{"title":"Old Masters","description":"\u003cdiv class=\"collection-intro\"\u003e\n\u003cp\u003eOld Masters stains and clear finishes for furniture, cabinets, doors, trim, and woodwork. This brand collection includes Gel Stain, Fast Dry Stain, Armor interior water-based clear, Ascend exterior water-based clear, and Scratchide touch-up and putty products carried in the catalog.\u003c\/p\u003e\n\u003cp\u003ePer Old Masters technical data, Gel Stain is a highly pigmented alkyd gel for interior wood (and listed nonporous surfaces such as fiberglass doors). Do not thin. Practical coverage is about 300 to 500 sq ft per gallon on porous wood; finely sanded or nonporous surfaces can run higher (maker lists about 800 to 1,600 sq ft per gallon in those cases). Dry time is about 6 to 8 hours at 70 to 75°F and 35 to 50% humidity; a second coat after 8 hours for deeper color. Carbon Black needs at least 24 hours. VOC about 550 g\/L. Cleanup with mineral spirits; store oily rags in a sealed, water-filled metal container. Old Masters recommends their clear finishes as topcoat; if using a water-based clear, wait at least 24 hours.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLine\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003cth\u003eNotes (maker \/ catalog)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGel Stain\u003c\/td\u003e\n\u003ctd\u003eInterior gel color on hard-to-stain woods\u003c\/td\u003e\n\u003ctd\u003e~300–500 sq ft\/gal porous; ~6–8 hr dry; VOC ~550 g\/L; do not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFast Dry Stain\u003c\/td\u003e\n\u003ctd\u003eInterior wood stain colors for furniture and trim\u003c\/td\u003e\n\u003ctd\u003eColor range in half-pint, quart, and gallon sizes in catalog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArmor\u003c\/td\u003e\n\u003ctd\u003eInterior water-based clear topcoat\u003c\/td\u003e\n\u003ctd\u003eFlat, satin, semi-gloss, and gloss quarts in catalog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAscend\u003c\/td\u003e\n\u003ctd\u003eExterior water-based clear protection\u003c\/td\u003e\n\u003ctd\u003eMatte, satin, semi-gloss, and gloss options in catalog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScratchide \/ putty\u003c\/td\u003e\n\u003ctd\u003eTouch-up pens and putty sticks\u003c\/td\u003e\n\u003ctd\u003eColor-matched repair products for scratches and small voids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eShop related: \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e, \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes gel stain\u003c\/a\u003e, \u003ca href=\"\/collections\/varathane\"\u003eVarathane\u003c\/a\u003e, \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e, and the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing cart\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is Old Masters gel stain best for?\u003c\/summary\u003e\u003cp\u003eOld Masters positions Gel Stain for intense, uniform color on woods that are hard to stain evenly (pine, poplar, maple, plywood, veneers) and for listed nonporous surfaces. The thick gel stays put for color control.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need a topcoat over gel stain?\u003c\/summary\u003e\u003cp\u003eYes for durability. Old Masters recommends their clear finishes. Most clears work; test lacquer for compatibility. For water-based topcoats, wait at least 24 hours after the stain.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eGel stain or Fast Dry stain?\u003c\/summary\u003e\u003cp\u003eUse gel when you want thick, controlled color with less blotching on hard-to-stain woods. Use Fast Dry Stain when you want a traditional liquid wood stain color from the Old Masters color range.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs gel stain for decks?\u003c\/summary\u003e\u003cp\u003eNo. Treat Old Masters Gel Stain as an interior color product. For exterior clear protection, look at Ascend Exterior in this collection; for deck color, use a dedicated exterior deck stain.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e","products":[{"product_id":"old-masters-spar-marine-varnish-oil-based-exterior-satin-clear-quart","title":"Old Masters Spar-Marine Varnish Oil-Based Exterior Satin Clear Quart","description":"\u003ch2\u003eOld Masters Spar-Marine Varnish — Oil-Based Exterior Satin, 1 Quart\u003c\/h2\u003e\u003cp\u003eGive your outdoor weekend project a finish that lasts, then get back to conquering the rest of your list.\u003c\/p\u003e\u003cp\u003eOld Masters Exterior Oil-Based Spar-Marine Varnish is a durable exterior coating for use on wood surfaces. It contains ultraviolet absorbers for advanced sun protection. Use on exterior surfaces such as fences, railings, lawn furniture, doors, boats and marine surfaces. For interior use on windowsills and door frames for added ultraviolet protection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFinish: Satin, Clear\u003c\/li\u003e\n\u003cli\u003eType: Oil-based\u003c\/li\u003e\n\u003cli\u003eUltraviolet absorbers for advanced sun protection\u003c\/li\u003e\n\u003cli\u003eApply with a pure bristle or polyester brush, flat pad, or spray\u003c\/li\u003e\n\u003cli\u003eCoverage: 680 sq ft\/gal theoretical; 250–350 sq ft\/gal at recommended film thickness\u003c\/li\u003e\n\u003cli\u003eDry time: 4–6 hours\u003c\/li\u003e\n\u003cli\u003eApplication temperature: 60–90 deg F air and surface\u003c\/li\u003e\n\u003cli\u003eVOC content: 350 g\/L\u003c\/li\u003e\n\u003cli\u003eSize: 1 quart\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Do not use on wooden decks or steps, wood siding, log homes, or wood boats below the waterline. As with all exterior clear finishes, surfaces that receive direct sunlight may need to be re-coated annually to maintain gloss and prevent cracking and peeling.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":54111880085814,"sku":"318-949","price":51.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348923041_1_0924.jpg?v=1781141874"},{"product_id":"old-masters-fast-dry-stain-natural-half-pint","title":"Old Masters Fast Dry Stain, Natural, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Natural, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673290473782,"sku":"60116","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348601161.jpg?v=1791582804"},{"product_id":"old-masters-fast-dry-stain-golden-oak-half-pint","title":"Old Masters Fast Dry Stain, Golden Oak, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Golden Oak, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eGolden Oak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673290506550,"sku":"60216","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348602168.jpg?v=1791582806"},{"product_id":"old-masters-fast-dry-stain-cherry-half-pint","title":"Old Masters Fast Dry Stain, Cherry, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Cherry, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eCherry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673290539318,"sku":"60316","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348603165.jpg?v=1791582808"},{"product_id":"old-masters-fast-dry-stain-red-mahogany-half-pint","title":"Old Masters Fast Dry Stain, Red Mahogany, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Red Mahogany, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eRed Mahogany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673290572086,"sku":"60416","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348604162.jpg?v=1791582810"},{"product_id":"old-masters-fast-dry-stain-provincial-half-pint","title":"Old Masters Fast Dry Stain, Provincial, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Provincial, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eProvincial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60516\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673290604854,"sku":"60516","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348605169.jpg?v=1791582812"},{"product_id":"old-masters-fast-dry-stain-maple-half-pint","title":"Old Masters Fast Dry Stain, Maple, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Maple, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eMaple\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60616\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673290735926,"sku":"60616","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348606166.jpg?v=1791582814"},{"product_id":"old-masters-fast-dry-stain-early-american-half-pint","title":"Old Masters Fast Dry Stain, Early American, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Early American, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eEarly American\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60716\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673290899766,"sku":"60716","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348607163.jpg?v=1791582816"},{"product_id":"old-masters-fast-dry-stain-dark-mahogany-half-pint","title":"Old Masters Fast Dry Stain, Dark Mahogany, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Dark Mahogany, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eDark Mahogany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60816\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673290932534,"sku":"60816","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348608160.jpg?v=1791582818"},{"product_id":"old-masters-fast-dry-stain-cedar-half-pint","title":"Old Masters Fast Dry Stain, Cedar, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Cedar, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eCedar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60916\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673290965302,"sku":"60916","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348609167.jpg?v=1791582820"},{"product_id":"old-masters-fast-dry-stain-dark-walnut-half-pint","title":"Old Masters Fast Dry Stain, Dark Walnut, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Dark Walnut, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eDark Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673290998070,"sku":"61016","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348610163.jpg?v=1791582822"},{"product_id":"old-masters-fast-dry-stain-special-walnut-half-pint","title":"Old Masters Fast Dry Stain, Special Walnut, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Special Walnut, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eSpecial Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291030838,"sku":"61116","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348611160.jpg?v=1791582823"},{"product_id":"old-masters-fast-dry-stain-spanish-oak-half-pint","title":"Old Masters Fast Dry Stain, Spanish Oak, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Spanish Oak, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eSpanish Oak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291063606,"sku":"61216","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348612167.jpg?v=1791582826"},{"product_id":"old-masters-fast-dry-stain-fruitwood-half-pint","title":"Old Masters Fast Dry Stain, Fruitwood, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Fruitwood, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eFruitwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291096374,"sku":"61316","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348613164.jpg?v=1791582827"},{"product_id":"old-masters-fast-dry-stain-pickling-white-half-pint","title":"Old Masters Fast Dry Stain, Pickling White, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Pickling White, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003ePickling White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291129142,"sku":"61416","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348614161.jpg?v=1791582830"},{"product_id":"old-masters-fast-dry-stain-natural-walnut-half-pint","title":"Old Masters Fast Dry Stain, Natural Walnut, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Natural Walnut, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61616\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291391286,"sku":"61616","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348616165.jpg?v=1791582832"},{"product_id":"old-masters-fast-dry-stain-pecan-half-pint","title":"Old Masters Fast Dry Stain, Pecan, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Pecan, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003ePecan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61716\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291718966,"sku":"61716","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348617162.jpg?v=1791582834"},{"product_id":"old-masters-fast-dry-stain-american-walnut-half-pint","title":"Old Masters Fast Dry Stain, American Walnut, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, American Walnut, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eAmerican Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61816\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291751734,"sku":"61816","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348618169.jpg?v=1791582836"},{"product_id":"old-masters-fast-dry-stain-rich-mahogany-half-pint","title":"Old Masters Fast Dry Stain, Rich Mahogany, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Rich Mahogany, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eRich Mahogany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e62116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291784502,"sku":"62116","price":19.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348621169.jpg?v=1791582838"},{"product_id":"old-masters-fast-dry-stain-espresso-half-pint","title":"Old Masters Fast Dry Stain, Espresso, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Espresso, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eEspresso\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e62316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291850038,"sku":"62316","price":19.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348623163.jpg?v=1791582840"},{"product_id":"old-masters-fast-dry-stain-aged-oak-half-pint","title":"Old Masters Fast Dry Stain, Aged Oak, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Aged Oak, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eAged Oak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e62416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291882806,"sku":"62416","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348624160.jpg?v=1791582842"},{"product_id":"old-masters-fast-dry-stain-weathered-wood-half-pint","title":"Old Masters Fast Dry Stain, Weathered Wood, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Weathered Wood, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eWeathered Wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e62516\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673291981110,"sku":"62516","price":15.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348625167.jpg?v=1791582844"},{"product_id":"old-masters-fast-dry-stain-natural-quart","title":"Old Masters Fast Dry Stain, Natural, Quart","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Natural, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673292046646,"sku":"60104","price":16.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348601048.jpg?v=1791582846"},{"product_id":"old-masters-fast-dry-stain-natural-gallon","title":"Old Masters Fast Dry Stain, Natural, Gallon","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Fast Dry Stain, Natural, Gallon\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003e22 listed factory colors\u003c\/li\u003e\n\u003cli\u003eColors may be intermixed or tinted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood; Cabinets; Doors; Floors; Furniture; Woodwork\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based alkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eTDS technical table: 30 to 60 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F to 75°F and 35% to 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush; Spray; Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eOil-based finish may be applied 30 minutes after wiping if thoroughly dry; wait 24 hours for water-based clear; lacquers and conversion varnishes are stated compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand with medium then fine grit in direction of wood grain; remove dust; Completely remove old finish before staining previously finished wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare interior wood\u003c\/li\u003e\n\u003cli\u003eStir before and during use\u003c\/li\u003e\n\u003cli\u003eBrush, spray, or wipe on stain\u003c\/li\u003e\n\u003cli\u003eWipe off excess with soft cloth before stain dries\u003c\/li\u003e\n\u003cli\u003eLet stain dry thoroughly before applying a topcoat\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, reproductive harm, organ damage from repeated exposure, and aspiration harm. SDS is for Natural Tint Base 60101.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eHow should I clean up?\u003c\/h4\u003e\u003cp\u003eThe manufacturer specifies Paint thinner or mineral spirits. Follow the product label for cleanup and disposal.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/fast-dry-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673292243254,"sku":"60101","price":44.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348601017.jpg?v=1791582848"},{"product_id":"old-masters-water-based-wood-stain-771-golden-oak-half-pint","title":"Old Masters Water-Based Wood Stain, 771 Golden Oak, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Water-Based Wood Stain, 771 Golden Oak, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSemi-transparent\u003c\/li\u003e\n\u003cli\u003eTwo currently listed ready-mixed colors\u003c\/li\u003e\n\u003cli\u003eNatural Tint Base can be tinted with universal colorants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood; Cabinets; Furniture; Doors; Trim; Crafts; Floors\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003e771 Golden Oak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 400 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 2 to 3 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAdditional stain coats after first coat is thoroughly dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%; do not apply below 55°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNylon\/polyester brush; Foam brush; Staining pad; Cloth; Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if stain dries too fast, 5% to 10% water may be added\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eMasters Armor or other Old Masters clear finish; most lacquers, varnishes and polyurethanes after compatibility test; wait 2 to 3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e77116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue; Wet bare wood to raise grain, let dry, sand smooth with grain, and remove dust; Completely remove prior finish before staining previously finished surfaces.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean, grain-raise, dry, sand, and dust wood\u003c\/li\u003e\n\u003cli\u003eStir stain before and during use\u003c\/li\u003e\n\u003cli\u003eApply liberal even coat, maintaining wet edge\u003c\/li\u003e\n\u003cli\u003eWipe off excess while wet in grain direction\u003c\/li\u003e\n\u003cli\u003eAllow to dry before protective finish\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003e: Natural Tint Base 76101 SDS says not hazardous under OSHA 2012 Hazard Communication Standard.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 400 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is Additional stain coats after first coat is thoroughly dry. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/water-based-wood-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673292276022,"sku":"77116","price":10.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348771161.jpg?v=1791582850"},{"product_id":"old-masters-water-based-wood-stain-774-provincial-half-pint","title":"Old Masters Water-Based Wood Stain, 774 Provincial, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Water-Based Wood Stain, 774 Provincial, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSemi-transparent\u003c\/li\u003e\n\u003cli\u003eTwo currently listed ready-mixed colors\u003c\/li\u003e\n\u003cli\u003eNatural Tint Base can be tinted with universal colorants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood; Cabinets; Furniture; Doors; Trim; Crafts; Floors\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003e774 Provincial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 400 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 2 to 3 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAdditional stain coats after first coat is thoroughly dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%; do not apply below 55°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNylon\/polyester brush; Foam brush; Staining pad; Cloth; Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if stain dries too fast, 5% to 10% water may be added\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eMasters Armor or other Old Masters clear finish; most lacquers, varnishes and polyurethanes after compatibility test; wait 2 to 3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e77416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue; Wet bare wood to raise grain, let dry, sand smooth with grain, and remove dust; Completely remove prior finish before staining previously finished surfaces.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean, grain-raise, dry, sand, and dust wood\u003c\/li\u003e\n\u003cli\u003eStir stain before and during use\u003c\/li\u003e\n\u003cli\u003eApply liberal even coat, maintaining wet edge\u003c\/li\u003e\n\u003cli\u003eWipe off excess while wet in grain direction\u003c\/li\u003e\n\u003cli\u003eAllow to dry before protective finish\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003e: Natural Tint Base 76101 SDS says not hazardous under OSHA 2012 Hazard Communication Standard.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 400 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is Additional stain coats after first coat is thoroughly dry. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/water-based-wood-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673292308790,"sku":"77416","price":10.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348774162.jpg?v=1791582852"},{"product_id":"old-masters-water-based-wood-stain-777-dark-mahogany-half-pint","title":"Old Masters Water-Based Wood Stain, 777 Dark Mahogany, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Water-Based Wood Stain, 777 Dark Mahogany, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSemi-transparent\u003c\/li\u003e\n\u003cli\u003eTwo currently listed ready-mixed colors\u003c\/li\u003e\n\u003cli\u003eNatural Tint Base can be tinted with universal colorants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood; Cabinets; Furniture; Doors; Trim; Crafts; Floors\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003e777 Dark Mahogany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 400 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 2 to 3 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAdditional stain coats after first coat is thoroughly dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%; do not apply below 55°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNylon\/polyester brush; Foam brush; Staining pad; Cloth; Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if stain dries too fast, 5% to 10% water may be added\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eMasters Armor or other Old Masters clear finish; most lacquers, varnishes and polyurethanes after compatibility test; wait 2 to 3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e77716\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue; Wet bare wood to raise grain, let dry, sand smooth with grain, and remove dust; Completely remove prior finish before staining previously finished surfaces.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean, grain-raise, dry, sand, and dust wood\u003c\/li\u003e\n\u003cli\u003eStir stain before and during use\u003c\/li\u003e\n\u003cli\u003eApply liberal even coat, maintaining wet edge\u003c\/li\u003e\n\u003cli\u003eWipe off excess while wet in grain direction\u003c\/li\u003e\n\u003cli\u003eAllow to dry before protective finish\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003e: Natural Tint Base 76101 SDS says not hazardous under OSHA 2012 Hazard Communication Standard.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 400 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is Additional stain coats after first coat is thoroughly dry. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/water-based-wood-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673292341558,"sku":"77716","price":10.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348777163.jpg?v=1791582854"},{"product_id":"old-masters-water-based-wood-stain-781-spanish-oak-half-pint","title":"Old Masters Water-Based Wood Stain, 781 Spanish Oak, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Water-Based Wood Stain, 781 Spanish Oak, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSemi-transparent\u003c\/li\u003e\n\u003cli\u003eTwo currently listed ready-mixed colors\u003c\/li\u003e\n\u003cli\u003eNatural Tint Base can be tinted with universal colorants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood; Cabinets; Furniture; Doors; Trim; Crafts; Floors\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003e781 Spanish Oak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 400 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 2 to 3 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAdditional stain coats after first coat is thoroughly dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%; do not apply below 55°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNylon\/polyester brush; Foam brush; Staining pad; Cloth; Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if stain dries too fast, 5% to 10% water may be added\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eMasters Armor or other Old Masters clear finish; most lacquers, varnishes and polyurethanes after compatibility test; wait 2 to 3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e78116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue; Wet bare wood to raise grain, let dry, sand smooth with grain, and remove dust; Completely remove prior finish before staining previously finished surfaces.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean, grain-raise, dry, sand, and dust wood\u003c\/li\u003e\n\u003cli\u003eStir stain before and during use\u003c\/li\u003e\n\u003cli\u003eApply liberal even coat, maintaining wet edge\u003c\/li\u003e\n\u003cli\u003eWipe off excess while wet in grain direction\u003c\/li\u003e\n\u003cli\u003eAllow to dry before protective finish\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003e: Natural Tint Base 76101 SDS says not hazardous under OSHA 2012 Hazard Communication Standard.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 400 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is Additional stain coats after first coat is thoroughly dry. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/water-based-wood-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673292439862,"sku":"78116","price":10.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348781160.jpg?v=1791582856"},{"product_id":"old-masters-water-based-wood-stain-pickling-white-half-pint","title":"Old Masters Water-Based Wood Stain, Pickling White, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Water-Based Wood Stain, Pickling White, Half Pint\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSemi-transparent\u003c\/li\u003e\n\u003cli\u003eTwo currently listed ready-mixed colors\u003c\/li\u003e\n\u003cli\u003eNatural Tint Base can be tinted with universal colorants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood; Cabinets; Furniture; Doors; Trim; Crafts; Floors\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003ePickling White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 400 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 2 to 3 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAdditional stain coats after first coat is thoroughly dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%; do not apply below 55°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNylon\/polyester brush; Foam brush; Staining pad; Cloth; Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if stain dries too fast, 5% to 10% water may be added\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eMasters Armor or other Old Masters clear finish; most lacquers, varnishes and polyurethanes after compatibility test; wait 2 to 3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e78316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue; Wet bare wood to raise grain, let dry, sand smooth with grain, and remove dust; Completely remove prior finish before staining previously finished surfaces.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean, grain-raise, dry, sand, and dust wood\u003c\/li\u003e\n\u003cli\u003eStir stain before and during use\u003c\/li\u003e\n\u003cli\u003eApply liberal even coat, maintaining wet edge\u003c\/li\u003e\n\u003cli\u003eWipe off excess while wet in grain direction\u003c\/li\u003e\n\u003cli\u003eAllow to dry before protective finish\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003e: Natural Tint Base 76101 SDS says not hazardous under OSHA 2012 Hazard Communication Standard.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 400 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is Additional stain coats after first coat is thoroughly dry. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/water-based-wood-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673292472630,"sku":"78316","price":13.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348783164.jpg?v=1791582858"},{"product_id":"old-masters-water-based-wood-stain-natural-tint-base-quart","title":"Old Masters Water-Based Wood Stain, Natural Tint Base, Quart","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Water-Based Wood Stain, Natural Tint Base, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSemi-transparent\u003c\/li\u003e\n\u003cli\u003eTwo currently listed ready-mixed colors\u003c\/li\u003e\n\u003cli\u003eNatural Tint Base can be tinted with universal colorants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood; Cabinets; Furniture; Doors; Trim; Crafts; Floors\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural Tint Base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 400 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 2 to 3 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAdditional stain coats after first coat is thoroughly dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%; do not apply below 55°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNylon\/polyester brush; Foam brush; Staining pad; Cloth; Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if stain dries too fast, 5% to 10% water may be added\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eMasters Armor or other Old Masters clear finish; most lacquers, varnishes and polyurethanes after compatibility test; wait 2 to 3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e76104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue; Wet bare wood to raise grain, let dry, sand smooth with grain, and remove dust; Completely remove prior finish before staining previously finished surfaces.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean, grain-raise, dry, sand, and dust wood\u003c\/li\u003e\n\u003cli\u003eStir stain before and during use\u003c\/li\u003e\n\u003cli\u003eApply liberal even coat, maintaining wet edge\u003c\/li\u003e\n\u003cli\u003eWipe off excess while wet in grain direction\u003c\/li\u003e\n\u003cli\u003eAllow to dry before protective finish\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003e: Natural Tint Base 76101 SDS says not hazardous under OSHA 2012 Hazard Communication Standard.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 400 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is Additional stain coats after first coat is thoroughly dry. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/water-based-wood-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673296437558,"sku":"76104","price":22.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348761049.jpg?v=1791582860"},{"product_id":"old-masters-armor-interior-water-based-finish-flat-quart","title":"Old Masters Armor Interior Water-Based Finish, Flat, Quart","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Armor Interior Water-Based Finish, Flat, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear finish\u003c\/li\u003e\n\u003cli\u003eSelf-sealing\u003c\/li\u003e\n\u003cli\u003ePart B hardener option for floors\u003c\/li\u003e\n\u003cli\u003eDries clear with slight wood amber effect over white or pastel coatings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eWood floors; Cabinets; Furniture; Woodwork; Previously finished surfaces after sanding; Fully dry stained surfaces\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 300 to 400 sq ft\/gal at 3 to 5 wet mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eWithin 30 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1 to 2 hours; dry-time paragraph says ready after 1 hour at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eCuring to ultimate hardness during first week; light use after 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eThree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic fiber brush; Foam brush; Flat pad; Sprayer; Lambswool applicator for large flat areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if needed add small amount of water, up to 8 oz for spray application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eWarm soapy water; rinse clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eTDS: less than 275 g\/L; see notes for variant SDS value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; test over paints and stains; Masters Armor Part B Hardener may be added for floors, one 4 oz container per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e72004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, glue and other contaminants; Sand new wood from medium to fine grit with grain; remove dust; Sand previously finished surfaces with 220 grit to remove gloss and imperfections; Allow oil-based stain at least 48 hours drying before topcoating; Do not use steel wool or tack rag.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare surface and remove sanding dust\u003c\/li\u003e\n\u003cli\u003eStir thoroughly; do not shake; test adhesion\u003c\/li\u003e\n\u003cli\u003eApply full even coats with grain at 3 to 5 wet mils\u003c\/li\u003e\n\u003cli\u003eWait 1 to 2 hours; lightly sand with 220 grit and remove dust\u003c\/li\u003e\n\u003cli\u003eReapply for three coats total\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Over shellac, lacquer, or fillers, stains, or sealers containing stearates; Over sanding sealer on floors.\u003c\/p\u003e\u003cp\u003e: Not considered hazardous under OSHA Hazard Communication Standard 2024\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 300 to 400 sq ft\/gal at 3 to 5 wet mils. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1 to 2 hours; dry-time paragraph says ready after 1 hour at 70°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/masters-armor\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673296470326,"sku":"72004","price":26.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348720046.jpg?v=1791582861"},{"product_id":"old-masters-armor-interior-water-based-finish-satin-quart","title":"Old Masters Armor Interior Water-Based Finish, Satin, Quart","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Armor Interior Water-Based Finish, Satin, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear finish\u003c\/li\u003e\n\u003cli\u003eSelf-sealing\u003c\/li\u003e\n\u003cli\u003ePart B hardener option for floors\u003c\/li\u003e\n\u003cli\u003eDries clear with slight wood amber effect over white or pastel coatings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eWood floors; Cabinets; Furniture; Woodwork; Previously finished surfaces after sanding; Fully dry stained surfaces\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 300 to 400 sq ft\/gal at 3 to 5 wet mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eWithin 30 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1 to 2 hours; dry-time paragraph says ready after 1 hour at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eCuring to ultimate hardness during first week; light use after 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eThree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic fiber brush; Foam brush; Flat pad; Sprayer; Lambswool applicator for large flat areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if needed add small amount of water, up to 8 oz for spray application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eWarm soapy water; rinse clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eTDS: less than 275 g\/L; see notes for variant SDS value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; test over paints and stains; Masters Armor Part B Hardener may be added for floors, one 4 oz container per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e72104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, glue and other contaminants; Sand new wood from medium to fine grit with grain; remove dust; Sand previously finished surfaces with 220 grit to remove gloss and imperfections; Allow oil-based stain at least 48 hours drying before topcoating; Do not use steel wool or tack rag.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare surface and remove sanding dust\u003c\/li\u003e\n\u003cli\u003eStir thoroughly; do not shake; test adhesion\u003c\/li\u003e\n\u003cli\u003eApply full even coats with grain at 3 to 5 wet mils\u003c\/li\u003e\n\u003cli\u003eWait 1 to 2 hours; lightly sand with 220 grit and remove dust\u003c\/li\u003e\n\u003cli\u003eReapply for three coats total\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Over shellac, lacquer, or fillers, stains, or sealers containing stearates; Over sanding sealer on floors.\u003c\/p\u003e\u003cp\u003e: Not considered hazardous under OSHA Hazard Communication Standard 2024\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 300 to 400 sq ft\/gal at 3 to 5 wet mils. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1 to 2 hours; dry-time paragraph says ready after 1 hour at 70°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/masters-armor\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673296732470,"sku":"72104","price":26.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348721043.jpg?v=1791582864"},{"product_id":"old-masters-armor-interior-water-based-finish-semi-gloss-quart","title":"Old Masters Armor Interior Water-Based Finish, Semi-Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Armor Interior Water-Based Finish, Semi-Gloss, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear finish\u003c\/li\u003e\n\u003cli\u003eSelf-sealing\u003c\/li\u003e\n\u003cli\u003ePart B hardener option for floors\u003c\/li\u003e\n\u003cli\u003eDries clear with slight wood amber effect over white or pastel coatings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eWood floors; Cabinets; Furniture; Woodwork; Previously finished surfaces after sanding; Fully dry stained surfaces\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSemi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 300 to 400 sq ft\/gal at 3 to 5 wet mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eWithin 30 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1 to 2 hours; dry-time paragraph says ready after 1 hour at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eCuring to ultimate hardness during first week; light use after 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eThree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic fiber brush; Foam brush; Flat pad; Sprayer; Lambswool applicator for large flat areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if needed add small amount of water, up to 8 oz for spray application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eWarm soapy water; rinse clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eTDS: less than 275 g\/L; see notes for variant SDS value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; test over paints and stains; Masters Armor Part B Hardener may be added for floors, one 4 oz container per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e72204\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, glue and other contaminants; Sand new wood from medium to fine grit with grain; remove dust; Sand previously finished surfaces with 220 grit to remove gloss and imperfections; Allow oil-based stain at least 48 hours drying before topcoating; Do not use steel wool or tack rag.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare surface and remove sanding dust\u003c\/li\u003e\n\u003cli\u003eStir thoroughly; do not shake; test adhesion\u003c\/li\u003e\n\u003cli\u003eApply full even coats with grain at 3 to 5 wet mils\u003c\/li\u003e\n\u003cli\u003eWait 1 to 2 hours; lightly sand with 220 grit and remove dust\u003c\/li\u003e\n\u003cli\u003eReapply for three coats total\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Over shellac, lacquer, or fillers, stains, or sealers containing stearates; Over sanding sealer on floors.\u003c\/p\u003e\u003cp\u003e: Not considered hazardous under OSHA Hazard Communication Standard 2024\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 300 to 400 sq ft\/gal at 3 to 5 wet mils. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1 to 2 hours; dry-time paragraph says ready after 1 hour at 70°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/masters-armor\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673296765238,"sku":"72204","price":26.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348722040.jpg?v=1791582866"},{"product_id":"old-masters-armor-interior-water-based-finish-gloss-quart","title":"Old Masters Armor Interior Water-Based Finish, Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Armor Interior Water-Based Finish, Gloss, Quart\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear finish\u003c\/li\u003e\n\u003cli\u003eSelf-sealing\u003c\/li\u003e\n\u003cli\u003ePart B hardener option for floors\u003c\/li\u003e\n\u003cli\u003eDries clear with slight wood amber effect over white or pastel coatings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eWood floors; Cabinets; Furniture; Woodwork; Previously finished surfaces after sanding; Fully dry stained surfaces\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 300 to 400 sq ft\/gal at 3 to 5 wet mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eWithin 30 minutes at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1 to 2 hours; dry-time paragraph says ready after 1 hour at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eCuring to ultimate hardness during first week; light use after 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eThree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic fiber brush; Foam brush; Flat pad; Sprayer; Lambswool applicator for large flat areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if needed add small amount of water, up to 8 oz for spray application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eWarm soapy water; rinse clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eTDS: less than 275 g\/L; see notes for variant SDS value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; test over paints and stains; Masters Armor Part B Hardener may be added for floors, one 4 oz container per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e72304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, glue and other contaminants; Sand new wood from medium to fine grit with grain; remove dust; Sand previously finished surfaces with 220 grit to remove gloss and imperfections; Allow oil-based stain at least 48 hours drying before topcoating; Do not use steel wool or tack rag.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare surface and remove sanding dust\u003c\/li\u003e\n\u003cli\u003eStir thoroughly; do not shake; test adhesion\u003c\/li\u003e\n\u003cli\u003eApply full even coats with grain at 3 to 5 wet mils\u003c\/li\u003e\n\u003cli\u003eWait 1 to 2 hours; lightly sand with 220 grit and remove dust\u003c\/li\u003e\n\u003cli\u003eReapply for three coats total\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Over shellac, lacquer, or fillers, stains, or sealers containing stearates; Over sanding sealer on floors.\u003c\/p\u003e\u003cp\u003e: Not considered hazardous under OSHA Hazard Communication Standard 2024\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 300 to 400 sq ft\/gal at 3 to 5 wet mils. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1 to 2 hours; dry-time paragraph says ready after 1 hour at 70°F and 50% RH. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/masters-armor\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673296798006,"sku":"72304","price":26.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348723047.jpg?v=1791582868"},{"product_id":"old-masters-water-based-wood-stain-natural-tint-base-gallon","title":"Old Masters Water-Based Wood Stain, Natural Tint Base, Gallon","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Water-Based Wood Stain, Natural Tint Base, Gallon\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSemi-transparent\u003c\/li\u003e\n\u003cli\u003eTwo currently listed ready-mixed colors\u003c\/li\u003e\n\u003cli\u003eNatural Tint Base can be tinted with universal colorants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBare interior wood; Cabinets; Furniture; Doors; Trim; Crafts; Floors\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eNatural Tint Base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 400 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 2 to 3 hours at 70°F and 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAdditional stain coats after first coat is thoroughly dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir and surface 60°F to 90°F; humidity 30% to 70%; do not apply below 55°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNylon\/polyester brush; Foam brush; Staining pad; Cloth; Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eNot recommended; if stain dries too fast, 5% to 10% water may be added\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eMasters Armor or other Old Masters clear finish; most lacquers, varnishes and polyurethanes after compatibility test; wait 2 to 3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e76101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, grease, and glue; Wet bare wood to raise grain, let dry, sand smooth with grain, and remove dust; Completely remove prior finish before staining previously finished surfaces.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eClean, grain-raise, dry, sand, and dust wood\u003c\/li\u003e\n\u003cli\u003eStir stain before and during use\u003c\/li\u003e\n\u003cli\u003eApply liberal even coat, maintaining wet edge\u003c\/li\u003e\n\u003cli\u003eWipe off excess while wet in grain direction\u003c\/li\u003e\n\u003cli\u003eAllow to dry before protective finish\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Previously finished surfaces until old finish is completely removed.\u003c\/p\u003e\u003cp\u003e: Natural Tint Base 76101 SDS says not hazardous under OSHA 2012 Hazard Communication Standard.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 400 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is Additional stain coats after first coat is thoroughly dry. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/water-based-wood-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673296830774,"sku":"76101","price":63.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348761018.jpg?v=1791582870"},{"product_id":"old-masters-low-voc-wood-conditioner-quart","title":"Old Masters Low VOC Wood Conditioner, Quart","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Low VOC Wood Conditioner, Quart\u003c\/strong\u003e is the Clear, Quart item in this product line. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear pre-stain sealer\u003c\/li\u003e\n\u003cli\u003eHelps even stain absorption\u003c\/li\u003e\n\u003cli\u003eLow VOC formula for specified regions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eSoft woods including pine, fir, maple, poplar, hemlock\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 400 to 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eApply oil-based stain after 8 hours; water-based stain after at least 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003ePolyester brush; Nylon brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eMaximum 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eUnder oil-based stain after 8 hours or water-based stain after minimum 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e51104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand bare wood medium to fine with grain; remove dust without tack rag; Strip previously finished surfaces to bare wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare wood and remove dust\u003c\/li\u003e\n\u003cli\u003eStir thoroughly\u003c\/li\u003e\n\u003cli\u003eBrush over entire surface\u003c\/li\u003e\n\u003cli\u003eAllow 5 to 15 minutes penetration, wipe excess without leaving surface film\u003c\/li\u003e\n\u003cli\u003eWait 8 hours for oil stain or 24 hours for water stain\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: As a sanding sealer.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, and suspected reproductive harm.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 400 to 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is Apply oil-based stain after 8 hours; water-based stain after at least 24 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/wood-conditioner\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673296863542,"sku":"51104","price":31.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348511040_1_0924.jpg?v=1791582872"},{"product_id":"old-masters-low-voc-wood-conditioner-gallon","title":"Old Masters Low VOC Wood Conditioner, Gallon","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Low VOC Wood Conditioner, Gallon\u003c\/strong\u003e is the Clear, Gallon item in this product line. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear pre-stain sealer\u003c\/li\u003e\n\u003cli\u003eHelps even stain absorption\u003c\/li\u003e\n\u003cli\u003eLow VOC formula for specified regions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eSoft woods including pine, fir, maple, poplar, hemlock\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 400 to 500 sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eApply oil-based stain after 8 hours; water-based stain after at least 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eOne application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003ePolyester brush; Nylon brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eMaximum 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eUnder oil-based stain after 8 hours or water-based stain after minimum 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e51101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, wax, and grease; Sand bare wood medium to fine with grain; remove dust without tack rag; Strip previously finished surfaces to bare wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare bare wood and remove dust\u003c\/li\u003e\n\u003cli\u003eStir thoroughly\u003c\/li\u003e\n\u003cli\u003eBrush over entire surface\u003c\/li\u003e\n\u003cli\u003eAllow 5 to 15 minutes penetration, wipe excess without leaving surface film\u003c\/li\u003e\n\u003cli\u003eWait 8 hours for oil stain or 24 hours for water stain\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: As a sanding sealer.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer, and suspected reproductive harm.\u003c\/p\u003e\u003cp\u003eDanger: Oil-soaked rags and sanding waste may ignite spontaneously; place in sealed water-filled metal container.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: Approximately 400 to 500 sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is Apply oil-based stain after 8 hours; water-based stain after at least 24 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/wood-conditioner\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673296896310,"sku":"51101","price":106.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348511019_1_0924.jpg?v=1791582874"},{"product_id":"old-masters-wiping-stain-natural-tint-base-half-pint","title":"Old Masters Wiping Stain, Natural Tint Base, Half Pint","description":"\u003cp\u003eOld Masters Natural Tint Base Wiping Stain, Half Pint, is an interior oil-based tint base for tested custom finishes and lightening other Old Masters Wiping Stain colors. Plan about 31 sq ft from this half-pint can, depending on texture, porosity and application. Test your intended mixture and complete protective-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA rich formula supports controlled color application.\u003c\/li\u003e\n\u003cli\u003eSuitable for difficult-to-stain woods such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eWorks over properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eNatural can lighten other Wiping colors in a tested mixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior furniture, cabinetry, trim and compatible fiberglass, coated metal or composition surfaces. Use as a glaze only over thoroughly dry paint. Manufacturer maple and oak samples are approximate color references; species and preparation affect the result.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eNatural Tint Base \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 31 sq ft per can, scaled from 500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 10 hours general drying; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eUsually 12 hours or longer, when thoroughly dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush, lint-free cloth or spray on bare wood; method varies for other surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits or paint thinner where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eActual VOC 211 g\/L; EPA VOC 212 g\/L; matching SDS revised 13-May-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eClean a dry surface of wax, grease, glue and dirt. Sand bare wood smooth with 120- or 180-grit paper, repair defects and remove dust with a tack rag or mineral-spirits-dampened lint-free cloth. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply liberally with a brush, lint-free cloth or spray. Let penetrate 5–15 minutes, then wipe across the grain and finally with it. On fiberglass\/composition, work one panel at a time and feather streaks while wet.\u003c\/li\u003e\n\u003cli\u003eFor an existing finish, scuff with very fine sandpaper, remove dust, apply a thin uniform coat with foam or bristle brush and dry-brush along the grain. For painted glaze, use fully dry paint, let stain set 5–10 minutes, then dry-brush.\u003c\/li\u003e\n\u003cli\u003eAllow thorough drying, usually 12 hours or longer before recoating or topcoating; hardwood floors need 24 hours or longer. Ideal conditions are 70–75°F and 35–50% humidity. The February 2025 TDS directs complete drying plus an additional 24 hours before water-based finish. Test lacquer compatibility for stain; do not use lacquer over a glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/11116_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection, provide adequate ventilation, avoid breathing vapors and keep ignition sources away. Contaminated rags, steel wool and sanding waste can ignite spontaneously: immediately seal in a water-filled metal container and dispose under local fire rules. Use as packaged; do not thin.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e No. This Wiping Stain is intended for interior use only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Natural protect my project?\u003c\/strong\u003e No. Use a compatible protective clear finish after your tested stain mixture has dried.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Wiping color?\u003c\/strong\u003e Yes. Natural Tint Base can be mixed in any tested proportion with another Wiping Stain color.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673296961846,"sku":"11116","price":13.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348111165.jpg?v=1791582876"},{"product_id":"old-masters-wiping-stain-golden-oak-half-pint","title":"Old Masters Wiping Stain, Golden Oak, Half Pint","description":"\u003cp\u003eOld Masters Wiping Stain in Golden Oak, Half Pint, adds oil-based color to prepared interior wood and compatible surfaces. Plan about 31 sq ft from this half-pint can, with yield affected by wood texture, porosity and application. Its rich formula can also update an existing finish after preparation; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA rich formula supports controlled color application.\u003c\/li\u003e\n\u003cli\u003eSuitable for difficult-to-stain woods such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eWorks over properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eWiping colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior furniture, cabinetry, trim and compatible fiberglass, coated metal or composition surfaces. Use as a glaze only over thoroughly dry paint. Manufacturer maple and oak samples are approximate color references; species and preparation affect the result.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGolden Oak \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 31 sq ft per can, scaled from 500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 10 hours general drying; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eUsually 12 hours or longer, when thoroughly dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush, lint-free cloth or spray on bare wood; method varies for other surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits or paint thinner where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eActual VOC 223 g\/L; EPA VOC 224 g\/L; matching SDS revised 03-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eClean a dry surface of wax, grease, glue and dirt. Sand bare wood smooth with 120- or 180-grit paper, repair defects and remove dust with a tack rag or mineral-spirits-dampened lint-free cloth. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply liberally with a brush, lint-free cloth or spray. Let penetrate 5–15 minutes, then wipe across the grain and finally with it. On fiberglass\/composition, work one panel at a time and feather streaks while wet.\u003c\/li\u003e\n\u003cli\u003eFor an existing finish, scuff with very fine sandpaper, remove dust, apply a thin uniform coat with foam or bristle brush and dry-brush along the grain. For painted glaze, use fully dry paint, let stain set 5–10 minutes, then dry-brush.\u003c\/li\u003e\n\u003cli\u003eAllow thorough drying, usually 12 hours or longer before recoating or topcoating; hardwood floors need 24 hours or longer. Ideal conditions are 70–75°F and 35–50% humidity. The February 2025 TDS directs complete drying plus an additional 24 hours before water-based finish. Test lacquer compatibility for stain; do not use lacquer over a glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/11216_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection, provide adequate ventilation, avoid breathing vapors and keep ignition sources away. Contaminated rags, steel wool and sanding waste can ignite spontaneously: immediately seal in a water-filled metal container and dispose under local fire rules. Use as packaged; do not thin.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e No. This Wiping Stain is intended for interior use only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get a darker shade?\u003c\/strong\u003e Apply an optional second coat after the first is thoroughly dry; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Wiping color?\u003c\/strong\u003e Yes. Natural Tint Base can be mixed in any tested proportion with another Wiping Stain color.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673297027382,"sku":"11216","price":13.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348112162.jpg?v=1791582878"},{"product_id":"old-masters-wiping-stain-cherry-half-pint","title":"Old Masters Wiping Stain, Cherry, Half Pint","description":"\u003cp\u003eOld Masters Wiping Stain in Cherry, Half Pint, adds oil-based color to prepared interior wood and compatible surfaces. Plan about 31 sq ft from this half-pint can, with yield affected by wood texture, porosity and application. Its rich formula can also update an existing finish after preparation; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA rich formula supports controlled color application.\u003c\/li\u003e\n\u003cli\u003eSuitable for difficult-to-stain woods such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eWorks over properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eWiping colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior furniture, cabinetry, trim and compatible fiberglass, coated metal or composition surfaces. Use as a glaze only over thoroughly dry paint. Manufacturer maple and oak samples are approximate color references; species and preparation affect the result.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eCherry \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 31 sq ft per can, scaled from 500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 10 hours general drying; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eUsually 12 hours or longer, when thoroughly dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush, lint-free cloth or spray on bare wood; method varies for other surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits or paint thinner where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eActual VOC 218 g\/L; EPA VOC 219 g\/L; matching SDS revised 18-May-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eClean a dry surface of wax, grease, glue and dirt. Sand bare wood smooth with 120- or 180-grit paper, repair defects and remove dust with a tack rag or mineral-spirits-dampened lint-free cloth. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply liberally with a brush, lint-free cloth or spray. Let penetrate 5–15 minutes, then wipe across the grain and finally with it. On fiberglass\/composition, work one panel at a time and feather streaks while wet.\u003c\/li\u003e\n\u003cli\u003eFor an existing finish, scuff with very fine sandpaper, remove dust, apply a thin uniform coat with foam or bristle brush and dry-brush along the grain. For painted glaze, use fully dry paint, let stain set 5–10 minutes, then dry-brush.\u003c\/li\u003e\n\u003cli\u003eAllow thorough drying, usually 12 hours or longer before recoating or topcoating; hardwood floors need 24 hours or longer. Ideal conditions are 70–75°F and 35–50% humidity. The February 2025 TDS directs complete drying plus an additional 24 hours before water-based finish. Test lacquer compatibility for stain; do not use lacquer over a glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/11316_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection, provide adequate ventilation, avoid breathing vapors and keep ignition sources away. Contaminated rags, steel wool and sanding waste can ignite spontaneously: immediately seal in a water-filled metal container and dispose under local fire rules. Use as packaged; do not thin.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e No. This Wiping Stain is intended for interior use only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get a darker shade?\u003c\/strong\u003e Apply an optional second coat after the first is thoroughly dry; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Wiping color?\u003c\/strong\u003e Yes. Natural Tint Base can be mixed in any tested proportion with another Wiping Stain color.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673297191222,"sku":"11316","price":13.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348113169.jpg?v=1791582880"},{"product_id":"old-masters-wiping-stain-red-mahogany-half-pint","title":"Old Masters Wiping Stain, Red Mahogany, Half Pint","description":"\u003cp\u003eOld Masters Wiping Stain in Red Mahogany, Half Pint, adds oil-based color to prepared interior wood and compatible surfaces. Plan about 31 sq ft from this half-pint can, with yield affected by wood texture, porosity and application. Its rich formula can also update an existing finish after preparation; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA rich formula supports controlled color application.\u003c\/li\u003e\n\u003cli\u003eSuitable for difficult-to-stain woods such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eWorks over properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eWiping colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior furniture, cabinetry, trim and compatible fiberglass, coated metal or composition surfaces. Use as a glaze only over thoroughly dry paint. Manufacturer maple and oak samples are approximate color references; species and preparation affect the result.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eRed Mahogany \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 31 sq ft per can, scaled from 500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 10 hours general drying; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eUsually 12 hours or longer, when thoroughly dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush, lint-free cloth or spray on bare wood; method varies for other surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits or paint thinner where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eActual VOC 222 g\/L; EPA VOC 224 g\/L; matching SDS revised 03-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eClean a dry surface of wax, grease, glue and dirt. Sand bare wood smooth with 120- or 180-grit paper, repair defects and remove dust with a tack rag or mineral-spirits-dampened lint-free cloth. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply liberally with a brush, lint-free cloth or spray. Let penetrate 5–15 minutes, then wipe across the grain and finally with it. On fiberglass\/composition, work one panel at a time and feather streaks while wet.\u003c\/li\u003e\n\u003cli\u003eFor an existing finish, scuff with very fine sandpaper, remove dust, apply a thin uniform coat with foam or bristle brush and dry-brush along the grain. For painted glaze, use fully dry paint, let stain set 5–10 minutes, then dry-brush.\u003c\/li\u003e\n\u003cli\u003eAllow thorough drying, usually 12 hours or longer before recoating or topcoating; hardwood floors need 24 hours or longer. Ideal conditions are 70–75°F and 35–50% humidity. The February 2025 TDS directs complete drying plus an additional 24 hours before water-based finish. Test lacquer compatibility for stain; do not use lacquer over a glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/11416_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection, provide adequate ventilation, avoid breathing vapors and keep ignition sources away. Contaminated rags, steel wool and sanding waste can ignite spontaneously: immediately seal in a water-filled metal container and dispose under local fire rules. Use as packaged; do not thin.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e No. This Wiping Stain is intended for interior use only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get a darker shade?\u003c\/strong\u003e Apply an optional second coat after the first is thoroughly dry; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Wiping color?\u003c\/strong\u003e Yes. Natural Tint Base can be mixed in any tested proportion with another Wiping Stain color.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673297223990,"sku":"11416","price":13.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348114166.jpg?v=1791582883"},{"product_id":"old-masters-wiping-stain-provincial-half-pint","title":"Old Masters Wiping Stain, Provincial, Half Pint","description":"\u003cp\u003eOld Masters Wiping Stain in Provincial, Half Pint, adds oil-based color to prepared interior wood and compatible surfaces. Plan about 31 sq ft from this half-pint can, with yield affected by wood texture, porosity and application. Its rich formula can also update an existing finish after preparation; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA rich formula supports controlled color application.\u003c\/li\u003e\n\u003cli\u003eSuitable for difficult-to-stain woods such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eWorks over properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eWiping colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior furniture, cabinetry, trim and compatible fiberglass, coated metal or composition surfaces. Use as a glaze only over thoroughly dry paint. Manufacturer maple and oak samples are approximate color references; species and preparation affect the result.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eProvincial \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 31 sq ft per can, scaled from 500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 10 hours general drying; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eUsually 12 hours or longer, when thoroughly dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush, lint-free cloth or spray on bare wood; method varies for other surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits or paint thinner where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eActual VOC 220 g\/L; EPA VOC 221 g\/L; matching SDS revised 15-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11516\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eClean a dry surface of wax, grease, glue and dirt. Sand bare wood smooth with 120- or 180-grit paper, repair defects and remove dust with a tack rag or mineral-spirits-dampened lint-free cloth. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply liberally with a brush, lint-free cloth or spray. Let penetrate 5–15 minutes, then wipe across the grain and finally with it. On fiberglass\/composition, work one panel at a time and feather streaks while wet.\u003c\/li\u003e\n\u003cli\u003eFor an existing finish, scuff with very fine sandpaper, remove dust, apply a thin uniform coat with foam or bristle brush and dry-brush along the grain. For painted glaze, use fully dry paint, let stain set 5–10 minutes, then dry-brush.\u003c\/li\u003e\n\u003cli\u003eAllow thorough drying, usually 12 hours or longer before recoating or topcoating; hardwood floors need 24 hours or longer. Ideal conditions are 70–75°F and 35–50% humidity. The February 2025 TDS directs complete drying plus an additional 24 hours before water-based finish. Test lacquer compatibility for stain; do not use lacquer over a glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/11516_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection, provide adequate ventilation, avoid breathing vapors and keep ignition sources away. Contaminated rags, steel wool and sanding waste can ignite spontaneously: immediately seal in a water-filled metal container and dispose under local fire rules. Use as packaged; do not thin.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e No. This Wiping Stain is intended for interior use only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get a darker shade?\u003c\/strong\u003e Apply an optional second coat after the first is thoroughly dry; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Wiping color?\u003c\/strong\u003e Yes. Natural Tint Base can be mixed in any tested proportion with another Wiping Stain color.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673297256758,"sku":"11516","price":13.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348115163.jpg?v=1791582886"},{"product_id":"old-masters-wiping-stain-maple-half-pint","title":"Old Masters Wiping Stain, Maple, Half Pint","description":"\u003cp\u003eOld Masters Wiping Stain in Maple, Half Pint, adds oil-based color to prepared interior wood and compatible surfaces. Plan about 31 sq ft from this half-pint can, with yield affected by wood texture, porosity and application. Its rich formula can also update an existing finish after preparation; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA rich formula supports controlled color application.\u003c\/li\u003e\n\u003cli\u003eSuitable for difficult-to-stain woods such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eWorks over properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eWiping colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior furniture, cabinetry, trim and compatible fiberglass, coated metal or composition surfaces. Use as a glaze only over thoroughly dry paint. Manufacturer maple and oak samples are approximate color references; species and preparation affect the result.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMaple \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 31 sq ft per can, scaled from 500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 10 hours general drying; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eUsually 12 hours or longer, when thoroughly dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush, lint-free cloth or spray on bare wood; method varies for other surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits or paint thinner where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eActual VOC 223 g\/L; EPA VOC 224 g\/L; matching SDS revised 12-Feb-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11616\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eClean a dry surface of wax, grease, glue and dirt. Sand bare wood smooth with 120- or 180-grit paper, repair defects and remove dust with a tack rag or mineral-spirits-dampened lint-free cloth. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply liberally with a brush, lint-free cloth or spray. Let penetrate 5–15 minutes, then wipe across the grain and finally with it. On fiberglass\/composition, work one panel at a time and feather streaks while wet.\u003c\/li\u003e\n\u003cli\u003eFor an existing finish, scuff with very fine sandpaper, remove dust, apply a thin uniform coat with foam or bristle brush and dry-brush along the grain. For painted glaze, use fully dry paint, let stain set 5–10 minutes, then dry-brush.\u003c\/li\u003e\n\u003cli\u003eAllow thorough drying, usually 12 hours or longer before recoating or topcoating; hardwood floors need 24 hours or longer. Ideal conditions are 70–75°F and 35–50% humidity. The February 2025 TDS directs complete drying plus an additional 24 hours before water-based finish. Test lacquer compatibility for stain; do not use lacquer over a glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/11616_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection, provide adequate ventilation, avoid breathing vapors and keep ignition sources away. Contaminated rags, steel wool and sanding waste can ignite spontaneously: immediately seal in a water-filled metal container and dispose under local fire rules. Use as packaged; do not thin.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e No. This Wiping Stain is intended for interior use only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get a darker shade?\u003c\/strong\u003e Apply an optional second coat after the first is thoroughly dry; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Wiping color?\u003c\/strong\u003e Yes. Natural Tint Base can be mixed in any tested proportion with another Wiping Stain color.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673297289526,"sku":"11616","price":13.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348116160.jpg?v=1791582889"},{"product_id":"old-masters-wiping-stain-early-american-half-pint","title":"Old Masters Wiping Stain, Early American, Half Pint","description":"\u003cp\u003eOld Masters Wiping Stain in Early American, Half Pint, adds oil-based color to prepared interior wood and compatible surfaces. Plan about 31 sq ft from this half-pint can, with yield affected by wood texture, porosity and application. Its rich formula can also update an existing finish after preparation; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA rich formula supports controlled color application.\u003c\/li\u003e\n\u003cli\u003eSuitable for difficult-to-stain woods such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eWorks over properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eWiping colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior furniture, cabinetry, trim and compatible fiberglass, coated metal or composition surfaces. Use as a glaze only over thoroughly dry paint. Manufacturer maple and oak samples are approximate color references; species and preparation affect the result.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eEarly American \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based wiping stain \/ interior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 31 sq ft per can, scaled from 500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 10 hours general drying; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eUsually 12 hours or longer, when thoroughly dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush, lint-free cloth or spray on bare wood; method varies for other surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits or paint thinner where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eActual VOC 220 g\/L; EPA VOC 222 g\/L; matching SDS revised 03-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e11716\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eClean a dry surface of wax, grease, glue and dirt. Sand bare wood smooth with 120- or 180-grit paper, repair defects and remove dust with a tack rag or mineral-spirits-dampened lint-free cloth. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir before and during use. On bare wood, apply liberally with a brush, lint-free cloth or spray. Let penetrate 5–15 minutes, then wipe across the grain and finally with it. On fiberglass\/composition, work one panel at a time and feather streaks while wet.\u003c\/li\u003e\n\u003cli\u003eFor an existing finish, scuff with very fine sandpaper, remove dust, apply a thin uniform coat with foam or bristle brush and dry-brush along the grain. For painted glaze, use fully dry paint, let stain set 5–10 minutes, then dry-brush.\u003c\/li\u003e\n\u003cli\u003eAllow thorough drying, usually 12 hours or longer before recoating or topcoating; hardwood floors need 24 hours or longer. Ideal conditions are 70–75°F and 35–50% humidity. The February 2025 TDS directs complete drying plus an additional 24 hours before water-based finish. Test lacquer compatibility for stain; do not use lacquer over a glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/11716_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection, provide adequate ventilation, avoid breathing vapors and keep ignition sources away. Contaminated rags, steel wool and sanding waste can ignite spontaneously: immediately seal in a water-filled metal container and dispose under local fire rules. Use as packaged; do not thin.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use it outdoors?\u003c\/strong\u003e No. This Wiping Stain is intended for interior use only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get a darker shade?\u003c\/strong\u003e Apply an optional second coat after the first is thoroughly dry; test first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Wiping color?\u003c\/strong\u003e Yes. Natural Tint Base can be mixed in any tested proportion with another Wiping Stain color.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673297453366,"sku":"11716","price":13.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348117167.jpg?v=1791582891"},{"product_id":"old-masters-high-solids-penetrating-stain-provincial-gallon","title":"Old Masters High Solids Penetrating Stain, Provincial, Gallon","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying stain for interior wood surfaces\u003c\/li\u003e\n\u003cli\u003eFills, seals and provides deep, rich color\u003c\/li\u003e\n\u003cli\u003eEnhances natural beauty without raising the grain\u003c\/li\u003e\n\u003cli\u003eClean up with mineral spirits or paint thinner\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eProvincial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e42001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause an allergic skin reaction, genetic defects, cancer, and fatal aspiration if swallowed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause an allergic skin reaction, genetic defects, cancer, and fatal aspiration if swallowed.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/penetrating-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673299124534,"sku":"42001","price":62.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348420014.jpg?v=1791582924"},{"product_id":"old-masters-high-solids-penetrating-stain-dark-mahogany-gallon","title":"Old Masters High Solids Penetrating Stain, Dark Mahogany, Gallon","description":"\u003cp\u003e\u003cstrong\u003eOld Masters High Solids Penetrating Stain, Dark Mahogany, Gallon\u003c\/strong\u003e. Dark Mahogany, Clear, Gallon.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFast drying stain for interior wood surfaces\u003c\/li\u003e\n\u003cli\u003eFills, seals and provides deep, rich color\u003c\/li\u003e\n\u003cli\u003eEnhances natural beauty without raising the grain\u003c\/li\u003e\n\u003cli\u003eClean up with mineral spirits or paint thinner\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eDark Mahogany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e42301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause an allergic skin reaction, genetic defects, cancer, and fatal aspiration if swallowed.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; may cause an allergic skin reaction, genetic defects, cancer, and fatal aspiration if swallowed.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/myoldmasters.com\/product\/penetrating-stain\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673299157302,"sku":"42301","price":62.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348423015.jpg?v=1791582926"},{"product_id":"old-masters-gel-stain-natural-half-pint","title":"Old Masters Gel Stain, Natural, Half Pint","description":"\u003cp\u003eOld Masters Natural Gel Stain, Half Pint, is an oil-based alkyd tint base for tested wood finishing and lightening other Old Masters Gel Stain colors. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Test your intended mixture and complete protective-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eNatural can lighten other Gel Stain colors in a tested mix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eNatural \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e549 g\/L Actual\/EPA VOC, matching SDS revised 12-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80116_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Gel color?\u003c\/strong\u003e Yes. The manufacturer permits mixing any proportion; test your chosen ratio first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673299190070,"sku":"80116","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348801165.jpg?v=1791582928"},{"product_id":"old-masters-gel-stain-golden-oak-half-pint","title":"Old Masters Gel Stain, Golden Oak, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Golden Oak, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGolden Oak \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e541 g\/L Actual\/EPA VOC, matching SDS revised 12-Feb-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80216_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673299845430,"sku":"80216","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348802162.jpg?v=1791582931"},{"product_id":"old-masters-gel-stain-cherry-half-pint","title":"Old Masters Gel Stain, Cherry, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Cherry, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eCherry \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e545 g\/L Actual\/EPA VOC, matching SDS revised 03-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80316_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673299878198,"sku":"80316","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348803169.jpg?v=1791582933"},{"product_id":"old-masters-gel-stain-red-mahogany-half-pint","title":"Old Masters Gel Stain, Red Mahogany, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Red Mahogany, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eRed Mahogany \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e544 g\/L Actual\/EPA VOC, matching SDS revised 16-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80416_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300107574,"sku":"80416","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348804166.jpg?v=1791582936"}],"url":"https:\/\/projectweekenddiy.com\/collections\/old-masters.oembed?page=6","provider":"Project Weekend DIY","version":"1.0","type":"link"}