{"title":"Glaze Effects","description":"\u003cp\u003eGeneral Finishes Glaze Effects is a translucent, water-based interior glaze for antiquing, distressing and color washing over water-based stain or paint, including GF Milk Paint. Apply it with a brush, roller, pad or sprayer, then wipe off the excess to leave color in the grain, corners and details. Colors can be intermixed for custom shades, and Clear Base lightens any color. General Finishes says a topcoat is required: let the glaze dry 3+ hours, then seal with 3 coats of a GF water-based topcoat.\u003c\/p\u003e\n\u003cp\u003eColors here: Van Dyke Brown, Burnt Umber, Pitch Black, Smokey Gray and Winter White, plus Clear Base, in pints and quarts (sizes vary by color). See also \u003ca href=\"\/collections\/general-finishes-milk-paint\"\u003eGeneral Finishes Milk Paint\u003c\/a\u003e. Free shipping at $75, no code needed (lower 48 + DC).\u003c\/p\u003e\n","products":[{"product_id":"general-finishes-glaze-effects-van-dyke-brown-pint","title":"General Finishes Glaze Effects, Van Dyke Brown, Pint","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Glaze Effects, Van Dyke Brown, Pint\u003c\/strong\u003e (GF TVDB) is a translucent water-based color from General Finishes for decorative finishes such as color washing, burnishing, marbling and a shabby chic look. It goes over GF Water Based Wood Stains and Milk Paints to add depth and character on interior cabinets, trim, doors and furniture. Glaze Effects colors can be intermixed for custom shades or layered over one another for deeper looks, and Glaze Effects Clear Base lightens a color. The glaze is decorative only, so it always gets a clear topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy one can, no case minimum.\u003c\/strong\u003e Free shipping at $75, no code needed (lower 48 + DC); some items are excluded at checkout. Unused, unopened items can be returned within 30 days of receiving them, and we send a prepaid return label; opened paint, aerosols and flammable liquids can't be returned. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eshipping policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes product page and technical data sheet)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and color\u003c\/th\u003e\n\u003ctd\u003ePint, Van Dyke Brown (GF TVDB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based glaze, interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse on\u003c\/th\u003e\n\u003ctd\u003eSealed interior cabinets, trim, doors and furniture; over GF Milk Paint, water-based wood stain or topcoat. Raw wood is not recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e60-80 sq ft per pint (GF product page; the TDS says up to 600 sq ft per gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness\u003c\/th\u003e\n\u003ctd\u003e3-5 mils wet, 0.75-1.25 mils dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry to touch\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eSpec table says 1+ hour; GF's application directions say dry 3+ hours between coats and before a water-based topcoat, and 24+ hours before GF oil-based products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1 or more; 3+ coats is not recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic or foam brush, pad, microfiber roller, or spray (HVLP 1.3-2.0 mm per the product page; the 2020 TDS lists 1.1-1.3 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eDistilled water, 5% up to 10%; GF Extender for more open time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eRequired: 3 coats of clear topcoat, such as GF High Performance Topcoat, Enduro Clear Poly (spray only) or Flat Out Flat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight solids\u003c\/th\u003e\n\u003ctd\u003e22%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 274.496 g\/L (GF product page; SDS 274.496 g\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water, or GF Brush \u0026amp; Gun Cleaner, right after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sun, tightly sealed; best used within 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply (General Finishes directions)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrep. Raw wood is not recommended; apply over a sealed surface such as GF Milk Paint or a topcoat. On a newly sealed surface, sand lightly with a 220-320 grit foam sanding sponge and remove dust. On an existing finish, scuff-clean with a maroon synthetic pad and a 50\/50 mix of denatured alcohol and water, dry 1-2 hours, sand lightly with 220-320 grit, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eFor less color and more control, apply 1 coat of GF High Performance Topcoat (any sheen) first. For deeper color, glaze directly over the stain or paint.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Thin if needed with distilled water, starting at 5% and going up to 10% by volume. For more open time in dry conditions, add 10-15% GF Extender where local rules allow (more than 2% makes it non-compliant under SCAQMD rules in California).\u003c\/li\u003e\n\u003cli\u003eApply a liberal coat with a synthetic or foam brush, pad applicator or microfiber roller, then wipe off the excess with a cloth, a good absorbent paper towel or a dry brush. Don't use T-shirts.\u003c\/li\u003e\n\u003cli\u003eDry 3+ hours between coats and before a GF water-based topcoat at 70°F and 50% humidity. Sand between coats with a 220-320 grit foam sponge; don't use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eSeal with 3 coats of clear topcoat in total. If you put 1 coat on before glazing, add at least 2 more over the glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eDon't use water-based products like this glaze with linseed or Danish oils, and don't mix Glaze Effects with GF Water Based Wood Stain (including Pre-Stain Natural). If you layer over an oil-based finish, let the oil dry 72+ hours first. Cool temperatures, humidity over 80%, thick coats and other brands' finishes all lengthen dry time.\u003c\/p\u003e\n\u003cp\u003eSafety: the GF Glaze Effects Van Dyke Brown SDS (version 4, issued 12\/15\/2019) lists it as not classified with no signal word. Its California Proposition 65 notice says it can expose you to ethylene oxide and 1,4-dioxane, known to the State of California to cause cancer, and ethanediol, known to cause birth defects or other reproductive harm. Work in a well-ventilated area, and wear NIOSH-approved respiratory and eye protection when spraying. Don't pour leftovers down the drain.\u003c\/p\u003e\n\u003cp\u003eAlso in a \u003ca href=\"\/products\/general-finishes-glaze-effects-van-dyke-brown-quart\"\u003eVan Dyke Brown quart\u003c\/a\u003e. To lighten the color, mix in \u003ca href=\"\/products\/general-finishes-glaze-effects-clear-base-pint\"\u003eGlaze Effects Clear Base\u003c\/a\u003e. More: \u003ca href=\"\/collections\/general-finishes-milk-paint\"\u003eGF Milk Paint\u003c\/a\u003e and all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e products.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use Glaze Effects on raw wood?\u003c\/strong\u003e GF does not recommend it. Apply it over a sealed surface such as GF Milk Paint, water-based stain or a coat of topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix Glaze Effects colors?\u003c\/strong\u003e Yes. GF says Glaze Effects colors can be intermixed for custom colors, and Glaze Effects Clear Base lightens a color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I topcoat?\u003c\/strong\u003e GF's directions say let it dry 3+ hours before a GF water-based topcoat at 70°F and 50% humidity, and 24+ hours before GF oil-based products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the finish:\u003c\/strong\u003e GF says Glaze Effects is decorative and always needs a clear topcoat, 3 coats in total, such as \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGeneral Finishes High Performance Topcoat, Clear Satin, Quart\u003c\/a\u003e ($41.95). A full kit of this pint, a \u003ca href=\"\/collections\/general-finishes-milk-paint\"\u003eMilk Paint\u003c\/a\u003e quart ($43.49) and the HP Satin quart comes to $106.44 and ships free. GF also cautions against any clear topcoat over white or light Milk Paint colors, because it may cause yellowing over wood.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-milk-paints-glazes\/glaze-effects\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Glaze Effects product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2020-04\/TDS-2020-03-Glaze-Effects-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGlaze Effects TDS (published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-07\/SDS-Water-Based-Glaze-Effects-Van-Dyke-Brown-General-Finishes-US-HCS-2012-v4-2019-12-15.pdf\" target=\"_blank\" rel=\"noopener\"\u003eVan Dyke Brown SDS v4, issued 12\/15\/2019\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673248268598,"sku":"TVDB","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016199990.jpg?v=1791581915"},{"product_id":"general-finishes-glaze-effects-burnt-umber-quart","title":"General Finishes Glaze Effects, Burnt Umber, Quart","description":"\u003cp\u003eGeneral Finishes Glaze Effects in Burnt Umber, Quart, adds translucent water-based color to decorative interior finishes. Plan about 120–160 sq ft from this quart can, depending on application and surface. Use over a sealed finish such as Milk Paint or a compatible topcoat; test the whole finish system and protect the glaze with clear topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy one can, no case minimum.\u003c\/strong\u003e Free shipping at $75, no code needed (lower 48 + DC); some items are excluded at checkout. Unused, unopened items can be returned within 30 days of receiving them, and we send a prepaid return label; opened paint, aerosols and flammable liquids can't be returned. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eshipping policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTranslucent color adds depth to decorative finishes.\u003c\/li\u003e\n\u003cli\u003eA glaze can accent details without hiding the whole base color.\u003c\/li\u003e\n\u003cli\u003eAn optional clear undercoat improves placement control.\u003c\/li\u003e\n\u003cli\u003eBrush, pad or roller application allows hand-finished effects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior sealed furniture, cabinets, trim and doors. Raw wood is not recommended. The manufacturer examples show this glaze over named paints or stains; they are combined-finish references, not promises of the same result on every surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eBurnt Umber \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based translucent glaze \/ interior sealed surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120–160 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30 minutes or longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ cure\u003c\/th\u003e\n\u003ctd\u003eDetailed application guidance: 3 hours or longer, fully dry; water-based finish system cures about 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1+ glaze coats; avoid 3 or more; finish with 3 compatible GF clear topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic or foam brush, pad, microfiber roller or spray; current HVLP guidance 1.3–2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDistilled water: start at 5%, up to 10% \/ soap and water or GF Brush \u0026amp; Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eDated Burnt Umber SDS: 293.554 g\/L; current page says under that number, so manufacturer reconciliation remains needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eQTBU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eLightly sand a newly sealed finish with a 220–320-grit foam sponge and remove dust. For an existing finish, scuff-clean with a non-woven pad and a 50:50 denatured alcohol\/water mix. Dry 1–2 hours, sand lightly with 220–320 grit, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eFor more placement control, first apply one compatible High Performance clear coat. Stir glaze thoroughly before and during use. Apply a liberal coat with a brush, pad or microfiber roller, then remove excess with an absorbent cloth, good paper towel or dry brush.\u003c\/li\u003e\n\u003cli\u003eDry at least three hours between glaze coats and before a water-based topcoat, until dry. Specifications also list a one-hour minimum; this application follows the longer detailed directions. Sand lightly between coats; avoid conventional steel wool and absorbency-poor T-shirts.\u003c\/li\u003e\n\u003cli\u003eProtect with three compatible GF topcoat coats. Allow 24 hours or longer before an oil-based product. An underlying oil finish needs 72 hours or longer before this water-based glaze. Cool, humid or thick applications need longer drying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eSection 2 lists this color as not classified, with no GHS signal word; follow all other handling instructions. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-07\/SDS-Water-Based-Glaze-Effects-Burnt-Umber-General-Finishes-US-HCS-2012-v4-2019-12-15.pdf\"\u003ematching-color safety sheet, issued 12\/15\/2019\u003c\/a\u003e and can label; its California notice warns of cancer and birth defects or reproductive harm from listed chemicals. Eye contact can irritate; avoid contact. Ventilate and use its specified protection. Spray application requires the manufacturer’s respiratory and eye protection and equipment checks. Clear Base Glaze Effects can lighten a color; test the mixture. Use Extender only under applicable manufacturer limits. Do not combine water-based finishes with linseed or Danish oils. Treat the finish gently through cure and follow the final topcoat’s cure instructions. Clean tools promptly and dispose under local rules; do not pour leftovers down drains.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I glaze raw wood?\u003c\/strong\u003e Use a sealed surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the glaze protect the finish?\u003c\/strong\u003e No. A compatible clear topcoat protects the decorative color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a sample match my project?\u003c\/strong\u003e Undercoat, preparation and glaze amount affect the result; test first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix Glaze Effects colors?\u003c\/strong\u003e Yes. GF says Glaze Effects colors can be intermixed for custom colors, and Glaze Effects Clear Base lightens a color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I topcoat?\u003c\/strong\u003e GF's directions say let it dry 3+ hours before a GF water-based topcoat at 70°F and 50% humidity, and 24+ hours before GF oil-based products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the finish:\u003c\/strong\u003e GF says Glaze Effects is decorative and always needs a clear topcoat, 3 coats in total, such as \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGeneral Finishes High Performance Topcoat, Clear Satin, Quart\u003c\/a\u003e ($41.95). This quart of glaze plus that topcoat quart comes to $75.50, which clears our $75 free-shipping line. GF also cautions against any clear topcoat over white or light Milk Paint colors, because it may cause yellowing over wood.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673254297910,"sku":"QTBU","price":33.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016102006.jpg?v=1791730297"},{"product_id":"general-finishes-glaze-effects-clear-base-pint","title":"General Finishes Glaze Effects, Clear Base, Pint","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Glaze Effects, Clear Base, Pint\u003c\/strong\u003e (GF PTCB) is the clear, uncolored base General Finishes uses to make its Glaze Effects colors. Use it to dilute a Glaze Effects color for a lighter, softer look, or make your own custom glaze or stain color by mixing it with GF Milk Paint: GF suggests starting at 1 part Milk Paint to 1 part Clear Base and adding more Clear Base as needed (some colors take 2 parts). Keep paint at 50% of the mix or less, or the glaze gets hard to wipe back. Like the colors, it goes over sealed interior surfaces and always gets a clear topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy one can, no case minimum.\u003c\/strong\u003e Free shipping at $75, no code needed (lower 48 + DC); some items are excluded at checkout. Unused, unopened items can be returned within 30 days of receiving them, and we send a prepaid return label; opened paint, aerosols and flammable liquids can't be returned. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eshipping policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes product page and technical data sheet)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and color\u003c\/th\u003e\n\u003ctd\u003ePint, Clear Base (GF PTCB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based glaze, interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse on\u003c\/th\u003e\n\u003ctd\u003eSealed interior cabinets, trim, doors and furniture; over GF Milk Paint, water-based wood stain or topcoat. Raw wood is not recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e60-80 sq ft per pint (GF product page; the TDS says up to 600 sq ft per gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness\u003c\/th\u003e\n\u003ctd\u003e3-5 mils wet, 0.75-1.25 mils dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry to touch\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eSpec table says 1+ hour; GF's application directions say dry 3+ hours between coats and before a water-based topcoat, and 24+ hours before GF oil-based products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1 or more; 3+ coats is not recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic or foam brush, pad, microfiber roller, or spray (HVLP 1.8-2.0 mm per the Clear Base product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eDistilled water, 5% up to 10%; GF Extender for more open time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eRequired: 3 coats of clear topcoat, such as GF High Performance Topcoat, Enduro Clear Poly (spray only) or Flat Out Flat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight solids\u003c\/th\u003e\n\u003ctd\u003e22%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e295.605 g\/L (GF product page and SDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water, or GF Brush \u0026amp; Gun Cleaner, right after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sun, tightly sealed; best used within 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply (General Finishes directions)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrep. Raw wood is not recommended; apply over a sealed surface such as GF Milk Paint or a topcoat. On a newly sealed surface, sand lightly with a 220-320 grit foam sanding sponge and remove dust. On an existing finish, scuff-clean with a maroon synthetic pad and a 50\/50 mix of denatured alcohol and water, dry 1-2 hours, sand lightly with 220-320 grit, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eFor less color and more control, apply 1 coat of GF High Performance Topcoat (any sheen) first. For deeper color, glaze directly over the stain or paint.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Thin if needed with distilled water, starting at 5% and going up to 10% by volume. For more open time in dry conditions, add 10-15% GF Extender where local rules allow (more than 2% makes it non-compliant under SCAQMD rules in California).\u003c\/li\u003e\n\u003cli\u003eApply a liberal coat with a synthetic or foam brush, pad applicator or microfiber roller, then wipe off the excess with a cloth, a good absorbent paper towel or a dry brush. Don't use T-shirts.\u003c\/li\u003e\n\u003cli\u003eDry 3+ hours between coats and before a GF water-based topcoat at 70°F and 50% humidity. Sand between coats with a 220-320 grit foam sponge; don't use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eSeal with 3 coats of clear topcoat in total. If you put 1 coat on before glazing, add at least 2 more over the glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eDon't use water-based products like this glaze with linseed or Danish oils, and don't mix Glaze Effects with GF Water Based Wood Stain (including Pre-Stain Natural). If you layer over an oil-based finish, let the oil dry 72+ hours first. Cool temperatures, humidity over 80%, thick coats and other brands' finishes all lengthen dry time.\u003c\/p\u003e\n\u003cp\u003eSafety: the GF Glaze Effects Clear Base SDS (version 4, issued 12\/15\/2019) lists it as not classified with no signal word. Its California Proposition 65 notice says it can expose you to ethylene oxide and 1,4-dioxane, known to the State of California to cause cancer, and ethanediol, known to cause birth defects or other reproductive harm. Work in a well-ventilated area, and wear NIOSH-approved respiratory and eye protection when spraying. Don't pour leftovers down the drain.\u003c\/p\u003e\n\u003cp\u003eAlso in a \u003ca href=\"\/products\/general-finishes-glaze-effects-clear-base-quart\"\u003eClear Base quart\u003c\/a\u003e. Pair it with \u003ca href=\"\/products\/general-finishes-glaze-effects-van-dyke-brown-quart\"\u003eGlaze Effects Van Dyke Brown\u003c\/a\u003e or \u003ca href=\"\/collections\/general-finishes-milk-paint\"\u003eGF Milk Paint\u003c\/a\u003e, or browse all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e products.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use Glaze Effects on raw wood?\u003c\/strong\u003e GF does not recommend it. Apply it over a sealed surface such as GF Milk Paint, water-based stain or a coat of topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix Glaze Effects colors?\u003c\/strong\u003e Yes. GF says Glaze Effects colors can be intermixed for custom colors, and Glaze Effects Clear Base lightens a color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I topcoat?\u003c\/strong\u003e GF's directions say let it dry 3+ hours before a GF water-based topcoat at 70°F and 50% humidity, and 24+ hours before GF oil-based products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the finish:\u003c\/strong\u003e GF says Glaze Effects is decorative and always needs a clear topcoat, 3 coats in total, such as \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGeneral Finishes High Performance Topcoat, Clear Satin, Quart\u003c\/a\u003e ($41.95). A full kit of this pint, a \u003ca href=\"\/collections\/general-finishes-milk-paint\"\u003eMilk Paint\u003c\/a\u003e quart ($43.49) and the HP Satin quart comes to $106.44 and ships free. GF also cautions against any clear topcoat over white or light Milk Paint colors, because it may cause yellowing over wood.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-milk-paints-glazes\/glaze-effects-clear-base\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Glaze Effects Clear Base product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-milk-paints-glazes\/glaze-effects\" target=\"_blank\" rel=\"noopener\"\u003eGlaze Effects product page (directions)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2020-04\/TDS-2020-03-Glaze-Effects-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGlaze Effects TDS (published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-07\/SDS-Glaze-Effects-Clear-Base-General-Finishes-US-HCS-2012-v4-2019-12-15.pdf\" target=\"_blank\" rel=\"noopener\"\u003eClear Base SDS v4, issued 12\/15\/2019\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673254330678,"sku":"PTCB","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016101979.jpg?v=1791582099"},{"product_id":"general-finishes-glaze-effects-clear-base-quart","title":"General Finishes Glaze Effects, Clear Base, Quart","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Glaze Effects, Clear Base, Quart\u003c\/strong\u003e (GF QTCB) is the clear, uncolored base General Finishes uses to make its Glaze Effects colors. Use it to dilute a Glaze Effects color for a lighter, softer look, or make your own custom glaze or stain color by mixing it with GF Milk Paint: GF suggests starting at 1 part Milk Paint to 1 part Clear Base and adding more Clear Base as needed (some colors take 2 parts). Keep paint at 50% of the mix or less, or the glaze gets hard to wipe back. Like the colors, it goes over sealed interior surfaces and always gets a clear topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy one can, no case minimum.\u003c\/strong\u003e Free shipping at $75, no code needed (lower 48 + DC); some items are excluded at checkout. Unused, unopened items can be returned within 30 days of receiving them, and we send a prepaid return label; opened paint, aerosols and flammable liquids can't be returned. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eshipping policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes product page and technical data sheet)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and color\u003c\/th\u003e\n\u003ctd\u003eQuart, Clear Base (GF QTCB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based glaze, interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse on\u003c\/th\u003e\n\u003ctd\u003eSealed interior cabinets, trim, doors and furniture; over GF Milk Paint, water-based wood stain or topcoat. Raw wood is not recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e120-160 sq ft per quart (GF product page; the TDS says up to 600 sq ft per gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness\u003c\/th\u003e\n\u003ctd\u003e3-5 mils wet, 0.75-1.25 mils dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry to touch\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003eSpec table says 1+ hour; GF's application directions say dry 3+ hours between coats and before a water-based topcoat, and 24+ hours before GF oil-based products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1 or more; 3+ coats is not recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic or foam brush, pad, microfiber roller, or spray (HVLP 1.8-2.0 mm per the Clear Base product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eDistilled water, 5% up to 10%; GF Extender for more open time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eRequired: 3 coats of clear topcoat, such as GF High Performance Topcoat, Enduro Clear Poly (spray only) or Flat Out Flat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight solids\u003c\/th\u003e\n\u003ctd\u003e22%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e295.605 g\/L (GF product page and SDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water, or GF Brush \u0026amp; Gun Cleaner, right after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sun, tightly sealed; best used within 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply (General Finishes directions)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrep. Raw wood is not recommended; apply over a sealed surface such as GF Milk Paint or a topcoat. On a newly sealed surface, sand lightly with a 220-320 grit foam sanding sponge and remove dust. On an existing finish, scuff-clean with a maroon synthetic pad and a 50\/50 mix of denatured alcohol and water, dry 1-2 hours, sand lightly with 220-320 grit, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eFor less color and more control, apply 1 coat of GF High Performance Topcoat (any sheen) first. For deeper color, glaze directly over the stain or paint.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Thin if needed with distilled water, starting at 5% and going up to 10% by volume. For more open time in dry conditions, add 10-15% GF Extender where local rules allow (more than 2% makes it non-compliant under SCAQMD rules in California).\u003c\/li\u003e\n\u003cli\u003eApply a liberal coat with a synthetic or foam brush, pad applicator or microfiber roller, then wipe off the excess with a cloth, a good absorbent paper towel or a dry brush. Don't use T-shirts.\u003c\/li\u003e\n\u003cli\u003eDry 3+ hours between coats and before a GF water-based topcoat at 70°F and 50% humidity. Sand between coats with a 220-320 grit foam sponge; don't use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eSeal with 3 coats of clear topcoat in total. If you put 1 coat on before glazing, add at least 2 more over the glaze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eDon't use water-based products like this glaze with linseed or Danish oils, and don't mix Glaze Effects with GF Water Based Wood Stain (including Pre-Stain Natural). If you layer over an oil-based finish, let the oil dry 72+ hours first. Cool temperatures, humidity over 80%, thick coats and other brands' finishes all lengthen dry time.\u003c\/p\u003e\n\u003cp\u003eSafety: the GF Glaze Effects Clear Base SDS (version 4, issued 12\/15\/2019) lists it as not classified with no signal word. Its California Proposition 65 notice says it can expose you to ethylene oxide and 1,4-dioxane, known to the State of California to cause cancer, and ethanediol, known to cause birth defects or other reproductive harm. Work in a well-ventilated area, and wear NIOSH-approved respiratory and eye protection when spraying. Don't pour leftovers down the drain.\u003c\/p\u003e\n\u003cp\u003eAlso in a \u003ca href=\"\/products\/general-finishes-glaze-effects-clear-base-pint\"\u003eClear Base pint\u003c\/a\u003e. Pair it with \u003ca href=\"\/products\/general-finishes-glaze-effects-van-dyke-brown-quart\"\u003eGlaze Effects Van Dyke Brown\u003c\/a\u003e or \u003ca href=\"\/collections\/general-finishes-milk-paint\"\u003eGF Milk Paint\u003c\/a\u003e, or browse all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e products.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use Glaze Effects on raw wood?\u003c\/strong\u003e GF does not recommend it. Apply it over a sealed surface such as GF Milk Paint, water-based stain or a coat of topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix Glaze Effects colors?\u003c\/strong\u003e Yes. GF says Glaze Effects colors can be intermixed for custom colors, and Glaze Effects Clear Base lightens a color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I topcoat?\u003c\/strong\u003e GF's directions say let it dry 3+ hours before a GF water-based topcoat at 70°F and 50% humidity, and 24+ hours before GF oil-based products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the finish:\u003c\/strong\u003e GF says Glaze Effects is decorative and always needs a clear topcoat, 3 coats in total, such as \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGeneral Finishes High Performance Topcoat, Clear Satin, Quart\u003c\/a\u003e ($41.95). This quart of glaze plus that topcoat quart comes to $75.50, which clears our $75 free-shipping line. GF also cautions against any clear topcoat over white or light Milk Paint colors, because it may cause yellowing over wood.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-milk-paints-glazes\/glaze-effects-clear-base\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Glaze Effects Clear Base product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-milk-paints-glazes\/glaze-effects\" target=\"_blank\" rel=\"noopener\"\u003eGlaze Effects product page (directions)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2020-04\/TDS-2020-03-Glaze-Effects-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGlaze Effects TDS (published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-07\/SDS-Glaze-Effects-Clear-Base-General-Finishes-US-HCS-2012-v4-2019-12-15.pdf\" target=\"_blank\" rel=\"noopener\"\u003eClear Base SDS v4, issued 12\/15\/2019\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673254363446,"sku":"QTCB","price":33.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016102044.jpg?v=1791582102"},{"product_id":"general-finishes-glaze-effects-pitch-black-pint","title":"General Finishes Glaze Effects, Pitch Black, Pint","description":"\u003cp\u003eGeneral Finishes Glaze Effects in Pitch Black, Pint, adds translucent water-based color to decorative interior finishes. Plan about 60–80 sq ft from this pint can, depending on application and surface. Use over a sealed finish such as Milk Paint or a compatible topcoat; test the whole finish system and protect the glaze with clear topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy one can, no case minimum.\u003c\/strong\u003e Free shipping at $75, no code needed (lower 48 + DC); some items are excluded at checkout. Unused, unopened items can be returned within 30 days of receiving them, and we send a prepaid return label; opened paint, aerosols and flammable liquids can't be returned. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eshipping policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTranslucent color adds depth to decorative finishes.\u003c\/li\u003e\n\u003cli\u003eA glaze can accent details without hiding the whole base color.\u003c\/li\u003e\n\u003cli\u003eAn optional clear undercoat improves placement control.\u003c\/li\u003e\n\u003cli\u003eBrush, pad or roller application allows hand-finished effects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior sealed furniture, cabinets, trim and doors. Raw wood is not recommended. The manufacturer examples show this glaze over named paints or stains; they are combined-finish references, not promises of the same result on every surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003ePitch Black \/ Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based translucent glaze \/ interior sealed surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 60–80 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30 minutes or longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ cure\u003c\/th\u003e\n\u003ctd\u003eDetailed application guidance: 3 hours or longer, fully dry; water-based finish system cures about 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1+ glaze coats; avoid 3 or more; finish with 3 compatible GF clear topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic or foam brush, pad, microfiber roller or spray; current HVLP guidance 1.3–2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDistilled water: start at 5%, up to 10% \/ soap and water or GF Brush \u0026amp; Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eDated Pitch Black SDS: 303.733 g\/L; current page says under that number, so manufacturer reconciliation remains needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003ePTPB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eLightly sand a newly sealed finish with a 220–320-grit foam sponge and remove dust. For an existing finish, scuff-clean with a non-woven pad and a 50:50 denatured alcohol\/water mix. Dry 1–2 hours, sand lightly with 220–320 grit, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eFor more placement control, first apply one compatible High Performance clear coat. Stir glaze thoroughly before and during use. Apply a liberal coat with a brush, pad or microfiber roller, then remove excess with an absorbent cloth, good paper towel or dry brush.\u003c\/li\u003e\n\u003cli\u003eDry at least three hours between glaze coats and before a water-based topcoat, until dry. Specifications also list a one-hour minimum; this application follows the longer detailed directions. Sand lightly between coats; avoid conventional steel wool and absorbency-poor T-shirts.\u003c\/li\u003e\n\u003cli\u003eProtect with three compatible GF topcoat coats. Allow 24 hours or longer before an oil-based product. An underlying oil finish needs 72 hours or longer before this water-based glaze. Cool, humid or thick applications need longer drying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e Suspected of causing cancer. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-07\/SDS-Water-Based-Glaze-Effects-Pitch-Black-General-Finishes-US-HCS-2012-v4-2019-12-15.pdf\"\u003ematching-color safety sheet, issued 12\/15\/2019\u003c\/a\u003e and can label; its California notice warns of cancer and birth defects or reproductive harm from listed chemicals. Eye contact can irritate; avoid contact. Ventilate and use its specified protection. Spray application requires the manufacturer’s respiratory and eye protection and equipment checks. Clear Base Glaze Effects can lighten a color; test the mixture. Use Extender only under applicable manufacturer limits. Do not combine water-based finishes with linseed or Danish oils. Treat the finish gently through cure and follow the final topcoat’s cure instructions. Clean tools promptly and dispose under local rules; do not pour leftovers down drains.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I glaze raw wood?\u003c\/strong\u003e Use a sealed surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the glaze protect the finish?\u003c\/strong\u003e No. A compatible clear topcoat protects the decorative color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a sample match my project?\u003c\/strong\u003e Undercoat, preparation and glaze amount affect the result; test first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix Glaze Effects colors?\u003c\/strong\u003e Yes. GF says Glaze Effects colors can be intermixed for custom colors, and Glaze Effects Clear Base lightens a color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I topcoat?\u003c\/strong\u003e GF's directions say let it dry 3+ hours before a GF water-based topcoat at 70°F and 50% humidity, and 24+ hours before GF oil-based products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the finish:\u003c\/strong\u003e GF says Glaze Effects is decorative and always needs a clear topcoat, 3 coats in total, such as \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGeneral Finishes High Performance Topcoat, Clear Satin, Quart\u003c\/a\u003e ($41.95). A full kit of this pint, a \u003ca href=\"\/collections\/general-finishes-milk-paint\"\u003eMilk Paint\u003c\/a\u003e quart ($43.49) and the HP Satin quart comes to $106.44 and ships free. GF also cautions against any clear topcoat over white or light Milk Paint colors, because it may cause yellowing over wood.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673254428982,"sku":"PTPB","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016101955.jpg?v=1791582104"},{"product_id":"general-finishes-glaze-effects-pitch-black-quart","title":"General Finishes Glaze Effects, Pitch Black, Quart","description":"\u003cp\u003eGeneral Finishes Glaze Effects in Pitch Black, Quart, adds translucent water-based color to decorative interior finishes. Plan about 120–160 sq ft from this quart can, depending on application and surface. Use over a sealed finish such as Milk Paint or a compatible topcoat; test the whole finish system and protect the glaze with clear topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy one can, no case minimum.\u003c\/strong\u003e Free shipping at $75, no code needed (lower 48 + DC); some items are excluded at checkout. Unused, unopened items can be returned within 30 days of receiving them, and we send a prepaid return label; opened paint, aerosols and flammable liquids can't be returned. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eshipping policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTranslucent color adds depth to decorative finishes.\u003c\/li\u003e\n\u003cli\u003eA glaze can accent details without hiding the whole base color.\u003c\/li\u003e\n\u003cli\u003eAn optional clear undercoat improves placement control.\u003c\/li\u003e\n\u003cli\u003eBrush, pad or roller application allows hand-finished effects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior sealed furniture, cabinets, trim and doors. Raw wood is not recommended. The manufacturer examples show this glaze over named paints or stains; they are combined-finish references, not promises of the same result on every surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003ePitch Black \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based translucent glaze \/ interior sealed surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120–160 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30 minutes or longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ cure\u003c\/th\u003e\n\u003ctd\u003eDetailed application guidance: 3 hours or longer, fully dry; water-based finish system cures about 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1+ glaze coats; avoid 3 or more; finish with 3 compatible GF clear topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic or foam brush, pad, microfiber roller or spray; current HVLP guidance 1.3–2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDistilled water: start at 5%, up to 10% \/ soap and water or GF Brush \u0026amp; Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eDated Pitch Black SDS: 303.733 g\/L; current page says under that number, so manufacturer reconciliation remains needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eQTPB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eLightly sand a newly sealed finish with a 220–320-grit foam sponge and remove dust. For an existing finish, scuff-clean with a non-woven pad and a 50:50 denatured alcohol\/water mix. Dry 1–2 hours, sand lightly with 220–320 grit, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eFor more placement control, first apply one compatible High Performance clear coat. Stir glaze thoroughly before and during use. Apply a liberal coat with a brush, pad or microfiber roller, then remove excess with an absorbent cloth, good paper towel or dry brush.\u003c\/li\u003e\n\u003cli\u003eDry at least three hours between glaze coats and before a water-based topcoat, until dry. Specifications also list a one-hour minimum; this application follows the longer detailed directions. Sand lightly between coats; avoid conventional steel wool and absorbency-poor T-shirts.\u003c\/li\u003e\n\u003cli\u003eProtect with three compatible GF topcoat coats. Allow 24 hours or longer before an oil-based product. An underlying oil finish needs 72 hours or longer before this water-based glaze. Cool, humid or thick applications need longer drying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e Suspected of causing cancer. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-07\/SDS-Water-Based-Glaze-Effects-Pitch-Black-General-Finishes-US-HCS-2012-v4-2019-12-15.pdf\"\u003ematching-color safety sheet, issued 12\/15\/2019\u003c\/a\u003e and can label; its California notice warns of cancer and birth defects or reproductive harm from listed chemicals. Eye contact can irritate; avoid contact. Ventilate and use its specified protection. Spray application requires the manufacturer’s respiratory and eye protection and equipment checks. Clear Base Glaze Effects can lighten a color; test the mixture. Use Extender only under applicable manufacturer limits. Do not combine water-based finishes with linseed or Danish oils. Treat the finish gently through cure and follow the final topcoat’s cure instructions. Clean tools promptly and dispose under local rules; do not pour leftovers down drains.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I glaze raw wood?\u003c\/strong\u003e Use a sealed surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the glaze protect the finish?\u003c\/strong\u003e No. A compatible clear topcoat protects the decorative color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a sample match my project?\u003c\/strong\u003e Undercoat, preparation and glaze amount affect the result; test first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix Glaze Effects colors?\u003c\/strong\u003e Yes. GF says Glaze Effects colors can be intermixed for custom colors, and Glaze Effects Clear Base lightens a color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I topcoat?\u003c\/strong\u003e GF's directions say let it dry 3+ hours before a GF water-based topcoat at 70°F and 50% humidity, and 24+ hours before GF oil-based products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the finish:\u003c\/strong\u003e GF says Glaze Effects is decorative and always needs a clear topcoat, 3 coats in total, such as \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGeneral Finishes High Performance Topcoat, Clear Satin, Quart\u003c\/a\u003e ($41.95). This quart of glaze plus that topcoat quart comes to $75.50, which clears our $75 free-shipping line. GF also cautions against any clear topcoat over white or light Milk Paint colors, because it may cause yellowing over wood.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673254691126,"sku":"QTPB","price":33.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016102013.jpg?v=1791582106"},{"product_id":"general-finishes-glaze-effects-van-dyke-brown-quart","title":"General Finishes Glaze Effects, Van Dyke Brown, Quart","description":"\u003cp\u003eGeneral Finishes Glaze Effects in Van Dyke Brown, Quart, adds translucent water-based color to decorative interior finishes. Plan about 120–160 sq ft from this quart can, depending on application and surface. Use over a sealed finish such as Milk Paint or a compatible topcoat; test the whole finish system and protect the glaze with clear topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy one can, no case minimum.\u003c\/strong\u003e Free shipping at $75, no code needed (lower 48 + DC); some items are excluded at checkout. Unused, unopened items can be returned within 30 days of receiving them, and we send a prepaid return label; opened paint, aerosols and flammable liquids can't be returned. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eshipping policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTranslucent color adds depth to decorative finishes.\u003c\/li\u003e\n\u003cli\u003eA glaze can accent details without hiding the whole base color.\u003c\/li\u003e\n\u003cli\u003eAn optional clear undercoat improves placement control.\u003c\/li\u003e\n\u003cli\u003eBrush, pad or roller application allows hand-finished effects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior sealed furniture, cabinets, trim and doors. Raw wood is not recommended. The manufacturer examples show this glaze over named paints or stains; they are combined-finish references, not promises of the same result on every surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eVan Dyke Brown \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based translucent glaze \/ interior sealed surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120–160 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30 minutes or longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ cure\u003c\/th\u003e\n\u003ctd\u003eDetailed application guidance: 3 hours or longer, fully dry; water-based finish system cures about 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1+ glaze coats; avoid 3 or more; finish with 3 compatible GF clear topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic or foam brush, pad, microfiber roller or spray; current HVLP guidance 1.3–2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDistilled water: start at 5%, up to 10% \/ soap and water or GF Brush \u0026amp; Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eDated Van Dyke Brown SDS: 274.496 g\/L; current page says under that number, so manufacturer reconciliation remains needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eQTVDB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eLightly sand a newly sealed finish with a 220–320-grit foam sponge and remove dust. For an existing finish, scuff-clean with a non-woven pad and a 50:50 denatured alcohol\/water mix. Dry 1–2 hours, sand lightly with 220–320 grit, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eFor more placement control, first apply one compatible High Performance clear coat. Stir glaze thoroughly before and during use. Apply a liberal coat with a brush, pad or microfiber roller, then remove excess with an absorbent cloth, good paper towel or dry brush.\u003c\/li\u003e\n\u003cli\u003eDry at least three hours between glaze coats and before a water-based topcoat, until dry. Specifications also list a one-hour minimum; this application follows the longer detailed directions. Sand lightly between coats; avoid conventional steel wool and absorbency-poor T-shirts.\u003c\/li\u003e\n\u003cli\u003eProtect with three compatible GF topcoat coats. Allow 24 hours or longer before an oil-based product. An underlying oil finish needs 72 hours or longer before this water-based glaze. Cool, humid or thick applications need longer drying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eSection 2 lists this color as not classified, with no GHS signal word; follow all other handling instructions. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-07\/SDS-Water-Based-Glaze-Effects-Van-Dyke-Brown-General-Finishes-US-HCS-2012-v4-2019-12-15.pdf\"\u003ematching-color safety sheet, issued 12\/15\/2019\u003c\/a\u003e and can label; its California notice warns of cancer and birth defects or reproductive harm from listed chemicals. Eye contact can irritate; avoid contact. Ventilate and use its specified protection. Spray application requires the manufacturer’s respiratory and eye protection and equipment checks. Clear Base Glaze Effects can lighten a color; test the mixture. Use Extender only under applicable manufacturer limits. Do not combine water-based finishes with linseed or Danish oils. Treat the finish gently through cure and follow the final topcoat’s cure instructions. Clean tools promptly and dispose under local rules; do not pour leftovers down drains.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I glaze raw wood?\u003c\/strong\u003e Use a sealed surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the glaze protect the finish?\u003c\/strong\u003e No. A compatible clear topcoat protects the decorative color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a sample match my project?\u003c\/strong\u003e Undercoat, preparation and glaze amount affect the result; test first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix Glaze Effects colors?\u003c\/strong\u003e Yes. GF says Glaze Effects colors can be intermixed for custom colors, and Glaze Effects Clear Base lightens a color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I topcoat?\u003c\/strong\u003e GF's directions say let it dry 3+ hours before a GF water-based topcoat at 70°F and 50% humidity, and 24+ hours before GF oil-based products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the finish:\u003c\/strong\u003e GF says Glaze Effects is decorative and always needs a clear topcoat, 3 coats in total, such as \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGeneral Finishes High Performance Topcoat, Clear Satin, Quart\u003c\/a\u003e ($41.95). This quart of glaze plus that topcoat quart comes to $75.50, which clears our $75 free-shipping line. GF also cautions against any clear topcoat over white or light Milk Paint colors, because it may cause yellowing over wood.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673254723894,"sku":"QTVDB","price":33.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016102037.jpg?v=1791582109"},{"product_id":"general-finishes-glaze-effects-winter-white-quart","title":"General Finishes Glaze Effects, Winter White, Quart","description":"\u003cp\u003eGeneral Finishes Glaze Effects in Winter White, Quart, adds translucent water-based color to decorative interior finishes. Plan about 120–160 sq ft from this quart can, depending on application and surface. Use over a sealed finish such as Milk Paint or a compatible topcoat; test the whole finish system and protect the glaze with clear topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy one can, no case minimum.\u003c\/strong\u003e Free shipping at $75, no code needed (lower 48 + DC); some items are excluded at checkout. Unused, unopened items can be returned within 30 days of receiving them, and we send a prepaid return label; opened paint, aerosols and flammable liquids can't be returned. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eshipping policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTranslucent color adds depth to decorative finishes.\u003c\/li\u003e\n\u003cli\u003eA glaze can accent details without hiding the whole base color.\u003c\/li\u003e\n\u003cli\u003eAn optional clear undercoat improves placement control.\u003c\/li\u003e\n\u003cli\u003eBrush, pad or roller application allows hand-finished effects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior sealed furniture, cabinets, trim and doors. Raw wood is not recommended. The manufacturer examples show this glaze over named paints or stains; they are combined-finish references, not promises of the same result on every surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eWinter White \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based translucent glaze \/ interior sealed surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 120–160 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30 minutes or longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ cure\u003c\/th\u003e\n\u003ctd\u003eDetailed application guidance: 3 hours or longer, fully dry; water-based finish system cures about 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1+ glaze coats; avoid 3 or more; finish with 3 compatible GF clear topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic or foam brush, pad, microfiber roller or spray; current HVLP guidance 1.3–2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDistilled water: start at 5%, up to 10% \/ soap and water or GF Brush \u0026amp; Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eDated Winter White SDS: 273.767 g\/L; current page says under that number, so manufacturer reconciliation remains needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eQTWW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eLightly sand a newly sealed finish with a 220–320-grit foam sponge and remove dust. For an existing finish, scuff-clean with a non-woven pad and a 50:50 denatured alcohol\/water mix. Dry 1–2 hours, sand lightly with 220–320 grit, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eFor more placement control, first apply one compatible High Performance clear coat. Stir glaze thoroughly before and during use. Apply a liberal coat with a brush, pad or microfiber roller, then remove excess with an absorbent cloth, good paper towel or dry brush.\u003c\/li\u003e\n\u003cli\u003eDry at least three hours between glaze coats and before a water-based topcoat, until dry. Specifications also list a one-hour minimum; this application follows the longer detailed directions. Sand lightly between coats; avoid conventional steel wool and absorbency-poor T-shirts.\u003c\/li\u003e\n\u003cli\u003eProtect with three compatible GF topcoat coats. Allow 24 hours or longer before an oil-based product. An underlying oil finish needs 72 hours or longer before this water-based glaze. Cool, humid or thick applications need longer drying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e Suspected of causing cancer. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-07\/SDS-Water-Based-Glaze-Effects-Winter-White-General-Finishes-US-HCS-2012-v4-2019-12-15.pdf\"\u003ematching-color safety sheet, issued 12\/15\/2019\u003c\/a\u003e and can label; its California notice warns of cancer and birth defects or reproductive harm from listed chemicals. Eye contact can irritate; avoid contact. Ventilate and use its specified protection. Spray application requires the manufacturer’s respiratory and eye protection and equipment checks. Clear Base Glaze Effects can lighten a color; test the mixture. Use Extender only under applicable manufacturer limits. Do not combine water-based finishes with linseed or Danish oils. Treat the finish gently through cure and follow the final topcoat’s cure instructions. Clean tools promptly and dispose under local rules; do not pour leftovers down drains.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I glaze raw wood?\u003c\/strong\u003e Use a sealed surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the glaze protect the finish?\u003c\/strong\u003e No. A compatible clear topcoat protects the decorative color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a sample match my project?\u003c\/strong\u003e Undercoat, preparation and glaze amount affect the result; test first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix Glaze Effects colors?\u003c\/strong\u003e Yes. GF says Glaze Effects colors can be intermixed for custom colors, and Glaze Effects Clear Base lightens a color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I topcoat?\u003c\/strong\u003e GF's directions say let it dry 3+ hours before a GF water-based topcoat at 70°F and 50% humidity, and 24+ hours before GF oil-based products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the finish:\u003c\/strong\u003e GF says Glaze Effects is decorative and always needs a clear topcoat, 3 coats in total, such as \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGeneral Finishes High Performance Topcoat, Clear Satin, Quart\u003c\/a\u003e ($41.95). This quart of glaze plus that topcoat quart comes to $75.50, which clears our $75 free-shipping line. GF also cautions against any clear topcoat over white or light Milk Paint colors, because it may cause yellowing over wood.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673255018806,"sku":"QTWW","price":33.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016102020.jpg?v=1791582111"},{"product_id":"general-finishes-glaze-effects-smokey-gray-pint","title":"General Finishes Glaze Effects, Smokey Gray, Pint","description":"\u003cp\u003eGeneral Finishes Glaze Effects in Smokey Gray, Pint, adds translucent water-based color to decorative interior finishes. Plan about 60–80 sq ft from this pint can, depending on application and surface. Use over a sealed finish such as Milk Paint or a compatible topcoat; test the whole finish system and protect the glaze with clear topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy one can, no case minimum.\u003c\/strong\u003e Free shipping at $75, no code needed (lower 48 + DC); some items are excluded at checkout. Unused, unopened items can be returned within 30 days of receiving them, and we send a prepaid return label; opened paint, aerosols and flammable liquids can't be returned. See our \u003ca href=\"\/policies\/shipping-policy\"\u003eshipping policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTranslucent color adds depth to decorative finishes.\u003c\/li\u003e\n\u003cli\u003eA glaze can accent details without hiding the whole base color.\u003c\/li\u003e\n\u003cli\u003eAn optional clear undercoat improves placement control.\u003c\/li\u003e\n\u003cli\u003eBrush, pad or roller application allows hand-finished effects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior sealed furniture, cabinets, trim and doors. Raw wood is not recommended. The manufacturer examples show this glaze over named paints or stains; they are combined-finish references, not promises of the same result on every surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSmokey Gray \/ Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eWater-based translucent glaze \/ interior sealed surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 60–80 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30 minutes or longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat \/ cure\u003c\/th\u003e\n\u003ctd\u003eDetailed application guidance: 3 hours or longer, fully dry; water-based finish system cures about 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1+ glaze coats; avoid 3 or more; finish with 3 compatible GF clear topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic or foam brush, pad, microfiber roller or spray; current HVLP guidance 1.3–2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDistilled water: start at 5%, up to 10% \/ soap and water or GF Brush \u0026amp; Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eDated Smokey Gray SDS: 268.553 g\/L; current page says under that number, so manufacturer reconciliation remains needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003ePTSG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eLightly sand a newly sealed finish with a 220–320-grit foam sponge and remove dust. For an existing finish, scuff-clean with a non-woven pad and a 50:50 denatured alcohol\/water mix. Dry 1–2 hours, sand lightly with 220–320 grit, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eFor more placement control, first apply one compatible High Performance clear coat. Stir glaze thoroughly before and during use. Apply a liberal coat with a brush, pad or microfiber roller, then remove excess with an absorbent cloth, good paper towel or dry brush.\u003c\/li\u003e\n\u003cli\u003eDry at least three hours between glaze coats and before a water-based topcoat, until dry. Specifications also list a one-hour minimum; this application follows the longer detailed directions. Sand lightly between coats; avoid conventional steel wool and absorbency-poor T-shirts.\u003c\/li\u003e\n\u003cli\u003eProtect with three compatible GF topcoat coats. Allow 24 hours or longer before an oil-based product. An underlying oil finish needs 72 hours or longer before this water-based glaze. Cool, humid or thick applications need longer drying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e Suspected of causing cancer. Harmful to aquatic life; avoid environmental release. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-07\/SDS-Water-Based-Glaze-Effects-Smokey-Gray-General-Finishes-US-HCS-2012-v4.7-2019-03-10.pdf\"\u003ematching-color safety sheet, issued 03\/10\/2019\u003c\/a\u003e and can label; its California notice warns of cancer and birth defects or reproductive harm from listed chemicals. Eye contact can irritate; avoid contact. Ventilate and use its specified protection. Spray application requires the manufacturer’s respiratory and eye protection and equipment checks. Clear Base Glaze Effects can lighten a color; test the mixture. Use Extender only under applicable manufacturer limits. Do not combine water-based finishes with linseed or Danish oils. Treat the finish gently through cure and follow the final topcoat’s cure instructions. Clean tools promptly and dispose under local rules; do not pour leftovers down drains.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I glaze raw wood?\u003c\/strong\u003e Use a sealed surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the glaze protect the finish?\u003c\/strong\u003e No. A compatible clear topcoat protects the decorative color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a sample match my project?\u003c\/strong\u003e Undercoat, preparation and glaze amount affect the result; test first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mix Glaze Effects colors?\u003c\/strong\u003e Yes. GF says Glaze Effects colors can be intermixed for custom colors, and Glaze Effects Clear Base lightens a color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long before I topcoat?\u003c\/strong\u003e GF's directions say let it dry 3+ hours before a GF water-based topcoat at 70°F and 50% humidity, and 24+ hours before GF oil-based products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the finish:\u003c\/strong\u003e GF says Glaze Effects is decorative and always needs a clear topcoat, 3 coats in total, such as \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGeneral Finishes High Performance Topcoat, Clear Satin, Quart\u003c\/a\u003e ($41.95). A full kit of this pint, a \u003ca href=\"\/collections\/general-finishes-milk-paint\"\u003eMilk Paint\u003c\/a\u003e quart ($43.49) and the HP Satin quart comes to $106.44 and ships free. GF also cautions against any clear topcoat over white or light Milk Paint colors, because it may cause yellowing over wood.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673260425526,"sku":"PTSG","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016110865.jpg?v=1791582268"}],"url":"https:\/\/projectweekenddiy.com\/collections\/glaze-effects.oembed","provider":"Project Weekend DIY","version":"1.0","type":"link"}