{"title":"Old Masters Gel Stain","description":"\u003cp\u003eOld Masters Gel Stain is a highly pigmented, alkyd-based (oil-based) gel stain for interior wood, fiberglass, primed metal and composition surfaces. Old Masters says its thick formula gives easy application and color control, and it is made for hard-to-stain woods such as pine, poplar, maple, plywood and veneers, plus fiberglass doors and plastic moldings. Shop half pints for samples and small pieces, or quarts for cabinets, doors and furniture.\u003c\/p\u003e\n\u003cp\u003ePractical coverage is 300 to 500 sq ft per gallon (about 19 to 31 sq ft per half pint and 75 to 125 sq ft per quart), depending on the wood. It dries in about 6 to 8 hours at 70 F and 50% relative humidity, and a second coat for more depth can go on after 8 hours. Do not thin. To lighten any color, mix it with Natural Gel Stain. Before a water-based topcoat, let the stain dry completely and then wait another 24 hours.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. New to gel stain? Read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, compare every brand in \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/old-masters\"\u003eOld Masters\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"old-masters-gel-stain-natural-half-pint","title":"Old Masters Gel Stain, Natural, Half Pint","description":"\u003cp\u003eOld Masters Natural Gel Stain, Half Pint, is an oil-based alkyd tint base for tested wood finishing and lightening other Old Masters Gel Stain colors. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Test your intended mixture and complete protective-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eNatural can lighten other Gel Stain colors in a tested mix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eNatural \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e549 g\/L Actual\/EPA VOC, matching SDS revised 12-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80116_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Gel color?\u003c\/strong\u003e Yes. The manufacturer permits mixing any proportion; test your chosen ratio first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673299190070,"sku":"80116","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348801165.jpg?v=1791582928"},{"product_id":"old-masters-gel-stain-golden-oak-half-pint","title":"Old Masters Gel Stain, Golden Oak, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Golden Oak, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGolden Oak \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e541 g\/L Actual\/EPA VOC, matching SDS revised 12-Feb-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80216_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-golden-oak-quart\"\u003eGolden Oak Gel Stain, Quart\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-half-pint\"\u003eSpecial Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-half-pint\"\u003eDark Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-early-american-half-pint\"\u003eEarly American\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-half-pint\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-80216-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eGolden Oak half pint safety data sheet (80216, revised 12-Feb-2026)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673299845430,"sku":"80216","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348802162.jpg?v=1791582931"},{"product_id":"old-masters-gel-stain-cherry-half-pint","title":"Old Masters Gel Stain, Cherry, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Cherry, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eCherry \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e545 g\/L Actual\/EPA VOC, matching SDS revised 03-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80316_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673299878198,"sku":"80316","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348803169.jpg?v=1791582933"},{"product_id":"old-masters-gel-stain-red-mahogany-half-pint","title":"Old Masters Gel Stain, Red Mahogany, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Red Mahogany, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eRed Mahogany \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e544 g\/L Actual\/EPA VOC, matching SDS revised 16-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80416_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300107574,"sku":"80416","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348804166.jpg?v=1791582936"},{"product_id":"old-masters-gel-stain-early-american-half-pint","title":"Old Masters Gel Stain, Early American, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Early American, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eEarly American \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e543 g\/L Actual\/EPA VOC, matching SDS revised 07-Apr-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80616\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80616_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-early-american-quart\"\u003eEarly American Gel Stain, Quart\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-half-pint\"\u003eSpecial Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-half-pint\"\u003eDark Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-natural-walnut-half-pint\"\u003eNatural Walnut\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-half-pint\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-80616-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eEarly American half pint safety data sheet (80616, revised 07-Apr-2026)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300140342,"sku":"80616","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348806160.jpg?v=1791582939"},{"product_id":"old-masters-gel-stain-special-walnut-half-pint","title":"Old Masters Gel Stain, Special Walnut, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Special Walnut, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSpecial Walnut \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e543 g\/L Actual\/EPA VOC, matching SDS revised 03-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80816\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80816_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-quart\"\u003eSpecial Walnut Gel Stain, Quart\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-half-pint\"\u003eDark Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-early-american-half-pint\"\u003eEarly American\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-natural-walnut-half-pint\"\u003eNatural Walnut\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-half-pint\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-80816-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eSpecial Walnut half pint safety data sheet (80816, revised 03-Dec-2025)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300173110,"sku":"80816","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348808164.jpg?v=1791582941"},{"product_id":"old-masters-gel-stain-fruitwood-half-pint","title":"Old Masters Gel Stain, Fruitwood, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Fruitwood, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eFruitwood \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e542 g\/L Actual\/EPA VOC, matching SDS revised 30-Apr-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80916\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80916_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300205878,"sku":"80916","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348809161.jpg?v=1791582943"},{"product_id":"old-masters-gel-stain-pickling-white-half-pint","title":"Old Masters Gel Stain, Pickling White, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Pickling White, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003ePickling White \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e546 g\/L Actual\/EPA VOC, matching SDS revised 13-May-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81016_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-pickling-white-quart\"\u003ePickling White Gel Stain, Quart\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-half-pint\"\u003eSpecial Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-half-pint\"\u003eDark Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-early-american-half-pint\"\u003eEarly American\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-half-pint\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-81016-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003ePickling White half pint safety data sheet (81016, revised 13-May-2026)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300238646,"sku":"81016","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348810167.jpg?v=1791582946"},{"product_id":"old-masters-gel-stain-dark-mahogany-half-pint","title":"Old Masters Gel Stain, Dark Mahogany, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Dark Mahogany, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eDark Mahogany \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e542 g\/L Actual\/EPA VOC, matching SDS revised 26-Aug-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81116_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-quart\"\u003eDark Mahogany Gel Stain, Quart\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-half-pint\"\u003eSpecial Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-early-american-half-pint\"\u003eEarly American\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-natural-walnut-half-pint\"\u003eNatural Walnut\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-half-pint\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-81116-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eDark Mahogany half pint safety data sheet (81116, revised 26-Aug-2026)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300271414,"sku":"81116","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348811164.jpg?v=1791582949"},{"product_id":"old-masters-gel-stain-maple-half-pint","title":"Old Masters Gel Stain, Maple, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Maple, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMaple \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e543 g\/L Actual\/EPA VOC, matching SDS revised 16-Mar-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81216_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300304182,"sku":"81216","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348812161.jpg?v=1791582952"},{"product_id":"old-masters-gel-stain-cedar-half-pint","title":"Old Masters Gel Stain, Cedar, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Cedar, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eCedar \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e545 g\/L Actual\/EPA VOC, matching SDS revised 08-Apr-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81316_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300566326,"sku":"81316","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348813168.jpg?v=1791582954"},{"product_id":"old-masters-gel-stain-spanish-oak-half-pint","title":"Old Masters Gel Stain, Spanish Oak, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Spanish Oak, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSpanish Oak \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e545 g\/L Actual\/EPA VOC, matching SDS revised 22-Feb-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81416_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300631862,"sku":"81416","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348814165.jpg?v=1791582957"},{"product_id":"old-masters-gel-stain-natural-walnut-half-pint","title":"Old Masters Gel Stain, Natural Walnut, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Natural Walnut, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eNatural Walnut \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e542 g\/L Actual\/EPA VOC, matching SDS revised 22-Feb-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81616\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81616_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-natural-walnut-quart\"\u003eNatural Walnut Gel Stain, Quart\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-half-pint\"\u003eSpecial Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-half-pint\"\u003eDark Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-early-american-half-pint\"\u003eEarly American\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-half-pint\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-81616-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eNatural Walnut half pint safety data sheet (81616, revised 22-Feb-2026)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300697398,"sku":"81616","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348816169.jpg?v=1791582959"},{"product_id":"old-masters-gel-stain-pecan-half-pint","title":"Old Masters Gel Stain, Pecan, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in Pecan, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003ePecan \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L Actual\/EPA VOC, matching SDS revised 04-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81716\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81716_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300730166,"sku":"81716","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348817166.jpg?v=1791582962"},{"product_id":"old-masters-gel-stain-american-walnut-half-pint","title":"Old Masters Gel Stain, American Walnut, Half Pint","description":"\u003cp\u003eOld Masters Gel Stain in American Walnut, Half Pint, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 19–31 sq ft from this half-pint can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAmerican Walnut \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 19–31 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e547 g\/L Actual\/EPA VOC, matching SDS revised 16-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81816\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81816_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300762934,"sku":"81816","price":15.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348818163.jpg?v=1791582964"},{"product_id":"old-masters-gel-stain-natural-quart","title":"Old Masters Gel Stain, Natural, Quart","description":"\u003cp\u003eOld Masters Natural Gel Stain, Quart, is an oil-based alkyd tint base for tested wood finishing and lightening other Old Masters Gel Stain colors. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Test your intended mixture and complete protective-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eNatural can lighten other Gel Stain colors in a tested mix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eNatural \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e549 g\/L Actual\/EPA VOC, matching SDS revised 12-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80104_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan Natural lighten another Gel color?\u003c\/strong\u003e Yes. The manufacturer permits mixing any proportion; test your chosen ratio first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300795702,"sku":"80104","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348801042.jpg?v=1791582967"},{"product_id":"old-masters-gel-stain-golden-oak-quart","title":"Old Masters Gel Stain, Golden Oak, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Golden Oak, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eGolden Oak \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e541 g\/L Actual\/EPA VOC, matching SDS revised 12-Feb-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80204\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80204_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-golden-oak-half-pint\"\u003eGolden Oak Gel Stain, Half Pint\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-quart\"\u003eSpecial Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-quart\"\u003eDark Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-early-american-quart\"\u003eEarly American\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-quart\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-80204-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eGolden Oak quart safety data sheet (80204, revised 12-Feb-2026)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673300828470,"sku":"80204","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348802049.jpg?v=1791582969"},{"product_id":"old-masters-gel-stain-cherry-quart","title":"Old Masters Gel Stain, Cherry, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Cherry, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eCherry \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e545 g\/L Actual\/EPA VOC, matching SDS revised 03-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80304_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673301090614,"sku":"80304","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348803046.jpg?v=1791582972"},{"product_id":"old-masters-gel-stain-red-mahogany-quart","title":"Old Masters Gel Stain, Red Mahogany, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Red Mahogany, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eRed Mahogany \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e544 g\/L Actual\/EPA VOC, matching SDS revised 16-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80404\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80404_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673301123382,"sku":"80404","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348804043.jpg?v=1791582975"},{"product_id":"old-masters-gel-stain-provincial-quart","title":"Old Masters Gel Stain, Provincial, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Provincial, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eProvincial \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e549 g\/L Actual\/EPA VOC, matching SDS revised 01-May-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80504\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80504_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673301156150,"sku":"80504","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348805040.jpg?v=1791582976"},{"product_id":"old-masters-gel-stain-maple-quart","title":"Old Masters Gel Stain, Maple, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Maple, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMaple \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e543 g\/L Actual\/EPA VOC, matching SDS revised 16-Mar-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81204\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81204_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673301188918,"sku":"81204","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348812048.jpg?v=1791582978"},{"product_id":"old-masters-gel-stain-early-american-quart","title":"Old Masters Gel Stain, Early American, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Early American, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eEarly American \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e543 g\/L Actual\/EPA VOC, matching SDS revised 07-Apr-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80604\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80604_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-early-american-half-pint\"\u003eEarly American Gel Stain, Half Pint\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-quart\"\u003eSpecial Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-quart\"\u003eDark Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-natural-walnut-quart\"\u003eNatural Walnut\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-quart\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-80604-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eEarly American quart safety data sheet (80604, revised 07-Apr-2026)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673301221686,"sku":"80604","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348806047.jpg?v=1791582980"},{"product_id":"old-masters-gel-stain-dark-mahogany-quart","title":"Old Masters Gel Stain, Dark Mahogany, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Dark Mahogany, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eDark Mahogany \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e542 g\/L Actual\/EPA VOC, matching SDS revised 26-Aug-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81104_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-half-pint\"\u003eDark Mahogany Gel Stain, Half Pint\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-quart\"\u003eSpecial Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-early-american-quart\"\u003eEarly American\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-natural-walnut-quart\"\u003eNatural Walnut\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-quart\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-81104-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eDark Mahogany quart safety data sheet (81104, revised 26-Aug-2026)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673301352758,"sku":"81104","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348811041.jpg?v=1791582981"},{"product_id":"old-masters-gel-stain-cedar-quart","title":"Old Masters Gel Stain, Cedar, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Cedar, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eCedar \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e545 g\/L Actual\/EPA VOC, matching SDS revised 08-Apr-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81304_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673301385526,"sku":"81304","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348813045.jpg?v=1791582983"},{"product_id":"old-masters-gel-stain-dark-walnut-quart","title":"Old Masters Gel Stain, Dark Walnut, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Dark Walnut, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eDark Walnut \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e548 g\/L Actual\/EPA VOC, matching SDS revised 30-Apr-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80704\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80704_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673301418294,"sku":"80704","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348807044.jpg?v=1791582985"},{"product_id":"old-masters-gel-stain-special-walnut-quart","title":"Old Masters Gel Stain, Special Walnut, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Special Walnut, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSpecial Walnut \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e543 g\/L Actual\/EPA VOC, matching SDS revised 03-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80804_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-half-pint\"\u003eSpecial Walnut Gel Stain, Half Pint\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-quart\"\u003eDark Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-early-american-quart\"\u003eEarly American\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-natural-walnut-quart\"\u003eNatural Walnut\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-quart\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-80804-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eSpecial Walnut quart safety data sheet (80804, revised 03-Dec-2025)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673301614902,"sku":"80804","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348808041.jpg?v=1791582986"},{"product_id":"old-masters-gel-stain-spanish-oak-quart","title":"Old Masters Gel Stain, Spanish Oak, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Spanish Oak, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSpanish Oak \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e545 g\/L Actual\/EPA VOC, matching SDS revised 22-Feb-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81404\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81404_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673301942582,"sku":"81404","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348814042.jpg?v=1791582988"},{"product_id":"old-masters-gel-stain-fruitwood-quart","title":"Old Masters Gel Stain, Fruitwood, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Fruitwood, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eFruitwood \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e542 g\/L Actual\/EPA VOC, matching SDS revised 30-Apr-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e80904\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/80904_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673302499638,"sku":"80904","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348809048.jpg?v=1791582990"},{"product_id":"old-masters-gel-stain-pickling-white-quart","title":"Old Masters Gel Stain, Pickling White, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Pickling White, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003ePickling White \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e546 g\/L Actual\/EPA VOC, matching SDS revised 13-May-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81004_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-pickling-white-half-pint\"\u003ePickling White Gel Stain, Half Pint\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-quart\"\u003eSpecial Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-quart\"\u003eDark Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-early-american-quart\"\u003eEarly American\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-quart\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-81004-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003ePickling White quart safety data sheet (81004, revised 13-May-2026)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673302532406,"sku":"81004","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348810044.jpg?v=1791582991"},{"product_id":"old-masters-gel-stain-natural-walnut-quart","title":"Old Masters Gel Stain, Natural Walnut, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Natural Walnut, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eNatural Walnut \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e542 g\/L Actual\/EPA VOC, matching SDS revised 22-Feb-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81604\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81604_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/old-masters-gel-stain-natural-walnut-half-pint\"\u003eNatural Walnut Gel Stain, Half Pint\u003c\/a\u003e. Other Gel Stain colors: \u003ca href=\"\/products\/old-masters-gel-stain-special-walnut-quart\"\u003eSpecial Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-dark-mahogany-quart\"\u003eDark Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-gel-stain-early-american-quart\"\u003eEarly American\u003c\/a\u003e. Lighten or custom-mix with \u003ca href=\"\/products\/old-masters-gel-stain-natural-quart\"\u003eGel Stain Natural\u003c\/a\u003e. Topcoat with \u003ca href=\"\/products\/old-masters-oil-based-polyurethane-satin-quart\"\u003eOld Masters Oil-Based Polyurethane, Satin\u003c\/a\u003e or, after the extra 24-hour wait, \u003ca href=\"\/products\/old-masters-armor-interior-water-based-finish-satin-quart\"\u003eOld Masters Armor Interior Water-Based Finish, Satin\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/old-masters-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, read \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-use-gel-stain\"\u003ehow to use gel stain on cabinets and furniture\u003c\/a\u003e, or compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-om-gel-stain-data-sheet.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eOld Masters Gel Stain technical data sheet (revised 02\/2025)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/oldmasters-81604-a-en.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eNatural Walnut quart safety data sheet (81604, revised 22-Feb-2026)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673302794550,"sku":"81604","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348816046.jpg?v=1791582993"},{"product_id":"old-masters-gel-stain-pecan-quart","title":"Old Masters Gel Stain, Pecan, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Pecan, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003ePecan \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L Actual\/EPA VOC, matching SDS revised 04-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81704\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81704_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673302827318,"sku":"81704","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348817043.jpg?v=1791582995"},{"product_id":"old-masters-oil-based-gel-stain-818-american-walnut-quart","title":"Old Masters Oil-Based Gel Stain, 818 American Walnut, Quart","description":"\u003cp\u003e\u003cstrong\u003eOld Masters Oil-Based Gel Stain, 818 American Walnut, Quart\u003c\/strong\u003e. 818 American Walnut, Clear, Quart.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA highly pigmented gelled stain\u003c\/li\u003e\n\u003cli\u003eEasy application and better color control\u003c\/li\u003e\n\u003cli\u003eGreat for hard-to-stain wood\u003c\/li\u003e\n\u003cli\u003eWorks on pine, plywood and veneers\u003c\/li\u003e\n\u003cli\u003eClean up with mineral spirits or paint thinner\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003e818 American Walnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673302860086,"sku":"81804","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348818040.jpg?v=1791582996"},{"product_id":"old-masters-gel-stain-aged-oak-quart","title":"Old Masters Gel Stain, Aged Oak, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Aged Oak, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAged Oak \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e541 g\/L Actual\/EPA VOC, matching SDS revised 16-Dec-2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e81904\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/81904_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673302892854,"sku":"81904","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348819047.jpg?v=1791582998"},{"product_id":"old-masters-gel-stain-weathered-wood-quart","title":"Old Masters Gel Stain, Weathered Wood, Quart","description":"\u003cp\u003eOld Masters Gel Stain in Weathered Wood, Quart, adds oil-based color to prepared interior wood and compatible nonporous surfaces. For practical wood coverage, plan about 75–125 sq ft from this quart can, depending on porosity, texture and application. Its thick alkyd formula works on vertical surfaces; test your complete stain-and-clear-finish process first.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA thick gel supports control on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on difficult-to-stain wood such as pine and maple.\u003c\/li\u003e\n\u003cli\u003eCan update properly prepared existing finishes.\u003c\/li\u003e\n\u003cli\u003eGel colors can be intermixed for a tested custom shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood furniture, trim, cabinetry and compatible fiberglass, primed metal or composition surfaces. Exterior entry or garage doors require a protective exterior clear finish. Manufacturer maple and oak samples are approximate references; your surface affects appearance.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eWeathered Wood \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based alkyd gel stain \/ interior; limited exterior door use with protective finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePractical wood coverage\u003c\/th\u003e\n\u003ctd\u003eAbout 75–125 sq ft per can, scaled from TDS 300–500 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time \/ touch dry\u003c\/th\u003e\n\u003ctd\u003eGeneral drying: approximately 6–8 hours; touch dry not separately specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ full cure\u003c\/th\u003e\n\u003ctd\u003eSecond coat after 8 hours or longer, when dry \/ no full-cure duration stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eUsually 1 stain coat; optional second coat; compatible protective clear finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eBrush or soft rag on raw wood; firm synthetic brush or lint-free rag on fiberglass\/composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; use as packaged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003ePaint thinner or mineral spirits where permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e542 g\/L Actual\/EPA VOC, matching SDS revised 13-Apr-2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e82004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStart with a clean, dry surface free of wax, grease, glue and dirt. Sand wood smooth, repair defects and remove dust with a tack rag or lint-free cloth dampened with mineral spirits. Scuff sand an existing finish and remove dust. Follow lead-dust precautions before disturbing old paint.\u003c\/li\u003e\n\u003cli\u003eStir to a uniform consistency. On bare wood, apply liberally with a brush or soft rag, then remove excess along the grain. On fiberglass or composition, work one panel at a time with a firm synthetic brush or lint-free rag, feathering streaks while wet and wiping excess from the brush.\u003c\/li\u003e\n\u003cli\u003eLet dry about six to eight hours; apply an optional second coat after at least eight hours and only when dry. Ideal conditions are 70–75°F and 35–50% humidity. Temperature, humidity, airflow and excess stain can delay drying.\u003c\/li\u003e\n\u003cli\u003eUse a compatible clear finish, testing the full process first. The February 2025 TDS directs complete stain drying followed by an additional 24 hours before a water-based finish. Test lacquer compatibility. Exterior doors need an exterior clear finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e Flammable liquid and vapor; may cause allergic skin reaction, genetic defects, cancer and fertility or unborn-child harm; prolonged or repeated exposure damages organs; swallowing followed by entry into airways may be fatal. Read the \u003ca href=\"https:\/\/myoldmasters.com\/documents\/sites\/documents.vogelpaint.com\/files\/documents\/82004_AGHS_EN.pdf\"\u003eexact manufacturer-code safety sheet\u003c\/a\u003e, wear its specified protection and keep ignition sources away. Work with adequate ventilation and avoid breathing vapors. Used rags, steel wool and sanding waste can ignite spontaneously: immediately place in a sealed, water-filled metal container and dispose under local fire rules. Do not thin. Mixing Natural Gel Stain can lighten other Gel colors; test proportions.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I stain an existing finish?\u003c\/strong\u003e Yes, after scuff sanding, cleaning and a successful finish test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I thin it with water?\u003c\/strong\u003e No. The manufacturer says to use the gel as packaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a swatch match my project exactly?\u003c\/strong\u003e No. Wood species, preparation and application affect the final appearance.\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":67673304170806,"sku":"82004","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/086348820043.jpg?v=1791583000"}],"url":"https:\/\/projectweekenddiy.com\/collections\/old-masters-gel-stain.oembed","provider":"Project Weekend DIY","version":"1.0","type":"link"}