{"title":"General Finishes Oil-Based Wood Stain","description":"\u003cp\u003eGeneral Finishes Oil-Based Wood Stain is a thin, wipe-on liquid stain for raw interior wood: cabinets, trim, doors and furniture. General Finishes makes it from oils, resins and pigments to bring out the natural grain. We carry it in half pints (about 45 to 50 sq ft) and quarts (about 180 to 200 sq ft).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply with a cotton rag, natural-bristle or foam brush, or staining pad, then wipe off the excess with the grain. Do not thin or spray.\u003c\/li\u003e\n\u003cli\u003eDry to the touch in 8+ hours; wait 24+ hours before a second coat.\u003c\/li\u003e\n\u003cli\u003eRaw wood only: General Finishes does not recommend it over pre-finished wood or other surfaces.\u003c\/li\u003e\n\u003cli\u003eSeal it with 3 coats of a General Finishes topcoat. Before a water-based topcoat, let the stain dry 72+ hours.\u003c\/li\u003e\n\u003cli\u003eOn pine, maple and other blotch-prone woods, General Finishes suggests \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGel Stain\u003c\/a\u003e, \u003ca href=\"\/collections\/general-finishes-water-based-wood-stain\"\u003eWater-Based Wood Stain\u003c\/a\u003e, or a first coat of \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003ePre-Stain Conditioner\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree shipping at $75. Free 30-day returns with a prepaid label on unopened cans. Sources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003etechnical data sheet (March 2020)\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"general-finishes-liquid-oil-stain-american-walnut-half-pint","title":"General Finishes Liquid Oil-Based Wood Stain, American Walnut, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in American Walnut, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003cli\u003ePFAS-free formula, per General Finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the American Walnut swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAmerican Walnut \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e539.093 g\/L in the American Walnut SDS, revised 2018-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eAWHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2018-06\/SDS-Liquid-Oil-Wood-Stain-American-Walnut-General-Finishes-US-HCS-2012-v4.7-2018-05-15.pdf\"\u003eAmerican Walnut safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blotch on pine or maple?\u003c\/strong\u003e It can. General Finishes says penetrating stains are thinner than gel stains and more prone to blotching. For pine or maple it recommends its Gel Stain or Water-Based Wood Stain; a first coat of Pre-Stain Conditioner Natural can also even the color, but it limits how much color soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. Unused, unopened cans can be returned within 30 days and we send a free prepaid return label. Opened stain can't be returned.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-american-walnut-quart\"\u003eAmerican Walnut Quart\u003c\/a\u003e. Other colors in a half pint: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-antique-cherry-half-pint\"\u003eAntique Cherry\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-candlelight-half-pint\"\u003eCandlelight\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-danish-teak-half-pint\"\u003eDanish Teak\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-flint-half-pint\"\u003eFlint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-honey-maple-half-pint\"\u003eHoney Maple\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mahogany-half-pint\"\u003eMahogany\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mocha-half-pint\"\u003eMocha\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-salem-half-pint\"\u003eSalem\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-slate-half-pint\"\u003eSlate\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-spiced-walnut-half-pint\"\u003eSpiced Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-warm-cherry-half-pint\"\u003eWarm Cherry\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/general-finishes-oil-based-wood-stain\"\u003eGeneral Finishes Oil-Based Wood Stain\u003c\/a\u003e. Blotch-prone wood? Start with \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e or use \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-arm-r-seal-wipe-on-topcoat-satin-quart\"\u003eArm-R-Seal Satin\u003c\/a\u003e (see \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-apply-general-finishes-arm-r-seal\"\u003ehow to apply Arm-R-Seal\u003c\/a\u003e) or a water-based \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e after 72+ hours.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Oil Based Wipe-on Liquid Penetrating Stain product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eOil Based Wood Stain technical data sheet (March 2020)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-liquid-oil-wood-stain-americ.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eAmerican Walnut safety data sheet (revised 2018-05-15)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256755510,"sku":"196-734","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104437.jpg?v=1791582162"},{"product_id":"general-finishes-liquid-oil-stain-american-walnut-quart","title":"General Finishes Liquid Oil-Based Wood Stain, American Walnut, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in American Walnut, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003cli\u003ePFAS-free formula, per General Finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the American Walnut swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAmerican Walnut \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e539.093 g\/L in the American Walnut SDS, revised 2018-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eAWQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2018-06\/SDS-Liquid-Oil-Wood-Stain-American-Walnut-General-Finishes-US-HCS-2012-v4.7-2018-05-15.pdf\"\u003eAmerican Walnut safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blotch on pine or maple?\u003c\/strong\u003e It can. General Finishes says penetrating stains are thinner than gel stains and more prone to blotching. For pine or maple it recommends its Gel Stain or Water-Based Wood Stain; a first coat of Pre-Stain Conditioner Natural can also even the color, but it limits how much color soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. Unused, unopened cans can be returned within 30 days and we send a free prepaid return label. Opened stain can't be returned.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-american-walnut-half-pint\"\u003eAmerican Walnut Half Pint\u003c\/a\u003e. Other colors in a quart: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-antique-cherry-quart\"\u003eAntique Cherry\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-danish-teak-quart\"\u003eDanish Teak\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-flint-quart\"\u003eFlint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mahogany-quart\"\u003eMahogany\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mocha-quart\"\u003eMocha\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-pecan-quart\"\u003ePecan\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-salem-quart\"\u003eSalem\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-slate-quart\"\u003eSlate\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-spiced-walnut-quart\"\u003eSpiced Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-warm-cherry-quart\"\u003eWarm Cherry\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/general-finishes-oil-based-wood-stain\"\u003eGeneral Finishes Oil-Based Wood Stain\u003c\/a\u003e. Blotch-prone wood? Start with \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e or use \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-arm-r-seal-wipe-on-topcoat-satin-quart\"\u003eArm-R-Seal Satin\u003c\/a\u003e (see \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-apply-general-finishes-arm-r-seal\"\u003ehow to apply Arm-R-Seal\u003c\/a\u003e) or a water-based \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e after 72+ hours.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Oil Based Wipe-on Liquid Penetrating Stain product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eOil Based Wood Stain technical data sheet (March 2020)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-liquid-oil-wood-stain-americ.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eAmerican Walnut safety data sheet (revised 2018-05-15)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256821046,"sku":"196-735","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104154.jpg?v=1791582164"},{"product_id":"general-finishes-liquid-oil-stain-antique-cherry-half-pint","title":"General Finishes Liquid Oil-Based Wood Stain, Antique Cherry, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Antique Cherry, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003cli\u003ePFAS-free formula, per General Finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Antique Cherry swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAntique Cherry \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e548.961 g\/L in the Antique Cherry SDS, revised 2018-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eACHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2018-06\/SDS-Liquid-Oil-Wood-Stain-Antique-Cherry-General-Finishes-US-HCS-2012-v4.7-2018-05-15.pdf\"\u003eAntique Cherry safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blotch on pine or maple?\u003c\/strong\u003e It can. General Finishes says penetrating stains are thinner than gel stains and more prone to blotching. For pine or maple it recommends its Gel Stain or Water-Based Wood Stain; a first coat of Pre-Stain Conditioner Natural can also even the color, but it limits how much color soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. Unused, unopened cans can be returned within 30 days and we send a free prepaid return label. Opened stain can't be returned.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-antique-cherry-quart\"\u003eAntique Cherry Quart\u003c\/a\u003e. Other colors in a half pint: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-american-walnut-half-pint\"\u003eAmerican Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-candlelight-half-pint\"\u003eCandlelight\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-danish-teak-half-pint\"\u003eDanish Teak\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-flint-half-pint\"\u003eFlint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-honey-maple-half-pint\"\u003eHoney Maple\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mahogany-half-pint\"\u003eMahogany\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mocha-half-pint\"\u003eMocha\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-salem-half-pint\"\u003eSalem\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-slate-half-pint\"\u003eSlate\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-spiced-walnut-half-pint\"\u003eSpiced Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-warm-cherry-half-pint\"\u003eWarm Cherry\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/general-finishes-oil-based-wood-stain\"\u003eGeneral Finishes Oil-Based Wood Stain\u003c\/a\u003e. Blotch-prone wood? Start with \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e or use \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-arm-r-seal-wipe-on-topcoat-satin-quart\"\u003eArm-R-Seal Satin\u003c\/a\u003e (see \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-apply-general-finishes-arm-r-seal\"\u003ehow to apply Arm-R-Seal\u003c\/a\u003e) or a water-based \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e after 72+ hours.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Oil Based Wipe-on Liquid Penetrating Stain product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eOil Based Wood Stain technical data sheet (March 2020)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-liquid-oil-wood-stain-antiqu.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eAntique Cherry safety data sheet (revised 2018-05-15)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256853814,"sku":"196-736","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104444.jpg?v=1791582166"},{"product_id":"general-finishes-liquid-oil-stain-antique-cherry-quart","title":"General Finishes Liquid Oil-Based Wood Stain, Antique Cherry, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Antique Cherry, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003cli\u003ePFAS-free formula, per General Finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Antique Cherry swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eAntique Cherry \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e548.961 g\/L in the Antique Cherry SDS, revised 2018-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eACQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2018-06\/SDS-Liquid-Oil-Wood-Stain-Antique-Cherry-General-Finishes-US-HCS-2012-v4.7-2018-05-15.pdf\"\u003eAntique Cherry safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blotch on pine or maple?\u003c\/strong\u003e It can. General Finishes says penetrating stains are thinner than gel stains and more prone to blotching. For pine or maple it recommends its Gel Stain or Water-Based Wood Stain; a first coat of Pre-Stain Conditioner Natural can also even the color, but it limits how much color soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. Unused, unopened cans can be returned within 30 days and we send a free prepaid return label. Opened stain can't be returned.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-antique-cherry-half-pint\"\u003eAntique Cherry Half Pint\u003c\/a\u003e. Other colors in a quart: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-american-walnut-quart\"\u003eAmerican Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-danish-teak-quart\"\u003eDanish Teak\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-flint-quart\"\u003eFlint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mahogany-quart\"\u003eMahogany\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mocha-quart\"\u003eMocha\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-pecan-quart\"\u003ePecan\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-salem-quart\"\u003eSalem\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-slate-quart\"\u003eSlate\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-spiced-walnut-quart\"\u003eSpiced Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-warm-cherry-quart\"\u003eWarm Cherry\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/general-finishes-oil-based-wood-stain\"\u003eGeneral Finishes Oil-Based Wood Stain\u003c\/a\u003e. Blotch-prone wood? Start with \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e or use \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-arm-r-seal-wipe-on-topcoat-satin-quart\"\u003eArm-R-Seal Satin\u003c\/a\u003e (see \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-apply-general-finishes-arm-r-seal\"\u003ehow to apply Arm-R-Seal\u003c\/a\u003e) or a water-based \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e after 72+ hours.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Oil Based Wipe-on Liquid Penetrating Stain product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eOil Based Wood Stain technical data sheet (March 2020)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-liquid-oil-wood-stain-antiqu.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eAntique Cherry safety data sheet (revised 2018-05-15)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256886582,"sku":"196-737","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104161.jpg?v=1791582168"},{"product_id":"general-finishes-liquid-oil-stain-candlelight-half-pint","title":"General Finishes Liquid Oil Stain, Candlelight, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Candlelight, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Candlelight swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eCandlelight \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e549.945 g\/L in the Candlelight SDS, revised 2018-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eCLHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2018-06\/SDS-Liquid-Oil-Wood-Stain-Candlelight-General-Finishes-US-HCS-2012-v4.7-2018-05-15.pdf\"\u003eCandlelight safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256919350,"sku":"196-738","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104451.jpg?v=1791582169"},{"product_id":"general-finishes-liquid-oil-stain-danish-teak-half-pint","title":"General Finishes Liquid Oil-Based Wood Stain, Danish Teak, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Danish Teak, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003cli\u003ePFAS-free formula, per General Finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Danish Teak swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eDanish Teak \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e549.942 g\/L in the Danish Teak SDS, revised 2018-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eDTHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2018-06\/SDS-Liquid-Oil-Wood-Stain-Danish-Teak-General-Finishes-US-HCS-2012-v4.7-2018-05-15.pdf\"\u003eDanish Teak safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blotch on pine or maple?\u003c\/strong\u003e It can. General Finishes says penetrating stains are thinner than gel stains and more prone to blotching. For pine or maple it recommends its Gel Stain or Water-Based Wood Stain; a first coat of Pre-Stain Conditioner Natural can also even the color, but it limits how much color soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. Unused, unopened cans can be returned within 30 days and we send a free prepaid return label. Opened stain can't be returned.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-danish-teak-quart\"\u003eDanish Teak Quart\u003c\/a\u003e. Other colors in a half pint: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-american-walnut-half-pint\"\u003eAmerican Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-antique-cherry-half-pint\"\u003eAntique Cherry\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-candlelight-half-pint\"\u003eCandlelight\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-flint-half-pint\"\u003eFlint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-honey-maple-half-pint\"\u003eHoney Maple\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mahogany-half-pint\"\u003eMahogany\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mocha-half-pint\"\u003eMocha\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-salem-half-pint\"\u003eSalem\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-slate-half-pint\"\u003eSlate\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-spiced-walnut-half-pint\"\u003eSpiced Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-warm-cherry-half-pint\"\u003eWarm Cherry\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/general-finishes-oil-based-wood-stain\"\u003eGeneral Finishes Oil-Based Wood Stain\u003c\/a\u003e. Blotch-prone wood? Start with \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e or use \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-arm-r-seal-wipe-on-topcoat-satin-quart\"\u003eArm-R-Seal Satin\u003c\/a\u003e (see \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-apply-general-finishes-arm-r-seal\"\u003ehow to apply Arm-R-Seal\u003c\/a\u003e) or a water-based \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e after 72+ hours.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Oil Based Wipe-on Liquid Penetrating Stain product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eOil Based Wood Stain technical data sheet (March 2020)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-liquid-oil-wood-stain-danish.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eDanish Teak safety data sheet (revised 2018-05-15)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257181494,"sku":"196-740","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104468.jpg?v=1791582172"},{"product_id":"general-finishes-liquid-oil-stain-danish-teak-quart","title":"General Finishes Liquid Oil-Based Wood Stain, Danish Teak, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Danish Teak, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003cli\u003ePFAS-free formula, per General Finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Danish Teak swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eDanish Teak \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e549.942 g\/L in the Danish Teak SDS, revised 2018-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eDTQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2018-06\/SDS-Liquid-Oil-Wood-Stain-Danish-Teak-General-Finishes-US-HCS-2012-v4.7-2018-05-15.pdf\"\u003eDanish Teak safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blotch on pine or maple?\u003c\/strong\u003e It can. General Finishes says penetrating stains are thinner than gel stains and more prone to blotching. For pine or maple it recommends its Gel Stain or Water-Based Wood Stain; a first coat of Pre-Stain Conditioner Natural can also even the color, but it limits how much color soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. Unused, unopened cans can be returned within 30 days and we send a free prepaid return label. Opened stain can't be returned.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-danish-teak-half-pint\"\u003eDanish Teak Half Pint\u003c\/a\u003e. Other colors in a quart: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-american-walnut-quart\"\u003eAmerican Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-antique-cherry-quart\"\u003eAntique Cherry\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-flint-quart\"\u003eFlint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mahogany-quart\"\u003eMahogany\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mocha-quart\"\u003eMocha\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-pecan-quart\"\u003ePecan\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-salem-quart\"\u003eSalem\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-slate-quart\"\u003eSlate\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-spiced-walnut-quart\"\u003eSpiced Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-warm-cherry-quart\"\u003eWarm Cherry\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/general-finishes-oil-based-wood-stain\"\u003eGeneral Finishes Oil-Based Wood Stain\u003c\/a\u003e. Blotch-prone wood? Start with \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e or use \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-arm-r-seal-wipe-on-topcoat-satin-quart\"\u003eArm-R-Seal Satin\u003c\/a\u003e (see \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-apply-general-finishes-arm-r-seal\"\u003ehow to apply Arm-R-Seal\u003c\/a\u003e) or a water-based \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e after 72+ hours.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Oil Based Wipe-on Liquid Penetrating Stain product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eOil Based Wood Stain technical data sheet (March 2020)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-liquid-oil-wood-stain-danish.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eDanish Teak safety data sheet (revised 2018-05-15)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257214262,"sku":"196-741","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104185.jpg?v=1791582174"},{"product_id":"general-finishes-liquid-oil-stain-honey-maple-half-pint","title":"General Finishes Liquid Oil Stain, Honey Maple, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Honey Maple, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Honey Maple swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eHoney Maple \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e553.543 g\/L in the Honey Maple SDS, revised 2018-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eHMHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2018-06\/SDS-Liquid-Oil-Wood-Stain-Honey-Maple-General-Finishes-US-HCS-2012-v4.7-2018-05-15_0.pdf\"\u003eHoney Maple safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257279798,"sku":"196-744","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104482.jpg?v=1791730297"},{"product_id":"general-finishes-liquid-oil-stain-mahogany-half-pint","title":"General Finishes Liquid Oil-Based Wood Stain, Mahogany, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Mahogany, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003cli\u003ePFAS-free formula, per General Finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Mahogany swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMahogany \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e540 g\/L in the Mahogany SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eMAHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice.  Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-09\/SDS-Oil-Based-Stain-Liquid-Mahogany-General%20Finishes-US-HCS-2012-v4-2021-05-15.pdf\"\u003eMahogany safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blotch on pine or maple?\u003c\/strong\u003e It can. General Finishes says penetrating stains are thinner than gel stains and more prone to blotching. For pine or maple it recommends its Gel Stain or Water-Based Wood Stain; a first coat of Pre-Stain Conditioner Natural can also even the color, but it limits how much color soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. Unused, unopened cans can be returned within 30 days and we send a free prepaid return label. Opened stain can't be returned.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mahogany-quart\"\u003eMahogany Quart\u003c\/a\u003e. Other colors in a half pint: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-american-walnut-half-pint\"\u003eAmerican Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-antique-cherry-half-pint\"\u003eAntique Cherry\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-candlelight-half-pint\"\u003eCandlelight\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-danish-teak-half-pint\"\u003eDanish Teak\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-flint-half-pint\"\u003eFlint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-honey-maple-half-pint\"\u003eHoney Maple\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mocha-half-pint\"\u003eMocha\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-salem-half-pint\"\u003eSalem\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-slate-half-pint\"\u003eSlate\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-spiced-walnut-half-pint\"\u003eSpiced Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-warm-cherry-half-pint\"\u003eWarm Cherry\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/general-finishes-oil-based-wood-stain\"\u003eGeneral Finishes Oil-Based Wood Stain\u003c\/a\u003e. Blotch-prone wood? Start with \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e or use \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-arm-r-seal-wipe-on-topcoat-satin-quart\"\u003eArm-R-Seal Satin\u003c\/a\u003e (see \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-apply-general-finishes-arm-r-seal\"\u003ehow to apply Arm-R-Seal\u003c\/a\u003e) or a water-based \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e after 72+ hours.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Oil Based Wipe-on Liquid Penetrating Stain product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eOil Based Wood Stain technical data sheet (March 2020)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-d-stain-liquid-mahogany.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eMahogany safety data sheet (revised 2021-05-15)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257345334,"sku":"196-746","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104505.jpg?v=1791582177"},{"product_id":"general-finishes-liquid-oil-stain-mahogany-quart","title":"General Finishes Liquid Oil-Based Wood Stain, Mahogany, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Mahogany, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003cli\u003ePFAS-free formula, per General Finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Mahogany swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMahogany \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e540 g\/L in the Mahogany SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eMAQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice.  Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-09\/SDS-Oil-Based-Stain-Liquid-Mahogany-General%20Finishes-US-HCS-2012-v4-2021-05-15.pdf\"\u003eMahogany safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blotch on pine or maple?\u003c\/strong\u003e It can. General Finishes says penetrating stains are thinner than gel stains and more prone to blotching. For pine or maple it recommends its Gel Stain or Water-Based Wood Stain; a first coat of Pre-Stain Conditioner Natural can also even the color, but it limits how much color soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. Unused, unopened cans can be returned within 30 days and we send a free prepaid return label. Opened stain can't be returned.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mahogany-half-pint\"\u003eMahogany Half Pint\u003c\/a\u003e. Other colors in a quart: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-american-walnut-quart\"\u003eAmerican Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-antique-cherry-quart\"\u003eAntique Cherry\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-danish-teak-quart\"\u003eDanish Teak\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-flint-quart\"\u003eFlint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mocha-quart\"\u003eMocha\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-pecan-quart\"\u003ePecan\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-salem-quart\"\u003eSalem\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-slate-quart\"\u003eSlate\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-spiced-walnut-quart\"\u003eSpiced Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-warm-cherry-quart\"\u003eWarm Cherry\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/general-finishes-oil-based-wood-stain\"\u003eGeneral Finishes Oil-Based Wood Stain\u003c\/a\u003e. Blotch-prone wood? Start with \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e or use \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-arm-r-seal-wipe-on-topcoat-satin-quart\"\u003eArm-R-Seal Satin\u003c\/a\u003e (see \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-apply-general-finishes-arm-r-seal\"\u003ehow to apply Arm-R-Seal\u003c\/a\u003e) or a water-based \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e after 72+ hours.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Oil Based Wipe-on Liquid Penetrating Stain product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eOil Based Wood Stain technical data sheet (March 2020)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-d-stain-liquid-mahogany.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eMahogany safety data sheet (revised 2021-05-15)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257378102,"sku":"196-747","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104222.jpg?v=1791582180"},{"product_id":"general-finishes-liquid-oil-stain-pecan-quart","title":"General Finishes Liquid Oil Stain, Pecan, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Pecan, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Pecan swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003ePecan \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e550 g\/L in the Pecan SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003ePEQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-09\/SDS-Oil-Based-Stain-Liquid-Pecan-General%20Finishes-US-HCS-2012-v4-2021-05-15.pdf\"\u003ePecan safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257410870,"sku":"196-749","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104246.jpg?v=1791582181"},{"product_id":"general-finishes-liquid-oil-stain-salem-half-pint","title":"General Finishes Liquid Oil Stain, Salem, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Salem, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Salem swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSalem \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e540 g\/L in the Salem SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eSAHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice.  Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-09\/SDS-Oil-Based-Stain-Liquid-Salem-General%20Finishes-US-HCS-2012-v4-2021-05-15.pdf\"\u003eSalem safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257443638,"sku":"196-750","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104536.jpg?v=1791582183"},{"product_id":"general-finishes-liquid-oil-stain-salem-quart","title":"General Finishes Liquid Oil Stain, Salem, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Salem, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Salem swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSalem \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e540 g\/L in the Salem SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eSAQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice.  Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-09\/SDS-Oil-Based-Stain-Liquid-Salem-General%20Finishes-US-HCS-2012-v4-2021-05-15.pdf\"\u003eSalem safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257509174,"sku":"196-751","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104253.jpg?v=1791582185"},{"product_id":"general-finishes-liquid-oil-stain-spiced-walnut-half-pint","title":"General Finishes Liquid Oil-Based Wood Stain, Spiced Walnut, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Spiced Walnut, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003cli\u003ePFAS-free formula, per General Finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Spiced Walnut swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSpiced Walnut \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e532 g\/L in the Spiced Walnut SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eSWHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-09\/SDS-Oil-Based-Stain-Liquid-Spiced-Walnut-General%20Finishes-US-HCS-2012-v4-2021-05-15.pdf\"\u003eSpiced Walnut safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blotch on pine or maple?\u003c\/strong\u003e It can. General Finishes says penetrating stains are thinner than gel stains and more prone to blotching. For pine or maple it recommends its Gel Stain or Water-Based Wood Stain; a first coat of Pre-Stain Conditioner Natural can also even the color, but it limits how much color soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. Unused, unopened cans can be returned within 30 days and we send a free prepaid return label. Opened stain can't be returned.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-spiced-walnut-quart\"\u003eSpiced Walnut Quart\u003c\/a\u003e. Other colors in a half pint: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-american-walnut-half-pint\"\u003eAmerican Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-antique-cherry-half-pint\"\u003eAntique Cherry\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-candlelight-half-pint\"\u003eCandlelight\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-danish-teak-half-pint\"\u003eDanish Teak\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-flint-half-pint\"\u003eFlint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-honey-maple-half-pint\"\u003eHoney Maple\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mahogany-half-pint\"\u003eMahogany\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mocha-half-pint\"\u003eMocha\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-salem-half-pint\"\u003eSalem\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-slate-half-pint\"\u003eSlate\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-warm-cherry-half-pint\"\u003eWarm Cherry\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/general-finishes-oil-based-wood-stain\"\u003eGeneral Finishes Oil-Based Wood Stain\u003c\/a\u003e. Blotch-prone wood? Start with \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e or use \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-arm-r-seal-wipe-on-topcoat-satin-quart\"\u003eArm-R-Seal Satin\u003c\/a\u003e (see \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-apply-general-finishes-arm-r-seal\"\u003ehow to apply Arm-R-Seal\u003c\/a\u003e) or a water-based \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e after 72+ hours.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Oil Based Wipe-on Liquid Penetrating Stain product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eOil Based Wood Stain technical data sheet (March 2020)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-d-stain-liquid-spiced-walnut.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eSpiced Walnut safety data sheet (revised 2021-05-15)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257541942,"sku":"196-752","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104543.jpg?v=1791582187"},{"product_id":"general-finishes-liquid-oil-stain-spiced-walnut-quart","title":"General Finishes Liquid Oil-Based Wood Stain, Spiced Walnut, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Spiced Walnut, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $75, no code needed (lower 48 + DC). Free 30-day returns with a prepaid label. Returned items must be unused and unopened; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003cli\u003ePFAS-free formula, per General Finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Spiced Walnut swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSpiced Walnut \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e532 g\/L in the Spiced Walnut SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eSWQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-09\/SDS-Oil-Based-Stain-Liquid-Spiced-Walnut-General%20Finishes-US-HCS-2012-v4-2021-05-15.pdf\"\u003eSpiced Walnut safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it blotch on pine or maple?\u003c\/strong\u003e It can. General Finishes says penetrating stains are thinner than gel stains and more prone to blotching. For pine or maple it recommends its Gel Stain or Water-Based Wood Stain; a first coat of Pre-Stain Conditioner Natural can also even the color, but it limits how much color soaks in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. Unused, unopened cans can be returned within 30 days and we send a free prepaid return label. Opened stain can't be returned.\u003c\/p\u003e\n\u003ch3\u003eShop related\u003c\/h3\u003e\n\u003cp\u003eSame color, other size: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-spiced-walnut-half-pint\"\u003eSpiced Walnut Half Pint\u003c\/a\u003e. Other colors in a quart: \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-american-walnut-quart\"\u003eAmerican Walnut\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-antique-cherry-quart\"\u003eAntique Cherry\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-danish-teak-quart\"\u003eDanish Teak\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-flint-quart\"\u003eFlint\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mahogany-quart\"\u003eMahogany\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-mocha-quart\"\u003eMocha\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-pecan-quart\"\u003ePecan\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-salem-quart\"\u003eSalem\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-slate-quart\"\u003eSlate\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-liquid-oil-stain-warm-cherry-quart\"\u003eWarm Cherry\u003c\/a\u003e. See every color in \u003ca href=\"\/collections\/general-finishes-oil-based-wood-stain\"\u003eGeneral Finishes Oil-Based Wood Stain\u003c\/a\u003e. Blotch-prone wood? Start with \u003ca href=\"\/collections\/pre-stain-wood-conditioner\"\u003epre-stain wood conditioner\u003c\/a\u003e or use \u003ca href=\"\/collections\/general-finishes-gel-stain\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-arm-r-seal-wipe-on-topcoat-satin-quart\"\u003eArm-R-Seal Satin\u003c\/a\u003e (see \u003ca href=\"\/blogs\/lcb-paint-supply\/how-to-apply-general-finishes-arm-r-seal\"\u003ehow to apply Arm-R-Seal\u003c\/a\u003e) or a water-based \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e after 72+ hours.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/oil-based-wood-stains-sealers\/oil-based-penetrating-wood-stains\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Oil Based Wipe-on Liquid Penetrating Stain product page\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2020-03-liquid-d-stain.pdf?v=1791748625\" target=\"_blank\" rel=\"noopener\"\u003eOil Based Wood Stain technical data sheet (March 2020)\u003c\/a\u003e; \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-d-stain-liquid-spiced-walnut.pdf?v=1791748626\" target=\"_blank\" rel=\"noopener\"\u003eSpiced Walnut safety data sheet (revised 2021-05-15)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257574710,"sku":"196-753","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104260.jpg?v=1791582189"},{"product_id":"general-finishes-liquid-oil-stain-warm-cherry-half-pint","title":"General Finishes Liquid Oil Stain, Warm Cherry, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Warm Cherry, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Warm Cherry swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eWarm Cherry \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e545 g\/L in the Warm Cherry SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eCHHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-09\/SDS-Oil-Based-Stain-Liquid-Warm-Cherry-General%20Finishes-US-HCS-2012-v4-2021-05-15.pdf\"\u003eWarm Cherry safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257836854,"sku":"196-754","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104550.jpg?v=1791582191"},{"product_id":"general-finishes-liquid-oil-stain-warm-cherry-quart","title":"General Finishes Liquid Oil Stain, Warm Cherry, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Warm Cherry, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Warm Cherry swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eWarm Cherry \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e545 g\/L in the Warm Cherry SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eCHQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-09\/SDS-Oil-Based-Stain-Liquid-Warm-Cherry-General%20Finishes-US-HCS-2012-v4-2021-05-15.pdf\"\u003eWarm Cherry safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673257869622,"sku":"196-755","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016104277.jpg?v=1791582193"},{"product_id":"general-finishes-liquid-oil-stain-flint-half-pint","title":"General Finishes Liquid Oil Stain, Flint, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Flint, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Flint swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eFlint \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e518 g\/L in the Flint SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eFLHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-04\/SDS-Oil-Based-Stain-Liquid-Flint-General%20Finishes-US-HCS-2012-v2-2021-05-15.pdf\"\u003eFlint safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673259934006,"sku":"197-100","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016120123.jpg?v=1791582255"},{"product_id":"general-finishes-liquid-oil-stain-flint-quart","title":"General Finishes Liquid Oil Stain, Flint, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Flint, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Flint swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eFlint \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e518 g\/L in the Flint SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eFLQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-04\/SDS-Oil-Based-Stain-Liquid-Flint-General%20Finishes-US-HCS-2012-v2-2021-05-15.pdf\"\u003eFlint safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673259966774,"sku":"197-101","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016120130.jpg?v=1791582257"},{"product_id":"general-finishes-liquid-oil-stain-mocha-half-pint","title":"General Finishes Liquid Oil Stain, Mocha, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Mocha, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Mocha swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMocha \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e513 g\/L in the Mocha SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eMOHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice.  Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-04\/SDS-Oil-Based-Stain-Liquid-Mocha-General%20Finishes-US-HCS-2012-v2-2021-05-15.pdf\"\u003eMocha safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673259999542,"sku":"197-102","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016120147.jpg?v=1791582259"},{"product_id":"general-finishes-liquid-oil-stain-mocha-quart","title":"General Finishes Liquid Oil Stain, Mocha, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Mocha, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Mocha swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eMocha \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e513 g\/L in the Mocha SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eMOQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice.  Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-04\/SDS-Oil-Based-Stain-Liquid-Mocha-General%20Finishes-US-HCS-2012-v2-2021-05-15.pdf\"\u003eMocha safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673260032310,"sku":"197-103","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016120154.jpg?v=1791582261"},{"product_id":"general-finishes-liquid-oil-stain-slate-half-pint","title":"General Finishes Liquid Oil Stain, Slate, Half Pint","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Slate, Half Pint, brings penetrating, wipe-on color to raw interior wood. This half-pint can covers about 45–50 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Slate swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSlate \/ Half Pint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 45–50 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e505 g\/L in the Slate SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eSLHP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-04\/SDS-Oil-Based-Stain-Liquid-Slate-General%20Finishes-US-HCS-2012-v2-2021-05-15.pdf\"\u003eSlate safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673260228918,"sku":"197-104","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016120161.jpg?v=1791582263"},{"product_id":"general-finishes-liquid-oil-stain-slate-quart","title":"General Finishes Liquid Oil Stain, Slate, Quart","description":"\u003cp\u003eGeneral Finishes Liquid Oil Stain in Slate, Quart, brings penetrating, wipe-on color to raw interior wood. This quart can covers about 180–200 sq ft, depending on the wood and application. Test the full stain-and-topcoat combination first: species, preparation and topcoat affect the final color.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThin liquid stain accentuates the wood's natural grain.\u003c\/li\u003e\n\u003cli\u003eWipe-on application suits furniture, cabinet parts and detailed trim.\u003c\/li\u003e\n\u003cli\u003eA second coat can deepen color after the first dries fully.\u003c\/li\u003e\n\u003cli\u003eAccepts a compatible oil- or water-based topcoat with the required drying time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRaw wood furniture, cabinets, doors and trim indoors. Compare the Slate swatches on different woods, then test on your project. This penetrating stain is not for an existing finish or a non-wood surface.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ size\u003c\/th\u003e\n\u003ctd\u003eSlate \/ Quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase \/ use\u003c\/th\u003e\n\u003ctd\u003eOil-based pigmented liquid stain \/ interior raw wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAbout 180–200 sq ft per can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry \/ recoat\u003c\/th\u003e\n\u003ctd\u003e8 hours or longer \/ 24 hours or longer, when fully dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo duration specified; manufacturer TDS lists N\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1–2 stain coats, then 3 compatible General Finishes topcoat coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eCotton rag, natural-bristle or foam brush, staining pad; do not spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning \/ cleanup\u003c\/th\u003e\n\u003ctd\u003eDo not thin \/ mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e505 g\/L in the Slate SDS, revised 2021-05-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eSLQT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSand open-grain wood with 120, then 150, then 180 grit; sand closed-grain wood no finer than 180 grit. Remove dust and test color. Over-sanding limits absorption.\u003c\/li\u003e\n\u003cli\u003eVentilate and stir thoroughly before and throughout use. Finish one manageable section at a time. Apply an even wet coat, then wipe excess with the grain. Pull pools from details. Correct lap marks immediately by rewetting the whole working area and wiping again.\u003c\/li\u003e\n\u003cli\u003eAllow at least 24 hours before another stain coat. These times assume about 70°F and 50% humidity; wait longer if cool, humid or tacky.\u003c\/li\u003e\n\u003cli\u003eSeal fully dry stain with three coats of a compatible topcoat. Wait at least 72 hours, and until fully dry, before applying a water-based topcoat over this oil stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eOn blotch-prone wood, a separate initial coat of Pre-Stain Conditioner Natural may improve uniformity but reduces color absorption. Oil-based topcoats can amber; test your choice. This dated SDS VOC value differs from the current manufacturer web chart. Confirm the matching can and data before choosing for a VOC limit. Read the \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-04\/SDS-Oil-Based-Stain-Liquid-Slate-General%20Finishes-US-HCS-2012-v2-2021-05-15.pdf\"\u003eSlate safety data sheet\u003c\/a\u003e and label. \u003cstrong\u003eDANGER:\u003c\/strong\u003e flammable liquid and vapor; may cause cancer; may be fatal if swallowed and entering airways. Follow label protection and ventilation instructions. Immediately put soaked applicators in a sealed, water-filled metal container; follow local fire disposal rules.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stain an already finished cabinet?\u003c\/strong\u003e No. This product requires raw wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the swatch as a guaranteed color match?\u003c\/strong\u003e No. Species, sanding and topcoat change the result; test the full finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a topcoat?\u003c\/strong\u003e Yes, three compatible General Finishes topcoat coats after full drying.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673260294454,"sku":"197-105","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016120178.jpg?v=1791582265"}],"url":"https:\/\/projectweekenddiy.com\/collections\/general-finishes-oil-based-wood-stain.oembed","provider":"Project Weekend DIY","version":"1.0","type":"link"}