069.jpg?v=1791582346"},{"product_id":"howard-restor-a-finish-wood-finish-restorer-dark-oak-pint","title":"Howard Restor-A-Finish Wood Finish Restorer, Dark Oak, Pint","description":"\u003cp\u003e\u003cstrong\u003eHoward Restor-A-Finish Wood Finish Restorer, Dark Oak, Pint\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlends minor scratches and blemishes\u003c\/li\u003e\n\u003cli\u003eRestores color and luster of existing finish\u003c\/li\u003e\n\u003cli\u003eNine colors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExisting lacquer finish; Existing shellac finish; Existing varnish finish; Most wood finishes\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eDark Oak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003esolvent and restoring oils with stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth; 0000 steel wool for stubborn marks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eHoward recommends Feed-N-Wax afterward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eRF7016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Choose closest finish color; Test inconspicuous spot.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Changing a wood finish to a different color.\u003c\/p\u003e\u003cp\u003eDanger: Highly flammable liquid and vapor; may be fatal if swallowed and enters airways; causes serious eye irritation; suspected of causing cancer and damaging fertility or the unborn child.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/restor-a-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673266880822,"sku":"RF7016","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682160076.jpg?v=1791582348"},{"product_id":"howard-restor-a-finish-wood-finish-restorer-cherry-pint","title":"Howard Restor-A-Finish Wood Finish Restorer, Cherry, Pint","description":"\u003cp\u003e\u003cstrong\u003eHoward Restor-A-Finish Wood Finish Restorer, Cherry, Pint\u003c\/strong\u003e is intended for interior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlends minor scratches and blemishes\u003c\/li\u003e\n\u003cli\u003eRestores color and luster of existing finish\u003c\/li\u003e\n\u003cli\u003eNine colors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eExisting lacquer finish; Existing shellac finish; Existing varnish finish; Most wood finishes\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eCherry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003esolvent and restoring oils with stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSoft cloth; 0000 steel wool for stubborn marks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eHoward recommends Feed-N-Wax afterward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eRF9016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Choose closest finish color; Test inconspicuous spot.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Changing a wood finish to a different color.\u003c\/p\u003e\u003cp\u003eDanger: Highly flammable liquid and vapor; may be fatal if swallowed and enters airways; causes serious eye irritation; suspected of causing cancer and damaging fertility or the unborn child.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/shop.howardproducts.com\/products\/restor-a-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Howard","offers":[{"title":"Default Title","offer_id":67673266913590,"sku":"RF9016","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/088682160090.jpg?v=1791582350"},{"product_id":"minwax-tung-oil-finish-clear-light-amber-pint","title":"Minwax Tung Oil Finish, Clear Light Amber, Pint","description":"\u003cp\u003e\u003cstrong\u003eMinwax Tung Oil Finish, Clear Light Amber, Pint\u003c\/strong\u003e, is a penetrating, hand-rubbed oil finish for fine interior wood and furniture. Minwax says it soaks into the wood pores to bring back the look of dry, thirsty wood, which makes it a natural pick for newly refinished pieces, and you control the sheen: each coat adds more gloss. A tung oil finish can be refreshed later by simply wiping on another coat.\u003c\/p\u003e\n\u003ch3\u003eSpecifications (Minwax)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1 pint (UPC 027426475007, Minwax 47500)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eClear light amber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood: furniture, fine woodwork, refinished or stained wood. Not recommended for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 125 to 150 sq ft per quart, so a pint covers about half that\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuff\u003c\/th\u003e\n\u003ctd\u003e5 to 10 minutes after applying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e24 hours; two coats recommended, more coats for more gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eClean cloth or brush, in the direction of the grain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSand the wood smooth and even, then wipe off all dust with a cloth dampened with mineral spirits.\u003c\/li\u003e\n\u003cli\u003eIf you want color, apply \u003ca href=\"\/collections\/minwax-wood-finish-stain\"\u003eMinwax Wood Finish stain\u003c\/a\u003e first and let it dry completely.\u003c\/li\u003e\n\u003cli\u003eWipe or brush on a generous coat of Tung Oil Finish with the grain.\u003c\/li\u003e\n\u003cli\u003eAfter 5 to 10 minutes, buff evenly with a clean, lint-free cloth. If buffing is hard, Minwax says to recoat right away and buff.\u003c\/li\u003e\n\u003cli\u003eWait 24 hours and apply a second coat. For more gloss, repeat after another 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e Minwax lists about 125 to 150 sq ft per quart, so a pint covers about half that for one coat. Plan on two coats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on floors?\u003c\/strong\u003e No. Minwax says Tung Oil Finish is not recommended for floors. For floors, see the floor-rated finishes in \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put it over stain?\u003c\/strong\u003e Yes. Minwax directions say to apply Wood Finish stain first if you want color, and to make sure the stain is completely dry before the tung oil goes on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTung oil or Danish oil?\u003c\/strong\u003e Both are wipe-on penetrating finishes. Tung Oil Finish is clear light amber and builds gloss coat by coat; Watco Danish Oil also comes in stain colors. Compare them side by side in \u003ca href=\"\/collections\/wood-oil-finishes-paste-wax\"\u003ewood finishing oils and paste wax\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eContains aliphatic hydrocarbons. Keep away from heat and open flame and use with fresh air. Rags, steel wool and sanding dust soaked with this product may catch fire on their own if improperly discarded: put them in a sealed, water-filled metal container and dispose of them by local fire rules. Read the full label before use.\u003c\/p\u003e\n\u003cp\u003eAlso available: \u003ca href=\"\/products\/minwax-tung-oil-finish-clear-light-amber-quart\"\u003eQuart\u003c\/a\u003e. See all \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax stains and finishes\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.minwax.com\/en\/products\/specialty-finishes\/tung-oil-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673285624118,"sku":"47500","price":14.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426475007_1_0724.jpg?v=1791582696"},{"product_id":"minwax-tung-oil-finish-clear-light-amber-quart","title":"Minwax Tung Oil Finish, Clear Light Amber, Quart","description":"\u003cp\u003e\u003cstrong\u003eMinwax Tung Oil Finish, Clear Light Amber, Quart\u003c\/strong\u003e, is a penetrating, hand-rubbed oil finish for fine interior wood and furniture. Minwax says it soaks into the wood pores to bring back the look of dry, thirsty wood, which makes it a natural pick for newly refinished pieces, and you control the sheen: each coat adds more gloss. A tung oil finish can be refreshed later by simply wiping on another coat.\u003c\/p\u003e\n\u003ch3\u003eSpecifications (Minwax)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1 quart (UPC 027426675001, Minwax 67500)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eClear light amber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood: furniture, fine woodwork, refinished or stained wood. Not recommended for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 125 to 150 sq ft per quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuff\u003c\/th\u003e\n\u003ctd\u003e5 to 10 minutes after applying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e24 hours; two coats recommended, more coats for more gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eClean cloth or brush, in the direction of the grain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSand the wood smooth and even, then wipe off all dust with a cloth dampened with mineral spirits.\u003c\/li\u003e\n\u003cli\u003eIf you want color, apply \u003ca href=\"\/collections\/minwax-wood-finish-stain\"\u003eMinwax Wood Finish stain\u003c\/a\u003e first and let it dry completely.\u003c\/li\u003e\n\u003cli\u003eWipe or brush on a generous coat of Tung Oil Finish with the grain.\u003c\/li\u003e\n\u003cli\u003eAfter 5 to 10 minutes, buff evenly with a clean, lint-free cloth. If buffing is hard, Minwax says to recoat right away and buff.\u003c\/li\u003e\n\u003cli\u003eWait 24 hours and apply a second coat. For more gloss, repeat after another 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do I need?\u003c\/strong\u003e Minwax lists about 125 to 150 sq ft per quart for one coat. Plan on two coats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on floors?\u003c\/strong\u003e No. Minwax says Tung Oil Finish is not recommended for floors. For floors, see the floor-rated finishes in \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put it over stain?\u003c\/strong\u003e Yes. Minwax directions say to apply Wood Finish stain first if you want color, and to make sure the stain is completely dry before the tung oil goes on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTung oil or Danish oil?\u003c\/strong\u003e Both are wipe-on penetrating finishes. Tung Oil Finish is clear light amber and builds gloss coat by coat; Watco Danish Oil also comes in stain colors. Compare them side by side in \u003ca href=\"\/collections\/wood-oil-finishes-paste-wax\"\u003ewood finishing oils and paste wax\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eContains aliphatic hydrocarbons. Keep away from heat and open flame and use with fresh air. Rags, steel wool and sanding dust soaked with this product may catch fire on their own if improperly discarded: put them in a sealed, water-filled metal container and dispose of them by local fire rules. Read the full label before use.\u003c\/p\u003e\n\u003cp\u003eAlso available: \u003ca href=\"\/products\/minwax-tung-oil-finish-clear-light-amber-pint\"\u003ePint\u003c\/a\u003e. See all \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax stains and finishes\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.minwax.com\/en\/products\/specialty-finishes\/tung-oil-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673285755190,"sku":"67500","price":23.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426675001_1_0724.jpg?v=1791582698"},{"product_id":"minwax-paste-finishing-wax-natural-1-lb","title":"Minwax Paste Finishing Wax Natural 1 lb","description":"\u003cp\u003eMinwax Paste Finishing Wax in Natural, 1 lb, is a hand-rubbed paste wax that protects and adds hand-rubbed luster to finished and stained wood indoors. Minwax recommends it for furniture, antiques, woodwork, cabinets, doors, paneling and accessories that do not need the hard protective coat of polyurethane, and lists about 500 sq ft per pound.\u003c\/p\u003e\n\u003ch3\u003eSpecifications (Minwax)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eNatural \/ 1 lb (UPC 027426785007, Minwax 78500)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBlend of natural and synthetic waxes in mineral spirits, interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse on\u003c\/th\u003e\n\u003ctd\u003eClean, dry finished or stained wood; wait 24 hours after staining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 500 sq ft per lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1 or 2; a second coat gives a deeper luster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry before buffing\u003c\/th\u003e\n\u003ctd\u003e10 to 15 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eClean cloth or cheesecloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt about 500 sq ft per lb, one can covers about 500 sq ft with one thin coat, or about 250 sq ft if you plan two coats. Carved or open grain wood uses more.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStart on clean, dry finished or stained wood, free of dust and grease. On a fresh stain job, Minwax says to wait 24 hours before waxing.\u003c\/li\u003e\n\u003cli\u003eWipe on a thin, even coat with a clean cloth.\u003c\/li\u003e\n\u003cli\u003eLet it dry 10 to 15 minutes, then polish with a clean cloth or a buffer.\u003c\/li\u003e\n\u003cli\u003eFor a deeper luster, apply a second coat the same way.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003ch4\u003eWax or polyurethane?\u003c\/h4\u003e\n\u003cp\u003eMinwax positions Paste Finishing Wax for stained wood that does not need the hard protective coat of polyurethane, such as decorative pieces and antiques. For tabletops and other hard-wearing surfaces, choose a clear finish such as \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eHow do I keep a waxed finish looking good?\u003c\/h4\u003e\n\u003cp\u003eMinwax says to remove dirt with a slightly damp cloth and mild detergent, then lightly buff.\u003c\/p\u003e\n\u003ch4\u003eNatural or Dark?\u003c\/h4\u003e\n\u003cp\u003eBoth are Minwax Paste Finishing Wax; \u003ca href=\"\/products\/minwax-paste-finishing-wax-dark-1-lb\"\u003eDark\u003c\/a\u003e is the darker tone. Pick the one closer to your stain color and test it on a hidden spot.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eFlammable; contains aliphatic hydrocarbons. Keep away from heat and flame, use with fresh air, and read the full label before use.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eAlso available: \u003ca href=\"\/products\/minwax-paste-finishing-wax-dark-1-lb\"\u003eDark 1 lb\u003c\/a\u003e. Compare \u003ca href=\"\/products\/old-masters-paste-wax-clear-1-lb\"\u003eOld Masters Paste Wax\u003c\/a\u003e and \u003ca href=\"\/products\/howard-citrus-shield-premium-paste-wax-natural-11-oz\"\u003eHoward Citrus-Shield Paste Wax\u003c\/a\u003e, see more clear finishes in \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e, or shop the \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e collection.\u003c\/p\u003e\n","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673286148406,"sku":"78500","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426785007.jpg?v=1791582709"},{"product_id":"minwax-paste-finishing-wax-dark-1-lb","title":"Minwax Paste Finishing Wax Dark 1 lb","description":"\u003cp\u003eMinwax Paste Finishing Wax in Dark, 1 lb, is a hand-rubbed paste wax for interior finished wood. Minwax lists about 500 sq ft of coverage per pound. Apply a thin coat, let it set, then buff to a soft sheen.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePaste wax finish for furniture, cabinets, antiques and woodwork\u003c\/li\u003e\n\u003cli\u003eHand-rubbed luster over a sealed or previously finished surface\u003c\/li\u003e\n\u003cli\u003eAvailable in Natural and Dark\u003c\/li\u003e\n\u003cli\u003eAbout 500 sq ft per 1 lb can (Minwax product details)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eDark \/ 1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePaste finishing wax, interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 500 sq ft per lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2 recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e10-15 minutes \/ about 15 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eClean cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt about 500 sq ft per lb, one can covers about 500 sq ft with one thin coat, or about 250 sq ft if you plan two coats. Carved or porous wood uses more.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStart on clean, dry, finished wood. Wax is a top polish, not a standalone film finish for bare wood.\u003c\/li\u003e\n\u003cli\u003eWipe on a thin, even coat with a clean cloth.\u003c\/li\u003e\n\u003cli\u003eLet set 10-15 minutes, then buff. Apply a second coat the same way for a deeper polish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eAlso available: \u003ca href=\"\/products\/minwax-paste-finishing-wax-natural-1-lb\"\u003eNatural 1 lb\u003c\/a\u003e. See more clears in \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e and the \u003ca href=\"\/collections\/minwax\"\u003eMinwax\u003c\/a\u003e collection. Manufacturer details: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/specialty-finishes\/paste-finishing-wax\"\u003eMinwax Paste Finishing Wax\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673286181174,"sku":"78600","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426786004.jpg?v=1791582711"},{"product_id":"old-masters-tung-oil-varnish-quart","title":"Old Masters Tung Oil Varnish, Quart","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Tung Oil Varnish, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlend of tung oil and varnish\u003c\/li\u003e\n\u003cli\u003eWater and alcohol resistant finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior bare wood; Antiques; Fine furniture; Cabinets; Tables; Bar tops\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003etung oil and varnish blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 678 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 4 to 6 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAfter 4 to 6 hours and light buffing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eLint-free cloth; Brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eMaximum 450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e50504\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, glue and contaminants.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare wood\u003c\/li\u003e\n\u003cli\u003eApply with cloth or brush along grain\u003c\/li\u003e\n\u003cli\u003eWipe excess with clean cloth\u003c\/li\u003e\n\u003cli\u003eWait 4 to 6 hours, buff lightly with fine steel wool and remove dust\u003c\/li\u003e\n\u003cli\u003eReapply if desired\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eDanger: Flammable liquid and vapor; skin sensitization, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration hazards.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 678 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is After 4 to 6 hours and light buffing. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/tung-oil-varnish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673305907510,"sku":"50504","price":35.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348505049.jpg?v=1791583043"},{"product_id":"old-masters-tung-oil-pint","title":"Old Masters Tung Oil, Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Tung Oil, Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil finish\u003c\/li\u003e\n\u003cli\u003eWater and alcohol resistant when finished\u003c\/li\u003e\n\u003cli\u003eAbsorbs into wood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior bare wood; Antiques; Fine furniture\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 300 to 400 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 8 to 12 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAfter first coat dries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eDo not apply more coats than wood can absorb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eLint-free cloth; Hand application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eUp to 1 part mineral spirits to 1 part Tung Oil for application on large surfaces or high humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eCleaning solvent compliant with local air-quality rules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eMaximum 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e90008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean and dry bare wood\u003c\/li\u003e\n\u003cli\u003eApply with cloth or hand\u003c\/li\u003e\n\u003cli\u003eWipe off excess oil\u003c\/li\u003e\n\u003cli\u003eAllow first coat to dry; rub with 0000 steel wool if applying second\u003c\/li\u003e\n\u003cli\u003eRepeat without applying more than wood can absorb\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eDanger: May cause allergic skin reaction, genetic defects, cancer, and reproductive harm.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 300 to 400 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is After first coat dries. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/tung-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673305940278,"sku":"90008","price":27.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348900080.jpg?v=1791583045"},{"product_id":"old-masters-tung-oil-quart","title":"Old Masters Tung Oil, Quart","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Tung Oil, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil finish\u003c\/li\u003e\n\u003cli\u003eWater and alcohol resistant when finished\u003c\/li\u003e\n\u003cli\u003eAbsorbs into wood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior bare wood; Antiques; Fine furniture\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 300 to 400 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 8 to 12 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAfter first coat dries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eDo not apply more coats than wood can absorb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eLint-free cloth; Hand application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eUp to 1 part mineral spirits to 1 part Tung Oil for application on large surfaces or high humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eCleaning solvent compliant with local air-quality rules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eMaximum 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e90004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean and dry bare wood\u003c\/li\u003e\n\u003cli\u003eApply with cloth or hand\u003c\/li\u003e\n\u003cli\u003eWipe off excess oil\u003c\/li\u003e\n\u003cli\u003eAllow first coat to dry; rub with 0000 steel wool if applying second\u003c\/li\u003e\n\u003cli\u003eRepeat without applying more than wood can absorb\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eDanger: May cause allergic skin reaction, genetic defects, cancer, and reproductive harm.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 300 to 400 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is After first coat dries. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/tung-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673305973046,"sku":"90004","price":52.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348900042.jpg?v=1791583046"},{"product_id":"old-masters-tung-oil-gallon","title":"Old Masters Tung Oil, Gallon","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Tung Oil, Gallon\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil finish\u003c\/li\u003e\n\u003cli\u003eWater and alcohol resistant when finished\u003c\/li\u003e\n\u003cli\u003eAbsorbs into wood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior bare wood; Antiques; Fine furniture\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 300 to 400 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 8 to 12 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAfter first coat dries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eDo not apply more coats than wood can absorb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eLint-free cloth; Hand application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eUp to 1 part mineral spirits to 1 part Tung Oil for application on large surfaces or high humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eCleaning solvent compliant with local air-quality rules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eMaximum 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e90001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean and dry bare wood\u003c\/li\u003e\n\u003cli\u003eApply with cloth or hand\u003c\/li\u003e\n\u003cli\u003eWipe off excess oil\u003c\/li\u003e\n\u003cli\u003eAllow first coat to dry; rub with 0000 steel wool if applying second\u003c\/li\u003e\n\u003cli\u003eRepeat without applying more than wood can absorb\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eDanger: May cause allergic skin reaction, genetic defects, cancer, and reproductive harm.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 300 to 400 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is After first coat dries. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/tung-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673306005814,"sku":"90001","price":156.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348900011.jpg?v=1791583048"},{"product_id":"old-masters-paste-wax-clear-1-lb","title":"Old Masters Paste Wax, Clear, 1 lb","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Paste Wax, Clear, 1 lb\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eContains carnauba wax\u003c\/li\u003e\n\u003cli\u003eUsed as wood polish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eother\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 1,600 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e15 to 30 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eSecond application recommended on newly refinished surfaces after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eThin coat; second application on newly refinished surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eClean lint-free cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e30901\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, glue and other contaminants.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean and dry wood\u003c\/li\u003e\n\u003cli\u003eApply thin even wax coat with lint-free cloth\u003c\/li\u003e\n\u003cli\u003eAllow to dry fully\u003c\/li\u003e\n\u003cli\u003ePolish surface\u003c\/li\u003e\n\u003cli\u003eOn newly refinished surfaces, apply second coat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eCaution: SDS classifies flammable solid; may cause eye and skin irritation.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 1,600 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is Second application recommended on newly refinished surfaces after drying. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/paste-wax\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673306038582,"sku":"30901","price":22.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348309012.jpg?v=1791583050"}],"url":"https:\/\/projectweekenddiy.com\/collections\/wood-oil-finishes-paste-wax.oembed","provider":"Project Weekend DIY","version":"1.0","type":"link"}