{"title":"Minwax Wipe-On Poly","description":"\u003cdiv class=\"collection-intro\"\u003e\n\u003cp\u003eMinwax Wipe-On Poly is an oil-based polyurethane you rub on with a cloth instead of brushing. Minwax says it gives a hard, clear finish with a classic hand-rubbed look and protects wood against water, household chemicals, food stains and wear, with no drips or brush marks to chase. It is made for interior wood such as furniture, cabinets, trim, doors and woodwork. We carry it in clear gloss and clear satin, in pints and quarts. Everything on this page comes from Minwax's product data sheet, product page and product guide.\u003c\/p\u003e\n\u003ch2\u003eWipe-On Poly sizes we carry\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eMinwax part #\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eClear Satin\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003ctd\u003e40910\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-quart\"\u003eClear Satin\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003ctd\u003e60910\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/minwax-wipe-on-poly-clear-gloss-pint\"\u003eClear Gloss\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003ctd\u003e40900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/minwax-wipe-on-poly-clear-gloss-quart\"\u003eClear Gloss\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003ctd\u003e60900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSpecs from Minwax\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse on\u003c\/td\u003e\n\u003ctd\u003eInterior wood: furniture, cabinets, woodwork, trim and doors. Not for refinishing floors.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eAbout 62 sq ft per pint (about 125 sq ft per quart)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoats\u003c\/td\u003e\n\u003ctd\u003e2 to 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecoat\u003c\/td\u003e\n\u003ctd\u003eAfter 2 to 3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal use\u003c\/td\u003e\n\u003ctd\u003eLet the final coat dry 24 hours (overnight) before normal use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheen\u003c\/td\u003e\n\u003ctd\u003eSatin (35 +\/- 5 at 60°) or Gloss (90 minimum at 60°)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin and cleanup\u003c\/td\u003e\n\u003ctd\u003eLinseed oil-modified polyurethane in mineral spirits; clean up with mineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC and flash point\u003c\/td\u003e\n\u003ctd\u003e600 g\/L maximum; flash point above 101°F (combustible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to apply it\u003c\/h2\u003e\n\u003cp\u003eThe wood must be dry and free of lacquer, shellac, wax, grease and polish. Sand with 220-grit paper. If you stained first, let the stain dry completely (24 hours) before the first coat. Shake the can, put a small amount on a clean, soft, lint-free cotton cloth and rub it into the wood. Let it dry at least 2 to 3 hours, sand lightly with 220-grit paper or fine steel wool, remove the dust and wipe on the next coat. Repeat for a third coat if you want more build, then let it dry overnight before use.\u003c\/p\u003e\n\u003cp\u003eMinwax notes the finish ambers slightly, which can change the look of white or pastel stains and light woods. For those, Minwax points to water-based \u003ca href=\"\/collections\/minwax-polycrylic\"\u003ePolycrylic\u003c\/a\u003e. For larger jobs you would rather brush, see \u003ca href=\"\/collections\/minwax-fast-drying-polyurethane\"\u003eFast-Drying Polyurethane\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eShop related: \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eall Minwax\u003c\/a\u003e, \u003ca href=\"\/collections\/minwax-wood-finish-stain\"\u003eMinwax Wood Finish stain\u003c\/a\u003e, \u003ca href=\"\/collections\/minwax-polyshades\"\u003ePolyShades\u003c\/a\u003e, and every brand in \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I put Wipe-On Poly over stain?\u003c\/summary\u003e\u003cp\u003eYes. Minwax says to follow the stain label and let the stain dry completely, 24 hours, before wiping on the first coat.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I sand between coats?\u003c\/summary\u003e\u003cp\u003eYes. After each coat dries 2 to 3 hours, Minwax says to sand lightly with very fine 220-grit sandpaper or fine steel wool and remove the dust before the next coat.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it on floors?\u003c\/summary\u003e\u003cp\u003eMinwax's data sheet rates Wipe-On Poly for interior wood except floors. Its product guide says the thin film can touch up small worn or scratched spots on a floor, but for new or refinished floors Minwax points to its floor polyurethanes.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eSatin or gloss?\u003c\/summary\u003e\u003cp\u003eSatin gives a soft, low sheen; gloss gives a bright, reflective shine. Both come in pints and quarts and apply the same way.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow much do I need?\u003c\/summary\u003e\u003cp\u003eMinwax lists about 62 sq ft per pint per coat. Measure the surface, multiply by the number of coats (2 to 3), and divide by 62 for pints or about 125 for quarts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I return it?\u003c\/summary\u003e\u003cp\u003eFlammable liquids like this oil-based topcoat can't be returned under our \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e, so check the sheen and size before you order. If it arrives damaged, defective or wrong, email \u003ca href=\"mailto:Store@projectweekenddiy.com\"\u003eStore@projectweekenddiy.com\u003c\/a\u003e with photos and we will make it right.\u003c\/p\u003e\u003c\/details\u003e\n\u003cp\u003eShipping is $5.99 on orders under $35 and free on orders of $35 or more, to the lower 48 states and DC (\u003ca href=\"\/policies\/shipping-policy\"\u003eshipping policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003eSources: Minwax Wipe-On Poly technical data sheet (Minwax PDS for 027426609105, dated 04\/07), Minwax Wipe-On Poly product page and the Minwax Product Guide.\u003c\/p\u003e\n\u003c\/div\u003e\n","products":[{"product_id":"minwax-wipe-on-poly-clear-gloss-pint","title":"Minwax Wipe-On Poly, Clear Gloss, Pint","description":"\u003cp\u003eMinwax Wipe-On Poly is a linseed oil modified polyurethane that you rub on with a clean, lint-free cotton cloth, so there are no drips or brush marks. Minwax says it gives a classic hand-rubbed look and a hard, clear finish that protects wood against water, household chemicals, food stains and wear. Minwax now lists this sheen as Warm Gloss; barcode 027426409002 on this can is the 1 Pint Wipe-On Poly in Minwax's current product list. It ambers slightly, so over white or pastel stains and very light wood Minwax recommends water-based \u003ca href=\"\/products\/minwax-polycrylic-protective-finish-clear-satin-half-pint\"\u003ePolycrylic Protective Finish\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear protective finish\u003c\/li\u003e\n\u003cli\u003eResists water, household chemicals, food stains and wear\u003c\/li\u003e\n\u003cli\u003eHand-rubbed look\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eFurniture, cabinets, tables, woodwork, trim and doors. Minwax rates Wipe-On Poly for all interior wood surfaces except floors.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e62 sq ft per pint (Minwax)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2-3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGloss reading (Minwax TDS)\u003c\/th\u003e\n\u003ctd\u003eGloss: 90 minimum at 60 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eLint-free cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eCan be applied over fully dried wood stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e40900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eMinwax says to shake the can thoroughly before use.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare clean, dry, sanded wood\u003c\/li\u003e\n\u003cli\u003eRub finish into wood using clean, soft, lint-free cloth\u003c\/li\u003e\n\u003cli\u003eDry 2-3 hours, sand lightly with 220 grit and remove dust\u003c\/li\u003e\n\u003cli\u003eApply second coat and optional third coat\u003c\/li\u003e\n\u003cli\u003eAllow 24 hours after final coat before light use\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eNot for floors. For floors Minwax recommends Fast-Drying Polyurethane or Super Fast-Drying Polyurethane for Floors.\u003c\/p\u003e\u003cp\u003eSafety: Flammable liquid and vapor; aspiration hazard; may cause drowsiness or dizziness and reproductive harm. Rags soaked with this finish can catch fire on their own if not disposed of properly; follow the can label. The label carries a California Prop 65 warning.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eMinwax lists 62 sq ft per pint for one coat. Wipe-On Poly goes on thin (about 0.25 mil dry per coat), so plan on 2 to 3 coats and divide the area by the number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eLet each coat dry at least 2 to 3 hours, sand lightly with 220 grit, remove the dust and wipe on the next coat. After the final coat, let it dry overnight before normal use.\u003c\/p\u003e\u003ch4\u003eCan I use Wipe-On Poly on floors?\u003c\/h4\u003e\u003cp\u003eNo. Minwax rates it for all interior wood except floors. For a floor, use \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-quart\"\u003eMinwax Fast-Drying Polyurethane\u003c\/a\u003e or another floor-rated poly from \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eHow do I prep and how long before I can use it?\u003c\/h4\u003e\u003cp\u003eThe surface must be dry and free of lacquer, shellac, wax, grease and polish. Sand with 220 grit. If you stain first, Minwax says to let the stain dry completely (24 hours on the Wipe-On Poly sheet) before the first coat. Recoat after 2 to 3 hours with a light 220 grit sanding between coats, and allow 24 hours after the final coat before light use.\u003c\/p\u003e\u003ch4\u003eWill it yellow white paint or light wood?\u003c\/h4\u003e\u003cp\u003eIt can. Minwax notes slight ambering over light colored surfaces and recommends Polycrylic for white, pastel and light wood. Test on a hidden spot first.\u003c\/p\u003e\u003cp\u003eOther sizes and sheens: \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eSatin pint\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-quart\"\u003eSatin quart\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-gloss-quart\"\u003eGloss quart\u003c\/a\u003e. Stain colors to go under it: \u003ca href=\"\/collections\/minwax-wood-finish-stain\"\u003eMinwax Wood Finish stain colors\u003c\/a\u003e. More clear coats: \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e and \u003ca href=\"\/collections\/spray-polyurethane\"\u003espray polyurethane\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.minwax.com\/en\/products\/protective-finishes\/wipe-on-poly-oil-based-polyurethane-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673282511158,"sku":"298-943","price":16.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426409002_1_0824.jpg?v=1792076220"},{"product_id":"minwax-wipe-on-poly-clear-gloss-quart","title":"Minwax Wipe-On Poly, Clear Gloss, Quart","description":"\u003cp\u003eMinwax Wipe-On Poly is a linseed oil modified polyurethane that you rub on with a clean, lint-free cotton cloth, so there are no drips or brush marks. Minwax says it gives a classic hand-rubbed look and a hard, clear finish that protects wood against water, household chemicals, food stains and wear. Minwax now lists this sheen as Warm Gloss; barcode 027426609006 on this can is the 1 Quart Wipe-On Poly in Minwax's current product list. It ambers slightly, so over white or pastel stains and very light wood Minwax recommends water-based \u003ca href=\"\/products\/minwax-polycrylic-protective-finish-clear-satin-half-pint\"\u003ePolycrylic Protective Finish\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear protective finish\u003c\/li\u003e\n\u003cli\u003eResists water, household chemicals, food stains and wear\u003c\/li\u003e\n\u003cli\u003eHand-rubbed look\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eFurniture, cabinets, tables, woodwork, trim and doors. Minwax rates Wipe-On Poly for all interior wood surfaces except floors.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 125 sq ft per quart (Minwax lists 62 sq ft per pint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2-3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGloss reading (Minwax TDS)\u003c\/th\u003e\n\u003ctd\u003eGloss: 90 minimum at 60 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eLint-free cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eCan be applied over fully dried wood stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eMinwax says to shake the can thoroughly before use.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare clean, dry, sanded wood\u003c\/li\u003e\n\u003cli\u003eRub finish into wood using clean, soft, lint-free cloth\u003c\/li\u003e\n\u003cli\u003eDry 2-3 hours, sand lightly with 220 grit and remove dust\u003c\/li\u003e\n\u003cli\u003eApply second coat and optional third coat\u003c\/li\u003e\n\u003cli\u003eAllow 24 hours after final coat before light use\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eNot for floors. For floors Minwax recommends Fast-Drying Polyurethane or Super Fast-Drying Polyurethane for Floors.\u003c\/p\u003e\u003cp\u003eSafety: Flammable liquid and vapor; aspiration hazard; may cause drowsiness or dizziness and reproductive harm. Rags soaked with this finish can catch fire on their own if not disposed of properly; follow the can label. The label carries a California Prop 65 warning.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eMinwax lists 62 sq ft per pint for one coat, about 125 sq ft per quart. Wipe-On Poly goes on thin (about 0.25 mil dry per coat), so plan on 2 to 3 coats and divide the area by the number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eLet each coat dry at least 2 to 3 hours, sand lightly with 220 grit, remove the dust and wipe on the next coat. After the final coat, let it dry overnight before normal use.\u003c\/p\u003e\u003ch4\u003eCan I use Wipe-On Poly on floors?\u003c\/h4\u003e\u003cp\u003eNo. Minwax rates it for all interior wood except floors. For a floor, use \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-quart\"\u003eMinwax Fast-Drying Polyurethane\u003c\/a\u003e or another floor-rated poly from \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eHow do I prep and how long before I can use it?\u003c\/h4\u003e\u003cp\u003eThe surface must be dry and free of lacquer, shellac, wax, grease and polish. Sand with 220 grit. If you stain first, Minwax says to let the stain dry completely (24 hours on the Wipe-On Poly sheet) before the first coat. Recoat after 2 to 3 hours with a light 220 grit sanding between coats, and allow 24 hours after the final coat before light use.\u003c\/p\u003e\u003ch4\u003eWill it yellow white paint or light wood?\u003c\/h4\u003e\u003cp\u003eIt can. Minwax notes slight ambering over light colored surfaces and recommends Polycrylic for white, pastel and light wood. Test on a hidden spot first.\u003c\/p\u003e\u003cp\u003eOther sizes and sheens: \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eSatin pint\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-quart\"\u003eSatin quart\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-gloss-pint\"\u003eGloss pint\u003c\/a\u003e. Stain colors to go under it: \u003ca href=\"\/collections\/minwax-wood-finish-stain\"\u003eMinwax Wood Finish stain colors\u003c\/a\u003e. More clear coats: \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e and \u003ca href=\"\/collections\/spray-polyurethane\"\u003espray polyurethane\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.minwax.com\/en\/products\/protective-finishes\/wipe-on-poly-oil-based-polyurethane-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673282543926,"sku":"298-950","price":25.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426609006_1_0824.jpg?v=1792076220"},{"product_id":"minwax-wipe-on-poly-clear-satin-pint","title":"Minwax Wipe-On Poly, Clear Satin, Pint","description":"\u003cp\u003eMinwax Wipe-On Poly is a linseed oil modified polyurethane that you rub on with a clean, lint-free cotton cloth, so there are no drips or brush marks. Minwax says it gives a classic hand-rubbed look and a hard, clear finish that protects wood against water, household chemicals, food stains and wear. Minwax now lists this sheen as Warm Satin; barcode 027426409101 on this can is the 1 Pint Wipe-On Poly in Minwax's current product list. It ambers slightly, so over white or pastel stains and very light wood Minwax recommends water-based \u003ca href=\"\/products\/minwax-polycrylic-protective-finish-clear-satin-half-pint\"\u003ePolycrylic Protective Finish\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear protective finish\u003c\/li\u003e\n\u003cli\u003eResists water, household chemicals, food stains and wear\u003c\/li\u003e\n\u003cli\u003eHand-rubbed look\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eFurniture, cabinets, tables, woodwork, trim and doors. Minwax rates Wipe-On Poly for all interior wood surfaces except floors.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003ePint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e62 sq ft per pint (Minwax)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2-3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGloss reading (Minwax TDS)\u003c\/th\u003e\n\u003ctd\u003eSatin: 35 plus or minus 5 at 60 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eLint-free cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eCan be applied over fully dried wood stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e40910\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eMinwax says to shake the can thoroughly before use.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare clean, dry, sanded wood\u003c\/li\u003e\n\u003cli\u003eRub finish into wood using clean, soft, lint-free cloth\u003c\/li\u003e\n\u003cli\u003eDry 2-3 hours, sand lightly with 220 grit and remove dust\u003c\/li\u003e\n\u003cli\u003eApply second coat and optional third coat\u003c\/li\u003e\n\u003cli\u003eAllow 24 hours after final coat before light use\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eNot for floors. For floors Minwax recommends Fast-Drying Polyurethane or Super Fast-Drying Polyurethane for Floors.\u003c\/p\u003e\u003cp\u003eSafety: Flammable liquid and vapor; aspiration hazard; skin sensitization; possible reproductive harm and organ damage from repeated exposure. Rags soaked with this finish can catch fire on their own if not disposed of properly; follow the can label. The label carries a California Prop 65 warning.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eMinwax lists 62 sq ft per pint for one coat. Wipe-On Poly goes on thin (about 0.25 mil dry per coat), so plan on 2 to 3 coats and divide the area by the number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eLet each coat dry at least 2 to 3 hours, sand lightly with 220 grit, remove the dust and wipe on the next coat. After the final coat, let it dry overnight before normal use.\u003c\/p\u003e\u003ch4\u003eCan I use Wipe-On Poly on floors?\u003c\/h4\u003e\u003cp\u003eNo. Minwax rates it for all interior wood except floors. For a floor, use \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-quart\"\u003eMinwax Fast-Drying Polyurethane\u003c\/a\u003e or another floor-rated poly from \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eHow do I prep and how long before I can use it?\u003c\/h4\u003e\u003cp\u003eThe surface must be dry and free of lacquer, shellac, wax, grease and polish. Sand with 220 grit. If you stain first, Minwax says to let the stain dry completely (24 hours on the Wipe-On Poly sheet) before the first coat. Recoat after 2 to 3 hours with a light 220 grit sanding between coats, and allow 24 hours after the final coat before light use.\u003c\/p\u003e\u003ch4\u003eWill it yellow white paint or light wood?\u003c\/h4\u003e\u003cp\u003eIt can. Minwax notes slight ambering over light colored surfaces and recommends Polycrylic for white, pastel and light wood. Test on a hidden spot first.\u003c\/p\u003e\u003cp\u003eOther sizes and sheens: \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-quart\"\u003eSatin quart\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-gloss-pint\"\u003eGloss pint\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-gloss-quart\"\u003eGloss quart\u003c\/a\u003e. Stain colors to go under it: \u003ca href=\"\/collections\/minwax-wood-finish-stain\"\u003eMinwax Wood Finish stain colors\u003c\/a\u003e. More clear coats: \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e and \u003ca href=\"\/collections\/spray-polyurethane\"\u003espray polyurethane\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.minwax.com\/en\/products\/protective-finishes\/wipe-on-poly-oil-based-polyurethane-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673282576694,"sku":"298-976","price":16.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426409101_1_0724.jpg?v=1791582638"},{"product_id":"minwax-wipe-on-poly-clear-satin-quart","title":"Minwax Wipe-On Poly, Clear Satin, Quart","description":"\u003cp\u003eMinwax Wipe-On Poly is a linseed oil modified polyurethane that you rub on with a clean, lint-free cotton cloth, so there are no drips or brush marks. Minwax says it gives a classic hand-rubbed look and a hard, clear finish that protects wood against water, household chemicals, food stains and wear. Minwax now lists this sheen as Warm Satin; barcode 027426609105 on this can is the 1 Quart Wipe-On Poly in Minwax's current product list. It ambers slightly, so over white or pastel stains and very light wood Minwax recommends water-based \u003ca href=\"\/products\/minwax-polycrylic-protective-finish-clear-satin-half-pint\"\u003ePolycrylic Protective Finish\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear protective finish\u003c\/li\u003e\n\u003cli\u003eResists water, household chemicals, food stains and wear\u003c\/li\u003e\n\u003cli\u003eHand-rubbed look\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eFurniture, cabinets, tables, woodwork, trim and doors. Minwax rates Wipe-On Poly for all interior wood surfaces except floors.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 125 sq ft per quart (Minwax lists 62 sq ft per pint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2-3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGloss reading (Minwax TDS)\u003c\/th\u003e\n\u003ctd\u003eSatin: 35 plus or minus 5 at 60 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eLint-free cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits or paint thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eCan be applied over fully dried wood stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e60910\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eMinwax says to shake the can thoroughly before use.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare clean, dry, sanded wood\u003c\/li\u003e\n\u003cli\u003eRub finish into wood using clean, soft, lint-free cloth\u003c\/li\u003e\n\u003cli\u003eDry 2-3 hours, sand lightly with 220 grit and remove dust\u003c\/li\u003e\n\u003cli\u003eApply second coat and optional third coat\u003c\/li\u003e\n\u003cli\u003eAllow 24 hours after final coat before light use\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eNot for floors. For floors Minwax recommends Fast-Drying Polyurethane or Super Fast-Drying Polyurethane for Floors.\u003c\/p\u003e\u003cp\u003eSafety: Flammable liquid and vapor; aspiration hazard; skin sensitization; possible reproductive harm and organ damage from repeated exposure. Rags soaked with this finish can catch fire on their own if not disposed of properly; follow the can label. The label carries a California Prop 65 warning.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eMinwax lists 62 sq ft per pint for one coat, about 125 sq ft per quart. Wipe-On Poly goes on thin (about 0.25 mil dry per coat), so plan on 2 to 3 coats and divide the area by the number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eLet each coat dry at least 2 to 3 hours, sand lightly with 220 grit, remove the dust and wipe on the next coat. After the final coat, let it dry overnight before normal use.\u003c\/p\u003e\u003ch4\u003eCan I use Wipe-On Poly on floors?\u003c\/h4\u003e\u003cp\u003eNo. Minwax rates it for all interior wood except floors. For a floor, use \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-quart\"\u003eMinwax Fast-Drying Polyurethane\u003c\/a\u003e or another floor-rated poly from \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003eHow do I prep and how long before I can use it?\u003c\/h4\u003e\u003cp\u003eThe surface must be dry and free of lacquer, shellac, wax, grease and polish. Sand with 220 grit. If you stain first, Minwax says to let the stain dry completely (24 hours on the Wipe-On Poly sheet) before the first coat. Recoat after 2 to 3 hours with a light 220 grit sanding between coats, and allow 24 hours after the final coat before light use.\u003c\/p\u003e\u003ch4\u003eWill it yellow white paint or light wood?\u003c\/h4\u003e\u003cp\u003eIt can. Minwax notes slight ambering over light colored surfaces and recommends Polycrylic for white, pastel and light wood. Test on a hidden spot first.\u003c\/p\u003e\u003cp\u003eOther sizes and sheens: \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eSatin pint\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-gloss-pint\"\u003eGloss pint\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-gloss-quart\"\u003eGloss quart\u003c\/a\u003e. Stain colors to go under it: \u003ca href=\"\/collections\/minwax-wood-finish-stain\"\u003eMinwax Wood Finish stain colors\u003c\/a\u003e. More clear coats: \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e and \u003ca href=\"\/collections\/spray-polyurethane\"\u003espray polyurethane\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.minwax.com\/en\/products\/protective-finishes\/wipe-on-poly-oil-based-polyurethane-finish\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673283395894,"sku":"298-984","price":25.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426609105_1_0824.jpg?v=1791582641"}],"url":"https:\/\/projectweekenddiy.com\/collections\/minwax-wipe-on-poly.oembed","provider":"Project Weekend DIY","version":"1.0","type":"link"}