{"title":"Minwax PolyShades Stain and Polyurethane","description":"\u003cdiv class=\"collection-intro\"\u003e\n\u003cp\u003eMinwax PolyShades combines an oil-based stain and polyurethane in one can, so you add color and a protective finish in the same step. Minwax says it can also go over an existing polyurethane finish to change the color without stripping. We carry 8 colors (Antique Walnut, Bombay Mahogany, Classic Black, Classic Oak, Honey Pine, Mission Oak, Olde Maple and Pecan) in half pints and quarts, in satin or gloss depending on the color, plus Classic Oak and Bombay Mahogany in 10.75 oz spray cans.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInterior wood only. Minwax does not recommend PolyShades for floors.\u003c\/li\u003e\n\u003cli\u003eOn raw wood, apply oil-based Minwax \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003ePre-Stain Wood Conditioner\u003c\/a\u003e first for more even color.\u003c\/li\u003e\n\u003cli\u003eSand with 220 grit along the grain and remove the dust. Stir, don't shake or thin. Apply very thin coats along the grain with a natural-bristle or foam brush. Plan on 2 to 3 coats; each coat adds color.\u003c\/li\u003e\n\u003cli\u003eRecoat after 6 hours. Rub lightly with #000 steel wool between coats and remove the dust.\u003c\/li\u003e\n\u003cli\u003eAllow 24 hours after the final coat before light use. Clean up with mineral spirits.\u003c\/li\u003e\n\u003cli\u003eFor extra protection over the color, Minwax suggests a clear coat of Fast-Drying Polyurethane or Wipe-On Poly (see \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane\u003c\/a\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eShop related: \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eall Minwax\u003c\/a\u003e, \u003ca href=\"\/collections\/minwax-wood-finish-stain\"\u003eMinwax Wood Finish stain\u003c\/a\u003e, \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e, and the \u003ca href=\"\/pages\/furniture-refinishing-project-cart\"\u003efurniture refinishing cart\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eCan PolyShades go over an existing finish?\u003c\/summary\u003e\u003cp\u003eYes, over polyurethane. Minwax says PolyShades can be used over a polyurethane finish to change its color without stripping. The Minwax data sheet says to sand a previously finished surface with 220 grit along the grain for adhesion and remove the dust first.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many coats of PolyShades do I need?\u003c\/summary\u003e\u003cp\u003eUsually 2 to 3. Each coat deepens the color, so stop when you reach the shade you want. Wait 6 hours between coats.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I get an even PolyShades finish?\u003c\/summary\u003e\u003cp\u003eMinwax calls for very thin coats brushed along the grain, with a light pass of #000 steel wool between coats. Test the color on a hidden spot first.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use PolyShades on floors?\u003c\/summary\u003e\u003cp\u003eNo. Minwax does not recommend PolyShades for floors. Use a floor-rated stain and finish instead.\u003c\/p\u003e\u003c\/details\u003e\n\u003cp\u003eFree shipping at $75. Free 30-day returns with a prepaid label on unopened cans. Sources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e and the Minwax PolyShades technical data sheet (rev. 5\/1\/2023).\u003c\/p\u003e\n\u003c\/div\u003e\n","products":[{"product_id":"minwax-polyshades-stain-and-polyurethane-classic-oak-10-75-oz","title":"Minwax PolyShades Stain \u0026 Polyurethane, Classic Oak, 10.75 oz","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Classic Oak, 10.75 oz\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStain and polyurethane in one coat\u003c\/li\u003e\n\u003cli\u003eCan change color over existing polyurethane\u003c\/li\u003e\n\u003cli\u003e14 current colors listed on product page\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood doors; Trim; Cabinetry; Furniture; Previously stained or varnished wood after prep\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClassic Oak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003e10.75 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based soya uralkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e2023 PDS states approximately 120 to 150 sq ft but labels the table sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 6 hours before handling for recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAt least 6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eTwo to three; third deepens color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle brush; Foam brush per PDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eRegionally compliant cleaner; PDS identifies mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eMaximum 550 per PDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eMay be coated with Minwax Fast-Drying Polyurethane or Wipe-On Poly for protection without more color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e31370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, grease, glue and dust; Sand bare wood smooth with 220 grit along grain; Lightly sand previously finished wood for adhesion; Oil-based Pre-Stain Wood Conditioner recommended for raw wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare wood and test color\u003c\/li\u003e\n\u003cli\u003eStir; do not shake or thin\u003c\/li\u003e\n\u003cli\u003eBrush on a very thin coat with grain\u003c\/li\u003e\n\u003cli\u003eWait at least 6 hours and rub lightly with fine steel wool; remove dust\u003c\/li\u003e\n\u003cli\u003eApply second thin coat; third if deeper color desired\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; aspiration hazard; may cause allergic skin reaction, drowsiness or dizziness, suspected cancer, and reproductive harm. SDS is for Bombay Mahogany Satin quart.\u003c\/p\u003e\u003cp\u003e: California warning for cancer and birth defects or other reproductive harm.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 2023 PDS states approximately 120 to 150 sq ft but labels the table sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is At least 6 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277137206,"sku":"293-937","price":14.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426313705.jpg?v=1792076219"},{"product_id":"minwax-polyshades-stain-and-polyurethane-bombay-mahogany-10-75-oz","title":"Minwax PolyShades Stain \u0026 Polyurethane, Bombay Mahogany, 10.75 oz","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Bombay Mahogany, 10.75 oz\u003c\/strong\u003e is intended for interior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStain and polyurethane in one coat\u003c\/li\u003e\n\u003cli\u003eCan change color over existing polyurethane\u003c\/li\u003e\n\u003cli\u003e14 current colors listed on product page\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior wood doors; Trim; Cabinetry; Furniture; Previously stained or varnished wood after prep\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eBombay Mahogany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003e10.75 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eoil-based soya uralkyd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e2023 PDS states approximately 120 to 150 sq ft but labels the table sq ft\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003eApproximately 6 hours before handling for recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eAt least 6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eTwo to three; third deepens color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle brush; Foam brush per PDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eRegionally compliant cleaner; PDS identifies mineral spirits solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eMaximum 550 per PDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eMay be coated with Minwax Fast-Drying Polyurethane or Wipe-On Poly for protection without more color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e31480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Clean and dry; remove dirt, grease, glue and dust; Sand bare wood smooth with 220 grit along grain; Lightly sand previously finished wood for adhesion; Oil-based Pre-Stain Wood Conditioner recommended for raw wood.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare wood and test color\u003c\/li\u003e\n\u003cli\u003eStir; do not shake or thin\u003c\/li\u003e\n\u003cli\u003eBrush on a very thin coat with grain\u003c\/li\u003e\n\u003cli\u003eWait at least 6 hours and rub lightly with fine steel wool; remove dust\u003c\/li\u003e\n\u003cli\u003eApply second thin coat; third if deeper color desired\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Floors.\u003c\/p\u003e\u003cp\u003eDanger: Flammable liquid and vapor; aspiration hazard; may cause allergic skin reaction, drowsiness or dizziness, and reproductive harm. SDS is for Classic Oak Gloss quart.\u003c\/p\u003e\u003cp\u003e: Soaked rags may spontaneously catch fire; California warning for cancer and reproductive harm.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 2023 PDS states approximately 120 to 150 sq ft but labels the table sq ft\/gal. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is At least 6 hours. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277169974,"sku":"293-960","price":14.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426314801.jpg?v=1791989965"},{"product_id":"minwax-polyshades-stain-and-polyurethane-honey-pine-satin-half-pint","title":"Minwax PolyShades Stain \u0026 Polyurethane, Honey Pine, Satin, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Honey Pine, Satin, Half Pint\u003c\/strong\u003e (Minwax 21310, color 1187) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The half pint suits small pieces and color tests before you buy a quart.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eHalf Pint, Honey Pine (1187), Satin (Minwax 21310, UPC 027426213104)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eSatin 25 ±5 at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 40°C (104°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Satin Finish, Honey Pine (product code 310, revised 8\/9\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of causing cancer. May damage fertility or the unborn child. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-honey-pine-satin-quart\"\u003ePolyShades Honey Pine Satin, Quart\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-honey-pine-gloss-half-pint\"\u003eHoney Pine Gloss, Half Pint\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213104-sds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Satin Finish Honey Pine, revised 8\/9\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277235510,"sku":"294-009","price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426213104.jpg?v=1791582509"},{"product_id":"minwax-polyshades-stain-and-polyurethane-pecan-satin-half-pint","title":"Minwax PolyShades Stain \u0026 Polyurethane, Pecan, Satin, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Pecan, Satin, Half Pint\u003c\/strong\u003e (Minwax 21320, color 1195) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The half pint suits small pieces and color tests before you buy a quart.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eHalf Pint, Pecan (1195), Satin (Minwax 21320, UPC 027426213203)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eSatin 25 ±5 at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 44°C (111.2°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Satin Finish, Pecan (product code 320, revised 8\/31\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of causing cancer. May damage fertility or the unborn child. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-pecan-quart\"\u003ePolyShades Pecan Satin, Quart\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-pecan-gloss-half-pint\"\u003ePecan Gloss, Half Pint\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213203-sds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Satin Finish Pecan, revised 8\/31\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277268278,"sku":"294-017","price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426213203.jpg?v=1791582511"},{"product_id":"minwax-polyshades-stain-and-polyurethane-olde-maple-half-pint","title":"Minwax PolyShades Stain \u0026 Polyurethane, Olde Maple, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Olde Maple, Satin, Half Pint\u003c\/strong\u003e (Minwax 21330, color 1182) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The half pint suits small pieces and color tests before you buy a quart.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eHalf Pint, Olde Maple (1182), Satin (Minwax 21330, UPC 027426213302)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eSatin 25 ±5 at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 40°C (104°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Satin Finish, Olde Maple (product code 330, revised 8\/31\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of causing cancer. May damage fertility or the unborn child. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-olde-maple-quart\"\u003ePolyShades Olde Maple Satin, Quart\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213302-sds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Satin Finish Olde Maple, revised 8\/31\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277333814,"sku":"294-025","price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426213302.jpg?v=1791582513"},{"product_id":"minwax-polyshades-stain-and-polyurethane-antique-walnut-half-pint","title":"Minwax PolyShades Stain \u0026 Polyurethane, Antique Walnut Satin, Half Pint","description":"\u003cp\u003eMinwax PolyShades in Antique Walnut (color 1188), Satin, Half Pint, combines stain and polyurethane in one step. Each coat adds color and protection while showing the wood grain, which cuts finishing time compared with staining and then topcoating. Minwax notes it can go over existing polyurethane finishes, so you can change the color of finished wood without stripping. It is made for interior wood doors, trim, cabinetry and furniture and is not recommended for floors. The half pint suits small pieces and testing the color before buying a quart.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStain and satin polyurethane in one can\u003c\/li\u003e\n\u003cli\u003eRecolor previously finished wood without stripping\u003c\/li\u003e\n\u003cli\u003eAbout 120 to 150 sq ft per quart (about 30 to 37 sq ft per half pint) (Minwax product page)\u003c\/li\u003e\n\u003cli\u003eRecoat in 6 hours; 2 coats recommended, a third deepens color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eAntique Walnut (1188)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based soya uralkyd stain and polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood; not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120 to 150 sq ft per quart (about 30 to 37 sq ft per half pint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2, or 3 for deeper color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e6 hours or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use\u003c\/th\u003e\n\u003ctd\u003e24 hours after the final coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eFoam or natural bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; do not shake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e21340 (UPC 027426213401)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSources\u003c\/th\u003e\n\u003ctd\u003eMinwax PolyShades product page; Minwax PolyShades PDS (rev. 5\/1\/2023); Minwax SDS, Interior Stain \u0026amp; Polyurethane Satin Finish (rev. 8\/31\/2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStart with clean, dry wood. Sand with 220 grit in the direction of the grain and remove dust. Sand new or raw wood until smooth; lightly sand previously finished wood so the new coat bonds.\u003c\/li\u003e\n\u003cli\u003eOn new or raw wood, apply Minwax Pre-Stain Wood Conditioner for more even color.\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eBrush on a very thin coat with the grain using a foam or natural bristle brush.\u003c\/li\u003e\n\u003cli\u003eLet it dry 6 hours or more, rub lightly with 000 or finer steel wool, remove the dust and apply a second thin coat. Add a third coat to darken the color.\u003c\/li\u003e\n\u003cli\u003eFor extra protection without more color, finish with a coat of Minwax Fast-Drying Polyurethane or Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThin coats matter with a one-step stain and finish: heavy coats can look uneven and dry slowly. Rags, steel wool and sanding residue soaked with this product can catch fire on their own: put them in a sealed, water-filled metal container and dispose of them under local fire rules.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eBigger size: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-antique-walnut-quart\"\u003ePolyShades Antique Walnut Quart\u003c\/a\u003e. Another color: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-bombay-mahogany-half-pint\"\u003eBombay Mahogany Half Pint\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e. Manufacturer details: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277432118,"sku":"294-033","price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426213401.jpg?v=1791582515"},{"product_id":"minwax-polyshades-stain-and-polyurethane-classic-oak-satin-half-pint","title":"Minwax PolyShades Stain \u0026 Polyurethane, Classic Oak, Satin, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Classic Oak, Satin, Half Pint\u003c\/strong\u003e (Minwax 21370, color 1191) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The half pint suits small pieces and color tests before you buy a quart.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eHalf Pint, Classic Oak (1191), Satin (Minwax 21370, UPC 027426213708)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eSatin 25 ±5 at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 40°C (104°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Satin Finish, Classic Oak (product code 370, revised 8\/31\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of causing cancer. May damage fertility or the unborn child. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-classic-oak-satin-quart\"\u003ePolyShades Classic Oak Satin, Quart\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-classic-oak-gloss-half-pint\"\u003eClassic Oak Gloss, Half Pint\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-sds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Satin Finish Classic Oak, revised 8\/31\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277464886,"sku":"294-066","price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426213708.jpg?v=1791582517"},{"product_id":"minwax-polyshades-stain-and-polyurethane-bombay-mahogany-half-pint","title":"Minwax PolyShades Stain \u0026 Polyurethane, Bombay Mahogany Satin, Half Pint","description":"\u003cp\u003eMinwax PolyShades in Bombay Mahogany (color 1192), Satin, Half Pint, combines stain and polyurethane in one step. Each coat adds color and protection while showing the wood grain, which cuts finishing time compared with staining and then topcoating. Minwax notes it can go over existing polyurethane finishes, so you can change the color of finished wood without stripping. It is made for interior wood doors, trim, cabinetry and furniture and is not recommended for floors. The half pint suits small pieces and testing the color before buying a quart.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStain and satin polyurethane in one can\u003c\/li\u003e\n\u003cli\u003eRecolor previously finished wood without stripping\u003c\/li\u003e\n\u003cli\u003eAbout 120 to 150 sq ft per quart (about 30 to 37 sq ft per half pint) (Minwax product page)\u003c\/li\u003e\n\u003cli\u003eRecoat in 6 hours; 2 coats recommended, a third deepens color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBombay Mahogany (1192)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eHalf Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based soya uralkyd stain and polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood; not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120 to 150 sq ft per quart (about 30 to 37 sq ft per half pint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2, or 3 for deeper color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e6 hours or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use\u003c\/th\u003e\n\u003ctd\u003e24 hours after the final coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eFoam or natural bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; do not shake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e21380 (UPC 027426213807)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSources\u003c\/th\u003e\n\u003ctd\u003eMinwax PolyShades product page; Minwax PolyShades PDS (rev. 5\/1\/2023); Minwax SDS, Interior Stain \u0026amp; Polyurethane Satin Finish (rev. 8\/9\/2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStart with clean, dry wood. Sand with 220 grit in the direction of the grain and remove dust. Sand new or raw wood until smooth; lightly sand previously finished wood so the new coat bonds.\u003c\/li\u003e\n\u003cli\u003eOn new or raw wood, apply Minwax Pre-Stain Wood Conditioner for more even color.\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eBrush on a very thin coat with the grain using a foam or natural bristle brush.\u003c\/li\u003e\n\u003cli\u003eLet it dry 6 hours or more, rub lightly with 000 or finer steel wool, remove the dust and apply a second thin coat. Add a third coat to darken the color.\u003c\/li\u003e\n\u003cli\u003eFor extra protection without more color, finish with a coat of Minwax Fast-Drying Polyurethane or Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThin coats matter with a one-step stain and finish: heavy coats can look uneven and dry slowly. Rags, steel wool and sanding residue soaked with this product can catch fire on their own: put them in a sealed, water-filled metal container and dispose of them under local fire rules.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eBigger size: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-bombay-mahogany-quart\"\u003ePolyShades Bombay Mahogany Quart\u003c\/a\u003e. Another color: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-antique-walnut-half-pint\"\u003eAntique Walnut Half Pint\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e. Manufacturer details: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277497654,"sku":"294-074","price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426213807.jpg?v=1791582519"},{"product_id":"minwax-polyshades-stain-and-polyurethane-honey-pine-gloss-half-pint","title":"Minwax PolyShades Stain \u0026 Polyurethane, Honey Pine, Gloss, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Honey Pine, Gloss, Half Pint\u003c\/strong\u003e (Minwax 21410, color 1187) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The half pint suits small pieces and color tests before you buy a quart.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eHalf Pint, Honey Pine (1187), Gloss (Minwax 21410, UPC 027426214101)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eGloss 90 minimum at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 40°C (104°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Gloss Finish, Honey Pine (product code 410, revised 8\/31\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. May damage fertility or the unborn child. Unlike the satin PolyShades SDS sheets, this gloss SDS does not list a carcinogenicity classification. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-honey-pine-gloss-quart\"\u003ePolyShades Honey Pine Gloss, Quart\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-honey-pine-satin-half-pint\"\u003eHoney Pine Satin, Half Pint\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426214101-sds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Gloss Finish Honey Pine, revised 8\/31\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277759798,"sku":"294-108","price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426214101.jpg?v=1791582521"},{"product_id":"minwax-polyshades-stain-and-polyurethane-pecan-gloss-half-pint","title":"Minwax PolyShades Stain \u0026 Polyurethane, Pecan, Gloss, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Pecan, Gloss, Half Pint\u003c\/strong\u003e (Minwax 21420, color 1195) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The half pint suits small pieces and color tests before you buy a quart.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eHalf Pint, Pecan (1195), Gloss (Minwax 21420, UPC 027426214200)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eGloss 90 minimum at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 40°C (104°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Gloss Finish, Pecan (product code 420, revised 8\/31\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. May damage fertility or the unborn child. Unlike the satin PolyShades SDS sheets, this gloss SDS does not list a carcinogenicity classification. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-pecan-satin-half-pint\"\u003ePecan Satin, Half Pint\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426214200-sds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Gloss Finish Pecan, revised 8\/31\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277792566,"sku":"294-116","price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426214200.jpg?v=1791582523"},{"product_id":"minwax-polyshades-stain-and-polyurethane-classic-oak-gloss-half-pint","title":"Minwax PolyShades Stain \u0026 Polyurethane, Classic Oak, Gloss, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Classic Oak, Gloss, Half Pint\u003c\/strong\u003e (Minwax 21470, color 1191) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The half pint suits small pieces and color tests before you buy a quart.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eHalf Pint, Classic Oak (1191), Gloss (Minwax 21470, UPC 027426214705)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eGloss 90 minimum at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 40°C (104°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Gloss Finish, Classic Oak (product code 470, revised 8\/9\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. May damage fertility or the unborn child. Unlike the satin PolyShades SDS sheets, this gloss SDS does not list a carcinogenicity classification. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-classic-oak-gloss-quart\"\u003ePolyShades Classic Oak Gloss, Quart\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-classic-oak-satin-half-pint\"\u003eClassic Oak Satin, Half Pint\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426214705-sds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Gloss Finish Classic Oak, revised 8\/9\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277825334,"sku":"294-165","price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426214705.jpg?v=1791582525"},{"product_id":"minwax-polyshades-stain-and-polyurethane-classic-black-half-pint","title":"Minwax PolyShades Stain \u0026 Polyurethane, Classic Black, Half Pint","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Classic Black, Satin, Half Pint\u003c\/strong\u003e (Minwax 21395, color 1185) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The half pint suits small pieces and color tests before you buy a quart.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eHalf Pint, Classic Black (1185), Satin (Minwax 21395, UPC 027426213951)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eSatin 25 ±5 at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 41°C (105.8°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Satin Finish, Classic Black (product code 395, revised 8\/31\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of causing cancer. May damage fertility or the unborn child. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-classic-black-quart\"\u003ePolyShades Classic Black Satin, Quart\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213951-sds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Satin Finish Classic Black, revised 8\/31\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277858102,"sku":"294-231","price":17.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426213951.jpg?v=1791582527"},{"product_id":"minwax-polyshades-stain-and-polyurethane-mission-oak-quart","title":"Minwax PolyShades Stain \u0026 Polyurethane, Mission Oak Satin, Quart","description":"\u003cp\u003eMinwax PolyShades in Mission Oak (color 1193), Satin, Quart, combines stain and polyurethane in one step. Each coat adds color and protection while showing the wood grain, which cuts finishing time compared with staining and then topcoating. Minwax notes it can go over existing polyurethane finishes, so you can change the color of finished wood without stripping. It is made for interior wood doors, trim, cabinetry and furniture and is not recommended for floors.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStain and satin polyurethane in one can\u003c\/li\u003e\n\u003cli\u003eRecolor previously finished wood without stripping\u003c\/li\u003e\n\u003cli\u003eAbout 120 to 150 sq ft per quart (Minwax product page)\u003c\/li\u003e\n\u003cli\u003eRecoat in 6 hours; 2 coats recommended, a third deepens color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eMission Oak (1193)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based soya uralkyd stain and polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood; not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120 to 150 sq ft per quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2, or 3 for deeper color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e6 hours or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use\u003c\/th\u003e\n\u003ctd\u003e24 hours after the final coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eFoam or natural bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; do not shake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61385 (UPC 027426613850)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSources\u003c\/th\u003e\n\u003ctd\u003eMinwax PolyShades product page; Minwax PolyShades PDS (rev. 5\/1\/2023)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStart with clean, dry wood. Sand with 220 grit in the direction of the grain and remove dust. Sand new or raw wood until smooth; lightly sand previously finished wood so the new coat bonds.\u003c\/li\u003e\n\u003cli\u003eOn new or raw wood, apply Minwax Pre-Stain Wood Conditioner for more even color.\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eBrush on a very thin coat with the grain using a foam or natural bristle brush.\u003c\/li\u003e\n\u003cli\u003eLet it dry 6 hours or more, rub lightly with 000 or finer steel wool, remove the dust and apply a second thin coat. Add a third coat to darken the color.\u003c\/li\u003e\n\u003cli\u003eFor extra protection without more color, finish with a coat of Minwax Fast-Drying Polyurethane or Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThin coats matter with a one-step stain and finish: heavy coats can look uneven and dry slowly. Rags, steel wool and sanding residue soaked with this product can catch fire on their own: put them in a sealed, water-filled metal container and dispose of them under local fire rules.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eAnother color: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-pecan-quart\"\u003ePolyShades Pecan Quart\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e. Manufacturer details: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277890870,"sku":"294-462","price":38.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426613850.jpg?v=1791582528"},{"product_id":"minwax-polyshades-stain-and-polyurethane-classic-black-quart","title":"Minwax PolyShades Stain \u0026 Polyurethane, Classic Black, Quart","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Classic Black, Satin, Quart\u003c\/strong\u003e (Minwax 61395, color 1185) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The quart covers larger pieces such as doors and cabinet runs.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eQuart, Classic Black (1185), Satin (Minwax 61395, UPC 027426613959)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eSatin 25 ±5 at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 41°C (105.8°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Satin Finish, Classic Black (product code 395, revised 8\/31\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of causing cancer. May damage fertility or the unborn child. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-classic-black-half-pint\"\u003ePolyShades Classic Black Satin, Half Pint\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426613959-sds.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Satin Finish Classic Black, revised 8\/31\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277923638,"sku":"294-488","price":38.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426613959.jpg?v=1792076220"},{"product_id":"minwax-polyshades-stain-and-polyurethane-honey-pine-satin-quart","title":"Minwax PolyShades Stain \u0026 Polyurethane, Honey Pine Satin, Quart","description":"\u003cp\u003eMinwax PolyShades in Honey Pine (color 1187), Satin, Quart, combines stain and polyurethane in one step. Each coat adds color and protection while showing the wood grain, which cuts finishing time compared with staining and then topcoating. Minwax notes it can go over existing polyurethane finishes, so you can change the color of finished wood without stripping. It is made for interior wood doors, trim, cabinetry and furniture and is not recommended for floors.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStain and satin polyurethane in one can\u003c\/li\u003e\n\u003cli\u003eRecolor previously finished wood without stripping\u003c\/li\u003e\n\u003cli\u003eAbout 120 to 150 sq ft per quart (Minwax product page)\u003c\/li\u003e\n\u003cli\u003eRecoat in 6 hours; 2 coats recommended, a third deepens color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eHoney Pine (1187)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based soya uralkyd stain and polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood; not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120 to 150 sq ft per quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2, or 3 for deeper color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e6 hours or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use\u003c\/th\u003e\n\u003ctd\u003e24 hours after the final coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eFoam or natural bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; do not shake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61310 (UPC 027426613102)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSources\u003c\/th\u003e\n\u003ctd\u003eMinwax PolyShades product page; Minwax PolyShades PDS (rev. 5\/1\/2023); Minwax SDS, Interior Stain \u0026amp; Polyurethane Satin Finish (rev. 8\/9\/2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStart with clean, dry wood. Sand with 220 grit in the direction of the grain and remove dust. Sand new or raw wood until smooth; lightly sand previously finished wood so the new coat bonds.\u003c\/li\u003e\n\u003cli\u003eOn new or raw wood, apply Minwax Pre-Stain Wood Conditioner for more even color.\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eBrush on a very thin coat with the grain using a foam or natural bristle brush.\u003c\/li\u003e\n\u003cli\u003eLet it dry 6 hours or more, rub lightly with 000 or finer steel wool, remove the dust and apply a second thin coat. Add a third coat to darken the color.\u003c\/li\u003e\n\u003cli\u003eFor extra protection without more color, finish with a coat of Minwax Fast-Drying Polyurethane or Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThin coats matter with a one-step stain and finish: heavy coats can look uneven and dry slowly. Rags, steel wool and sanding residue soaked with this product can catch fire on their own: put them in a sealed, water-filled metal container and dispose of them under local fire rules.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eOther colors: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-pecan-quart\"\u003ePecan\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-antique-walnut-quart\"\u003eAntique Walnut\u003c\/a\u003e and \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-mission-oak-quart\"\u003eMission Oak\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e. Manufacturer details: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277956406,"sku":"294-504","price":38.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426613102.jpg?v=1791582532"},{"product_id":"minwax-polyshades-stain-and-polyurethane-pecan-quart","title":"Minwax PolyShades Stain \u0026 Polyurethane, Pecan Satin, Quart","description":"\u003cp\u003eMinwax PolyShades in Pecan (color 1195), Satin, Quart, combines stain and polyurethane in one step. Each coat adds color and protection while showing the wood grain, which cuts finishing time compared with staining and then topcoating. Minwax notes it can go over existing polyurethane finishes, so you can change the color of finished wood without stripping. It is made for interior wood doors, trim, cabinetry and furniture and is not recommended for floors.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStain and satin polyurethane in one can\u003c\/li\u003e\n\u003cli\u003eRecolor previously finished wood without stripping\u003c\/li\u003e\n\u003cli\u003eAbout 120 to 150 sq ft per quart (Minwax product page)\u003c\/li\u003e\n\u003cli\u003eRecoat in 6 hours; 2 coats recommended, a third deepens color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003ePecan (1195)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based soya uralkyd stain and polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood; not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120 to 150 sq ft per quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2, or 3 for deeper color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e6 hours or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use\u003c\/th\u003e\n\u003ctd\u003e24 hours after the final coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eFoam or natural bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; do not shake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61320 (UPC 027426613201)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSources\u003c\/th\u003e\n\u003ctd\u003eMinwax PolyShades product page; Minwax PolyShades PDS (rev. 5\/1\/2023)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStart with clean, dry wood. Sand with 220 grit in the direction of the grain and remove dust. Sand new or raw wood until smooth; lightly sand previously finished wood so the new coat bonds.\u003c\/li\u003e\n\u003cli\u003eOn new or raw wood, apply Minwax Pre-Stain Wood Conditioner for more even color.\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eBrush on a very thin coat with the grain using a foam or natural bristle brush.\u003c\/li\u003e\n\u003cli\u003eLet it dry 6 hours or more, rub lightly with 000 or finer steel wool, remove the dust and apply a second thin coat. Add a third coat to darken the color.\u003c\/li\u003e\n\u003cli\u003eFor extra protection without more color, finish with a coat of Minwax Fast-Drying Polyurethane or Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThin coats matter with a one-step stain and finish: heavy coats can look uneven and dry slowly. Rags, steel wool and sanding residue soaked with this product can catch fire on their own: put them in a sealed, water-filled metal container and dispose of them under local fire rules.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eAnother color: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-mission-oak-quart\"\u003ePolyShades Mission Oak Quart\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e. Manufacturer details: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673277989174,"sku":"294-512","price":38.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426613201.jpg?v=1791582534"},{"product_id":"minwax-polyshades-stain-and-polyurethane-olde-maple-quart","title":"Minwax PolyShades Stain \u0026 Polyurethane, Olde Maple, Quart","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Olde Maple, Satin, Quart\u003c\/strong\u003e (Minwax 61330, color 1182) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The quart covers larger pieces such as doors and cabinet runs.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eQuart, Olde Maple (1182), Satin (Minwax 61330, UPC 027426613300)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eSatin 25 ±5 at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 40°C (104°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Satin Finish, Olde Maple (product code 330, revised 8\/31\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of causing cancer. May damage fertility or the unborn child. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-olde-maple-half-pint\"\u003ePolyShades Olde Maple Satin, Half Pint\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426613300-sds.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Satin Finish Olde Maple, revised 8\/31\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673278153014,"sku":"294-520","price":38.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426613300.jpg?v=1791582535"},{"product_id":"minwax-polyshades-stain-and-polyurethane-antique-walnut-quart","title":"Minwax PolyShades Stain \u0026 Polyurethane, Antique Walnut Satin, Quart","description":"\u003cp\u003eMinwax PolyShades in Antique Walnut (color 1188), Satin, Quart, combines stain and polyurethane in one step. Each coat adds color and protection while showing the wood grain, which cuts finishing time compared with staining and then topcoating. Minwax notes it can go over existing polyurethane finishes, so you can change the color of finished wood without stripping. It is made for interior wood doors, trim, cabinetry and furniture and is not recommended for floors.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStain and satin polyurethane in one can\u003c\/li\u003e\n\u003cli\u003eRecolor previously finished wood without stripping\u003c\/li\u003e\n\u003cli\u003eAbout 120 to 150 sq ft per quart (Minwax product page)\u003c\/li\u003e\n\u003cli\u003eRecoat in 6 hours; 2 coats recommended, a third deepens color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eAntique Walnut (1188)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based soya uralkyd stain and polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood; not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120 to 150 sq ft per quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2, or 3 for deeper color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e6 hours or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use\u003c\/th\u003e\n\u003ctd\u003e24 hours after the final coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eFoam or natural bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; do not shake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61340 (UPC 027426613409)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSources\u003c\/th\u003e\n\u003ctd\u003eMinwax PolyShades product page; Minwax PolyShades PDS (rev. 5\/1\/2023); Minwax SDS, Interior Stain \u0026amp; Polyurethane Satin Finish (rev. 8\/31\/2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStart with clean, dry wood. Sand with 220 grit in the direction of the grain and remove dust. Sand new or raw wood until smooth; lightly sand previously finished wood so the new coat bonds.\u003c\/li\u003e\n\u003cli\u003eOn new or raw wood, apply Minwax Pre-Stain Wood Conditioner for more even color.\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eBrush on a very thin coat with the grain using a foam or natural bristle brush.\u003c\/li\u003e\n\u003cli\u003eLet it dry 6 hours or more, rub lightly with 000 or finer steel wool, remove the dust and apply a second thin coat. Add a third coat to darken the color.\u003c\/li\u003e\n\u003cli\u003eFor extra protection without more color, finish with a coat of Minwax Fast-Drying Polyurethane or Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThin coats matter with a one-step stain and finish: heavy coats can look uneven and dry slowly. Rags, steel wool and sanding residue soaked with this product can catch fire on their own: put them in a sealed, water-filled metal container and dispose of them under local fire rules.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSmaller size: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-antique-walnut-half-pint\"\u003ePolyShades Antique Walnut Half Pint\u003c\/a\u003e. Other colors: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-bombay-mahogany-quart\"\u003eBombay Mahogany\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-mission-oak-quart\"\u003eMission Oak\u003c\/a\u003e and \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-honey-pine-satin-quart\"\u003eHoney Pine\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e. Manufacturer details: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673278185782,"sku":"294-538","price":38.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426613409.jpg?v=1791582537"},{"product_id":"minwax-polyshades-stain-and-polyurethane-classic-oak-satin-quart","title":"Minwax PolyShades Stain \u0026 Polyurethane, Classic Oak, Satin, Quart","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Classic Oak, Satin, Quart\u003c\/strong\u003e (Minwax 61370, color 1191) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The quart covers larger pieces such as doors and cabinet runs.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eQuart, Classic Oak (1191), Satin (Minwax 61370, UPC 027426613706)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eSatin 25 ±5 at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 40°C (104°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Satin Finish, Classic Oak (product code 370, revised 8\/31\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of causing cancer. May damage fertility or the unborn child. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-classic-oak-satin-half-pint\"\u003ePolyShades Classic Oak Satin, Half Pint\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-classic-oak-gloss-quart\"\u003eClassic Oak Gloss, Quart\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426613706-sds.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Satin Finish Classic Oak, revised 8\/31\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673278218550,"sku":"294-561","price":38.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426613706.jpg?v=1792076220"},{"product_id":"minwax-polyshades-stain-and-polyurethane-bombay-mahogany-quart","title":"Minwax PolyShades Stain \u0026 Polyurethane, Bombay Mahogany Satin, Quart","description":"\u003cp\u003eMinwax PolyShades in Bombay Mahogany (color 1192), Satin, Quart, combines stain and polyurethane in one step. Each coat adds color and protection while showing the wood grain, which cuts finishing time compared with staining and then topcoating. Minwax notes it can go over existing polyurethane finishes, so you can change the color of finished wood without stripping. It is made for interior wood doors, trim, cabinetry and furniture and is not recommended for floors.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStain and satin polyurethane in one can\u003c\/li\u003e\n\u003cli\u003eRecolor previously finished wood without stripping\u003c\/li\u003e\n\u003cli\u003eAbout 120 to 150 sq ft per quart (Minwax product page)\u003c\/li\u003e\n\u003cli\u003eRecoat in 6 hours; 2 coats recommended, a third deepens color\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBombay Mahogany (1192)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eQuart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based soya uralkyd stain and polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood; not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120 to 150 sq ft per quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2, or 3 for deeper color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e6 hours or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight use\u003c\/th\u003e\n\u003ctd\u003e24 hours after the final coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eFoam or natural bristle brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDo not thin; do not shake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003e61380 (UPC 027426613805)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSources\u003c\/th\u003e\n\u003ctd\u003eMinwax PolyShades product page; Minwax PolyShades PDS (rev. 5\/1\/2023); Minwax SDS, Interior Stain \u0026amp; Polyurethane Satin Finish (rev. 8\/9\/2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStart with clean, dry wood. Sand with 220 grit in the direction of the grain and remove dust. Sand new or raw wood until smooth; lightly sand previously finished wood so the new coat bonds.\u003c\/li\u003e\n\u003cli\u003eOn new or raw wood, apply Minwax Pre-Stain Wood Conditioner for more even color.\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eBrush on a very thin coat with the grain using a foam or natural bristle brush.\u003c\/li\u003e\n\u003cli\u003eLet it dry 6 hours or more, rub lightly with 000 or finer steel wool, remove the dust and apply a second thin coat. Add a third coat to darken the color.\u003c\/li\u003e\n\u003cli\u003eFor extra protection without more color, finish with a coat of Minwax Fast-Drying Polyurethane or Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThin coats matter with a one-step stain and finish: heavy coats can look uneven and dry slowly. Rags, steel wool and sanding residue soaked with this product can catch fire on their own: put them in a sealed, water-filled metal container and dispose of them under local fire rules.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSmaller size: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-bombay-mahogany-half-pint\"\u003ePolyShades Bombay Mahogany Half Pint\u003c\/a\u003e. Other colors: \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-antique-walnut-quart\"\u003eAntique Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-pecan-quart\"\u003ePecan\u003c\/a\u003e and \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-mission-oak-quart\"\u003eMission Oak\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e. Manufacturer details: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673278284086,"sku":"294-579","price":38.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426613805.jpg?v=1791582542"},{"product_id":"minwax-polyshades-stain-and-polyurethane-honey-pine-gloss-quart","title":"Minwax PolyShades Stain \u0026 Polyurethane, Honey Pine, Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Honey Pine, Gloss, Quart\u003c\/strong\u003e (Minwax 61410, color 1187) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The quart covers larger pieces such as doors and cabinet runs.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eQuart, Honey Pine (1187), Gloss (Minwax 61410, UPC 027426614109)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eGloss 90 minimum at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 40°C (104°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Gloss Finish, Honey Pine (product code 410, revised 8\/31\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. May damage fertility or the unborn child. Unlike the satin PolyShades SDS sheets, this gloss SDS does not list a carcinogenicity classification. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-honey-pine-gloss-half-pint\"\u003ePolyShades Honey Pine Gloss, Half Pint\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-honey-pine-satin-quart\"\u003eHoney Pine Satin, Quart\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426614109-sds.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Gloss Finish Honey Pine, revised 8\/31\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673278316854,"sku":"294-603","price":38.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426614109.jpg?v=1791582543"},{"product_id":"minwax-polyshades-stain-and-polyurethane-classic-oak-gloss-quart","title":"Minwax PolyShades Stain \u0026 Polyurethane, Classic Oak, Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eMinwax PolyShades Stain \u0026amp; Polyurethane, Classic Oak, Gloss, Quart\u003c\/strong\u003e (Minwax 61470, color 1191) combines stain and polyurethane in one step. Minwax says each coat gives rich color and lasting protection while enhancing the wood grain, which cuts finishing time compared with staining and then topcoating. It can also go over existing polyurethane or varnish to change the color of finished wood without stripping. Minwax lists it for wood doors, trim, cabinetry and furniture, including already-finished wood. It is for interior use and not recommended for floors. The quart covers larger pieces such as doors and cabinet runs.\u003c\/p\u003e\n\u003ch3\u003eSpecs (Minwax PolyShades product page and Product Data Sheet, rev 5\/1\/2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize, color, sheen\u003c\/th\u003e\n\u003ctd\u003eQuart, Classic Oak (1191), Gloss (Minwax 61470, UPC 027426614703)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-based one-step stain and polyurethane; soya uralkyd resin, mineral spirits solvent (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpacity\u003c\/th\u003e\n\u003ctd\u003eSemi-transparent (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior wood doors, trim, cabinetry and furniture, including already-finished wood. Not for floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eProduct page: 120-150 sq ft per quart. The PDS lists approx. 120-150 sq ft under a sq ft\/gal heading, so we show the product page figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eProduct page: 2 recommended. PDS: 2-3; a third coat deepens the color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eRecoat after 6 hours (page and PDS); light use 24 hours after the final coat (PDS). Product page dry-time range: 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen (luster)\u003c\/th\u003e\n\u003ctd\u003eGloss 90 minimum at 60° (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eNatural bristle or foam brush (PDS). Do not shake or thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eProduct page: mineral spirits. PDS: regionally compliant cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L maximum (PDS). Half pints and quarts are exempt from PWD's 250 g\/L carry rule, which applies above quart size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids \/ weight\u003c\/th\u003e\n\u003ctd\u003e37.5-41.5% solids; 7.2 lb\/gal; 1 mil dry film per coat (PDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ePDS: over 105°F (Setaflash). SDS: 40°C (104°F) (Pensky-Martens closed cup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStripped, unstained or raw wood: the surface must be dry, clean and free of dirt, grease and glue. Sand with the grain using #220 sandpaper until smooth and remove all dust. Pretreat with oil-based Minwax Pre-Stain Wood Conditioner for more even color. Previously finished wood that is not being stripped: clean and dry, then lightly sand so the new coat bonds (PDS).\u003c\/li\u003e\n\u003cli\u003eTest the color on a hidden spot. Stir well before and during use; do not shake or thin.\u003c\/li\u003e\n\u003cli\u003eDip a natural bristle brush about an inch into the can and tap off the excess. Brush a very thin, even coat with the grain and keep a wet edge. To reduce brush marks and bubbles, tip off by lightly running the bristles over the full length at a 45° angle.\u003c\/li\u003e\n\u003cli\u003eLet the first coat dry 6 hours or more. Rub lightly with 000 or finer steel wool, remove all dust and brush on a second thin coat. Apply a third coat to deepen the color.\u003c\/li\u003e\n\u003cli\u003eFor more protection without more color, add a coat of Minwax Fast-Drying Polyurethane or Minwax Wipe-On Poly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin coats matter with a one-step stain and finish. Minwax says dry time runs longer in high humidity, low temperatures, poor ventilation or when a coat goes on too thick.\u003c\/li\u003e\n\u003cli\u003eMinwax currently lists 14 PolyShades colors in Satin and Gloss, in half pint and quart cans. Colors on screen are for reference only, so always test first.\u003c\/li\u003e\n\u003cli\u003eSanding, scraping or removing old paint can create lead dust or fumes; see the lead warning on the label and PDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe Minwax SDS for PolyShades Interior Stain \u0026amp; Polyurethane Gloss Finish, Classic Oak (product code 470, revised 8\/9\/2026) carries the signal word Danger: Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause drowsiness or dizziness. May damage fertility or the unborn child. Unlike the satin PolyShades SDS sheets, this gloss SDS does not list a carcinogenicity classification. Rags, steel wool, other waste soaked with this product and sanding residue can catch fire on their own if discarded improperly: put them in a sealed, water-filled metal container and dispose of them under local fire rules. The label and SDS carry a California Prop 65 warning for cancer and birth defects or other reproductive harm. Use only with adequate ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-classic-oak-gloss-half-pint\"\u003ePolyShades Classic Oak Gloss, Half Pint\u003c\/a\u003e, \u003ca href=\"\/products\/minwax-polyshades-stain-and-polyurethane-classic-oak-satin-quart\"\u003eClassic Oak Satin, Quart\u003c\/a\u003e. Prep raw wood with \u003ca href=\"\/products\/minwax-pre-stain-wood-conditioner-clear-quart\"\u003eMinwax Pre-Stain Wood Conditioner\u003c\/a\u003e and add clear protection with \u003ca href=\"\/products\/minwax-wipe-on-poly-clear-satin-pint\"\u003eMinwax Wipe-On Poly, Satin\u003c\/a\u003e or \u003ca href=\"\/products\/minwax-fast-drying-polyurethane-clear-satin-half-pint\"\u003eMinwax Fast-Drying Polyurethane, Satin\u003c\/a\u003e. Compare \u003ca href=\"\/collections\/curated-wood-stains-gel-stains\"\u003ewood stains and gel stains\u003c\/a\u003e or shop \u003ca href=\"\/collections\/minwax-wood-stains-finishes\"\u003eMinwax\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/www.minwax.com\/en\/products\/one-step-stain-finish\/polyshades\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades product page\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426213708-tds.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eMinwax PolyShades Product Data Sheet, rev 5\/1\/2023\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/minwax-027426614703-sds.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eMinwax SDS PolyShades Gloss Finish Classic Oak, revised 8\/9\/2026\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minwax","offers":[{"title":"Default Title","offer_id":67673278447926,"sku":"294-660","price":38.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/027426614703.jpg?v=1791582545"}],"url":"https:\/\/projectweekenddiy.com\/collections\/minwax-polyshades.oembed","provider":"Project Weekend DIY","version":"1.0","type":"link"}