{"title":"Protective Finishes \u0026 Topcoats","description":"\u003cdiv class=\"collection-intro\"\u003e\n\u003cp\u003eWater-based polyurethane and clear topcoats protect stained or painted furniture, cabinets, and interior woodwork. This collection gathers clear finishes from General Finishes, Varathane, Minwax, Old Masters, Watco, ZAR, and McCloskey, plus shellac and lacquer sanding sealers, penetrating oils, waxes, and a pour-on epoxy finish. Start with \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGeneral Finishes High Performance\u003c\/a\u003e for brush-on furniture and cabinets, then pick by job: Enduro Clear Poly, Pre-Cat Lacquer, or Conversion Varnish for spray work; Exterior 450 or a spar urethane for outdoor wood; oil-based poly or Arm-R-Seal when you want a warm amber tone; and Danish, tung, or teak oil for a close-to-the-wood look.\u003c\/p\u003e\n\u003cp\u003eWhen layering, General Finishes says to let oil-based products dry 72+ hours before a water-based topcoat and let water-based products dry 24+ hours before an oil-based coat. Above 75% humidity, water-based finishes can blush; GF suggests its Accelerator plus extra air movement. Never pair a water-based topcoat with linseed or Danish oil systems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eLines in this collection\u003c\/th\u003e\n\u003cth\u003eBrand pages\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater-based poly and clear coats\u003c\/td\u003e\n\u003ctd\u003eGF High Performance, Flat Out, Enduro Clear and White Poly; Varathane Ultimate Water-Based Poly, Triple Thick, Soft Touch; Minwax Polycrylic; Old Masters Armor and Water-Based Clear; ZAR Exterior Water-Based HP\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e, \u003ca href=\"\/collections\/varathane\"\u003eVarathane\u003c\/a\u003e, \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpray-grade and 2K\u003c\/td\u003e\n\u003ctd\u003eGF Enduro 2K Poly, Pre-Cat Lacquer, Conversion Varnish, Enduro Extender; Minwax and Watco aerosol lacquer\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e, \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil-based poly and gel\u003c\/td\u003e\n\u003ctd\u003eMinwax Fast-Drying Poly, Super Fast-Drying Poly for Floors, Wipe-On Poly; Varathane and ZAR interior oil poly and ZAR OMU; Old Masters oil and gel poly; GF Arm-R-Seal and Gel Topcoat\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/collections\/old-masters\"\u003eOld Masters\u003c\/a\u003e, \u003ca href=\"\/collections\/zar\"\u003eZAR\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExterior, spar, and marine\u003c\/td\u003e\n\u003ctd\u003eGF Exterior 450; Varathane Outdoor Water-Based and oil-based spar urethane; Minwax Helmsman Spar spray; Old Masters Spar-Marine; McCloskey Man O'War; ZAR Exterior UV Poly\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/collections\/mccloskey\"\u003eMcCloskey\u003c\/a\u003e, \u003ca href=\"\/collections\/varathane\"\u003eVarathane\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSealers and shellac\u003c\/td\u003e\n\u003ctd\u003eZinsser Bulls Eye shellac and SealCoat; ProLuxe and Gemini lacquer sanding sealers; Old Masters sanding sealer; GF Seal-A-Cell\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/collections\/zinsser\"\u003eZinsser\u003c\/a\u003e, \u003ca href=\"\/collections\/proluxe\"\u003eProLuxe\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOils, waxes, and specialty\u003c\/td\u003e\n\u003ctd\u003eWatco Danish and teak oil; Old Masters and Minwax tung oil; Daly's SeaFin and Messmer's teak oil; Howard butcher block products; GF Wood Bowl and Wood Turner's finish; paste waxes; EnviroTex Lite pour-on; Flood Penetrol\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e, \u003ca href=\"\/collections\/howard\"\u003eHoward\u003c\/a\u003e, \u003ca href=\"\/collections\/envirotex\"\u003eEnviroTex\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eA few prep products also live here: wood conditioners (Varathane, Old Masters, GF), GF Water Based Dye Stain, CitriStrip stripping gel, B-I-N primer, and Okon W-2 masonry sealer.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eGeneral Finishes High Performance (GF data)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWater-based acrylic\/urethane blend; dries clear, non-ambering; interior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheens\u003c\/td\u003e\n\u003ctd\u003eDead Flat (\u0026lt;5), Flat (10 or less), Satin (25–35), Semi-Gloss (50–60), Gloss (80+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eUp to 600 sq ft per gallon (TDS); about 125–150 per quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoats\u003c\/td\u003e\n\u003ctd\u003e3–4 total coats recommended (TDS); no sealer required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry time\u003c\/td\u003e\n\u003ctd\u003eTouch 30 min; recoat 2 hr at 70°F \/ 50% humidity; full cure 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC\u003c\/td\u003e\n\u003ctd\u003eFlat–Gloss under 173 g\/L (Dec 2021 TDS); Dead Flat under 225 g\/L (GF spec sheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eShop related: \u003ca href=\"\/collections\/wood-oil-finishes-paste-wax\"\u003ewood finishing oils and paste wax\u003c\/a\u003e, \u003ca href=\"\/collections\/spray-polyurethane\"\u003espray polyurethane and clear spray finishes\u003c\/a\u003e, \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e, \u003ca href=\"\/collections\/shellac\"\u003eshellac and SealCoat\u003c\/a\u003e, \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGF High Performance\u003c\/a\u003e, \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e, \u003ca href=\"\/collections\/cabinet-refinishing\"\u003ecabinet refinishing\u003c\/a\u003e, and the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing cart\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich topcoat for cabinets and tabletops?\u003c\/summary\u003e\u003cp\u003eGeneral Finishes calls High Performance its best choice for high-use areas such as tabletops and kitchen cabinets. It brushes, rolls, or sprays and dries clear.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill a water-based topcoat amber?\u003c\/summary\u003e\u003cp\u003eGF lists High Performance as water white in the can and non-ambering. Oil-based topcoats such as Arm-R-Seal and Gel Topcoat amber as they age.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I topcoat over oil stain?\u003c\/summary\u003e\u003cp\u003eYes, once it is fully dry. General Finishes says let oil-based products dry 72+ hours before a water-based topcoat, and not to use water-based products with linseed or Danish oil.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I clear-coat white paint?\u003c\/summary\u003e\u003cp\u003eGeneral Finishes warns against any clear topcoat over white or light paint because it can yellow. Use a white poly or a self-sealing paint instead.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eInterior or exterior?\u003c\/summary\u003e\u003cp\u003eHigh Performance is interior only. For outdoor wood, look at GF Exterior 450, spar urethanes, or marine spar varnish.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e","products":[{"product_id":"advanced-synthetic-shellac-primer","title":"Zinsser B-I-N Advanced Synthetic Shellac Primer Quart","description":"\u003cp\u003eZinsser B-I-N Advanced is a synthetic shellac-based primer sealer for whole-surface interior priming and exterior spot priming. It blocks tough stains and odors, dries fast with low odor, and cleans up with soap and water. Use it under and over any latex or oil-based paint, on bare or painted wood, drywall, cured plaster, masonry, galvanized metal and PVC.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlocks stains from water, nicotine, grease, oil, soot, rust, mildew, tannin, crayon and lipstick\u003c\/li\u003e\n\u003cli\u003eSeals odors from fire damage, smoke, cigarettes, pet urine and fireplaces\u003c\/li\u003e\n\u003cli\u003eSeals knots and sap streaks\u003c\/li\u003e\n\u003cli\u003eSticks to glossy enamel, varnish, paneling, laminate, glass and ceramic tile without sanding or de-glossing\u003c\/li\u003e\n\u003cli\u003eOne coat primes most surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize \/ color\u003c\/th\u003e\n\u003ctd\u003e1 quart \/ white (tint to off-white or pastels with up to 2 oz universal colorant per gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e75-100 sq ft per quart (300-400 sq ft per gallon), depending on method and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times\u003c\/th\u003e\n\u003ctd\u003eTouch 25 minutes, recoat 45 minutes, stain sealing 2 hours, full hardness 7 days (70 F, 50% RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply at\u003c\/th\u003e\n\u003ctd\u003e50-90 F, humidity below 85%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eQuality brush, 3\/8 in. nap roller or airless sprayer (0.015-0.017 in. tip, 1700-2200 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eUp to 10 oz of water per gallon, if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 100 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClean up\u003c\/th\u003e\n\u003ctd\u003eWarm soap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e271009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eOne quart primes about 75-100 sq ft in one coat, which is usually all you need. Very porous surfaces may need a second coat, which halves that area to about 37-50 sq ft. For spot priming stains and knots, a quart goes a long way.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClean the surface of dust, grime, grease, wax and mildew. Remove peeling paint and sand the edges smooth. Remove as much of any stain as you can, then let the surface dry.\u003c\/li\u003e\n\u003cli\u003eMix or shake well. Apply one coat with a brush, roller or airless sprayer; for best results, prime the entire surface.\u003c\/li\u003e\n\u003cli\u003eTopcoat after 45 minutes. Over knots and stains, allow 2 hours. A water stain may show in the primer as it dries; Zinsser notes it is locked in and will not bleed into the topcoat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eNot for full exterior priming, very humid rooms, or surfaces under water or in prolonged contact with it. Outdoors, spot prime only under high-hiding paint, or prime the whole surface with Bulls-Eye 1-2-3 after spot priming. Do not mix with other products. Read the \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/DigitalEncyclopedia\/Documents\/RustoleumUSA\/TDS\/English\/CBG\/Zinsser\/BIN-01_B-I-N_Advanced_Synthetic_Shellac_Primer-TDS_3.ashx\"\u003eB-I-N Advanced technical data sheet\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSee more \u003ca href=\"\/collections\/zinsser\"\u003eZinsser primers\u003c\/a\u003e and the \u003ca href=\"\/pages\/zinsser-primers-sealers\"\u003eZinsser primer guide\u003c\/a\u003e, shop \u003ca href=\"\/collections\/prep-patch-specialty-coatings\"\u003eprep and patch supplies\u003c\/a\u003e, or plan the job with the \u003ca href=\"\/pages\/paint-cabinets-project-cart\"\u003ecabinet project cart\u003c\/a\u003e or the \u003ca href=\"\/pages\/paint-a-room-project-cart\"\u003epaint-a-room project cart\u003c\/a\u003e.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":53527989027126,"sku":"534-391","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/020066228781.jpg?v=1767458727"},{"product_id":"water-repellent-sealer-porous-surface","title":"Zinsser Okon W-2 Water Repellent Concrete \u0026 Masonry Sealer Gallon","description":"\u003ch2\u003eZinsser Okon W-2 Water Repellent Concrete \u0026amp; Masonry Sealer Gallon\u003c\/h2\u003e\n\u003cp\u003eFormulated for use on medium and normal weight concrete block, rough stucco, and cast stone. Protects against water intrusion, efflorescence and freeze-thaw damage. Water-based, low VOC, breathable, clear and non-yellowing.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eZinsser Okon Water-Repellent Sealer, 1 gal Container, Clear, Liquid\u003c\/li\u003e\n  \u003cli\u003eFormulated for use on medium and normal weight concrete block, rough stucco, and cast stone\u003c\/li\u003e\n  \u003cli\u003eProtects against water intrusion, efflorescence and freeze-thaw damage\u003c\/li\u003e\n  \u003cli\u003eWater-based, low VOC, breathable, clear and non-yellowing\u003c\/li\u003e\n  \u003cli\u003eProprietary blend of acrylic micro emulsions and a silane-siloxane solution\u003c\/li\u003e\n  \u003cli\u003eMicro-emulsions penetrate the surface to establish a water repelling barrier in the subsurface of the concrete and masonry\u003c\/li\u003e\n  \u003cli\u003eHelps protect porous concrete and masonry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuild the cart around the prep, application, and cleanup steps so you can conquer the weekend with fewer store runs.\u003c\/p\u003e\n\u003cp\u003eBuild the rest of your project cart with \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e.\u003c\/p\u003e","brand":"Zinsser","offers":[{"title":"Default Title","offer_id":53527989911862,"sku":"321-034","price":47.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/749505920016.jpg?v=1767458754"},{"product_id":"general-finishes-enduro-extender-clear-pint","title":"General Finishes Enduro Extender Clear Pint","description":"\u003cp\u003eGeneral Finishes Extender is a water-based wetting additive that slows the drying time and improves the flow and leveling of General Finishes water-based stains, topcoats, primers, glazes and paints. GF recommends it for large surfaces and for finishing in hot or dry rooms, where a finish can dry before it levels out, and highly recommends it with GF Glaze Effects. It is for water-based products only; do not add it to oil-based finishes. This is the 16 oz (1 pint) bottle.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePerformance additive, water-based, clear (no ambering)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse with\u003c\/th\u003e\n\u003ctd\u003eGeneral Finishes water-based stains, topcoats, primers, glazes and paints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHow much to add\u003c\/th\u003e\n\u003ctd\u003eStart at 5% by volume, about 1.5 oz per quart (GF TDS). GF's current directions say 10 to 15% where local rules allow. Do not go over 15%, about 5 oz per quart.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16 oz (1 pint). GF also makes 4 oz bottles, gallons and 5 gallon pails.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 1,025 g\/L as packaged; see the VOC note below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClean up\u003c\/th\u003e\n\u003ctd\u003eSoap and water for hands; GF Brush \u0026amp; Gun Cleaner for equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eKeep between 50 and 100 F. GF says its additives will not freeze, but heat-damaged product cannot be saved.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eSlowly add Extender to the water-based finish, starting at 5% by volume.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly to blend it in.\u003c\/li\u003e\n\u003cli\u003eTest on scrap or a hidden spot before the full job.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhen should I use Extender?\u003c\/h4\u003e\n\u003cp\u003eWhen a water-based finish dries before it can flow out and level. GF recommends it for finishing large areas and for warm or dry rooms. If the problem is a cold or humid room where the finish dries too slowly, GF makes Accelerator for that instead.\u003c\/p\u003e\n\u003ch4\u003eCan I store a can of finish after adding Extender?\u003c\/h4\u003e\n\u003cp\u003eYes. General Finishes says mixes of its water-based products with up to 15% Extender can be stored, and Extender does not change the shelf life of the product it is added to.\u003c\/p\u003e\n\u003ch4\u003eDoes Extender raise the VOC of my finish?\u003c\/h4\u003e\n\u003cp\u003eYes, it adds VOC. GF says it can be used in VOC-regulated areas only as long as the amount added keeps the finish under the legal limit, and that amount varies by product. GF notes that in California, adding more than 2% makes its products non-compliant with SCAQMD rules.\u003c\/p\u003e\n\u003ch4\u003eCan I use it to wipe off Glaze Effects?\u003c\/h4\u003e\n\u003cp\u003eYes. GF says to dampen a cloth or paper towel with Extender to remove freshly applied, dry Glaze Effects.\u003c\/p\u003e\n\u003cp\u003eAlso sold here in a \u003ca href=\"\/products\/general-finishes-enduro-water-based-extender-clear-4-oz\"\u003e4 oz bottle\u003c\/a\u003e. Pair it with \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGeneral Finishes High Performance topcoat\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-glaze-effects-clear-base-pint\"\u003eGlaze Effects\u003c\/a\u003e or \u003ca href=\"\/collections\/general-finishes-milk-paint\"\u003eGF Milk Paint\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53528045748534,"sku":"196-728","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016107117.jpg?v=1767459463"},{"product_id":"general-finishes-water-based-dye-stain-blue-pint","title":"General Finishes Water Based Dye Stain Blue Pint","description":"\u003ch2\u003eGeneral Finishes Water Based Dye Stain Blue Pint\u003c\/h2\u003e\n\u003cp\u003eWater-based Dye Stains penetrate deep into the wood to beautifully magnify the grain. They will provide your project with more depth and color vibrancy than any other wood stain. This product is excellent for highly figured woods like mahogany, walnut or maple. Dye stains can also be used as a toner when mixed with Water Based Topcoats. Add it to your weekend project plan and conquer your to-do list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDry Time - Touch: Raw Wood (30+ min.), Existing Finish (1+ hr)\u003c\/li\u003e\n  \u003cli\u003eDry Time - Recoat: 2+ hours (General Finishes TDS and product page)\u003c\/li\u003e\n  \u003cli\u003eCoverage: 75 sq. ft\/pint, 150 sq. ft\/quart, 600 sq. ft\/gal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuild the rest of your project cart with \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53595005649206,"sku":"196-421","price":25.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/pint-general-finishes-wb-dye-stain-blue-5941763.jpg?v=1769119991"},{"product_id":"general-finishes-water-based-dye-stain-cinnamon-pint","title":"General Finishes Water Based Dye Stain Cinnamon Pint","description":"\u003ch2\u003eGeneral Finishes Water Based Dye Stain Cinnamon Pint\u003c\/h2\u003e\n\u003cp\u003eWater-based Dye Stains penetrate deep into the wood to beautifully magnify the grain. They will provide your project with more depth and color vibrancy than any other wood stain. This product is excellent for highly figured woods like mahogany, walnut or maple. Dye stains can also be used as a toner when mixed with Water Based Topcoats. Add it to your weekend project plan and conquer your to-do list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eType: Water Based Stain\u003c\/li\u003e\n  \u003cli\u003eBase Type: Water\u003c\/li\u003e\n  \u003cli\u003eApplication: Interior only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuild the rest of your project cart with \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53595005681974,"sku":"196-424","price":25.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/pint-general-finishes-wb-dye-stain-cinnamon-1706917.jpg?v=1769119985"},{"product_id":"general-finishes-enduro-poly-clear-dead-flat-gallon","title":"General Finishes Enduro Clear Poly Dead Flat Gallon","description":"\u003ch2\u003eGeneral Finishes Enduro Clear Poly Dead Flat Gallon\u003c\/h2\u003e\n\u003cp\u003eEnduro Clear Poly is General Finishes' professional-grade water-based topcoat, a self-crosslinking 1K acrylic and urethane blend that dries clear and builds a tough, abrasion-resistant film on interior cabinets, trim, doors and furniture. The Dead Flat sheen (under 5 on the gloss scale) gives a near-raw-wood look without the traditional flattening compounds that can cloud a finish. This is the 1 gallon can.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional water-based poly, low odor, soap and water hand cleanup\u003c\/li\u003e\n\u003cli\u003eDead Flat sheen, under 5 on the gloss scale\u003c\/li\u003e\n\u003cli\u003eUse over raw wood, fully dry stain, and non-white painted surfaces\u003c\/li\u003e\n\u003cli\u003eCan be used without a sealer; 1 to 2 coats of GF Sanding Sealer add faster build\u003c\/li\u003e\n\u003cli\u003eShort-filled about 10% to leave room for zero-VOC tint colorant\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II VOC rules\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based acrylic\/urethane blend, 1K (no hardener)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eDead Flat (under 5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior cabinets, trim, doors, furniture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003e3 to 4 total coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness\u003c\/th\u003e\n\u003ctd\u003e3 to 5 mils wet per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time (70 F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch: 30 minutes. Recoat: 2 hours. Full cure: 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003ePencil F, Koenig 72, Sward 12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eMedium, 350 to 450 cPs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpray setup\u003c\/th\u003e\n\u003ctd\u003eHVLP 1.1 to 1.3 mm; air-assisted airless 600 PSI pump, 20 PSI assist air, .011 in tip; airless fine finish .007 to .011 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eDistilled water (start at 5%, up to 10% by volume), GF Extender for open time, GF Accelerator for humid shops\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eHands: soap and water. Equipment: GF Brush and Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 233 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e197-300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrep raw wood by sanding no finer than 220 grit and removing dust. For an existing finish, clean with a 50:50 mix of denatured alcohol and water on a maroon non-woven pad, let dry 1 to 2 hours, then scuff with a 220 to 320 grit foam pad.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Strain before spraying and lay down wet coats of 3 to 5 mils.\u003c\/li\u003e\n\u003cli\u003eEnduro is engineered for spraying. Cabinet face frames, edges and drawer fronts can be rolled with a small 3\/8 in nap microfiber roller; adding 10% to 20% GF Extender helps leveling.\u003c\/li\u003e\n\u003cli\u003eSand lightly between coats with a 220 to 320 grit foam pad and remove dust. Over oil-based stain, let the stain dry at least 72 hours first.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eDo not use any clear coat, including this one, over white or light paints such as GF Milk Paint whites, because it can yellow. Use Enduro White Poly for white finishes. Store above 50 F and below 80 F, out of direct sun; best used within one year of the date on the can. Read the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2023-02-enduro-clear-poly.pdf?v=1791748626\"\u003etechnical data sheet\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-enduro-clear-poly-dead-flat.pdf?v=1791748625\"\u003esafety data sheet\u003c\/a\u003e before use.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I brush it?\u003c\/strong\u003e General Finishes designs Enduro for spray. For small areas use a short-nap microfiber roller with Extender. For an all-brush project, High Performance Topcoat is the brushable choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a sealer?\u003c\/strong\u003e No. It can go straight onto raw wood; a first coat of GF Sanding Sealer just builds faster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I can use the cabinets?\u003c\/strong\u003e Handle gently after drying and allow 21 days to cure fully before heavy use or cleaning with commercial products.\u003c\/p\u003e\n\u003cp\u003eShop more in \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e, compare \u003ca href=\"\/products\/general-finishes-enduro-clear-polyurethane-satin-gallon\"\u003eEnduro Clear Poly Satin\u003c\/a\u003e, add \u003ca href=\"\/products\/general-finishes-enduro-extender-clear-pint\"\u003eEnduro Extender\u003c\/a\u003e for longer open time, or see \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGF High Performance\u003c\/a\u003e for brushing. Planning a kitchen? Start with the \u003ca href=\"\/pages\/paint-cabinets-project-cart\"\u003ecabinet project cart\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53595008172342,"sku":"197-300","price":174.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/gal-general-finishes-enduro-poly-clear-dead-flat-4952475.jpg?v=1769119938"},{"product_id":"general-finishes-ext-450-water-based-finish-clear-gloss-gallon","title":"General Finishes Exterior 450 Clear Gloss Gallon","description":"\u003cp\u003eGeneral Finishes Exterior 450 is a water-based urethane\/acrylic clear topcoat for vertical exterior surfaces such as fences, patio furniture, garage doors, entrance doors, outdoor kitchens and interior windows. It is not recommended as a deck finish. This gallon is the Gloss sheen.\u003c\/p\u003e\n\u003cp\u003eExterior 450 is fortified with UV absorbers to help protect the finish film, and it includes a built-in mildewcide to slow mold and mildew growth. It works as a clear coat or as an optional topcoat over darker General Finishes Milk Paint colors. Do not use it over light or white paints, because yellowing may occur.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater white in the can, dries clear, and does not amber\u003c\/li\u003e\n\u003cli\u003eSelf-sealing; usable over existing finishes with proper prep\u003c\/li\u003e\n\u003cli\u003eBrush, roll or spray (HVLP tip 1.1-1.3 mm)\u003c\/li\u003e\n\u003cli\u003eSoap and water cleanup for hands; GF Brush and Gun Cleaner for equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen \/ size\u003c\/th\u003e\n\u003ctd\u003eGloss (80+) \/ 1 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based urethane\/acrylic blend \/ exterior vertical surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 560-640 sq ft per gallon per coat (General Finishes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3 coats; TDS recommends at least 3 total coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes at about 70 F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2+ hours in ideal conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use \/ full cure\u003c\/th\u003e\n\u003ctd\u003e7-10 days \/ 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 125 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eAbout 29% by volume, 30% by weight (Gloss)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eWater, GF Extender or GF Accelerator per TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eGXG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt 560-640 sq ft per gallon per coat, a 3-coat finish from one gallon covers roughly 185-210 sq ft. A 2-coat finish covers roughly 280-320 sq ft.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove dust. Freshly stained wood: apply only after the stain is fully dry.\u003c\/li\u003e\n\u003cli\u003ePreviously finished wood: clean with a 50:50 denatured alcohol\/water mix, then sand lightly with a 220-320 grit pad and remove dust. Test adhesion.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly. Apply 2-3 coats out of direct sun. Sand lightly between coats with a fine pad and remove dust.\u003c\/li\u003e\n\u003cli\u003eAllow full cure before heavy weather exposure. Always follow the product label and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-exterior-450-topcoat.pdf?v=1791748626\"\u003eExterior 450 technical data sheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot for decks\u003c\/li\u003e\n\u003cli\u003eThe UV additive protects the finish film; it does not stop wood from changing color in sunlight\u003c\/li\u003e\n\u003cli\u003eDo not use over linseed or Danish oil finishes\u003c\/li\u003e\n\u003cli\u003eTest for adhesion and appearance before starting the full project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this on a deck?\u003c\/strong\u003e No. Exterior 450 is for vertical exterior surfaces, not decks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I topcoat Milk Paint with it?\u003c\/strong\u003e Yes over darker Milk Paint colors. Do not use over light or white paints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before another coat?\u003c\/strong\u003e About 2+ hours in ideal conditions; cool or humid weather can take longer.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/products\/general-finishes-exterior-450-topcoat-clear-gloss-quart\"\u003eExterior 450 Gloss Quart\u003c\/a\u003e. \u003ca href=\"\/products\/general-finishes-exterior-450-water-based-topcoat-satin-gallon\"\u003eExterior 450 Satin Gallon\u003c\/a\u003e. Shop \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e, \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e, \u003ca href=\"\/collections\/curated-exterior-stains-deck-finishes\"\u003eexterior stains and deck finishes\u003c\/a\u003e, or plan the job with the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e. See also the \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/exterior-topcoats-stains-oils\/exterior-450-water-based-topcoat\"\u003emanufacturer Exterior 450 page\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53595008303414,"sku":"196-630","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/gal-general-finishes-ext-450-wb-finish-clear-gloss-1502114.jpg?v=1769119939"},{"product_id":"general-finishes-ext-450-water-based-finish-clear-satin-quart","title":"General Finishes Exterior 450 Clear Satin Quart","description":"\u003cp\u003eGeneral Finishes Exterior 450 is a water-based urethane\/acrylic clear topcoat for vertical exterior surfaces such as fences, patio furniture, garage doors, entrance doors, outdoor kitchens and interior windows. It is not recommended as a deck finish. This quart is the Satin sheen.\u003c\/p\u003e\n\u003cp\u003eExterior 450 is fortified with UV absorbers to help protect the finish film, and it includes a built-in mildewcide to slow mold and mildew growth. It works as a clear coat or as an optional topcoat over darker General Finishes Milk Paint colors. Do not use it over light or white paints, because yellowing may occur.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater white in the can, dries clear, and does not amber\u003c\/li\u003e\n\u003cli\u003eSelf-sealing; usable over existing finishes with proper prep\u003c\/li\u003e\n\u003cli\u003eBrush, roll or spray (HVLP tip 1.1-1.3 mm)\u003c\/li\u003e\n\u003cli\u003eSoap and water cleanup for hands; GF Brush and Gun Cleaner for equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen \/ size\u003c\/th\u003e\n\u003ctd\u003eSatin (25-35) \/ 1 quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based urethane\/acrylic blend \/ exterior vertical surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 140-160 sq ft per quart per coat (General Finishes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3 coats; TDS recommends at least 3 total coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes at about 70 F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2+ hours in ideal conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use \/ full cure\u003c\/th\u003e\n\u003ctd\u003e7-10 days \/ 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 125 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eAbout 29% by volume, 30% by weight (Satin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eWater, GF Extender or GF Accelerator per TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eQXS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt 140-160 sq ft per quart per coat, a 3-coat finish from one quart covers roughly 47-53 sq ft. A 2-coat finish covers roughly 70-80 sq ft.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove dust. Freshly stained wood: apply only after the stain is fully dry.\u003c\/li\u003e\n\u003cli\u003ePreviously finished wood: clean with a 50:50 denatured alcohol\/water mix, then sand lightly with a 220-320 grit pad and remove dust. Test adhesion.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly. Apply 2-3 coats out of direct sun. Sand lightly between coats with a fine pad and remove dust.\u003c\/li\u003e\n\u003cli\u003eAllow full cure before heavy weather exposure. Always follow the product label and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-exterior-450-topcoat.pdf?v=1791748626\"\u003eExterior 450 technical data sheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot for decks\u003c\/li\u003e\n\u003cli\u003eThe UV additive protects the finish film; it does not stop wood from changing color in sunlight\u003c\/li\u003e\n\u003cli\u003eDo not use over linseed or Danish oil finishes\u003c\/li\u003e\n\u003cli\u003eTest for adhesion and appearance before starting the full project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this on a deck?\u003c\/strong\u003e No. Exterior 450 is for vertical exterior surfaces, not decks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I topcoat Milk Paint with it?\u003c\/strong\u003e Yes over darker Milk Paint colors. Do not use over light or white paints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before another coat?\u003c\/strong\u003e About 2+ hours in ideal conditions; cool or humid weather can take longer.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/products\/general-finishes-exterior-450-water-based-topcoat-satin-gallon\"\u003eExterior 450 Satin Gallon\u003c\/a\u003e. \u003ca href=\"\/products\/general-finishes-exterior-450-water-based-topcoat-flat-gallon\"\u003eExterior 450 Flat Gallon\u003c\/a\u003e. Shop \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e, \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e, \u003ca href=\"\/collections\/curated-exterior-stains-deck-finishes\"\u003eexterior stains and deck finishes\u003c\/a\u003e, or plan the job with the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e. See also the \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/exterior-topcoats-stains-oils\/exterior-450-water-based-topcoat\"\u003emanufacturer Exterior 450 page\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53595008860470,"sku":"196-623","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/quart-general-finishes-ext-450-wb-finish-clear-satin-2207203.jpg?v=1769119938"},{"product_id":"general-finishes-high-performance-water-based-topcoat-clear-satin-quart","title":"General Finishes High Performance Topcoat, Satin, Quart","description":"\u003ch2\u003eGeneral Finishes High Performance Water-Based Polyurethane Topcoat Clear Satin Quart\u003c\/h2\u003e\n\u003cp\u003eGeneral Finishes High Performance is a water-based polyurethane topcoat for interior cabinets, trim, doors, and furniture. It won Fine Woodworking's \"Best Overall Choice Award,\" where it was voted the hardest, most durable consumer polyurethane topcoat. Brush it, roll it, or spray it. This quart is the Satin sheen.\u003c\/p\u003e\n\u003cp\u003eSatin measures 25 to 35 on the sheen scale. General Finishes notes that Flat, Satin, Semi-Gloss, and Gloss High Performance can be mixed with each other to adjust the sheen, but Dead Flat cannot.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater white in the can, dries clear, and does not amber\u003c\/li\u003e\n\u003cli\u003eUse over raw wood, stain, and non-white painted surfaces\u003c\/li\u003e\n\u003cli\u003eSelf-sealing, and usable over existing finishes with proper prep\u003c\/li\u003e\n\u003cli\u003eSoap and water cleanup for hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: water-based urethane\/acrylic blend, interior only\u003c\/li\u003e\n\u003cli\u003eSheen: Satin (25 to 35 sheen)\u003c\/li\u003e\n\u003cli\u003eSize: 1 quart\u003c\/li\u003e\n\u003cli\u003eCoverage: 125 to 150 sq ft per quart (General Finishes lists 500 to 600 sq ft per gallon)\u003c\/li\u003e\n\u003cli\u003eRecommended coats: 2 to 3\u003c\/li\u003e\n\u003cli\u003eDry to touch: 30+ minutes. Recoat: 2+ hours. Light use: 7 to 10 days. Full cure: 21 days (at 70 degrees F and 50% humidity)\u003c\/li\u003e\n\u003cli\u003eVOC: under 175 g\/L\u003c\/li\u003e\n\u003cli\u003eSolids: 24% by volume, 26% by weight\u003c\/li\u003e\n\u003cli\u003eApply with: synthetic bristle brush, foam brush, pad, roller, or HVLP sprayer (1.1 to 1.3 mm tip)\u003c\/li\u003e\n\u003cli\u003eThin with: distilled water, starting at 5% and up to 10% by volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt 125 to 150 sq ft per quart per coat, a 3-coat finish from one quart covers roughly 40 to 50 sq ft. A 2-coat finish covers roughly 60 to 75 sq ft.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove the dust. Freshly stained wood: do not sand, apply once the stain is dry (let oil-based products dry 72+ hours first).\u003c\/li\u003e\n\u003cli\u003ePreviously finished wood: scuff clean with a non-woven pad and a 50:50 mix of denatured alcohol and water, let dry 1 to 2 hours, then sand lightly with a 220 to 320 grit sponge.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Apply a liberal coat along the grain with smooth, even strokes, avoiding pressure and excess back brushing.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine 220 to 320 grit pad and remove dust. Do not use steel wool. Apply 2 to 3 coats; more than 3 will not improve durability.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral Finishes advises against using any clear coat, including this one, over white or light paints such as GF Milk Paint, because it may cause yellowing\u003c\/li\u003e\n\u003cli\u003eDo not use water-based products with linseed oils or Danish oils\u003c\/li\u003e\n\u003cli\u003eTest for adhesion and appearance before starting the full project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed a larger size or a different sheen? See the \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-gallon\"\u003eClear Satin Gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-pint\"\u003eClear Satin Pint\u003c\/a\u003e, and \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-flat-gallon\"\u003eClear Flat Gallon\u003c\/a\u003e, or shop \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGeneral Finishes High Performance\u003c\/a\u003e, \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e, and the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53595010105654,"sku":"195-867","price":41.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/quart-general-finishes-high-performance-wb-topcoat-clear-satin-5452975.jpg?v=1769119939"},{"product_id":"general-finishes-high-performance-water-based-topcoat-clear-flat-gallon","title":"General Finishes High Performance Topcoat, Flat, Gallon","description":"\u003ch2\u003eGeneral Finishes High Performance Water-Based Polyurethane Topcoat Clear Flat Gallon\u003c\/h2\u003e\n\u003cp\u003eGeneral Finishes High Performance is a water-based polyurethane topcoat for interior cabinets, trim, doors, and furniture. It won Fine Woodworking's \"Best Overall Choice Award,\" where it was voted the hardest, most durable consumer polyurethane topcoat. Brush it, roll it, or spray it. This gallon is the Flat sheen.\u003c\/p\u003e\n\u003cp\u003eFlat gives a low-sheen look with High Performance durability. General Finishes notes that Flat, Satin, Semi-Gloss, and Gloss High Performance can be mixed with each other to adjust the sheen, but Dead Flat cannot.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater white in the can, dries clear, and does not amber\u003c\/li\u003e\n\u003cli\u003eUse over raw wood, stain, and non-white painted surfaces\u003c\/li\u003e\n\u003cli\u003eSelf-sealing, and usable over existing finishes with proper prep\u003c\/li\u003e\n\u003cli\u003eSoap and water cleanup for hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: water-based urethane\/acrylic blend, interior only\u003c\/li\u003e\n\u003cli\u003eSheen: Flat (10 or less)\u003c\/li\u003e\n\u003cli\u003eSize: 1 gallon\u003c\/li\u003e\n\u003cli\u003eCoverage: 500 to 600 sq ft per gallon\u003c\/li\u003e\n\u003cli\u003eRecommended coats: 2 to 3\u003c\/li\u003e\n\u003cli\u003eDry to touch: 30+ minutes. Recoat: 2+ hours. Light use: 7 to 10 days. Full cure: 21 days (at 70 degrees F and 50% humidity)\u003c\/li\u003e\n\u003cli\u003eVOC: under 175 g\/L\u003c\/li\u003e\n\u003cli\u003eSolids: 27% by volume, 29% by weight\u003c\/li\u003e\n\u003cli\u003eApply with: synthetic bristle brush, foam brush, pad, roller, or HVLP sprayer (1.1 to 1.3 mm tip)\u003c\/li\u003e\n\u003cli\u003eThin with: distilled water, starting at 5% and up to 10% by volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt 500 to 600 sq ft per gallon per coat, a 3-coat finish from one gallon covers roughly 165 to 200 sq ft. A 2-coat finish covers roughly 250 to 300 sq ft.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove the dust. Freshly stained wood: do not sand, apply once the stain is dry (let oil-based products dry 72+ hours first).\u003c\/li\u003e\n\u003cli\u003ePreviously finished wood: scuff clean with a non-woven pad and a 50:50 mix of denatured alcohol and water, let dry 1 to 2 hours, then sand lightly with a 220 to 320 grit sponge.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Apply a liberal coat along the grain with smooth, even strokes, avoiding pressure and excess back brushing.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine 220 to 320 grit pad and remove dust. Do not use steel wool. Apply 2 to 3 coats; more than 3 will not improve durability.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral Finishes advises against using any clear coat, including this one, over white or light paints such as GF Milk Paint, because it may cause yellowing\u003c\/li\u003e\n\u003cli\u003eDo not use water-based products with linseed oils or Danish oils\u003c\/li\u003e\n\u003cli\u003eTest for adhesion and appearance before starting the full project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWant a different sheen? See the \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-gallon\"\u003eClear Satin Gallon\u003c\/a\u003e and \u003ca href=\"\/products\/general-finishes-high-performance-wb-finish-clear-dead-flat-gallon\"\u003eDead Flat Gallon\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e and the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee every sheen and size of \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGeneral Finishes High Performance topcoat\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53595011121462,"sku":"196-590","price":107.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/gal-general-finishes-high-performance-wb-topcoat-clear-flat-8911461.jpg?v=1769119938"},{"product_id":"general-finishes-high-performance-water-based-topcoat-clear-satin-pint","title":"General Finishes High Performance Topcoat, Satin, Pint","description":"\u003cp\u003eGeneral Finishes High Performance is a water-based polyurethane topcoat for interior cabinets, trim, doors and furniture. It won Fine Woodworking's \"Best Overall Choice Award,\" where it was voted the hardest, most durable consumer polyurethane topcoat. Brush it, roll it or spray it. This pint is the Satin sheen, a handy size for a small piece, a set of shelves or touch-ups.\u003c\/p\u003e\n\u003cp\u003eSatin measures 25 to 35 on the sheen scale. General Finishes notes that Flat, Satin, Semi-Gloss and Gloss High Performance can be mixed with each other to adjust the sheen, but Dead Flat cannot.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater white in the can, dries clear and does not amber\u003c\/li\u003e\n\u003cli\u003eUse over raw wood, stain and non-white painted surfaces\u003c\/li\u003e\n\u003cli\u003eSelf-sealing, and usable over existing finishes with proper prep\u003c\/li\u003e\n\u003cli\u003eSoap and water cleanup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based urethane\/acrylic blend, interior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen \/ size\u003c\/th\u003e\n\u003ctd\u003eSatin (25 to 35) \/ 1 pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 62-75 sq ft per pint (General Finishes lists 500-600 sq ft per gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2 to 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times\u003c\/th\u003e\n\u003ctd\u003eTouch 30+ minutes, recoat 2+ hours, light use 7-10 days, full cure 21 days (70 F, 50% humidity)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 175 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e24% by volume, 26% by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle or foam brush, pad, roller, or HVLP sprayer (1.1 to 1.3 mm tip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eDistilled water, starting at 5% and up to 10% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003ePTHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt about 62-75 sq ft per pint per coat, a 3-coat finish from one pint covers roughly 20-25 sq ft, and a 2-coat finish roughly 31-37 sq ft. For a dresser, a tabletop or several cabinet doors, step up to the \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eClear Satin Quart\u003c\/a\u003e or the \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-gallon\"\u003eClear Satin Gallon\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove the dust. Freshly stained wood: do not sand; apply once the stain is dry (let oil-based stains dry 72+ hours first).\u003c\/li\u003e\n\u003cli\u003ePreviously finished wood: scuff clean with a non-woven pad and a 50:50 mix of denatured alcohol and water, let dry 1 to 2 hours, then sand lightly with a 220 to 320 grit sponge.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Apply a liberal coat along the grain with smooth, even strokes, avoiding pressure and excess back brushing.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine 220 to 320 grit pad and remove dust. Do not use steel wool. Apply 2 to 3 coats; more than 3 will not improve durability.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral Finishes advises against using any clear coat, including this one, over white or light paints such as GF Milk Paint, because it may cause yellowing\u003c\/li\u003e\n\u003cli\u003eDo not use water-based products with linseed oils or Danish oils\u003c\/li\u003e\n\u003cli\u003eTest for adhesion and appearance before starting the full project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eNeed a different sheen? See the \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-flat-gallon\"\u003eClear Flat Gallon\u003c\/a\u003e or shop all of \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGeneral Finishes High Performance\u003c\/a\u003e. Stain first with \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e, browse \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e, or plan the job with the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e or the \u003ca href=\"\/pages\/paint-cabinets-project-cart\"\u003ecabinet project cart\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53595011776822,"sku":"196-592","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/pint-general-finishes-high-performance-wb-topcoat-clear-satin-8967523.jpg?v=1769119938"},{"product_id":"general-finishes-high-performance-water-based-topcoat-clear-satin-gallon","title":"General Finishes High Performance Topcoat, Satin, Gallon","description":"\u003ch2\u003eGeneral Finishes High Performance Water-Based Polyurethane Topcoat Clear Satin Gallon\u003c\/h2\u003e\n\u003cp\u003eGeneral Finishes High Performance is a water-based polyurethane topcoat for interior cabinets, trim, doors, and furniture. It won Fine Woodworking's \"Best Overall Choice Award,\" where it was voted the hardest, most durable consumer polyurethane topcoat. Brush it, roll it, or spray it. This gallon is the Satin sheen.\u003c\/p\u003e\n\u003cp\u003eSatin measures 25 to 35 on the sheen scale. General Finishes notes that Flat, Satin, Semi-Gloss, and Gloss High Performance can be mixed with each other to adjust the sheen, but Dead Flat cannot.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater white in the can, dries clear, and does not amber\u003c\/li\u003e\n\u003cli\u003eUse over raw wood, stain, and non-white painted surfaces\u003c\/li\u003e\n\u003cli\u003eSelf-sealing, and usable over existing finishes with proper prep\u003c\/li\u003e\n\u003cli\u003eSoap and water cleanup for hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: water-based urethane\/acrylic blend, interior only\u003c\/li\u003e\n\u003cli\u003eSheen: Satin (25 to 35 sheen)\u003c\/li\u003e\n\u003cli\u003eSize: 1 gallon\u003c\/li\u003e\n\u003cli\u003eCoverage: 500 to 600 sq ft per gallon\u003c\/li\u003e\n\u003cli\u003eRecommended coats: 2 to 3\u003c\/li\u003e\n\u003cli\u003eDry to touch: 30+ minutes. Recoat: 2+ hours. Light use: 7 to 10 days. Full cure: 21 days (at 70 degrees F and 50% humidity)\u003c\/li\u003e\n\u003cli\u003eVOC: under 175 g\/L\u003c\/li\u003e\n\u003cli\u003eSolids: 24% by volume, 26% by weight\u003c\/li\u003e\n\u003cli\u003eApply with: synthetic bristle brush, foam brush, pad, roller, or HVLP sprayer (1.1 to 1.3 mm tip)\u003c\/li\u003e\n\u003cli\u003eThin with: distilled water, starting at 5% and up to 10% by volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt 500 to 600 sq ft per gallon per coat, a 3-coat finish from one gallon covers roughly 165 to 200 sq ft. A 2-coat finish covers roughly 250 to 300 sq ft.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove the dust. Freshly stained wood: do not sand, apply once the stain is dry (let oil-based products dry 72+ hours first).\u003c\/li\u003e\n\u003cli\u003ePreviously finished wood: scuff clean with a non-woven pad and a 50:50 mix of denatured alcohol and water, let dry 1 to 2 hours, then sand lightly with a 220 to 320 grit sponge.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Apply a liberal coat along the grain with smooth, even strokes, avoiding pressure and excess back brushing.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine 220 to 320 grit pad and remove dust. Do not use steel wool. Apply 2 to 3 coats; more than 3 will not improve durability.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral Finishes advises against using any clear coat, including this one, over white or light paints such as GF Milk Paint, because it may cause yellowing\u003c\/li\u003e\n\u003cli\u003eDo not use water-based products with linseed oils or Danish oils\u003c\/li\u003e\n\u003cli\u003eTest for adhesion and appearance before starting the full project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed a smaller size or a different sheen? See the \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eClear Satin Quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-pint\"\u003eClear Satin Pint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-flat-gallon\"\u003eClear Flat Gallon\u003c\/a\u003e, and \u003ca href=\"\/products\/general-finishes-high-performance-wb-finish-clear-dead-flat-gallon\"\u003eDead Flat Gallon\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e and the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee every sheen and size of \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGeneral Finishes High Performance topcoat\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53595011809590,"sku":"196-594","price":107.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/gal-general-finishes-high-performance-wb-topcoat-clear-satin-9026796.jpg?v=1769119938"},{"product_id":"spray-minwax-wood-finish-red-oak-215a-297077","title":"Minwax Spray Wood Finish Red Oak 12 oz","description":"\u003ch2\u003eMinwax Spray Wood Finish Red Oak 12 oz\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProduct fit:\u003c\/strong\u003e The rich, classic penetrating stain in the familiar yellow can. Used to enhance any interior bare or stripped wood surface.\u003c\/p\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOil-Based Wood Stain projects where the product label matches your surface and finish plan\u003c\/li\u003e\n  \u003cli\u003eDIY shoppers who want the right supply in the cart before the work starts\u003c\/li\u003e\n  \u003cli\u003eWeekend projects that need clear details, fewer guesses, and a smoother path to done\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe rich, classic penetrating stain in the familiar yellow can\u003c\/li\u003e\n  \u003cli\u003eUsed to enhance any interior bare or stripped wood surface.\u003c\/li\u003e\n  \u003cli\u003eWood Finish 32150 Oil Based Wood Stain, 12 oz Aerosol Can, 215 Red Oak, 500 sq-ft\/gal Coverage, 102 deg F Flash\u003c\/li\u003e\n  \u003cli\u003eMinwax Wood Finish 250 VOC Compliant is an oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain\u003c\/li\u003e\n  \u003cli\u003eIt applies easily and penetrates deep into the pores of the wood\u003c\/li\u003e\n  \u003cli\u003eIs color matched to the standards of the traditional Wood Finish line so that your finished results are the same, beautiful, consistent color that you are used to\u003c\/li\u003e\n  \u003cli\u003eUsed to enhance any interior bare or stripped wood surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWeekend tips\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eClean the surface first and give wood enough dry time before stain or topcoat.\u003c\/li\u003e\n  \u003cli\u003eTest color and finish on a small area before committing to the full piece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuild the cart around the prep, application, and cleanup steps so you can conquer the weekend with fewer store runs.\u003c\/p\u003e\n\u003cp\u003eBuild the rest of your project cart with \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":53621233221942,"sku":"297-077","price":15.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426321502_72b140db-6600-48e0-b974-d4e6031a524b.jpg?v=1769750529"},{"product_id":"spray-minwax-wood-finish-red-mahogany-225a-297101","title":"Minwax Wood Finish Spray Stain Red Mahogany 225, 11.5 oz","description":"\u003cp\u003eMinwax Wood Finish in Red Mahogany (225) in an aerosol spray can delivers the color of traditional Minwax Wood Finish, the classic oil-based penetrating stain, without a brush. It is semi-transparent, enhances the natural wood grain, and is color matched to the standard Wood Finish line so results match the can stain you know. Use it on interior bare or stripped wood: unfinished furniture, doors, trim, molding and other hard-to-reach surfaces.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-based penetrating stain in a convenient spray\u003c\/li\u003e\n\u003cli\u003ePenetrates the wood within 5 to 15 minutes of application\u003c\/li\u003e\n\u003cli\u003eIdeal for unfinished furniture, doors, trim, molding and detailed pieces\u003c\/li\u003e\n\u003cli\u003eAdd another coat after 4 to 6 hours for a richer color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eRed Mahogany 225\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e11.5 oz aerosol can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based penetrating wood stain, semi-transparent, interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse on\u003c\/th\u003e\n\u003ctd\u003eBare or stripped interior wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePenetration time\u003c\/th\u003e\n\u003ctd\u003e5-15 minutes, then wipe off excess\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e4-6 hours for a deeper color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e32250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove all old finish, sand with the grain and remove the dust. On soft or porous woods such as pine, a pre-stain wood conditioner helps reduce blotching.\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Follow the can label for shaking and spray distance, and spray in even, overlapping passes in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eLet it penetrate 5-15 minutes, then wipe off the excess with a clean cloth along the grain. For a darker color, apply another coat after 4-6 hours.\u003c\/li\u003e\n\u003cli\u003eProtect the stained wood with a clear topcoat, such as a Minwax polyurethane or Polycrylic, once the stain is dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor interior wood only. Rags soaked with oil-based stain can catch fire on their own: place them in a sealed, water-filled metal container and dispose of them under local fire rules. Read the can label and use adequate ventilation.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eAlso in spray: \u003ca href=\"\/products\/spray-minwax-wood-finish-early-american-230a-297135\"\u003eEarly American 230\u003c\/a\u003e. See all \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax stains and finishes\u003c\/a\u003e and the \u003ca href=\"\/pages\/minwax-wood-stains-finishes\"\u003eMinwax guide\u003c\/a\u003e, compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e, pick a clear coat from \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e, or plan the job with the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":53621233975606,"sku":"297-101","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426322509_b1d9c1e0-ac5d-4bc0-9ce6-5915d826c285.jpg?v=1769750530"},{"product_id":"spray-minwax-wood-finish-early-american-230a-297135","title":"Minwax Wood Finish Spray Stain Early American 230, 11.5 oz","description":"\u003cp\u003eMinwax Wood Finish in Early American (230) in an aerosol spray can delivers the color of traditional Minwax Wood Finish, the classic oil-based penetrating stain, without a brush. It is semi-transparent, enhances the natural wood grain, and is color matched to the standard Wood Finish line so results match the can stain you know. Use it on interior bare or stripped wood: unfinished furniture, doors, trim, molding and other hard-to-reach surfaces.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-based penetrating stain in a convenient spray\u003c\/li\u003e\n\u003cli\u003ePenetrates the wood within 5 to 15 minutes of application\u003c\/li\u003e\n\u003cli\u003eIdeal for unfinished furniture, doors, trim, molding and detailed pieces\u003c\/li\u003e\n\u003cli\u003eAdd another coat after 4 to 6 hours for a richer color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eEarly American 230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e11.5 oz aerosol can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based penetrating wood stain, semi-transparent, interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse on\u003c\/th\u003e\n\u003ctd\u003eBare or stripped interior wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePenetration time\u003c\/th\u003e\n\u003ctd\u003e5-15 minutes, then wipe off excess\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e4-6 hours for a deeper color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e32300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove all old finish, sand with the grain and remove the dust. On soft or porous woods such as pine, a pre-stain wood conditioner helps reduce blotching.\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Follow the can label for shaking and spray distance, and spray in even, overlapping passes in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eLet it penetrate 5-15 minutes, then wipe off the excess with a clean cloth along the grain. For a darker color, apply another coat after 4-6 hours.\u003c\/li\u003e\n\u003cli\u003eProtect the stained wood with a clear topcoat, such as a Minwax polyurethane or Polycrylic, once the stain is dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor interior wood only. Rags soaked with oil-based stain can catch fire on their own: place them in a sealed, water-filled metal container and dispose of them under local fire rules. Read the can label and use adequate ventilation.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eAlso in spray: \u003ca href=\"\/products\/spray-minwax-wood-finish-red-mahogany-225a-297101\"\u003eRed Mahogany 225\u003c\/a\u003e. See all \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax stains and finishes\u003c\/a\u003e and the \u003ca href=\"\/pages\/minwax-wood-stains-finishes\"\u003eMinwax guide\u003c\/a\u003e, compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e, pick a clear coat from \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e, or plan the job with the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":53621234073910,"sku":"297-135","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426323001_1ef5b599-c57e-41bb-bb67-bc0bc328fd92.jpg?v=1769750531"},{"product_id":"minwax-wood-finish-jacobean-quart","title":"Minwax Wood Finish Jacobean Quart","description":"\u003cp\u003eMinwax Wood Finish in Jacobean is a penetrating oil-based wood stain that brings out the grain with rich color in one coat. Minwax rates it for unfinished interior wood: furniture, cabinets, doors, trim, molding and hardwood floors. It is for interior projects only. At the Minwax rating, a quart covers about 100 to 125 sq ft per coat.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePenetrating oil-based stain; one-coat color\u003c\/li\u003e\n\u003cli\u003eThe longer you wait to wipe, the darker and richer the color\u003c\/li\u003e\n\u003cli\u003eRecoat after 2 hours for a deeper color; do not sand between coats\u003c\/li\u003e\n\u003cli\u003eFinish with a clear topcoat such as Minwax Fast-Drying Polyurethane or Polycrylic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eJacobean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eQuart (32 fl oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 100 to 125 sq ft per quart (Minwax rates 400 to 500 sq ft per gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time (77 F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch dry in 2 hours; recoat after 2 hours to deepen color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; stir, do not shake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e70014 (UPC 027426700147)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStart with clean, dry bare or stripped wood. Sand with 220 grit in the direction of the grain and remove the dust.\u003c\/li\u003e\n\u003cli\u003eOn softwoods such as pine, apply \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e first for more even color.\u003c\/li\u003e\n\u003cli\u003eStir well and test the color on a hidden spot of the same wood.\u003c\/li\u003e\n\u003cli\u003eBrush or wipe on, then wipe off the excess with the grain. Wait longer before wiping for a darker color.\u003c\/li\u003e\n\u003cli\u003eFor a deeper color, recoat after 2 hours. When you like the color, let it dry completely, then topcoat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFlammable: oil-soaked rags can catch fire on their own if not disposed of properly; follow the can label and SDS. Do not pour unused stain down the drain. Read the \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/stains\/wood-finish\" target=\"_blank\" rel=\"noopener\"\u003eMinwax Wood Finish product page\u003c\/a\u003e for color charts and sheets.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSee every color and size in \u003ca href=\"\/collections\/minwax-wood-finish-stain\"\u003eMinwax Wood Finish stain\u003c\/a\u003e, protect it with \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e or \u003ca href=\"\/collections\/spray-polyurethane\"\u003eclear spray finishes\u003c\/a\u003e, and shop the full \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax line\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Minwax","offers":[{"title":"Default Title","offer_id":53621236171062,"sku":"298-166","price":25.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426700147_98fd574d-44a4-40fa-b51f-09cd5a88ad0d.jpg?v=1769750561"},{"product_id":"general-finishes-high-performance-water-based-topcoat-semi-gloss-pint","title":"General Finishes High Performance Topcoat, Semi-Gloss, Pint","description":"\u003ch2\u003eGeneral Finishes High Performance Water-Based Topcoat, Semi-Gloss Pint\u003c\/h2\u003e\n\u003cp\u003eGeneral Finishes High Performance Water-Based Topcoat, Semi-Gloss Pint is a practical protective topcoat for protecting painted, stained, or refinished surfaces. It is a practical choice when you want the right supply in the cart, a clear next step, and a little more confidence before the weekend starts.\u003c\/p\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eprotecting painted, stained, or refinished surfaces\u003c\/li\u003e\n  \u003cli\u003eadding durability after the fun color work is done\u003c\/li\u003e\n  \u003cli\u003eprojects that need a cleaner finish and a better chance of lasting\u003c\/li\u003e\n  \u003cli\u003eAdding the right protective topcoat before a project stalls halfway through\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy it helps you conquer the weekend\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFits naturally into topcoat projects without overcomplicating the plan\u003c\/li\u003e\n  \u003cli\u003ePairs well with the prep, application, and cleanup supplies shoppers usually need next\u003c\/li\u003e\n  \u003cli\u003eKeeps the choice simple so you can spend more time doing and less time second guessing\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003ch3\u003eProject tips\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the product label before use for surface prep, application method, dry time, and safety details\u003c\/li\u003e\n  \u003cli\u003ePrep the surface first so the finish, repair, or application has a better chance to perform\u003c\/li\u003e\n  \u003cli\u003eTest color, sheen, fit, or adhesion on a small area when the final look matters\u003c\/li\u003e\n  \u003cli\u003eAdd any needed tape, sandpaper, brushes, rollers, or topcoat now so the weekend keeps moving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePair it with related supplies from \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eProject Weekend DIY\u003c\/a\u003e so you can prep, apply, protect, and clean up with fewer surprises.\u003c\/p\u003e\n\u003cp\u003eSee every sheen and size of \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGeneral Finishes High Performance topcoat\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53783342776630,"sku":"196-596","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016105236.jpg?v=1773708255"},{"product_id":"general-finishes-high-performance-wb-finish-clear-dead-flat-gallon","title":"General Finishes High Performance Topcoat, Dead Flat, Gallon","description":"\u003ch2\u003eGeneral Finishes High Performance Water-Based Polyurethane Topcoat Dead Flat Gallon\u003c\/h2\u003e\n\u003cp\u003eGeneral Finishes High Performance is a water-based polyurethane topcoat for interior cabinets, trim, doors, and furniture. It won Fine Woodworking's \"Best Overall Choice Award,\" where it was voted the hardest, most durable consumer polyurethane topcoat. Brush it, roll it, or spray it. This gallon is the Dead Flat sheen.\u003c\/p\u003e\n\u003cp\u003eDead Flat is the flattest High Performance sheen. It is formulated with renewable resources and a patented polymer technology, and delivers a sheen under 5 degrees with high water resistance and very high chemical resistance. Because it uses a different polymer, Dead Flat cannot be mixed with the other High Performance sheens.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater white in the can, dries clear, and does not amber\u003c\/li\u003e\n\u003cli\u003eUse over raw wood, stain, and non-white painted surfaces\u003c\/li\u003e\n\u003cli\u003eSelf-sealing, and usable over existing finishes with proper prep\u003c\/li\u003e\n\u003cli\u003eSoap and water cleanup for hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: water-based urethane\/acrylic blend, interior only\u003c\/li\u003e\n\u003cli\u003eSheen: Dead Flat (under 5)\u003c\/li\u003e\n\u003cli\u003eSize: 1 gallon\u003c\/li\u003e\n\u003cli\u003eCoverage: 500 to 600 sq ft per gallon\u003c\/li\u003e\n\u003cli\u003eRecommended coats: 2 to 3\u003c\/li\u003e\n\u003cli\u003eDry to touch: 30+ minutes. Recoat: 2+ hours. Light use: 7 to 10 days. Full cure: 21 days (at 70 degrees F and 50% humidity)\u003c\/li\u003e\n\u003cli\u003eVOC: under 225 g\/L\u003c\/li\u003e\n\u003cli\u003eSolids: 36% by volume, 34% by weight\u003c\/li\u003e\n\u003cli\u003eApply with: synthetic bristle brush, foam brush, pad, roller, or HVLP sprayer (1.1 to 1.3 mm tip)\u003c\/li\u003e\n\u003cli\u003eThin with: distilled water, starting at 5% and up to 10% by volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt 500 to 600 sq ft per gallon per coat, a 3-coat finish from one gallon covers roughly 165 to 200 sq ft. A 2-coat finish covers roughly 250 to 300 sq ft.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove the dust. Freshly stained wood: do not sand, apply once the stain is dry (let oil-based products dry 72+ hours first).\u003c\/li\u003e\n\u003cli\u003ePreviously finished wood: scuff clean with a non-woven pad and a 50:50 mix of denatured alcohol and water, let dry 1 to 2 hours, then sand lightly with a 220 to 320 grit sponge.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Apply a liberal coat along the grain with smooth, even strokes, avoiding pressure and excess back brushing.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine 220 to 320 grit pad and remove dust. Do not use steel wool. Apply 2 to 3 coats; more than 3 will not improve durability.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral Finishes advises against using any clear coat, including this one, over white or light paints such as GF Milk Paint, because it may cause yellowing\u003c\/li\u003e\n\u003cli\u003eDo not use water-based products with linseed oils or Danish oils\u003c\/li\u003e\n\u003cli\u003eTest for adhesion and appearance before starting the full project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWant a little more sheen? See the \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-flat-gallon\"\u003eClear Flat Gallon\u003c\/a\u003e and \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-gallon\"\u003eClear Satin Gallon\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e and the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee every sheen and size of \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGeneral Finishes High Performance topcoat\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53904600990006,"sku":"195-882","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/gfhsdf-1.jpg?v=1776398039"},{"product_id":"general-finishes-enduro-2k-polyurethane-clear-satin-gallon","title":"General Finishes Enduro 2K Polyurethane Clear Satin Gallon","description":"\u003cp\u003eGeneral Finishes Enduro Tintable 2K Clear Poly is a 2-component, water-based urethane\/acrylic blend for professional spray finishing. You mix in Enduro NCO Catalyst (GF product code A152) before use, and the cured film gives high chemical and water resistance. General Finishes rates it for interior or exterior work on cabinets, trim, doors, furniture, table tops and bar tops, over raw or stained wood, non-white painted surfaces, fiberglass and pre-primed steel. It can be tinted with zero-VOC colorants. This is the satin sheen (GF code B788) in a gallon. Specs below are from the General Finishes Tintable 2K Clear Poly technical data sheet (2022-11, posted 2025-07).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003e2-component, water-based urethane\/acrylic blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin (30); also made in flat, semi-gloss and gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalyst\u003c\/th\u003e\n\u003ctd\u003eEnduro NCO Catalyst A152 at 10% by volume: 12.8 oz per gallon, 3.2 oz per quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eAbout 4 hours once mixed (varies with colorant dosage)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eSpray only: HVLP 1.1-1.3 mm; air-assist airless 375 PSI pump, 20 PSI air, .011-.013 in tip; airless fine finish .007-.011 in tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness\u003c\/th\u003e\n\u003ctd\u003e3-5 wet mils per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAverage coverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft per gallon (varies with mil thickness, applicator and technique)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time (70 F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 30 minutes; recoat 30 minutes to 2 hours, based on heat and airflow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCure\u003c\/th\u003e\n\u003ctd\u003e5 days at 70 F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e28% by volume, 29% by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L; complies with SCAQMD, CARB, Canada, OTC Phase I and II\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eWater or Enduro Extender (up to 15% for more open time, where local rules allow)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eHands with soap and water; equipment with GF Brush and Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e50-140 F, tightly sealed; keep from freezing; best used within one year of the can date\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrep: surfaces must be clean of contaminants and dust. Sand raw wood no finer than 220 grit. Clean pre-finished or sealed surfaces with a 50\/50 mix of denatured alcohol and water on a maroon non-woven pad. Fiberglass and pre-primed steel need proper prep and priming; always test first.\u003c\/li\u003e\n\u003cli\u003eMix the finish thoroughly to reincorporate solids. Slowly add 10% Enduro NCO Catalyst by volume while mixing for 2-3 minutes with a power drill.\u003c\/li\u003e\n\u003cli\u003eLet the mix rest 15 minutes, then strain through a fine-mesh filter. Mix only what you can spray in about 4 hours.\u003c\/li\u003e\n\u003cli\u003eSpray 3-5 wet mils per coat. It can be used without a sealer; GF suggests 1-2 coats of Enduro Sanding Sealer for more build, and 3-4 total coats of finish.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine 220-320 grit foam pad or a gray non-woven pad.\u003c\/li\u003e\n\u003cli\u003eIdeal conditions are 70 F, 50% humidity and out of direct sunlight. Allow 5 days to cure before heavy use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eCan I brush or roll 2K Clear Poly?\u003c\/h4\u003e\n\u003cp\u003eNo. General Finishes lists it as spray only, with HVLP, air-assist airless or airless equipment.\u003c\/p\u003e\n\u003ch4\u003eDo I have to use the catalyst?\u003c\/h4\u003e\n\u003cp\u003eYes. It is a 2-component finish: add Enduro NCO Catalyst at 10% by volume (12.8 oz per gallon). Once mixed, it hardens in about 4 hours, so mix only what you need.\u003c\/p\u003e\n\u003ch4\u003eCan it be tinted?\u003c\/h4\u003e\n\u003cp\u003eYes. GF recommends Colourfal zero-VOC colorants; other colorant systems should be zero VOC and tested thoroughly. When tinted and applied over a sealed surface, GF says to prime with Enduro White Undercoat or Enduro Stain Blocker.\u003c\/p\u003e\n\u003ch4\u003eIs it rated for outdoor use?\u003c\/h4\u003e\n\u003cp\u003eGeneral Finishes lists interior or exterior application. It also says all exterior-rated wood, composites, plywoods, veneered panels and engineered substrates must be tested by the user for compatibility.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/products\/general-finishes-enduro-white-undercoat-sanding-sealer-gallon\"\u003eEnduro White Undercoat\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-extender-clear-pint\"\u003eEnduro Extender\u003c\/a\u003e, more \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53904601219382,"sku":"197-401","price":200.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121632_1_0124.jpg?v=1776394853"},{"product_id":"general-finishes-exterior-450-water-based-topcoat-flat-gallon","title":"General Finishes Exterior 450 Clear Flat Gallon","description":"\u003cp\u003eGeneral Finishes Exterior 450 is a water-based urethane\/acrylic clear topcoat for vertical exterior surfaces such as fences, patio furniture, garage doors, entrance doors, outdoor kitchens and interior windows. It is not recommended as a deck finish. This gallon is the Flat sheen.\u003c\/p\u003e\n\u003cp\u003eExterior 450 is fortified with UV absorbers to help protect the finish film, and it includes a built-in mildewcide to slow mold and mildew growth. It works as a clear coat or as an optional topcoat over darker General Finishes Milk Paint colors. Do not use it over light or white paints, because yellowing may occur.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater white in the can, dries clear, and does not amber\u003c\/li\u003e\n\u003cli\u003eSelf-sealing; usable over existing finishes with proper prep\u003c\/li\u003e\n\u003cli\u003eBrush, roll or spray (HVLP tip 1.1-1.3 mm)\u003c\/li\u003e\n\u003cli\u003eSoap and water cleanup for hands; GF Brush and Gun Cleaner for equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen \/ size\u003c\/th\u003e\n\u003ctd\u003eFlat (10 or less) \/ 1 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based urethane\/acrylic blend \/ exterior vertical surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 560-640 sq ft per gallon per coat (General Finishes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3 coats; TDS recommends at least 3 total coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes at about 70 F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2+ hours in ideal conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use \/ full cure\u003c\/th\u003e\n\u003ctd\u003e7-10 days \/ 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 125 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eAbout 31% by volume, 32% by weight (Flat)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eWater, GF Extender or GF Accelerator per TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eGXF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt 560-640 sq ft per gallon per coat, a 3-coat finish from one gallon covers roughly 185-210 sq ft. A 2-coat finish covers roughly 280-320 sq ft.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove dust. Freshly stained wood: apply only after the stain is fully dry.\u003c\/li\u003e\n\u003cli\u003ePreviously finished wood: clean with a 50:50 denatured alcohol\/water mix, then sand lightly with a 220-320 grit pad and remove dust. Test adhesion.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly. Apply 2-3 coats out of direct sun. Sand lightly between coats with a fine pad and remove dust.\u003c\/li\u003e\n\u003cli\u003eAllow full cure before heavy weather exposure. Always follow the product label and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-exterior-450-topcoat.pdf?v=1791748626\"\u003eExterior 450 technical data sheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot for decks\u003c\/li\u003e\n\u003cli\u003eThe UV additive protects the finish film; it does not stop wood from changing color in sunlight\u003c\/li\u003e\n\u003cli\u003eDo not use over linseed or Danish oil finishes\u003c\/li\u003e\n\u003cli\u003eTest for adhesion and appearance before starting the full project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this on a deck?\u003c\/strong\u003e No. Exterior 450 is for vertical exterior surfaces, not decks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I topcoat Milk Paint with it?\u003c\/strong\u003e Yes over darker Milk Paint colors. Do not use over light or white paints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before another coat?\u003c\/strong\u003e About 2+ hours in ideal conditions; cool or humid weather can take longer.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/products\/general-finishes-exterior-450-topcoat-clear-flat-quart\"\u003eExterior 450 Flat Quart\u003c\/a\u003e. \u003ca href=\"\/products\/general-finishes-exterior-450-water-based-topcoat-satin-gallon\"\u003eExterior 450 Satin Gallon\u003c\/a\u003e. Shop \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e, \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e, \u003ca href=\"\/collections\/curated-exterior-stains-deck-finishes\"\u003eexterior stains and deck finishes\u003c\/a\u003e, or plan the job with the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e. See also the \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/exterior-topcoats-stains-oils\/exterior-450-water-based-topcoat\"\u003emanufacturer Exterior 450 page\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53905271619894,"sku":"196-621","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016107698.jpg?v=1776394886"},{"product_id":"general-finishes-exterior-450-water-based-topcoat-satin-gallon","title":"General Finishes Exterior 450 Clear Satin Gallon","description":"\u003cp\u003eGeneral Finishes Exterior 450 is a water-based urethane\/acrylic clear topcoat for vertical exterior surfaces such as fences, patio furniture, garage doors, entrance doors, outdoor kitchens and interior windows. It is not recommended as a deck finish. This gallon is the Satin sheen.\u003c\/p\u003e\n\u003cp\u003eExterior 450 is fortified with UV absorbers to help protect the finish film, and it includes a built-in mildewcide to slow mold and mildew growth. It works as a clear coat or as an optional topcoat over darker General Finishes Milk Paint colors. Do not use it over light or white paints, because yellowing may occur.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater white in the can, dries clear, and does not amber\u003c\/li\u003e\n\u003cli\u003eSelf-sealing; usable over existing finishes with proper prep\u003c\/li\u003e\n\u003cli\u003eBrush, roll or spray (HVLP tip 1.1-1.3 mm)\u003c\/li\u003e\n\u003cli\u003eSoap and water cleanup for hands; GF Brush and Gun Cleaner for equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen \/ size\u003c\/th\u003e\n\u003ctd\u003eSatin (25-35) \/ 1 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based urethane\/acrylic blend \/ exterior vertical surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 560-640 sq ft per gallon per coat (General Finishes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3 coats; TDS recommends at least 3 total coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes at about 70 F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2+ hours in ideal conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use \/ full cure\u003c\/th\u003e\n\u003ctd\u003e7-10 days \/ 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 125 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eAbout 29% by volume, 30% by weight (Satin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eWater, GF Extender or GF Accelerator per TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eGXS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow much do I need?\u003c\/h3\u003e\n\u003cp\u003eAt 560-640 sq ft per gallon per coat, a 3-coat finish from one gallon covers roughly 185-210 sq ft. A 2-coat finish covers roughly 280-320 sq ft.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove dust. Freshly stained wood: apply only after the stain is fully dry.\u003c\/li\u003e\n\u003cli\u003ePreviously finished wood: clean with a 50:50 denatured alcohol\/water mix, then sand lightly with a 220-320 grit pad and remove dust. Test adhesion.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly. Apply 2-3 coats out of direct sun. Sand lightly between coats with a fine pad and remove dust.\u003c\/li\u003e\n\u003cli\u003eAllow full cure before heavy weather exposure. Always follow the product label and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-exterior-450-topcoat.pdf?v=1791748626\"\u003eExterior 450 technical data sheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot for decks\u003c\/li\u003e\n\u003cli\u003eThe UV additive protects the finish film; it does not stop wood from changing color in sunlight\u003c\/li\u003e\n\u003cli\u003eDo not use over linseed or Danish oil finishes\u003c\/li\u003e\n\u003cli\u003eTest for adhesion and appearance before starting the full project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this on a deck?\u003c\/strong\u003e No. Exterior 450 is for vertical exterior surfaces, not decks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I topcoat Milk Paint with it?\u003c\/strong\u003e Yes over darker Milk Paint colors. Do not use over light or white paints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before another coat?\u003c\/strong\u003e About 2+ hours in ideal conditions; cool or humid weather can take longer.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/products\/general-finishes-ext-450-water-based-finish-clear-satin-quart\"\u003eExterior 450 Satin Quart\u003c\/a\u003e. \u003ca href=\"\/products\/general-finishes-exterior-450-water-based-topcoat-flat-gallon\"\u003eExterior 450 Flat Gallon\u003c\/a\u003e. Shop \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e, \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e, \u003ca href=\"\/collections\/curated-exterior-stains-deck-finishes\"\u003eexterior stains and deck finishes\u003c\/a\u003e, or plan the job with the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing project cart\u003c\/a\u003e. See also the \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/exterior-topcoats-stains-oils\/exterior-450-water-based-topcoat\"\u003emanufacturer Exterior 450 page\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53905271718198,"sku":"196-624","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016107544.jpg?v=1776394892"},{"product_id":"general-finishes-enduro-white-undercoat-sanding-sealer-gallon","title":"General Finishes Enduro White Undercoat Sanding Sealer Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro Water-Based White Undercoat, Gallon\u003c\/strong\u003e is a high-build, water-based acrylic primer for white and off-white wood finishes. General Finishes describes it as its Sanding Sealer with white colorant added: the heavy-bodied, high-solids formula builds film fast and sands easily, and it is particularly effective on MDF. It acts as a physical barrier, not a chemical one. For woods that bleed tannins, GF recommends its Stain Blocker primer, and for darker tints its Enduro Deep Base Undercoat. Specs are from the current General Finishes product page, with prep and system notes from the GF White Undercoat technical data sheet (2020-03).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based acrylic primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite; tintable to white and light colors only (GF recommends zero-VOC colorants)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterior\/exterior\u003c\/th\u003e\n\u003ctd\u003eInterior\/exterior (GF product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1-2, depending on substrate and application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eSpray recommended (HVLP 1.5-1.8 mm). Synthetic or foam brush, or short nap or foam roller, for face frames when needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet film\u003c\/th\u003e\n\u003ctd\u003e3-5 mils per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft per gallon (GF product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry to touch\u003c\/th\u003e\n\u003ctd\u003e30+ minutes at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1+ hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight solids\u003c\/th\u003e\n\u003ctd\u003e53%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eThick (1000-2000 cPs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eDistilled water, 5% up to 10% by volume; GF Extender 10-15% for more open time where allowed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 90 g\/L (GF product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water for hands; GF Brush \u0026amp; Gun Cleaner for equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand with 120 grit, then 150 or 220 grit (no finer than 220). Remove dust with a water-dampened rag or oil-free tack cloth and let it dry.\u003c\/li\u003e\n\u003cli\u003eExisting finishes: scuff clean with a maroon synthetic pad and a 50:50 mix of denatured alcohol and water, dry 1-2 hours, then sand lightly with a 220-320 grit foam sanding sponge. Test adhesion first.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use to mix in settled solids.\u003c\/li\u003e\n\u003cli\u003eStrain through a medium-mesh filter and spray 3-5 wet mils. One solid coat sanded lightly is often enough; if you sand through a light coat, add another.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine (220-320) foam sanding pad or gray non-woven pad.\u003c\/li\u003e\n\u003cli\u003eTopcoat with GF White Poly or a light-colored pigmented topcoat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal conditions are 70°F and 50% humidity, out of direct sunlight. GF suggests its Accelerator in cool or humid conditions and its Extender in warm or dry conditions.\u003c\/li\u003e\n\u003cli\u003eDo not use steel wool with water-based finishes; trapped particles can rust.\u003c\/li\u003e\n\u003cli\u003eStore between 50°F and 80°F, tightly sealed. Best used within one year of the date on the can. Do not pour leftovers down the drain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSystem picks: \u003ca href=\"\/products\/general-finishes-enduro-water-based-white-poly-satin-gallon\"\u003eGF Enduro White Poly, Satin, Gallon\u003c\/a\u003e as the topcoat, and \u003ca href=\"\/products\/general-finishes-enduro-extender-clear-pint\"\u003eGF Enduro Extender\u003c\/a\u003e for open time. See all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e products.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53905272013110,"sku":"196-723","price":121.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016105014_1_0124.jpg?v=1776394873"},{"product_id":"general-finishes-enduro-clear-polyurethane-satin-gallon","title":"General Finishes Enduro Clear Polyurethane Satin Gallon","description":"\u003ch2\u003eGeneral Finishes Enduro Clear Polyurethane Satin Gallon\u003c\/h2\u003e\n\u003cp\u003eGeneral Finishes Enduro Clear Polyurethane Satin Gallon is a practical protective topcoat for protecting painted, stained, or refinished surfaces. It is a practical choice when you want the right supply in the cart, a clear next step, and a little more confidence before the weekend starts.\u003c\/p\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eprotecting painted, stained, or refinished surfaces\u003c\/li\u003e\n  \u003cli\u003eadding durability after the fun color work is done\u003c\/li\u003e\n  \u003cli\u003eprojects that need a cleaner finish and a better chance of lasting\u003c\/li\u003e\n  \u003cli\u003eAdding the right protective topcoat before a project stalls halfway through\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy it helps you conquer the weekend\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFits naturally into topcoat projects without overcomplicating the plan\u003c\/li\u003e\n  \u003cli\u003ePairs well with the prep, application, and cleanup supplies shoppers usually need next\u003c\/li\u003e\n  \u003cli\u003eKeeps the choice simple so you can spend more time doing and less time second guessing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProject tips\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the product label before use for surface prep, application method, dry time, and safety details\u003c\/li\u003e\n  \u003cli\u003ePrep the surface first so the finish, repair, or application has a better chance to perform\u003c\/li\u003e\n  \u003cli\u003eTest color, sheen, fit, or adhesion on a small area when the final look matters\u003c\/li\u003e\n  \u003cli\u003eAdd any needed tape, sandpaper, brushes, rollers, or topcoat now so the weekend keeps moving\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePair it with related supplies from \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eProject Weekend DIY\u003c\/a\u003e so you can prep, apply, protect, and clean up with fewer surprises.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53905272275254,"sku":"196-696","price":151.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016105076_1_0124.jpg?v=1776394863"},{"product_id":"dalys-seafin-teak-oil-clear-amber-quart","title":"Daly's SeaFin Teak Oil, Clear Amber, Quart","description":"\u003cp\u003e\u003cstrong\u003eDaly's SeaFin Teak Oil, Clear Amber, Quart\u003c\/strong\u003e is intended for interior and exterior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWater repellent\u003c\/li\u003e\n\u003cli\u003eNon-slip finish\u003c\/li\u003e\n\u003cli\u003eCan touch up worn areas\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eMarine brightwork; Doors; Rails; Furniture; Wood exposed to moisture; Varnished surfaces for polishing\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Amber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003epenetrating oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior and exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e15040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may be fatal if swallowed and enters airways; causes skin irritation.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.dalyswoodfinishes.com\/store\/index.php?main_page=product_info\u0026amp;products_id=16\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Daly's","offers":[{"title":"Default Title","offer_id":67666460967222,"sku":"15040-QT","price":52.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/099345150402_1_0624.jpg?v=1791531645"},{"product_id":"watco-danish-oil-275-voc-natural-quart","title":"Watco Danish Oil 275 VOC, Natural, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil 275 VOC, Natural, Quart\u003c\/strong\u003e (Rust-Oleum SKU 242218) is a penetrating blend of oil and varnish that stains, seals and protects bare interior wood in one step. Per Rust-Oleum technical data sheet WAT-15 (Form GDH-882, rev. 052518), it penetrates deep into the wood pores to protect from within, gives the warm glow of a traditional hand-rubbed finish, and will not chip, peel or wear away. It is recommended for furniture, trim, molding and any bare interior wood. It is not recommended for floors or exterior surfaces.\u003c\/p\u003e\n\u003cp\u003eNatural adds no pigment (the TDS lists pigment type as none), so it enhances the wood's own color. This is the lower-VOC (under 275 g\/L) version of Watco Danish Oil.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-15)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1 quart (SKU 242218)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eRaw linseed oil, soybean oil, hydrocarbon resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolvents\u003c\/th\u003e\n\u003ctd\u003eMineral spirits, light aromatic naphtha\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e550-600 sq ft per gallon at 1.0-1.5 dry mils (practical coverage, assumes 15% material loss); varies with type and porosity of wood (a quart is a quarter gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003ePenetrate 30 minutes; reapply and let penetrate 15 more minutes; light use 8-10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eIf you want polyurethane over it, wait 72 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e64.8-65.1% by weight; 59.4-61.2% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 275 g\/L (2.30 lbs\/gal) on the TDS; SDS for this SKU lists 246 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eBare interior wood; not floors or exterior surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply (WAT-15)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the wood is dry and all old paint or varnish is removed. Sand smooth and wipe clean.\u003c\/li\u003e\n\u003cli\u003eShake the container thoroughly and test the color on a hidden spot.\u003c\/li\u003e\n\u003cli\u003eOptional for soft woods such as pine: wipe lightly with a cloth dampened with Danish Oil Natural, then wipe completely dry.\u003c\/li\u003e\n\u003cli\u003eFlood the surface with a brush or cloth, adding more to areas that soak it all up. Let it penetrate 30 minutes.\u003c\/li\u003e\n\u003cli\u003eReapply and let it penetrate another 15 minutes, then wipe the surface completely dry. Ready for use in 8-10 hours.\u003c\/li\u003e\n\u003cli\u003eFor a clear film on top, wait 72 hours. WAT-15 names Varathane Interior Premium Polyurethane or Varathane Professional Polyurethane; Rust-Oleum's WoodCare catalog sells the premium interior poly as Varathane Interior Polyurethane Oil-Based, for example \u003ca href=\"\/products\/varathane-interior-oil-based-polyurethane-satin-quart\"\u003eSatin quart\u003c\/a\u003e or \u003ca href=\"\/products\/varathane-interior-oil-based-polyurethane-clear-semi-gloss-quart\"\u003eSemi-Gloss quart\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eApply fresh coats as needed to repair surface scratches and remove minor stains. Burnish the area with fine steel wool or 220-grit sandpaper, then apply the same Watco Danish Oil color you used originally. Dry time varies with temperature, humidity and ventilation.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDanger (Rust-Oleum SDS for SKU 242218, rev. 2\/9\/2016): flammable liquid and vapor; may cause an allergic skin reaction; causes serious eye irritation; may cause genetic defects; may cause cancer; suspected of damaging fertility or the unborn child; causes damage to organs. Read the label and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/242218.PDF\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before use.\u003c\/li\u003e\n\u003cli\u003eIf you scrape, sand or remove old paint, you may release lead dust. Read the label lead warning before you start.\u003c\/li\u003e\n\u003cli\u003eRust-Oleum's WoodCare catalog lists this Natural quart as item 242218 (UPC 020066167516) and its SDS 242218 names it Watco Danish Oil Natural 275 VOC; the WAT-15 product table lists the Natural gallon (242217) and pints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther size: \u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-gallon\"\u003eWatco Danish Oil 275 VOC, Natural gallon\u003c\/a\u003e. Standard formula: \u003ca href=\"\/products\/watco-danish-oil-natural-pint\"\u003eWatco Danish Oil, Natural, Pint\u003c\/a\u003e. Shop \u003ca href=\"\/collections\/wood-oil-finishes-paste-wax\"\u003ewood finishing oils and paste wax\u003c\/a\u003e or all \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes. Sources: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/DigitalEncyclopedia\/Documents\/RustoleumUSA\/TDS\/English\/CBG\/Watco\/WAT-15_Watco_Danish_Oil_Finish_275_VOC_TDS.ashx\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-15 technical data sheet\u003c\/a\u003e, \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/242218.PDF\" target=\"_blank\" rel=\"noopener\"\u003eSDS 242218\u003c\/a\u003e and \u003ca href=\"https:\/\/rustoleumsupport.zendesk.com\/hc\/en-us\/article_attachments\/43083323597709\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WoodCare catalog\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67667427164470,"sku":"242218","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/020066167516.jpg?v=1791538659"},{"product_id":"watco-danish-oil-275-voc-natural-gallon","title":"Watco Danish Oil 275 VOC, Natural, Gallon","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil 275 VOC, Natural, Gallon\u003c\/strong\u003e (Rust-Oleum SKU 242217) is a penetrating blend of oil and varnish that stains, seals and protects bare interior wood in one step. Per Rust-Oleum technical data sheet WAT-15 (Form GDH-882, rev. 052518), it penetrates deep into the wood pores to protect from within, gives the warm glow of a traditional hand-rubbed finish, and will not chip, peel or wear away. It is recommended for furniture, trim, molding and any bare interior wood. It is not recommended for floors or exterior surfaces.\u003c\/p\u003e\n\u003cp\u003eNatural adds no pigment (the TDS lists pigment type as none), so it enhances the wood's own color. This is the lower-VOC (under 275 g\/L) version of Watco Danish Oil.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-15)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1 gallon (SKU 242217)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eRaw linseed oil, soybean oil, hydrocarbon resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolvents\u003c\/th\u003e\n\u003ctd\u003eMineral spirits, light aromatic naphtha\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e550-600 sq ft per gallon at 1.0-1.5 dry mils (practical coverage, assumes 15% material loss); varies with type and porosity of wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003ePenetrate 30 minutes; reapply and let penetrate 15 more minutes; light use 8-10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eIf you want polyurethane over it, wait 72 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e64.8-65.1% by weight; 59.4-61.2% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 275 g\/L (2.30 lbs\/gal) on the TDS; SDS for this SKU lists 269 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eBare interior wood; not floors or exterior surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply (WAT-15)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the wood is dry and all old paint or varnish is removed. Sand smooth and wipe clean.\u003c\/li\u003e\n\u003cli\u003eShake the container thoroughly and test the color on a hidden spot.\u003c\/li\u003e\n\u003cli\u003eOptional for soft woods such as pine: wipe lightly with a cloth dampened with Danish Oil Natural, then wipe completely dry.\u003c\/li\u003e\n\u003cli\u003eFlood the surface with a brush or cloth, adding more to areas that soak it all up. Let it penetrate 30 minutes.\u003c\/li\u003e\n\u003cli\u003eReapply and let it penetrate another 15 minutes, then wipe the surface completely dry. Ready for use in 8-10 hours.\u003c\/li\u003e\n\u003cli\u003eFor a clear film on top, wait 72 hours. WAT-15 names Varathane Interior Premium Polyurethane or Varathane Professional Polyurethane; Rust-Oleum's WoodCare catalog sells the premium interior poly as Varathane Interior Polyurethane Oil-Based, for example \u003ca href=\"\/products\/varathane-interior-oil-based-polyurethane-satin-quart\"\u003eSatin quart\u003c\/a\u003e or \u003ca href=\"\/products\/varathane-interior-oil-based-polyurethane-clear-semi-gloss-quart\"\u003eSemi-Gloss quart\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eApply fresh coats as needed to repair surface scratches and remove minor stains. Burnish the area with fine steel wool or 220-grit sandpaper, then apply the same Watco Danish Oil color you used originally. Dry time varies with temperature, humidity and ventilation.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDanger (Rust-Oleum SDS for SKU 242217, rev. 10\/15\/2019): flammable liquid and vapor; may cause genetic defects; may cause cancer; suspected of damaging fertility or the unborn child; causes damage to organs through prolonged or repeated exposure; causes serious eye irritation; may cause an allergic skin reaction. Read the label and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/242217.PDF\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before use.\u003c\/li\u003e\n\u003cli\u003eIf you scrape, sand or remove old paint, you may release lead dust. Read the label lead warning before you start.\u003c\/li\u003e\n\u003cli\u003eWAT-15 lists this Natural gallon as SKU 242217 (UPC 020066167509 in Rust-Oleum's WoodCare catalog).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther size: \u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-quart\"\u003eWatco Danish Oil 275 VOC, Natural quart\u003c\/a\u003e. Standard formula: \u003ca href=\"\/products\/watco-danish-oil-natural-pint\"\u003eWatco Danish Oil, Natural, Pint\u003c\/a\u003e. Shop \u003ca href=\"\/collections\/wood-oil-finishes-paste-wax\"\u003ewood finishing oils and paste wax\u003c\/a\u003e or all \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes. Sources: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/DigitalEncyclopedia\/Documents\/RustoleumUSA\/TDS\/English\/CBG\/Watco\/WAT-15_Watco_Danish_Oil_Finish_275_VOC_TDS.ashx\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-15 technical data sheet\u003c\/a\u003e, \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/242217.PDF\" target=\"_blank\" rel=\"noopener\"\u003eSDS 242217\u003c\/a\u003e and \u003ca href=\"https:\/\/rustoleumsupport.zendesk.com\/hc\/en-us\/article_attachments\/43083323597709\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WoodCare catalog\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67667432341814,"sku":"242217","price":95.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/020066167509.jpg?v=1791538682"},{"product_id":"envirotex-lite-pour-on-high-gloss-finish-clear-16-oz","title":"EnviroTex Lite Pour-On High Gloss Finish, Clear, 16 oz","description":"\u003cp\u003e\u003cstrong\u003eEnviroTex Lite Pour-On High Gloss Finish, Clear, 16 oz\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1:1 mix by volume\u003c\/li\u003e\n\u003cli\u003eSelf-leveling\u003c\/li\u003e\n\u003cli\u003eAbout 25 minutes working time after pour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eWood; Metal; Glass; Painted surfaces; Paper; Plaster; Fabric\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003e16 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003etwo-part epoxy, 100% solids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003ePint kit 4 sq ft; quart kit 8 sq ft; half gallon kit 16 sq ft; gallon kit 32 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eDust-free after 4-7 hours at 70 F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70 F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eBest at 70-80 F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually one flood coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003ePour-on flood coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eTools with alcohol or solvent before cure; skin with soap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Exterior use; Pours thicker than 1\/8 inch in one layer.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Pint kit 4 sq ft; quart kit 8 sq ft; half gallon kit 16 sq ft; gallon kit 32 sq ft. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Tools with alcohol or solvent before cure; skin with soap and water. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/ETI_instructions_envirotexliteenglish_09-13-2020.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"EnviroTex","offers":[{"title":"Default Title","offer_id":67667969114422,"sku":"2016","price":36.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/033331020164.jpg?v=1791541981"},{"product_id":"envirotex-lite-pour-on-high-gloss-finish-clear-quart","title":"EnviroTex Lite Pour-On High Gloss Finish, Clear, Quart","description":"\u003cp\u003e\u003cstrong\u003eEnviroTex Lite Pour-On High Gloss Finish, Clear, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1:1 mix by volume\u003c\/li\u003e\n\u003cli\u003eSelf-leveling\u003c\/li\u003e\n\u003cli\u003eAbout 25 minutes working time after pour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eWood; Metal; Glass; Painted surfaces; Paper; Plaster; Fabric\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003etwo-part epoxy, 100% solids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003ePint kit 4 sq ft; quart kit 8 sq ft; half gallon kit 16 sq ft; gallon kit 32 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eDust-free after 4-7 hours at 70 F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70 F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eBest at 70-80 F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually one flood coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003ePour-on flood coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eTools with alcohol or solvent before cure; skin with soap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e2032\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Exterior use; Pours thicker than 1\/8 inch in one layer.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Pint kit 4 sq ft; quart kit 8 sq ft; half gallon kit 16 sq ft; gallon kit 32 sq ft. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Tools with alcohol or solvent before cure; skin with soap and water. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/ETI_instructions_envirotexliteenglish_09-13-2020.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"EnviroTex","offers":[{"title":"Default Title","offer_id":67667970720054,"sku":"2032","price":57.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/033331020324.jpg?v=1791904181"},{"product_id":"envirotex-lite-pour-on-high-gloss-finish-clear-gallon","title":"EnviroTex Lite Pour-On High Gloss Finish, Clear, Gallon","description":"\u003cp\u003e\u003cstrong\u003eEnviroTex Lite Pour-On High Gloss Finish, Clear, Gallon\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1:1 mix by volume\u003c\/li\u003e\n\u003cli\u003eSelf-leveling\u003c\/li\u003e\n\u003cli\u003eAbout 25 minutes working time after pour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eWood; Metal; Glass; Painted surfaces; Paper; Plaster; Fabric\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003etwo-part epoxy, 100% solids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003ePint kit 4 sq ft; quart kit 8 sq ft; half gallon kit 16 sq ft; gallon kit 32 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eDust-free after 4-7 hours at 70 F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e72 hours at 70 F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eBest at 70-80 F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually one flood coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003ePour-on flood coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eTools with alcohol or solvent before cure; skin with soap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e2128\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Exterior use; Pours thicker than 1\/8 inch in one layer.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Pint kit 4 sq ft; quart kit 8 sq ft; half gallon kit 16 sq ft; gallon kit 32 sq ft. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Tools with alcohol or solvent before cure; skin with soap and water. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/ETI_instructions_envirotexliteenglish_09-13-2020.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"EnviroTex","offers":[{"title":"Default Title","offer_id":67667972718902,"sku":"2128","price":165.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/033331021284.jpg?v=1791542030"},{"product_id":"watco-lacquer-clear-wood-finish-satin-quart","title":"Watco Lacquer Clear Wood Finish, Satin, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Lacquer Clear Wood Finish, Satin, Quart\u003c\/strong\u003e (Rust-Oleum SKU 63241) is a durable, clear brush-on lacquer for interior wood. Rust-Oleum says it fills the pores of most woods, eliminating the need for wood filler, and it is ideal for furniture, doors, cabinets and paneling. It is not recommended for floors or exterior surfaces. Specs below are from the brush-on column of Rust-Oleum technical data sheet WAT-01 (Form GDH-416, rev. 091222).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-01, brush-on)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eNitrocellulose modified alkyd, rosin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin, clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood: furniture, doors, cabinets, paneling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eFloors or exterior surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e190-290 sq ft per gallon at 1.0-1.5 dry mils (a quart is a quarter gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet film per coat\u003c\/th\u003e\n\u003ctd\u003e5.0-7.0 mils, unthinned\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eAt least 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 1 hour; light use 24 hours; normal use 7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eDirections: after 2 hours, once the coat has dried clear and feels hard. The dry-time table lists 12 hours for brush-on.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 55-90°F, relative humidity below 85%, not in direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids by volume\u003c\/th\u003e\n\u003ctd\u003e20.6-21.7%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e651-659 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eLacquer thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the surface is clean, dry and free of wax, grease, oil, shellac, mildew and polish. Remove wax with a wax stripper, shellac with a paint stripper, and mildew with a 10% household bleach and water solution.\u003c\/li\u003e\n\u003cli\u003eUnfinished wood: sand with 150-220 grit and remove all dust with a vacuum or a rag dampened with mineral spirits. Any filler or putty must be wax-free and fully dry.\u003c\/li\u003e\n\u003cli\u003eOver stain or paint: let it dry thoroughly first. Test over white or pastel paints and stains, since lacquer can change their look.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Do not shake, overbrush or roll it on, which causes bubbles. Use a good quality bristle brush or applicator.\u003c\/li\u003e\n\u003cli\u003eRecoat only when the previous coat has dried clear and feels hard. If a coat has dried more than 6 hours, sand lightly with 220 grit first to avoid brush marks.\u003c\/li\u003e\n\u003cli\u003eApply at least 3 coats. Allow 24 hours before light use and 7 days before normal use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse adequate ventilation at all times.\u003c\/li\u003e\n\u003cli\u003eDanger (Rust-Oleum SDS for SKU 63241, rev. 12\/13\/2024): extremely flammable liquid and vapor; causes skin irritation; causes serious eye damage; harmful if inhaled; may cause respiratory irritation; may cause drowsiness or dizziness; may cause genetic defects; may cause cancer; may cause damage to organs through prolonged or repeated exposure. Read the label and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/63241.PDF\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before use.\u003c\/li\u003e\n\u003cli\u003eIf you scrape, sand or remove old paint, you may release lead dust. Read the label lead warning before you start.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSame finish in a can: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-satin-11-25-oz\"\u003eWatco Lacquer Spray, Satin\u003c\/a\u003e. Other brush-on sheens: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-gloss-quart\"\u003eGloss quart\u003c\/a\u003e and \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-semi-gloss-quart\"\u003eSemi-Gloss quart\u003c\/a\u003e. See all \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes. Full directions: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/FA253D12C690471097825EE2A30CDEE6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-01 technical data sheet (rev. 091222)\u003c\/a\u003e and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/63241.PDF\" target=\"_blank\" rel=\"noopener\"\u003eSDS 63241\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67667976126774,"sku":"63241","price":26.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748063244.jpg?v=1791542091"},{"product_id":"watco-lacquer-clear-wood-finish-satin-gallon","title":"Watco Lacquer Clear Wood Finish, Satin, Gallon","description":"\u003cp\u003e\u003cstrong\u003eWatco Lacquer Clear Wood Finish, Satin, Gallon\u003c\/strong\u003e (Rust-Oleum SKU 63231) is a durable, clear brush-on lacquer for interior wood. Rust-Oleum says it fills the pores of most woods, eliminating the need for wood filler, and it is ideal for furniture, doors, cabinets and paneling. It is not recommended for floors or exterior surfaces. Specs below are from the brush-on column of Rust-Oleum technical data sheet WAT-01 (Form GDH-416, rev. 091222).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-01, brush-on)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eNitrocellulose modified alkyd, rosin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin, clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood: furniture, doors, cabinets, paneling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eFloors or exterior surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e190-290 sq ft per gallon at 1.0-1.5 dry mils (practical coverage, assumes 15% material loss)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet film per coat\u003c\/th\u003e\n\u003ctd\u003e5.0-7.0 mils, unthinned\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eAt least 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 1 hour; light use 24 hours; normal use 7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eDirections: after 2 hours, once the coat has dried clear and feels hard. The dry-time table lists 12 hours for brush-on.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 55-90°F, relative humidity below 85%, not in direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e25.8-29.1% by weight; 20.6-21.7% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e651-659 g\/L on the TDS; SDS for this SKU lists 658 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eLacquer thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the surface is clean, dry and free of wax, grease, oil, shellac, mildew and polish. Remove wax with a wax stripper, shellac with a paint stripper, and mildew with a 10% household bleach and water solution.\u003c\/li\u003e\n\u003cli\u003ePreviously finished wood: old finishes in poor condition must be removed. Sand to a smooth surface and remove all sanding dust with a vacuum or a cloth dampened with mineral spirits.\u003c\/li\u003e\n\u003cli\u003eUnfinished wood: sand with 150-220 grit and remove all dust. Any filler or putty must be wax-free and fully dry.\u003c\/li\u003e\n\u003cli\u003eOver stain or paint: let it dry thoroughly first. Test over white or pastel paints and stains, since lacquer can change their look.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Do not shake, overbrush or roll it on, which causes bubbles. Use a good quality bristle brush or applicator.\u003c\/li\u003e\n\u003cli\u003eRecoat only when the previous coat has dried clear and feels hard. If a coat has dried more than 6 hours, sand lightly with 220 grit first to avoid brush marks.\u003c\/li\u003e\n\u003cli\u003eApply at least 3 coats. Allow 24 hours before light use and 7 days before normal use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse adequate ventilation at all times and do not apply in direct sunlight.\u003c\/li\u003e\n\u003cli\u003eDanger (Rust-Oleum SDS for SKU 63231, rev. 2\/6\/2026): extremely flammable liquid and vapor; causes skin irritation; causes serious eye damage; harmful if inhaled; may cause respiratory irritation; may cause drowsiness or dizziness; may cause genetic defects; may cause cancer; may cause damage to organs through prolonged or repeated exposure. Read the label and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/63231.PDF\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before use.\u003c\/li\u003e\n\u003cli\u003eIf you scrape, sand or remove old paint, you may release lead dust. Read the label lead warning before you start.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSame finish in a smaller size: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-satin-quart\"\u003eSatin quart\u003c\/a\u003e, or in a can: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-satin-11-25-oz\"\u003eWatco Lacquer Spray, Satin\u003c\/a\u003e. Other brush-on sheens: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-gloss-quart\"\u003eGloss quart\u003c\/a\u003e and \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-semi-gloss-quart\"\u003eSemi-Gloss quart\u003c\/a\u003e. See all \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes. Full directions: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/FA253D12C690471097825EE2A30CDEE6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-01 technical data sheet\u003c\/a\u003e. Maker page: \u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/lacquer-clear-wood-finish\" target=\"_blank\" rel=\"noopener\"\u003eWatco Lacquer Clear Wood Finish\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67667976913206,"sku":"63231","price":74.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748063237.jpg?v=1791542107"},{"product_id":"watco-lacquer-clear-wood-finish-spray-satin-11-25-oz","title":"Watco Lacquer Clear Wood Finish Spray, Satin, 11.25 oz","description":"\u003cp\u003e\u003cstrong\u003eWatco Lacquer Clear Wood Finish Spray, Satin\u003c\/strong\u003e (Rust-Oleum SKU 63281) is a durable, clear nitrocellulose lacquer in an aerosol for interior wood. Rust-Oleum says it fills the pores of most woods, eliminating the need for wood filler, and it is ideal for furniture, doors, cabinets and paneling. It is not recommended for floors or exterior surfaces. Specs below are from Rust-Oleum technical data sheet WAT-01 (Form GDH-416, rev. 032718).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-01)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eNitrocellulose modified alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin, clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood: furniture, doors, cabinets, paneling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eFloors or exterior surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e40 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry film per coat\u003c\/th\u003e\n\u003ctd\u003e1.0-1.5 mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eAt least 3 light coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 30 minutes; recoat 2 hours; light use 24 hours; normal use 7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 55-90°F, relative humidity below 85%, not in direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eTurn the can upside down and spray for several seconds to clear the tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the surface is clean, dry and free of wax, grease, oil, shellac, mildew and polish. Remove wax with a wax stripper, shellac with a paint stripper, and mildew with a 10% household bleach and water solution.\u003c\/li\u003e\n\u003cli\u003eUnfinished wood: sand with 150-220 grit and remove all dust with a vacuum or a rag dampened with mineral spirits. Any filler or putty must be wax-free and fully dry.\u003c\/li\u003e\n\u003cli\u003eOver stain or paint: let it dry thoroughly first. Test over white or pastel paints and stains, since lacquer can change their look.\u003c\/li\u003e\n\u003cli\u003eShake the can for 2 minutes. Spray light coats 8-12 inches from the surface to avoid runs and sags.\u003c\/li\u003e\n\u003cli\u003eRecoat after 2 hours, once the previous coat has dried clear and feels hard. If a coat has dried more than 6 hours, sand lightly with 220 grit first.\u003c\/li\u003e\n\u003cli\u003eApply at least 3 coats. Allow 24 hours before light use and 7 days before normal use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeveral light coats give a better finish than one heavy coat.\u003c\/li\u003e\n\u003cli\u003eUse adequate ventilation. Flammable aerosol: read the label and the Rust-Oleum SDS before use.\u003c\/li\u003e\n\u003cli\u003eRust-Oleum recommends Watco lacquer as the topcoat over \u003ca href=\"\/products\/varathane-weathered-wood-accelerator-quart\"\u003eVarathane Weathered Wood Accelerator\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther sheens: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-gloss-11-25-oz\"\u003eGloss spray\u003c\/a\u003e, \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-semi-gloss-11-25-oz\"\u003eSemi-Gloss spray\u003c\/a\u003e, or the \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-satin-quart\"\u003ebrush-on Satin quart\u003c\/a\u003e. See all \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes. Full directions: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/DigitalEncyclopedia\/Documents\/RustoleumUSA\/TDS\/English\/CBG\/Watco\/WAT-01_Watco_Clear_Wood_Finish.ashx\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-01 technical data sheet\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67667977339190,"sku":"63281","price":15.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748063282.jpg?v=1791730283"},{"product_id":"watco-lacquer-clear-wood-finish-gloss-quart","title":"Watco Lacquer Clear Wood Finish, Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Lacquer Clear Wood Finish, Gloss, Quart\u003c\/strong\u003e (Rust-Oleum SKU 63041) is a durable, clear brush-on lacquer for interior wood. Rust-Oleum says it fills the pores of most woods, eliminating the need for wood filler, and it is ideal for furniture, doors, cabinets and paneling. It is not recommended for floors or exterior surfaces. Specs below are from the brush-on column of Rust-Oleum technical data sheet WAT-01 (Form GDH-416, rev. 091222).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-01, brush-on)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eNitrocellulose modified alkyd, rosin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss, clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood: furniture, doors, cabinets, paneling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eFloors or exterior surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e190-290 sq ft per gallon at 1.0-1.5 dry mils (a quart is a quarter gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet film per coat\u003c\/th\u003e\n\u003ctd\u003e5.0-7.0 mils, unthinned\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eAt least 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 1 hour; light use 24 hours; normal use 7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eDirections: after 2 hours, once the coat has dried clear and feels hard. The dry-time table lists 12 hours for brush-on.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 55-90°F, relative humidity below 85%, not in direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids by volume\u003c\/th\u003e\n\u003ctd\u003e20.6-21.7%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e651-659 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eLacquer thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the surface is clean, dry and free of wax, grease, oil, shellac, mildew and polish. Remove wax with a wax stripper, shellac with a paint stripper, and mildew with a 10% household bleach and water solution.\u003c\/li\u003e\n\u003cli\u003eUnfinished wood: sand with 150-220 grit and remove all dust with a vacuum or a rag dampened with mineral spirits. Any filler or putty must be wax-free and fully dry.\u003c\/li\u003e\n\u003cli\u003eOver stain or paint: let it dry thoroughly first. Test over white or pastel paints and stains, since lacquer can change their look.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Do not shake, overbrush or roll it on, which causes bubbles. Use a good quality bristle brush or applicator.\u003c\/li\u003e\n\u003cli\u003eRecoat only when the previous coat has dried clear and feels hard. If a coat has dried more than 6 hours, sand lightly with 220 grit first to avoid brush marks.\u003c\/li\u003e\n\u003cli\u003eApply at least 3 coats. Allow 24 hours before light use and 7 days before normal use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse adequate ventilation at all times.\u003c\/li\u003e\n\u003cli\u003eDanger (Rust-Oleum SDS for SKU 63041, rev. 2\/6\/2026): extremely flammable liquid and vapor; causes skin irritation; causes serious eye damage; harmful if inhaled; may cause drowsiness or dizziness; may cause genetic defects; may cause cancer; may cause damage to organs through prolonged or repeated exposure. Read the label and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/63041.PDF\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before use.\u003c\/li\u003e\n\u003cli\u003eIf you scrape, sand or remove old paint, you may release lead dust. Read the label lead warning before you start.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSame finish in a can: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-gloss-11-25-oz\"\u003eWatco Lacquer Spray, Gloss\u003c\/a\u003e. Other brush-on sheens: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-semi-gloss-quart\"\u003eSemi-Gloss quart\u003c\/a\u003e and \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-satin-quart\"\u003eSatin quart\u003c\/a\u003e. See all \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes. Full directions: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/FA253D12C690471097825EE2A30CDEE6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-01 technical data sheet (rev. 091222)\u003c\/a\u003e and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/63041.PDF\" target=\"_blank\" rel=\"noopener\"\u003eSDS 63041\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668733755702,"sku":"63041","price":26.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748063046.jpg?v=1791545899"},{"product_id":"watco-lacquer-clear-wood-finish-spray-gloss-11-25-oz","title":"Watco Lacquer Clear Wood Finish Spray, Gloss, 11.25 oz","description":"\u003cp\u003e\u003cstrong\u003eWatco Lacquer Clear Wood Finish Spray, Gloss\u003c\/strong\u003e (Rust-Oleum SKU 63081) is a durable, clear nitrocellulose lacquer in an aerosol for interior wood. Rust-Oleum says it fills the pores of most woods, eliminating the need for wood filler, and it is ideal for furniture, doors, cabinets and paneling. It is not recommended for floors or exterior surfaces. Specs below are from Rust-Oleum technical data sheet WAT-01 (Form GDH-416, rev. 032718).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-01)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eNitrocellulose modified alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss, clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood: furniture, doors, cabinets, paneling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eFloors or exterior surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e40 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry film per coat\u003c\/th\u003e\n\u003ctd\u003e1.0-1.5 mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eAt least 3 light coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 30 minutes; recoat 2 hours; light use 24 hours; normal use 7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 55-90°F, relative humidity below 85%, not in direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eTurn the can upside down and spray for several seconds to clear the tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the surface is clean, dry and free of wax, grease, oil, shellac, mildew and polish. Remove wax with a wax stripper, shellac with a paint stripper, and mildew with a 10% household bleach and water solution.\u003c\/li\u003e\n\u003cli\u003eUnfinished wood: sand with 150-220 grit and remove all dust with a vacuum or a rag dampened with mineral spirits. Any filler or putty must be wax-free and fully dry.\u003c\/li\u003e\n\u003cli\u003eOver stain or paint: let it dry thoroughly first. Test over white or pastel paints and stains, since lacquer can change their look.\u003c\/li\u003e\n\u003cli\u003eShake the can for 2 minutes. Spray light coats 8-12 inches from the surface to avoid runs and sags.\u003c\/li\u003e\n\u003cli\u003eRecoat after 2 hours, once the previous coat has dried clear and feels hard. If a coat has dried more than 6 hours, sand lightly with 220 grit first.\u003c\/li\u003e\n\u003cli\u003eApply at least 3 coats. Allow 24 hours before light use and 7 days before normal use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeveral light coats give a better finish than one heavy coat.\u003c\/li\u003e\n\u003cli\u003eUse adequate ventilation. Flammable aerosol: read the label and the Rust-Oleum SDS before use.\u003c\/li\u003e\n\u003cli\u003eRust-Oleum recommends Watco lacquer as the topcoat over \u003ca href=\"\/products\/varathane-weathered-wood-accelerator-quart\"\u003eVarathane Weathered Wood Accelerator\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther sheens: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-satin-11-25-oz\"\u003eSatin spray\u003c\/a\u003e, \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-semi-gloss-11-25-oz\"\u003eSemi-Gloss spray\u003c\/a\u003e, or the brush-on \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-gloss-quart\"\u003eGloss quart\u003c\/a\u003e. See all \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668758692150,"sku":"63081","price":15.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748063084.jpg?v=1791545943"},{"product_id":"watco-lacquer-clear-wood-finish-semi-gloss-quart","title":"Watco Lacquer Clear Wood Finish, Semi-Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Lacquer Clear Wood Finish, Semi-Gloss, Quart\u003c\/strong\u003e (Rust-Oleum SKU 63141) is a durable, clear brush-on lacquer for interior wood. Rust-Oleum says it fills the pores of most woods, eliminating the need for wood filler, and it is ideal for furniture, doors, cabinets and paneling. It is not recommended for floors or exterior surfaces. Specs below are from the brush-on column of Rust-Oleum technical data sheet WAT-01 (Form GDH-416, rev. 091222).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-01, brush-on)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eNitrocellulose modified alkyd, rosin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSemi-Gloss, clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood: furniture, doors, cabinets, paneling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eFloors or exterior surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e190-290 sq ft per gallon at 1.0-1.5 dry mils (a quart is a quarter gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet film per coat\u003c\/th\u003e\n\u003ctd\u003e5.0-7.0 mils, unthinned\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eAt least 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 1 hour; light use 24 hours; normal use 7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eDirections: after 2 hours, once the coat has dried clear and feels hard. The dry-time table lists 12 hours for brush-on.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 55-90°F, relative humidity below 85%, not in direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids by volume\u003c\/th\u003e\n\u003ctd\u003e20.6-21.7%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e651-659 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eLacquer thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the surface is clean, dry and free of wax, grease, oil, shellac, mildew and polish. Remove wax with a wax stripper, shellac with a paint stripper, and mildew with a 10% household bleach and water solution.\u003c\/li\u003e\n\u003cli\u003eUnfinished wood: sand with 150-220 grit and remove all dust with a vacuum or a rag dampened with mineral spirits. Any filler or putty must be wax-free and fully dry.\u003c\/li\u003e\n\u003cli\u003eOver stain or paint: let it dry thoroughly first. Test over white or pastel paints and stains, since lacquer can change their look.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Do not shake, overbrush or roll it on, which causes bubbles. Use a good quality bristle brush or applicator.\u003c\/li\u003e\n\u003cli\u003eRecoat only when the previous coat has dried clear and feels hard. If a coat has dried more than 6 hours, sand lightly with 220 grit first to avoid brush marks.\u003c\/li\u003e\n\u003cli\u003eApply at least 3 coats. Allow 24 hours before light use and 7 days before normal use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse adequate ventilation at all times.\u003c\/li\u003e\n\u003cli\u003eDanger (Rust-Oleum SDS for SKU 63141, rev. 2\/6\/2026): extremely flammable liquid and vapor; causes skin irritation; causes serious eye damage; harmful if inhaled; may cause drowsiness or dizziness; may cause genetic defects; may cause cancer; may cause damage to organs through prolonged or repeated exposure. Read the label and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/63141.PDF\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before use.\u003c\/li\u003e\n\u003cli\u003eIf you scrape, sand or remove old paint, you may release lead dust. Read the label lead warning before you start.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSame finish in a can: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-semi-gloss-11-25-oz\"\u003eWatco Lacquer Spray, Semi-Gloss\u003c\/a\u003e. Other brush-on sheens: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-gloss-quart\"\u003eGloss quart\u003c\/a\u003e and \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-satin-quart\"\u003eSatin quart\u003c\/a\u003e. See all \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes. Full directions: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/FA253D12C690471097825EE2A30CDEE6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-01 technical data sheet (rev. 091222)\u003c\/a\u003e and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/63141.PDF\" target=\"_blank\" rel=\"noopener\"\u003eSDS 63141\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668783857974,"sku":"63141","price":26.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748063145.jpg?v=1791545981"},{"product_id":"watco-lacquer-clear-wood-finish-spray-semi-gloss-11-25-oz","title":"Watco Lacquer Clear Wood Finish Spray, Semi-Gloss, 11.25 oz","description":"\u003cp\u003e\u003cstrong\u003eWatco Lacquer Clear Wood Finish Spray, Semi-Gloss\u003c\/strong\u003e (Rust-Oleum SKU 63181) is a durable, clear nitrocellulose lacquer in an aerosol for interior wood. Rust-Oleum says it fills the pores of most woods, eliminating the need for wood filler, and it is ideal for furniture, doors, cabinets and paneling. It is not recommended for floors or exterior surfaces. Specs below are from Rust-Oleum technical data sheet WAT-01 (Form GDH-416, rev. 032718).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-01)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eNitrocellulose modified alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSemi-Gloss, clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood: furniture, doors, cabinets, paneling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eFloors or exterior surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e40 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry film per coat\u003c\/th\u003e\n\u003ctd\u003e1.0-1.5 mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eAt least 3 light coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 30 minutes; recoat 2 hours; light use 24 hours; normal use 7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 55-90°F, relative humidity below 85%, not in direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eTurn the can upside down and spray for several seconds to clear the tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the surface is clean, dry and free of wax, grease, oil, shellac, mildew and polish. Remove wax with a wax stripper, shellac with a paint stripper, and mildew with a 10% household bleach and water solution.\u003c\/li\u003e\n\u003cli\u003eUnfinished wood: sand with 150-220 grit and remove all dust with a vacuum or a rag dampened with mineral spirits. Any filler or putty must be wax-free and fully dry.\u003c\/li\u003e\n\u003cli\u003eOver stain or paint: let it dry thoroughly first. Test over white or pastel paints and stains, since lacquer can change their look.\u003c\/li\u003e\n\u003cli\u003eShake the can for 2 minutes. Spray light coats 8-12 inches from the surface to avoid runs and sags.\u003c\/li\u003e\n\u003cli\u003eRecoat after 2 hours, once the previous coat has dried clear and feels hard. If a coat has dried more than 6 hours, sand lightly with 220 grit first.\u003c\/li\u003e\n\u003cli\u003eApply at least 3 coats. Allow 24 hours before light use and 7 days before normal use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeveral light coats give a better finish than one heavy coat.\u003c\/li\u003e\n\u003cli\u003eUse adequate ventilation. Flammable aerosol: read the label and the Rust-Oleum SDS before use.\u003c\/li\u003e\n\u003cli\u003eRust-Oleum recommends Watco lacquer as the topcoat over \u003ca href=\"\/products\/varathane-weathered-wood-accelerator-quart\"\u003eVarathane Weathered Wood Accelerator\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther sheens: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-gloss-11-25-oz\"\u003eGloss spray\u003c\/a\u003e, \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-satin-11-25-oz\"\u003eSatin spray\u003c\/a\u003e, or the \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-semi-gloss-quart\"\u003ebrush-on Semi-Gloss quart\u003c\/a\u003e. See all \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes. Full directions: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/DigitalEncyclopedia\/Documents\/RustoleumUSA\/TDS\/English\/CBG\/Watco\/WAT-01_Watco_Clear_Wood_Finish.ashx\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-01 technical data sheet\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668803158326,"sku":"63181","price":15.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748063183.jpg?v=1791546005"},{"product_id":"watco-wipe-on-poly-clear-satin-quart","title":"Watco Wipe-On Poly, Clear Satin, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Wipe-On Poly, Clear Satin, Quart\u003c\/strong\u003e (Rust-Oleum SKU 68141) gives the protection of a polyurethane finish in a formula you apply by hand with a cloth. Rust-Oleum recommends it for interior furniture and intricate wood items, and says it can be applied to stained, painted or bare interior wood, with a clear finish that resists water and general household chemicals. It is not recommended for floors or exterior wood surfaces. Specs below are from Rust-Oleum technical data sheet WAT-07 (Form GDH-25, rev. 031617).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-07)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin, clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1 quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eUrethane-modified alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolvent\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e50-100 sq ft per quart (varies with type and porosity of wood)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm per coat\u003c\/th\u003e\n\u003ctd\u003e3.5-6.5 mils wet for 1.5-3.0 mils dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 2-4 hours; handle 8-12 hours; recoat 4-6 hours; full cure 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir 60-90°F, relative humidity below 85%; allow longer dry times in damp, humid conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e48-50% by weight; 42-44% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 460 g\/L (3.83 lbs\/gal) on the TDS; SDS for this SKU lists 562 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003eAbove 100°F (38°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePrep\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSurfaces should be clean, dry and free of wax, grease, oil, shellac, lacquer, mildew and polish. Remove wax with a wax stripper, shellac with a paint stripper, and mildew with a 10% household bleach and water solution.\u003c\/li\u003e\n\u003cli\u003eIf the wood needs sanding, sand in the direction of the grain, starting with 120 grit and working through 150, 180 and 220. Remove all dust with a vacuum, tack cloth or rag dampened with mineral spirits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly. Do not shake.\u003c\/li\u003e\n\u003cli\u003eWipe on a coat with a good quality lint-free rag or cloth.\u003c\/li\u003e\n\u003cli\u003eLet it dry 4 hours, then apply a second coat. Wait 4 hours and repeat. Three coats give the best protection.\u003c\/li\u003e\n\u003cli\u003eBefore the final coat, sand lightly in the direction of the grain with 220 grit and remove all sanding dust.\u003c\/li\u003e\n\u003cli\u003eFull cure takes 24 hours at 70°F and 50% relative humidity.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOver white or pastel paints or stains, test in an inconspicuous area first; yellowing may occur.\u003c\/li\u003e\n\u003cli\u003eDanger (Rust-Oleum SDS for SKU 68141, rev. 4\/13\/2023): flammable liquid and vapor; may cause an allergic skin reaction; may cause cancer; may damage fertility or the unborn child; causes damage to organs through prolonged or repeated exposure. Read the label and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/68141.PDF\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before use.\u003c\/li\u003e\n\u003cli\u003eIf you scrape, sand or remove old paint, you may release lead dust. Read the label lead warning before you start.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFinishing over an oil? Rust-Oleum's WAT-02 sheet says to let \u003ca href=\"\/products\/watco-danish-oil-natural-pint\"\u003eWatco Danish Oil\u003c\/a\u003e dry at least 72 hours before a polyurethane topcoat. See all \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e and \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes. Full directions: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/E8A354E492DE4D4485B238077FC4B7D1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-07 technical data sheet\u003c\/a\u003e. Maker page: \u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/wipe-on-poly\" target=\"_blank\" rel=\"noopener\"\u003eWatco Wipe-On Poly\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668817117494,"sku":"68141","price":30.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748068140.jpg?v=1791546031"},{"product_id":"watco-exterior-wood-finish-natural-quart","title":"Watco Exterior Wood Finish, Natural, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Exterior Wood Finish, Natural, Quart\u003c\/strong\u003e is intended for exterior use.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil\u003c\/li\u003e\n\u003cli\u003eWater repellent\u003c\/li\u003e\n\u003cli\u003eUV and mildew protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eNew wood; Old wood; Pressure-treated wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003elinseed oil and phenolic rosin ester in mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eexterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e8-10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eLint-free cloth; Brush; Roller; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e67741\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eDanger: Flammable liquid and vapor; serious eye irritant; skin sensitizer; may cause genetic defects, cancer and organ damage after repeated exposure.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/~\/media\/DigitalEncyclopedia\/Documents\/RustoleumUSA\/TDS\/English\/CBG\/Watco\/WAT-10_Watco_Exterior_Oil_TDS.ashx\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668833829174,"sku":"67741","price":26.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748067747.jpg?v=1791546055"},{"product_id":"watco-teak-oil-finish-quart","title":"Watco Teak Oil Finish, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Teak Oil Finish, Quart\u003c\/strong\u003e is intended for interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUV and moisture resistance\u003c\/li\u003e\n\u003cli\u003ePenetrating oil finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eDense wood; Teak; Rosewood; Mahogany; Furniture; Marine wood above waterline\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Teak Oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-phenolic rosin ester in mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e150-200 sq ft\/quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTack free after 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e30 minutes; additional coats every 15 minutes after first recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAbove 55°F and below 90°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free cloth; Roller; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e67141\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean, dry and remove old finish; Sand 150-220 grit; Remove dust.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Below-waterline marine wood.\u003c\/p\u003e\u003cp\u003eDanger: Representative quart SDS: flammable liquid and vapor; skin sensitizer; serious eye irritant; may cause genetic defects, cancer, reproductive harm and organ damage with repeated exposure.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 150-200 sq ft\/quart. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 30 minutes; additional coats every 15 minutes after first recoat. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/teak-oil-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668853326134,"sku":"67141","price":28.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748067143.jpg?v=1791546079"},{"product_id":"watco-teak-oil-finish-gallon","title":"Watco Teak Oil Finish, Gallon","description":"\u003cp\u003e\u003cstrong\u003eWatco Teak Oil Finish, Gallon\u003c\/strong\u003e is intended for interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUV and moisture resistance\u003c\/li\u003e\n\u003cli\u003ePenetrating oil finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eDense wood; Teak; Rosewood; Mahogany; Furniture; Marine wood above waterline\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Teak Oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-phenolic rosin ester in mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e150-200 sq ft\/quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTack free after 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e30 minutes; additional coats every 15 minutes after first recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAbove 55°F and below 90°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free cloth; Roller; Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e67131\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean, dry and remove old finish; Sand 150-220 grit; Remove dust.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Below-waterline marine wood.\u003c\/p\u003e\u003cp\u003eDanger: Representative quart SDS: flammable liquid and vapor; skin sensitizer; serious eye irritant; may cause genetic defects, cancer, reproductive harm and organ damage with repeated exposure.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 150-200 sq ft\/quart. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 30 minutes; additional coats every 15 minutes after first recoat. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/teak-oil-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668875706678,"sku":"67131","price":84.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748067136.jpg?v=1791546100"},{"product_id":"watco-satin-wax-natural-quart","title":"Watco Satin Wax, Natural, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Satin Wax, Natural, Quart\u003c\/strong\u003e (Rust-Oleum SKU 67041) is a liquid, solvent-based wax that leaves a rich, soft satin luster and adds protection and water resistance to oil-finished or bare wood. Rust-Oleum says to use the Natural wax on light-colored woods (the Dark Stain Wax is for dark woods, and the two can be mixed for a medium tone). It suits furniture, trim, paneling and any interior bare or oil-finished wood. It is not recommended for floors or exterior surfaces. Specs below are from Rust-Oleum technical data sheet WAT-03 (Form GDH-637, rev. 012017).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum WAT-03)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1 quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eResin\u003c\/th\u003e\n\u003ctd\u003eHydrocarbon wax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolvent\u003c\/th\u003e\n\u003ctd\u003eLight petroleum distillate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with type and porosity of wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 30 minutes; handle 30 minutes; recoat 72 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir 60-90°F, relative humidity below 85%; allow longer dry times in damp, humid conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e7.5-10.9% by weight; 6.6-9.3% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e722-744 g\/L on the TDS; SDS for this SKU lists 744 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePrep\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLet any oil or stain already on the wood dry 72 hours before applying the wax.\u003c\/li\u003e\n\u003cli\u003eBare wood: sand with 150-220 grit and remove all sanding dust with a vacuum or a rag dampened with mineral spirits. Any filler or putty must be wax-free and fully dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMix thoroughly before use and stir occasionally while you work.\u003c\/li\u003e\n\u003cli\u003eSpread a thin, even coat with a clean cloth.\u003c\/li\u003e\n\u003cli\u003eWait 10 minutes, then wipe clean and dry.\u003c\/li\u003e\n\u003cli\u003ePolish with a soft cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply more coats as needed over time, buffing with a soft cloth.\u003c\/li\u003e\n\u003cli\u003eFor more luster, reapply the wax and wet sand lightly with the grain using 600-grit wet\/dry sandpaper. After 10 minutes, wipe clean and dry, then polish with a soft cloth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not apply polyurethane or other surface finishes over wax. If you want a clear finish later, remove all the wax with a wax stripper and let the wood dry 72 hours before applying polyurethane.\u003c\/li\u003e\n\u003cli\u003eRust-Oleum's SDS for SKU 67041 (rev. 11\/16\/2022) assigns no hazard signal word. Read the label and \u003ca href=\"https:\/\/www.rustoleum.com\/MSDS\/ENGLISH\/67041.PDF\" target=\"_blank\" rel=\"noopener\"\u003esafety data sheet\u003c\/a\u003e before use.\u003c\/li\u003e\n\u003cli\u003eIf you scrape, sand or remove old paint, you may release lead dust. Read the label lead warning before you start.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOil the wood first? \u003ca href=\"\/products\/watco-danish-oil-natural-pint\"\u003eWatco Danish Oil, Natural\u003c\/a\u003e is an oil finish; let it dry 72 hours before waxing. See all \u003ca href=\"\/collections\/wood-oil-finishes-paste-wax\"\u003ewood finishing oils and paste wax\u003c\/a\u003e and \u003ca href=\"\/collections\/watco\"\u003eWatco\u003c\/a\u003e finishes. Full directions: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/8A56C268DE8740939CE7D3EFEBACF47F.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-03 technical data sheet\u003c\/a\u003e. Maker page: \u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/satin-finishing-wax\" target=\"_blank\" rel=\"noopener\"\u003eWatco Satin Finishing Wax\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67668892320054,"sku":"67041","price":19.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748067044.jpg?v=1791546126"},{"product_id":"varathane-aged-wood-accelerator-quart","title":"Varathane Aged Wood Accelerator, Quart","description":"\u003cp\u003e\u003cstrong\u003eVarathane Aged Wood Accelerator, Quart\u003c\/strong\u003e (Rust-Oleum SKU 331305) gives bare or untreated wood an aged, rustic brown look. The water-based, low-odor formula reacts with the tannins in the wood to replicate the aging process that occurs in nature, so every piece comes out one of a kind and the final look varies with the wood type. It works on all types of wood. Specs below are from Rust-Oleum technical data sheet VAR-104 (Form ARJ-2114, rev. 102021).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum VAR-104)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLook\u003c\/th\u003e\n\u003ctd\u003eAged, rustic brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eWater based, low odor (alkyd emulsion; propylene glycol solvent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eBare or untreated interior wood only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eOutdoor surfaces, floors, non-wood surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eUp to 275 sq ft per quart, depending on wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking time\u003c\/th\u003e\n\u003ctd\u003eLet it sit 30 minutes to 1 hour for the final effect; wiping is not required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSecond coat\u003c\/th\u003e\n\u003ctd\u003eAfter 1 hour, to darken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 1 hour; recoat 1-4 hours; fully dry 1-4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eAfter 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication temperature\u003c\/th\u003e\n\u003ctd\u003e60-90°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle brush or foam brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 260 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003eAbove 200°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove any existing finish with sandpaper or a liquid stripper. It works best on bare or untreated wood.\u003c\/li\u003e\n\u003cli\u003eSand bare wood in the direction of the grain with 100 grit, then remove dust with a clean, dry rag.\u003c\/li\u003e\n\u003cli\u003eTest in an inconspicuous area first, since the reaction differs from wood to wood.\u003c\/li\u003e\n\u003cli\u003eStir or shake before and occasionally during use. Brush it on and let it sit 30 minutes to 1 hour.\u003c\/li\u003e\n\u003cli\u003eFor a lighter effect, wipe it away right after applying, or lightly sand with fine grit sandpaper once dry. To darken, apply a second coat after 1 hour.\u003c\/li\u003e\n\u003cli\u003eLet it dry 2 hours, then topcoat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eProtecting the finish\u003c\/h3\u003e\n\u003cp\u003eRust-Oleum says a topcoat gives the best protection. On furniture and cabinetry, a lacquer spray can be the topcoat, and Watco lacquer gives the best results. For a polyurethane topcoat, seal first with Watco Lacquer spray, then apply Varathane Polyurethane. Test first: some topcoats may keep reacting with the accelerator and change the final look.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTo remove the effect, apply bleach to the surface and wipe off.\u003c\/li\u003e\n\u003cli\u003eIf you scrape, sand or remove old paint, you may release lead dust. Read the label lead warning before you start.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTopcoat picks: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-satin-11-25-oz\"\u003eWatco Lacquer Spray, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-gloss-11-25-oz\"\u003eWatco Lacquer Spray, Gloss\u003c\/a\u003e. Other looks: \u003ca href=\"\/products\/varathane-weathered-wood-accelerator-quart\"\u003eWeathered Wood Accelerator\u003c\/a\u003e (gray) and \u003ca href=\"\/products\/varathane-charred-wood-accelerator-quart\"\u003eCharred Wood Accelerator\u003c\/a\u003e. See all \u003ca href=\"\/collections\/varathane\"\u003eVarathane\u003c\/a\u003e products. Full directions: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/DigitalEncyclopedia\/Documents\/RustoleumUSA\/TDS\/English\/CBG\/Varathane\/VAR-104_Varathane_Aged_Wood_Accelerator_TDS_1.ashx\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum VAR-104 technical data sheet\u003c\/a\u003e.\u003c\/p\u003e","brand":"Varathane","offers":[{"title":"Default Title","offer_id":67671304667446,"sku":"331305","price":24.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/020066381837.jpg?v=1791550083"},{"product_id":"varathane-weathered-wood-accelerator-quart","title":"Varathane Weathered Wood Accelerator, Quart","description":"\u003cp\u003e\u003cstrong\u003eVarathane Weathered Wood Accelerator, Quart\u003c\/strong\u003e (Rust-Oleum SKU 313835) gives bare or untreated wood an aged, gray weathered look. The water-based, low-odor formula reacts with the tannins in the wood to replicate the natural aging process, so every piece comes out one of a kind and the final look varies with the wood type. It works on all types of wood. Specs below are from Rust-Oleum technical data sheet VAR-63 (Form GDH-1256, rev. 102521).\u003c\/p\u003e\n\u003ch3\u003eSpecs (Rust-Oleum VAR-63)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMain ingredient\u003c\/th\u003e\n\u003ctd\u003eFerrous sulfate heptahydrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eWater, low odor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eBare or untreated interior wood only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eOutdoor surfaces, floors, non-wood surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eUp to 275 sq ft per quart, depending on wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking time\u003c\/th\u003e\n\u003ctd\u003eLet it sit 30 minutes to 1 hour for the final effect; wiping is not required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSecond coat\u003c\/th\u003e\n\u003ctd\u003eAfter 1 hour, to darken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry times (70-80°F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 1 hour; recoat 2-4 hours; fully dry 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eAfter 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication temperature\u003c\/th\u003e\n\u003ctd\u003e60-90°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle brush or foam brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 50 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove any existing finish with sandpaper or a liquid stripper.\u003c\/li\u003e\n\u003cli\u003eSand bare wood in the direction of the grain with 100 grit, then remove dust with a clean, dry rag.\u003c\/li\u003e\n\u003cli\u003eTest in an inconspicuous area first, since the reaction differs from wood to wood.\u003c\/li\u003e\n\u003cli\u003eStir or shake before and occasionally during use. Brush it on and let it sit 30 minutes to 1 hour.\u003c\/li\u003e\n\u003cli\u003eFor a lighter effect, wipe it away right after applying, or lightly sand with fine grit sandpaper once dry. To darken, apply a second coat after 1 hour.\u003c\/li\u003e\n\u003cli\u003eLet it dry 2 hours, then topcoat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eProtecting the finish\u003c\/h3\u003e\n\u003cp\u003eRust-Oleum says a topcoat gives the best protection. On furniture and cabinetry, a lacquer spray can be the topcoat, and Watco lacquer gives the best results. For a polyurethane topcoat, seal first with Watco Lacquer spray, then apply Varathane Polyurethane. Test first: some topcoats may keep reacting with the accelerator and change the final look.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTo remove the effect, apply bleach to the surface and wipe off.\u003c\/li\u003e\n\u003cli\u003eIf you scrape, sand or remove old paint, you may release lead dust. Read the label lead warning before you start.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTopcoat picks: \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-satin-11-25-oz\"\u003eWatco Lacquer Spray, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/watco-lacquer-clear-wood-finish-spray-gloss-11-25-oz\"\u003eWatco Lacquer Spray, Gloss\u003c\/a\u003e. See all \u003ca href=\"\/collections\/varathane\"\u003eVarathane\u003c\/a\u003e products.\u003c\/p\u003e","brand":"Varathane","offers":[{"title":"Default Title","offer_id":67671304700214,"sku":"313835","price":19.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/020066344771.jpg?v=1791730284"},{"product_id":"watco-danish-oil-natural-pint","title":"Watco Danish Oil, Natural, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Natural, Pint\u003c\/strong\u003e (Rust-Oleum part 65751) is a penetrating oil and varnish blend for bare interior wood. It soaks into the grain to stain, seal and protect in one step, leaving a hand-rubbed look that will not crack, chip or peel. Specs below are from Rust-Oleum technical data sheet WAT-02 for Watco Danish Oil (Form GDH-636, rev. 010526). For a lower-VOC option, see \u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-quart\"\u003eWatco Danish Oil 275 VOC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend (natural drying and semi-drying oils, rosin ester)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e15 minutes for another coat; at least 72 hours before a topcoat (70-80°F, 50% RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65751\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eRust-Oleum's product page says indoor use only, not recommended for floors.\u003c\/p\u003e\u003cp\u003eFlammable. Rust-Oleum warns that rags, brushes or other waste soaked with this product may spontaneously catch fire if improperly discarded: immediately after use, place them in a sealed, water-filled metal container. Read the label and the Rust-Oleum SDS before use.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eRust-Oleum's WAT-02 sheet (rev. 010526) lists recoat at 15 minutes: if more coats are needed, reapply, allow another 15 minutes to penetrate, then wipe the surface completely dry. Wait at least 72 hours before a polyurethane topcoat; darker colors may need slightly longer.\u003c\/p\u003e\u003ch4\u003eHow do I maintain it?\u003c\/h4\u003e\u003cp\u003eRust-Oleum says to apply fresh coats as needed to repair surface scratches and remove minor stains: burnish the area with fine steel wool or 220-grit sandpaper, then apply the same Watco Danish Oil color originally used.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e. Technical data sheet: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/4D8EAB35C87C449B9088A5B186D61E3F.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-02 (rev. 010526)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671306305846,"sku":"65751","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065750.jpg?v=1791550172"},{"product_id":"watco-danish-oil-light-walnut-pint","title":"Watco Danish Oil, Light Walnut, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Light Walnut, Pint\u003c\/strong\u003e (Rust-Oleum part 65551) is a penetrating oil and varnish blend for bare interior wood. It soaks into the grain to stain, seal and protect in one step, leaving a hand-rubbed look that will not crack, chip or peel. Specs below are from Rust-Oleum technical data sheet WAT-02 for Watco Danish Oil (Form GDH-636, rev. 010526). For a lower-VOC option, see \u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-quart\"\u003eWatco Danish Oil 275 VOC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eLight Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend (natural drying and semi-drying oils, rosin ester)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e15 minutes for another coat; at least 72 hours before a topcoat (70-80°F, 50% RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65551\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eRust-Oleum's product page says indoor use only, not recommended for floors.\u003c\/p\u003e\u003cp\u003eFlammable. Rust-Oleum warns that rags, brushes or other waste soaked with this product may spontaneously catch fire if improperly discarded: immediately after use, place them in a sealed, water-filled metal container. Read the label and the Rust-Oleum SDS before use.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eRust-Oleum's WAT-02 sheet (rev. 010526) lists recoat at 15 minutes: if more coats are needed, reapply, allow another 15 minutes to penetrate, then wipe the surface completely dry. Wait at least 72 hours before a polyurethane topcoat; darker colors may need slightly longer.\u003c\/p\u003e\u003ch4\u003eHow do I maintain it?\u003c\/h4\u003e\u003cp\u003eRust-Oleum says to apply fresh coats as needed to repair surface scratches and remove minor stains: burnish the area with fine steel wool or 220-grit sandpaper, then apply the same Watco Danish Oil color originally used.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e. Technical data sheet: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/4D8EAB35C87C449B9088A5B186D61E3F.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-02 (rev. 010526)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671307026742,"sku":"65551","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065552.jpg?v=1791904181"},{"product_id":"watco-danish-oil-medium-walnut-pint","title":"Watco Danish Oil, Medium Walnut, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Medium Walnut, Pint\u003c\/strong\u003e (Rust-Oleum part 65951) is a penetrating oil and varnish blend for bare interior wood. It soaks into the grain to stain, seal and protect in one step, leaving a hand-rubbed look that will not crack, chip or peel. Specs below are from Rust-Oleum technical data sheet WAT-02 for Watco Danish Oil (Form GDH-636, rev. 010526). For a lower-VOC option, see \u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-quart\"\u003eWatco Danish Oil 275 VOC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eMedium Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend (natural drying and semi-drying oils, rosin ester)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e15 minutes for another coat; at least 72 hours before a topcoat (70-80°F, 50% RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65951\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eRust-Oleum's product page says indoor use only, not recommended for floors.\u003c\/p\u003e\u003cp\u003eFlammable. Rust-Oleum warns that rags, brushes or other waste soaked with this product may spontaneously catch fire if improperly discarded: immediately after use, place them in a sealed, water-filled metal container. Read the label and the Rust-Oleum SDS before use.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eRust-Oleum's WAT-02 sheet (rev. 010526) lists recoat at 15 minutes: if more coats are needed, reapply, allow another 15 minutes to penetrate, then wipe the surface completely dry. Wait at least 72 hours before a polyurethane topcoat; darker colors may need slightly longer.\u003c\/p\u003e\u003ch4\u003eHow do I maintain it?\u003c\/h4\u003e\u003cp\u003eRust-Oleum says to apply fresh coats as needed to repair surface scratches and remove minor stains: burnish the area with fine steel wool or 220-grit sandpaper, then apply the same Watco Danish Oil color originally used.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e. Technical data sheet: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/4D8EAB35C87C449B9088A5B186D61E3F.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-02 (rev. 010526)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671307518262,"sku":"65951","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065958.jpg?v=1791550263"},{"product_id":"watco-danish-oil-dark-walnut-pint","title":"Watco Danish Oil, Dark Walnut, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Dark Walnut, Pint\u003c\/strong\u003e (Rust-Oleum part 65851) is a penetrating oil and varnish blend for bare interior wood. It soaks into the grain to stain, seal and protect in one step, leaving a hand-rubbed look that will not crack, chip or peel. Specs below are from Rust-Oleum technical data sheet WAT-02 for Watco Danish Oil (Form GDH-636, rev. 010526). For a lower-VOC option, see \u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-quart\"\u003eWatco Danish Oil 275 VOC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eDark Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend (natural drying and semi-drying oils, rosin ester)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e15 minutes for another coat; at least 72 hours before a topcoat (70-80°F, 50% RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65851\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eRust-Oleum's product page says indoor use only, not recommended for floors.\u003c\/p\u003e\u003cp\u003eFlammable. Rust-Oleum warns that rags, brushes or other waste soaked with this product may spontaneously catch fire if improperly discarded: immediately after use, place them in a sealed, water-filled metal container. Read the label and the Rust-Oleum SDS before use.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eRust-Oleum's WAT-02 sheet (rev. 010526) lists recoat at 15 minutes: if more coats are needed, reapply, allow another 15 minutes to penetrate, then wipe the surface completely dry. Wait at least 72 hours before a polyurethane topcoat; darker colors may need slightly longer.\u003c\/p\u003e\u003ch4\u003eHow do I maintain it?\u003c\/h4\u003e\u003cp\u003eRust-Oleum says to apply fresh coats as needed to repair surface scratches and remove minor stains: burnish the area with fine steel wool or 220-grit sandpaper, then apply the same Watco Danish Oil color originally used.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e. Technical data sheet: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/4D8EAB35C87C449B9088A5B186D61E3F.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-02 (rev. 010526)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671307747638,"sku":"65851","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065859.jpg?v=1791550265"},{"product_id":"watco-danish-oil-black-walnut-pint","title":"Watco Danish Oil, Black Walnut, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Black Walnut, Pint\u003c\/strong\u003e (Rust-Oleum part 65351) is a penetrating oil and varnish blend for bare interior wood. It soaks into the grain to stain, seal and protect in one step, leaving a hand-rubbed look that will not crack, chip or peel. Specs below are from Rust-Oleum technical data sheet WAT-02 for Watco Danish Oil (Form GDH-636, rev. 010526). For a lower-VOC option, see \u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-quart\"\u003eWatco Danish Oil 275 VOC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eBlack Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend (natural drying and semi-drying oils, rosin ester)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e15 minutes for another coat; at least 72 hours before a topcoat (70-80°F, 50% RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65351\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eRust-Oleum's product page says indoor use only, not recommended for floors.\u003c\/p\u003e\u003cp\u003eFlammable. Rust-Oleum warns that rags, brushes or other waste soaked with this product may spontaneously catch fire if improperly discarded: immediately after use, place them in a sealed, water-filled metal container. Read the label and the Rust-Oleum SDS before use.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eRust-Oleum's WAT-02 sheet (rev. 010526) lists recoat at 15 minutes: if more coats are needed, reapply, allow another 15 minutes to penetrate, then wipe the surface completely dry. Wait at least 72 hours before a polyurethane topcoat; darker colors may need slightly longer.\u003c\/p\u003e\u003ch4\u003eHow do I maintain it?\u003c\/h4\u003e\u003cp\u003eRust-Oleum says to apply fresh coats as needed to repair surface scratches and remove minor stains: burnish the area with fine steel wool or 220-grit sandpaper, then apply the same Watco Danish Oil color originally used.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e. Technical data sheet: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/4D8EAB35C87C449B9088A5B186D61E3F.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-02 (rev. 010526)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671308402998,"sku":"65351","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065354.jpg?v=1791550304"},{"product_id":"watco-danish-oil-cherry-pint","title":"Watco Danish Oil, Cherry, Pint","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Cherry, Pint\u003c\/strong\u003e (Rust-Oleum part 65251) is a penetrating oil and varnish blend for bare interior wood. It soaks into the grain to stain, seal and protect in one step, leaving a hand-rubbed look that will not crack, chip or peel. Specs below are from Rust-Oleum technical data sheet WAT-02 for Watco Danish Oil (Form GDH-636, rev. 010526). For a lower-VOC option, see \u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-quart\"\u003eWatco Danish Oil 275 VOC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eCherry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend (natural drying and semi-drying oils, rosin ester)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e15 minutes for another coat; at least 72 hours before a topcoat (70-80°F, 50% RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65251\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eRust-Oleum's product page says indoor use only, not recommended for floors.\u003c\/p\u003e\u003cp\u003eFlammable. Rust-Oleum warns that rags, brushes or other waste soaked with this product may spontaneously catch fire if improperly discarded: immediately after use, place them in a sealed, water-filled metal container. Read the label and the Rust-Oleum SDS before use.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eRust-Oleum's WAT-02 sheet (rev. 010526) lists recoat at 15 minutes: if more coats are needed, reapply, allow another 15 minutes to penetrate, then wipe the surface completely dry. Wait at least 72 hours before a polyurethane topcoat; darker colors may need slightly longer.\u003c\/p\u003e\u003ch4\u003eHow do I maintain it?\u003c\/h4\u003e\u003cp\u003eRust-Oleum says to apply fresh coats as needed to repair surface scratches and remove minor stains: burnish the area with fine steel wool or 220-grit sandpaper, then apply the same Watco Danish Oil color originally used.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e. Technical data sheet: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/4D8EAB35C87C449B9088A5B186D61E3F.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-02 (rev. 010526)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671308435766,"sku":"65251","price":17.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065255.jpg?v=1791550305"},{"product_id":"watco-danish-oil-light-walnut-quart","title":"Watco Danish Oil, Light Walnut, Quart","description":"\u003cp\u003e\u003cstrong\u003eWatco Danish Oil, Light Walnut, Quart\u003c\/strong\u003e (Rust-Oleum part 65541) is a penetrating oil and varnish blend for bare interior wood. It soaks into the grain to stain, seal and protect in one step, leaving a hand-rubbed look that will not crack, chip or peel. Specs below are from Rust-Oleum technical data sheet WAT-02 for Watco Danish Oil (Form GDH-636, rev. 010526). For a lower-VOC option, see \u003ca href=\"\/products\/watco-danish-oil-275-voc-natural-quart\"\u003eWatco Danish Oil 275 VOC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePenetrating oil and varnish blend\u003c\/li\u003e\n\u003cli\u003eStains, seals and protects\u003c\/li\u003e\n\u003cli\u003eWill not crack, chip or peel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eLight Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eOil and varnish blend (natural drying and semi-drying oils, rosin ester)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eVaries with wood type and porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e6-8 hours at 70-80°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e15 minutes for another coat; at least 72 hours before a topcoat (70-80°F, 50% RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003e60-90°F; below 85% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne coat; additional coats if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Lint-free rag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e441-492 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eRust-Oleum polyurethane after at least 72 hours dry; darker colors may need longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e65541\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Remove existing finishes; Sand with grain, progressing 120, 150, 180 and 220 grit; Remove sanding dust, dirt, grease and glue.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTest color on inconspicuous area\u003c\/li\u003e\n\u003cli\u003eMix or shake thoroughly and stir occasionally\u003c\/li\u003e\n\u003cli\u003eApply one liberal coat by brush or lint-free rag\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes penetration, then wipe excess with grain\u003c\/li\u003e\n\u003cli\u003eIf needed, apply another coat and wipe excess after 15 minutes\u003c\/li\u003e\n\u003cli\u003eAllow at least 72 hours before a polyurethane topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eRust-Oleum's product page says indoor use only, not recommended for floors.\u003c\/p\u003e\u003cp\u003eFlammable. Rust-Oleum warns that rags, brushes or other waste soaked with this product may spontaneously catch fire if improperly discarded: immediately after use, place them in a sealed, water-filled metal container. Read the label and the Rust-Oleum SDS before use.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Varies with wood type and porosity. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eRust-Oleum's WAT-02 sheet (rev. 010526) lists recoat at 15 minutes: if more coats are needed, reapply, allow another 15 minutes to penetrate, then wipe the surface completely dry. Wait at least 72 hours before a polyurethane topcoat; darker colors may need slightly longer.\u003c\/p\u003e\u003ch4\u003eHow do I maintain it?\u003c\/h4\u003e\u003cp\u003eRust-Oleum says to apply fresh coats as needed to repair surface scratches and remove minor stains: burnish the area with fine steel wool or 220-grit sandpaper, then apply the same Watco Danish Oil color originally used.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rustoleum.com\/product-catalog\/consumer-brands\/watco\/danish-oil\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e. Technical data sheet: \u003ca href=\"https:\/\/www.rustoleum.com\/-\/media\/4D8EAB35C87C449B9088A5B186D61E3F.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRust-Oleum WAT-02 (rev. 010526)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Default Title","offer_id":67671309025590,"sku":"65541","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/026748065545.jpg?v=1791550349"}],"url":"https:\/\/projectweekenddiy.com\/collections\/protective-finishes-topcoats.oembed?page=11","provider":"Project Weekend DIY","version":"1.0","type":"link"}