{"title":"General Finishes Enduro","description":"\u003cp\u003eGeneral Finishes Enduro is the professional water-based spray system for cabinets, millwork and furniture: Clear Poly, White Poly, White Undercoat, Pre-Cat Lacquer, Conversion Varnish, Enduro-Var II and RTM stains. Most of the line is engineered for spraying (Enduro-Var II can also be brushed or rolled); for brushable white cabinet paint see Brushable White Enamel, and for DIY clear coats see High Performance.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch2\u003eWhich Enduro product do I need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eWhat it is (GF)\u003c\/th\u003e\n\u003cth\u003eDry and cure (GF, 70°F \/ 50% RH)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/general-finishes-enduro-clear-polyurethane-satin-gallon\"\u003eEnduro Clear Poly\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-based acrylic\/urethane clear topcoat for interior cabinets, trim and furniture; no sealer required; 3-4 coats\u003c\/td\u003e\n\u003ctd\u003eRecoat 2 hr (TDS); cure 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/general-finishes-enduro-water-based-white-poly-satin-gallon\"\u003eEnduro White Poly\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003ePigmented white water-based finish for cabinets and millwork; no topcoat required\u003c\/td\u003e\n\u003ctd\u003eRecoat 1+ hr; cure 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/general-finishes-enduro-white-undercoat-sanding-sealer-gallon\"\u003eEnduro White Undercoat\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-build white primer under white and light finishes; physical barrier only (use Stain Blocker for tannin bleed)\u003c\/td\u003e\n\u003ctd\u003eRecoat 1+ hr; topcoat required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/general-finishes-enduro-pre-cat-lacquer-clear-satin-gallon\"\u003eEnduro Pre-Cat Lacquer\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-based self-crosslinking lacquer; Medium durability at a lower price\u003c\/td\u003e\n\u003ctd\u003eRecoat 1+ hr; stack after 12 hr; cure 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/general-finishes-enduro-conversion-varnish-clear-satin-gallon\"\u003eEnduro Conversion Varnish\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2K water-based varnish for high-use cabinets, vanities and bar tops; needs GF NCO Catalyst (sold separately)\u003c\/td\u003e\n\u003ctd\u003ePot life about 6 hr; light use 72 hr; cure 7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-quart\"\u003eEnduro-Var II\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-based urethane with a warm amber tone; brush, roll or spray; interior only\u003c\/td\u003e\n\u003ctd\u003e2+ hr between coats; cure 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/lacquer-wood-finish\"\u003elacquer wood finish\u003c\/a\u003e, \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e, \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e, \u003ca href=\"\/collections\/general-finishes\"\u003eall General Finishes\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"general-finishes-enduro-extender-clear-pint","title":"General Finishes Enduro Extender Clear Pint","description":"\u003ch2\u003eExtender, 16 oz bottle\u003c\/h2\u003e\n\u003cp\u003eWhen a water-based finish starts to set before it has leveled, you see lap lines, brush marks and streaks. General Finishes Extender is a slow-drying solvent made to fix that: added to any GF water-based product, it lengthens dry time and lowers viscosity, which GF says helps when finishing large areas or working somewhere warm or dry. GF also highly recommends it with Glaze Effects. Use it only in water-based products, never oil-based. A pint treats a lot of finish: at the 5% starting rate that is about 1.5 oz per quart, so 16 oz handles roughly ten quarts.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShip time:\u003c\/strong\u003e Orders usually ship in 2 to 4 business days, then standard delivery takes 3 to 7 business days, so plan on about 1 to 2 weeks. $5.99 shipping, free at $35+ (lower 48 + DC). \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e$5.99 shipping, free at $35+, no code needed (lower 48 + DC). 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eDosing chart (GF TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eRate by volume\u003c\/th\u003e\n\u003cth\u003ePer quart of finish\u003c\/th\u003e\n\u003cth\u003eWhen\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5%\u003c\/td\u003e\n\u003ctd\u003eabout 1.5 oz\u003c\/td\u003e\n\u003ctd\u003eStarting point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10%\u003c\/td\u003e\n\u003ctd\u003eabout 3 oz\u003c\/td\u003e\n\u003ctd\u003eGF's High Performance tip above 80 F or below 70% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15% maximum\u003c\/td\u003e\n\u003ctd\u003eabout 5 oz\u003c\/td\u003e\n\u003ctd\u003eDo not exceed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVOC-regulated areas\u003c\/h3\u003e\n\u003cp\u003eExtender itself is listed at 1.025 kg\/L on the TDS, so adding it raises the VOC of the finish. GF says it may be used in regulated areas only as long as the finished mix stays under the legal limit for that product. In California, more than 2% added to High Performance makes it non-compliant with SCAQMD rules.\u003c\/p\u003e\n\u003ch3\u003eOther uses and handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDampen a cloth or paper towel with Extender to lift freshly applied, dry Glaze Effects.\u003c\/li\u003e\n\u003cli\u003eStore above 50 F and below 80 F, tightly sealed; best within a year of the can date, and unopened stock can conservatively last up to 5 years.\u003c\/li\u003e\n\u003cli\u003eWash hands with soap and water; clean equipment with GF Brush \u0026amp; Gun Cleaner. Don't pour leftovers down the drain.\u003c\/li\u003e\n\u003cli\u003eThe opposite problem, finish drying too slowly in cool or humid air, is what GF Accelerator is for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed less? There is a \u003ca href=\"\/products\/general-finishes-enduro-water-based-extender-clear-4-oz\"\u003e4 oz bottle\u003c\/a\u003e. Pair it with \u003ca href=\"\/products\/general-finishes-glaze-effects-clear-base-pint\"\u003eGlaze Effects\u003c\/a\u003e or the \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eHigh Performance topcoat\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eManufacturer part number: EXPT\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow much Extender do I add?\u003c\/strong\u003e The GF technical data sheet says to start at 5% by volume, about 1.5 oz per quart, stir thoroughly, and add more if needed without going past 15% by volume, about 5 oz per quart. For High Performance, GF's directions use 10 to 15% where local rules allow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen is it worth adding Extender?\u003c\/strong\u003e GF recommends it for large areas and for warm or dry conditions. For High Performance specifically, GF suggests adding 10% when the room is above 80 F or below 70% humidity, to help brush strokes level out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes Extender shorten the shelf life of my finish?\u003c\/strong\u003e No. The TDS says Extender does not affect the shelf life of a product it has been added to. Store it between 50 and 80 F out of direct sun with the cap tight.\u003c\/p\u003e\n\u003cp\u003eExtender facts: the \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/wood-finishing-additives-miscellaneous\/extender\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Extender page\u003c\/a\u003e, the GF Extender technical data sheet (March 2020), the \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-topcoats-and-sanding-sealer\/high-performance-polyurethane-water\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes High Performance page\u003c\/a\u003e and GF's \u003ca href=\"https:\/\/generalfinishes.com\/faq\/how-do-i-remove-brush-strokes-3rd-coat-high-performance-polyurethane\" target=\"_blank\" rel=\"noopener\"\u003ebrush-stroke FAQ\u003c\/a\u003e. Shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53528045748534,"sku":"196-728","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016107117.jpg?v=1767459463"},{"product_id":"general-finishes-enduro-poly-clear-dead-flat-gallon","title":"General Finishes Enduro Clear Poly, Dead Flat, Gallon","description":"\u003ch2\u003eGeneral Finishes Enduro Clear Poly Dead Flat Gallon\u003c\/h2\u003e\n\u003cp\u003eEnduro Clear Poly is General Finishes' professional-grade water-based topcoat, a self-crosslinking 1K acrylic and urethane blend that dries clear and builds a tough, abrasion-resistant film on interior cabinets, trim, doors and furniture. The Dead Flat sheen (under 5 on the gloss scale) gives a near-raw-wood look without the traditional flattening compounds that can cloud a finish. This is the 1 gallon can.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional water-based poly, low odor, soap and water hand cleanup\u003c\/li\u003e\n\u003cli\u003eDead Flat sheen, under 5 on the gloss scale\u003c\/li\u003e\n\u003cli\u003eUse over raw wood, fully dry stain, and non-white painted surfaces\u003c\/li\u003e\n\u003cli\u003eCan be used without a sealer; 1 to 2 coats of GF Sanding Sealer add faster build\u003c\/li\u003e\n\u003cli\u003eShort-filled about 10% to leave room for zero-VOC tint colorant\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II VOC rules\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based acrylic\/urethane blend, 1K (no hardener)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eDead Flat (under 5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior cabinets, trim, doors, furniture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003e3 to 4 total coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness\u003c\/th\u003e\n\u003ctd\u003e3 to 5 mils wet per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time (70 F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch: 30 minutes. Recoat: 2 hours. Full cure: 21 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003ePencil F, Koenig 72, Sward 12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eMedium, 350 to 450 cPs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpray setup\u003c\/th\u003e\n\u003ctd\u003eHVLP 1.1 to 1.3 mm; air-assisted airless 600 PSI pump, 20 PSI assist air, .011 in tip; airless fine finish .007 to .011 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eDistilled water (start at 5%, up to 10% by volume), GF Extender for open time, GF Accelerator for humid shops\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eHands: soap and water. Equipment: GF Brush and Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 233 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB744-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrep raw wood by sanding no finer than 220 grit and removing dust. For an existing finish, clean with a 50:50 mix of denatured alcohol and water on a maroon non-woven pad, let dry 1 to 2 hours, then scuff with a 220 to 320 grit foam pad.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Strain before spraying and lay down wet coats of 3 to 5 mils.\u003c\/li\u003e\n\u003cli\u003eEnduro is engineered for spraying. Cabinet face frames, edges and drawer fronts can be rolled with a small 3\/8 in nap microfiber roller; adding 10% to 20% GF Extender helps leveling.\u003c\/li\u003e\n\u003cli\u003eSand lightly between coats with a 220 to 320 grit foam pad and remove dust. Over oil-based stain, let the stain dry at least 72 hours first.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eDo not use any clear coat, including this one, over white or light paints such as GF Milk Paint whites, because it can yellow. Use Enduro White Poly for white finishes. Store above 50 F and below 80 F, out of direct sun; best used within one year of the date on the can. Read the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-tds-2023-02-enduro-clear-poly.pdf?v=1791748626\"\u003etechnical data sheet\u003c\/a\u003e and \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/generalfinishes-sds-enduro-clear-poly-dead-flat.pdf?v=1791748625\"\u003esafety data sheet\u003c\/a\u003e before use.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I brush or roll Enduro Clear Poly?\u003c\/strong\u003e General Finishes engineers Enduro Clear Poly for spraying (HVLP 1.1-1.3 mm, air-assisted airless or airless). Face frames, edges and drawer fronts can be rolled with a short-nap or foam roller; GF suggests adding 10-20% GF Extender to help it level. For an all-brush project, GF High Performance Topcoat is the brushable choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a sealer?\u003c\/strong\u003e No. It can go straight onto raw wood. For faster build, GF suggests 1-2 coats of GF Sanding Sealer first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e GF recommends 3-4 total coats, 3-5 mils wet each. At 70°F and 50% humidity the TDS lists dry to touch in 30 minutes and recoat in 2 hours (the product page says 1-2 hours); full cure takes 21 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it over white or light paint?\u003c\/strong\u003e No. GF warns that any clear coat, including this one, can yellow over white or light paints. Use Enduro White Poly or GF Brushable White Enamel for white finishes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eShop more in \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e, compare \u003ca href=\"\/products\/general-finishes-enduro-clear-polyurethane-satin-gallon\"\u003eEnduro Clear Poly Satin\u003c\/a\u003e, add \u003ca href=\"\/products\/general-finishes-enduro-extender-clear-pint\"\u003eEnduro Extender\u003c\/a\u003e for longer open time, or see \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGF High Performance\u003c\/a\u003e for brushing. Planning a kitchen? Start with the \u003ca href=\"\/pages\/paint-cabinets-project-cart\"\u003ecabinet project cart\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53595008172342,"sku":"197-300","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/gal-general-finishes-enduro-poly-clear-dead-flat-4952475.jpg?v=1769119938"},{"product_id":"general-finishes-enduro-2k-polyurethane-clear-satin-gallon","title":"General Finishes Enduro 2K Polyurethane Clear Satin Gallon","description":"\u003cp\u003eFor shops that need a tougher sprayed finish than a single-component waterborne, General Finishes makes Enduro Tintable 2K Clear Poly. This gallon is the satin sheen. It is a 2-component water-based urethane\/acrylic blend: you add Enduro NCO Catalyst at 10% by volume before spraying, and the cured film has high chemical and water resistance. GF lists it for cabinets, trim, doors, furniture, table tops and bar tops, inside or out.\u003c\/p\u003e\n\u003cp\u003eFree shipping at $35, no code needed (lower 48 + DC). 30-day returns on unused, unopened items; opened paint can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003e2-component, water-based urethane\/acrylic blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin (30); also made in flat, semi-gloss and gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalyst\u003c\/th\u003e\n\u003ctd\u003eEnduro NCO Catalyst A152 at 10% by volume: 12.8 oz per gallon, 3.2 oz per quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eAbout 4 hours once mixed (varies with colorant dosage)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eSpray only: HVLP 1.1-1.3 mm; air-assist airless 375 PSI pump, 20 PSI air, .011-.013 in tip; airless fine finish .007-.011 in tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness\u003c\/th\u003e\n\u003ctd\u003e3-5 wet mils per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAverage coverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft per gallon (varies with mil thickness, applicator and technique)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time (70 F, 50% RH)\u003c\/th\u003e\n\u003ctd\u003eTouch 30 minutes; recoat 30 minutes to 2 hours, based on heat and airflow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCure\u003c\/th\u003e\n\u003ctd\u003e5 days at 70 F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e28% by volume, 29% by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L; complies with SCAQMD, CARB, Canada, OTC Phase I and II\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eWater or Enduro Extender (up to 15% for more open time, where local rules allow)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eHands with soap and water; equipment with GF Brush and Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e50-140 F, tightly sealed; keep from freezing; best used within one year of the can date\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB788-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePrep: surfaces must be clean of contaminants and dust. Sand raw wood no finer than 220 grit. Clean pre-finished or sealed surfaces with a 50\/50 mix of denatured alcohol and water on a maroon non-woven pad. Fiberglass and pre-primed steel need proper prep and priming; always test first.\u003c\/li\u003e\n\u003cli\u003eMix the finish thoroughly to reincorporate solids. Slowly add 10% Enduro NCO Catalyst by volume while mixing for 2-3 minutes with a power drill.\u003c\/li\u003e\n\u003cli\u003eLet the mix rest 15 minutes, then strain through a fine-mesh filter. Mix only what you can spray in about 4 hours.\u003c\/li\u003e\n\u003cli\u003eSpray 3-5 wet mils per coat. It can be used without a sealer; GF suggests 1-2 coats of Enduro Sanding Sealer for more build, and 3-4 total coats of finish.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine 220-320 grit foam pad or a gray non-woven pad.\u003c\/li\u003e\n\u003cli\u003eIdeal conditions are 70 F, 50% humidity and out of direct sunlight. Allow 5 days to cure before heavy use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/products\/general-finishes-enduro-white-undercoat-sanding-sealer-gallon\"\u003eEnduro White Undercoat\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-extender-clear-pint\"\u003eEnduro Extender\u003c\/a\u003e, more \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats and clear finishes\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I brush or roll 2K Clear Poly?\u003c\/strong\u003e No. General Finishes lists it as spray only, with HVLP, air-assist airless or airless equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can I use it once it is catalyzed?\u003c\/strong\u003e General Finishes lists a pot life of about 4 hours once mixed, varying with colorant dosage, so mix only what you can spray in that time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be tinted?\u003c\/strong\u003e Yes. GF recommends Colourfal zero-VOC colorants; other colorant systems should be zero VOC and tested thoroughly.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53904601219382,"sku":"197-401","price":154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121632_1_0124.jpg?v=1776394853"},{"product_id":"general-finishes-enduro-white-undercoat-sanding-sealer-gallon","title":"General Finishes Enduro Water-Based White Undercoat, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro Water-Based White Undercoat, Gallon\u003c\/strong\u003e is a high-build, water-based acrylic primer for white and off-white wood finishes. General Finishes describes it as its Sanding Sealer with white colorant added: the heavy-bodied, high-solids formula builds film fast and sands easily, and it is particularly effective on MDF. It acts as a physical barrier, not a chemical one. For woods that bleed tannins, GF recommends its Stain Blocker primer, and for darker tints its Enduro Deep Base Undercoat. Specs are from the current General Finishes product page, with prep and system notes from the GF White Undercoat technical data sheet (2020-03).\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based acrylic primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite; tintable to white and light colors only (GF recommends zero-VOC colorants)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterior\/exterior\u003c\/th\u003e\n\u003ctd\u003eInterior\/exterior (GF product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1-2, depending on substrate and application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eSpray recommended (HVLP 1.5-1.8 mm). Synthetic or foam brush, or short nap or foam roller, for face frames when needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet film\u003c\/th\u003e\n\u003ctd\u003e3-5 mils per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft per gallon (GF product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry to touch\u003c\/th\u003e\n\u003ctd\u003e30+ minutes at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1+ hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight solids\u003c\/th\u003e\n\u003ctd\u003e53%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eThick (1000-2000 cPs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eDistilled water, 5% up to 10% by volume; GF Extender 10-15% for more open time where allowed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 90 g\/L (GF product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water for hands; GF Brush \u0026amp; Gun Cleaner for equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eGW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand with 120 grit, then 150 or 220 grit (no finer than 220). Remove dust with a water-dampened rag or oil-free tack cloth and let it dry.\u003c\/li\u003e\n\u003cli\u003eExisting finishes: scuff clean with a maroon synthetic pad and a 50:50 mix of denatured alcohol and water, dry 1-2 hours, then sand lightly with a 220-320 grit foam sanding sponge. Test adhesion first.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use to mix in settled solids.\u003c\/li\u003e\n\u003cli\u003eStrain through a medium-mesh filter and spray 3-5 wet mils. One solid coat sanded lightly is often enough; if you sand through a light coat, add another.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine (220-320) foam sanding pad or gray non-woven pad.\u003c\/li\u003e\n\u003cli\u003eTopcoat with GF White Poly or a light-colored pigmented topcoat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal conditions are 70°F and 50% humidity, out of direct sunlight. GF suggests its Accelerator in cool or humid conditions and its Extender in warm or dry conditions.\u003c\/li\u003e\n\u003cli\u003eDo not use steel wool with water-based finishes; trapped particles can rust.\u003c\/li\u003e\n\u003cli\u003eStore between 50°F and 80°F, tightly sealed. Best used within one year of the date on the can. Do not pour leftovers down the drain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor tannin-rich woods GF recommends its Stain Blocker primer instead. System picks: \u003ca href=\"\/products\/general-finishes-enduro-water-based-white-poly-satin-gallon\"\u003eGF Enduro White Poly, Satin, Gallon\u003c\/a\u003e as the topcoat, and \u003ca href=\"\/products\/general-finishes-enduro-extender-clear-pint\"\u003eGF Enduro Extender\u003c\/a\u003e for open time. See all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e products.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Enduro White Undercoat for?\u003c\/strong\u003e It is a high-build, water-based acrylic primer under white and light-colored finishes. General Finishes describes it as its Sanding Sealer with white colorant added, and notes it is particularly effective on MDF.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it block tannin bleed or knots?\u003c\/strong\u003e No. GF says it is a physical barrier, not a chemical one. For woods that bleed tannins, GF recommends its Stain Blocker primer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e 1-2 coats, sprayed 3-5 mils wet (HVLP 1.5-1.8 mm). At 70°F and 50% humidity it is dry to the touch in 30+ minutes and ready to recoat in 1+ hour. A topcoat is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far does a gallon go?\u003c\/strong\u003e General Finishes lists coverage of 450 sq ft per gallon. Substrate, sanding and film thickness change that.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53905272013110,"sku":"196-723","price":93.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016105014_1_0124.jpg?v=1776394873"},{"product_id":"general-finishes-enduro-clear-polyurethane-satin-gallon","title":"General Finishes Enduro Clear Polyurethane, Satin, Gallon","description":"\u003cp\u003eGeneral Finishes Enduro Clear Polyurethane, Satin, gallon (GF item GPS, B037-L).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro Clear Poly, Satin, 1 gallon\u003c\/strong\u003e is a water-based acrylic\/urethane blend from GF's professional Enduro line, for interior cabinets, trim, doors and furniture. GF recommends it over raw wood, stain and non-white painted surfaces; for white surfaces GF points to Enduro White Poly or GF Brushable White Enamel. Satin measures 30 on GF's sheen scale. It can be used without a sealer, and GF recommends 3 to 4 total coats.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes technical data sheet, Feb. 2023)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based acrylic\/urethane blend, interior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003e1 gallon, Satin (30)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse on\u003c\/th\u003e\n\u003ctd\u003eInterior cabinets, trim, doors and furniture; over raw wood, stain and non-white painted surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOther sheens\u003c\/th\u003e\n\u003ctd\u003eDead Flat (under 5), Flat (10), Semi-Gloss (55), Gloss (85+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTintable\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVolume solids\u003c\/th\u003e\n\u003ctd\u003e33% (Flat) to 26% (Gloss)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight solids\u003c\/th\u003e\n\u003ctd\u003e33% to 28%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eKoenig 72, Sward 12.0, Pencil F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet film\u003c\/th\u003e\n\u003ctd\u003e3-5 mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eMedium (350-450 cPs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eRoller (foam or short nap as necessary), HVLP 1.1-1.3 mm, air-assist airless (600 PSI pump, 20 PSI assist air, .011\" tip) or airless (fine finish .007\"-.011\" tip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry to touch\u003c\/th\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThin with\u003c\/th\u003e\n\u003ctd\u003eWater, GF Extender or GF Accelerator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eHands with soap and water; equipment with GF Brush \u0026amp; Gun Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 233 g\/L (TDS); under 250 g\/L (Satin SDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sun; best used within 1 year of the date on the can. Keep from freezing (SDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eGPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to apply (GF technical data sheet)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the surface is clean of contaminants and dust. Sanding too smooth can reduce adhesion.\u003c\/li\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit. Let any freshly stained or painted surface dry thoroughly and completely.\u003c\/li\u003e\n\u003cli\u003ePre-finished wood: clean with a 50\/50 mix of denatured alcohol and water and a maroon non-woven pad, then sand with a fine (220-320) foam sanding pad or maroon pad. On other substrates, always test first.\u003c\/li\u003e\n\u003cli\u003eNo sealer is required. For more build, GF suggests 1-2 coats of GF Sanding Sealer first.\u003c\/li\u003e\n\u003cli\u003eApply 3-4 total coats, recoating after 2 hours. Sand between coats with a fine (220-320) foam sanding pad or gray non-woven pad.\u003c\/li\u003e\n\u003cli\u003eForce dry (optional): let it flash 10 minutes at room temperature, heat the surface to 105°F with infrared lamps or an oven, and let it cool before sanding. Allow at least 30 minutes between coats.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSafety (GF SDS, Enduro Clear Poly Satin, revision 3, April 12, 2024)\u003c\/h3\u003e\n\u003cp\u003eSignal word: Warning. Skin sensitizer, category 1: may cause an allergic skin reaction. Wear protective gloves and safety glasses with side shields, avoid breathing mist or spray, and wash skin with soap and water after contact. California Proposition 65: the SDS lists 1,4-dioxane and ethylene oxide (carcinogens; ethylene oxide is also a developmental and reproductive toxicant). The SDS lists it as not regulated for DOT ground shipping. Do not pour leftovers down the drain; dispose of it according to local laws.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/general-finishes-enduro-poly-clear-dead-flat-gallon\"\u003eDead Flat\u003c\/a\u003e; add \u003ca href=\"\/products\/general-finishes-enduro-extender-clear-pint\"\u003eGF Enduro Extender\u003c\/a\u003e for roller work. More clear finishes: \u003ca href=\"\/collections\/polyurethane\"\u003epolyurethane for wood\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003eprotective finishes and topcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I brush or roll Enduro Clear Poly?\u003c\/strong\u003e General Finishes engineers Enduro Clear Poly for spraying (HVLP 1.1-1.3 mm, air-assisted airless or airless). Face frames, edges and drawer fronts can be rolled with a short-nap or foam roller; GF suggests adding 10-20% GF Extender to help it level. For an all-brush project, GF High Performance Topcoat is the brushable choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a sealer?\u003c\/strong\u003e No. It can go straight onto raw wood. For faster build, GF suggests 1-2 coats of GF Sanding Sealer first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e GF recommends 3-4 total coats, 3-5 mils wet each. At 70°F and 50% humidity the TDS lists dry to touch in 30 minutes and recoat in 2 hours (the product page says 1-2 hours); full cure takes 21 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it over white or light paint?\u003c\/strong\u003e No. GF warns that any clear coat, including this one, can yellow over white or light paints. Use Enduro White Poly or GF Brushable White Enamel for white finishes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2023-02\/TDS-2023-02-Enduro-Clear-Poly-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF Enduro Clear Poly TDS (Feb. 2023)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2024-04\/SDS-ENGLISH-Enduro-Clear-Poly-SATIN-Water-Base-General-Finishes-US-HCS-2012-v3-2024-04-12.PDF\" target=\"_blank\" rel=\"noopener\"\u003eGF Enduro Clear Poly Satin SDS (rev. 3, Apr. 12, 2024)\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":53905272275254,"sku":"196-696","price":116.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016105076_1_0124.jpg?v=1776394863"},{"product_id":"general-finishes-enduro-rtm-water-based-stain-bordeaux-quart","title":"General Finishes Enduro RTM Water-Based Stain, Bordeaux, Quart","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro RTM Water-Based Stain, Bordeaux, Quart\u003c\/strong\u003e (GF QBD) is one of the stock colors in General Finishes' Enduro Ready to Match (RTM) system, a professional water-based wood stain made from a mix of dyes and pigments to look like an oil-based stain. Use it as is, or intermix RTM colors and the RTM Clear Base to build your own shade with GF's formula book and chip box. It is for interior raw wood such as cabinets, trim, doors and furniture, brushes, rolls, pads or sprays on, and always gets a clear topcoat.\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes RTM product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and color\u003c\/th\u003e\n\u003ctd\u003eQuart, Bordeaux (GF QBD, UPC 606016109548)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based dye and pigment stain (Enduro stain concentrate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only, on raw wood. Not for use over existing finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e110-125 sq ft per quart (product page); the 2020 TDS says up to 600 sq ft per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1 coat; an optional second coat deepens the color. No more than 2 coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTack-free 15-30 minutes, recoat 30-45 minutes, topcoat 1-2 hours at 70°F and 50% humidity (product page directions). The 2020 TDS lists 30 minutes to touch and 2 hours to recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eRequired: 3 coats of a GF topcoat. Wait at least 24 hours before an oil-based topcoat such as Arm-R-Seal or Gel Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle brush, foam brush, pad, staining pad or microfiber roller, or spray (HVLP 0.9-1.1 mm tip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and add up to 10% by volume. Up to 5% GF Extender adds open time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eunder 60 g\/L for Bordeaux (product page); SDS: under 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight solids\u003c\/th\u003e\n\u003ctd\u003e15% (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eHands with soap and water; equipment with GF Brush \u0026amp; Gun Cleaner (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sun, tightly sealed; best used within 1 year of the date on the can (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eQBD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (oak, ash, mahogany) with 120, then 150, then 180 grit. Sand closed-grain wood (cherry, pine, maple, birch, alder) with 150, then 220 grit. Remove any existing finish first. Don't use steel wool with water-based finishes.\u003c\/li\u003e\n\u003cli\u003eRemove the dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag. To cut grain raise, dampen the wood, let it dry and sand lightly with a 220-320 pad.\u003c\/li\u003e\n\u003cli\u003eStir the stain before and during use, and test your full finishing schedule (stain plus topcoat) on a scrap of the same wood.\u003c\/li\u003e\n\u003cli\u003eWork one section at a time. Apply a liberal amount, then wipe the excess off evenly with the grain using a quality paper or shop towel (not a cotton t-shirt). Keep a wet edge to avoid lap marks.\u003c\/li\u003e\n\u003cli\u003eFor blotch-prone woods such as pine, GF says an initial coat of \u003ca href=\"\/products\/general-finishes-pre-stain-conditioner-natural-quart\"\u003eGF Pre-Stain Conditioner\u003c\/a\u003e can even out the color (you may need a darker stain).\u003c\/li\u003e\n\u003cli\u003eLet it dry, add a second coat only if you want more depth, then seal with 3 coats of GF topcoat. After the first topcoat coat, sand grain raise lightly with a 220 pad without cutting through to the stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes SDS UL-GEF-020 (revised 13-Dec-2024) lists RTM Bordeaux as not classified under the OSHA Hazard Communication Standard, with no signal word. The SDS lists California Prop 65 chemicals (carbon black and quartz). Keep out of reach of children and wash up after use.\u003c\/p\u003e\n\u003cp\u003eOther RTM colors we carry: \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-raw-sienna-quart\"\u003eRaw Sienna\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-tint-white-quart\"\u003eTint White\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-strong-black-quart\"\u003eStrong Black\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGF High Performance Topcoat\u003c\/a\u003e, or browse all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e products.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-wood-stains-dye-stains\/enduro-ready-to-match-rtm-water-based\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro RTM product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2020-04\/TDS-2020-03-Enduro-RTM-Wood-Stain-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEnduro RTM TDS (published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2025-02\/SDS-ENGLISH-Enduro-RTM-Stain-BORDEAUX-Water-Base-General-Finishes-US-HCS-2012-v1-2024-12-13.PDF\" target=\"_blank\" rel=\"noopener\"\u003eRTM Bordeaux SDS UL-GEF-020, rev 13-Dec-2024\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256067382,"sku":"196-653","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016109548_1_0124.jpg?v=1791582139"},{"product_id":"general-finishes-enduro-rtm-water-based-stain-tint-white-quart","title":"General Finishes Enduro RTM Water-Based Stain, Tint White, Quart","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro RTM Water-Based Stain, Tint White, Quart\u003c\/strong\u003e (GF QTW) is one of the stock colors in General Finishes' Enduro Ready to Match (RTM) system, a professional water-based wood stain made from a mix of dyes and pigments to look like an oil-based stain. Use it as is, or intermix RTM colors and the RTM Clear Base to build your own shade with GF's formula book and chip box. Tint White is one of the ready-to-use RTM stain colors, not an empty tint base: use it on its own or intermix it with other RTM colors. It is for interior raw wood such as cabinets, trim, doors and furniture, brushes, rolls, pads or sprays on, and always gets a clear topcoat.\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes RTM product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and color\u003c\/th\u003e\n\u003ctd\u003eQuart, Tint White (GF QTW, UPC 606016109586)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based dye and pigment stain (Enduro stain concentrate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only, on raw wood. Not for use over existing finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e110-125 sq ft per quart (product page); the 2020 TDS says up to 600 sq ft per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1 coat; an optional second coat deepens the color. No more than 2 coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTack-free 15-30 minutes, recoat 30-45 minutes, topcoat 1-2 hours at 70°F and 50% humidity (product page directions). The 2020 TDS lists 30 minutes to touch and 2 hours to recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eRequired: 3 coats of a GF topcoat. Wait at least 24 hours before an oil-based topcoat such as Arm-R-Seal or Gel Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle brush, foam brush, pad, staining pad or microfiber roller, or spray (HVLP 0.9-1.1 mm tip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and add up to 10% by volume. Up to 5% GF Extender adds open time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eunder 95 g\/L for Tint White (product page); SDS: under 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight solids\u003c\/th\u003e\n\u003ctd\u003e15% (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eHands with soap and water; equipment with GF Brush \u0026amp; Gun Cleaner (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sun, tightly sealed; best used within 1 year of the date on the can (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eQTW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (oak, ash, mahogany) with 120, then 150, then 180 grit. Sand closed-grain wood (cherry, pine, maple, birch, alder) with 150, then 220 grit. Remove any existing finish first. Don't use steel wool with water-based finishes.\u003c\/li\u003e\n\u003cli\u003eRemove the dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag. To cut grain raise, dampen the wood, let it dry and sand lightly with a 220-320 pad.\u003c\/li\u003e\n\u003cli\u003eStir the stain before and during use, and test your full finishing schedule (stain plus topcoat) on a scrap of the same wood.\u003c\/li\u003e\n\u003cli\u003eWork one section at a time. Apply a liberal amount, then wipe the excess off evenly with the grain using a quality paper or shop towel (not a cotton t-shirt). Keep a wet edge to avoid lap marks.\u003c\/li\u003e\n\u003cli\u003eFor blotch-prone woods such as pine, GF says an initial coat of \u003ca href=\"\/products\/general-finishes-pre-stain-conditioner-natural-quart\"\u003eGF Pre-Stain Conditioner\u003c\/a\u003e can even out the color (you may need a darker stain).\u003c\/li\u003e\n\u003cli\u003eLet it dry, add a second coat only if you want more depth, then seal with 3 coats of GF topcoat. After the first topcoat coat, sand grain raise lightly with a 220 pad without cutting through to the stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes SDS UL-GEF-029 (revised 13-Dec-2024) for RTM Tint White carries the signal word Warning: may cause an allergic skin reaction (skin sensitizer, Category 1). Wear protective gloves, avoid breathing spray mist, and wash skin with soap and water if it gets on you. The SDS also lists California Prop 65 chemicals (titanium dioxide and methyl isobutyl ketone).\u003c\/p\u003e\n\u003cp\u003eOther RTM colors we carry: \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-bordeaux-quart\"\u003eBordeaux\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-raw-sienna-quart\"\u003eRaw Sienna\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-strong-black-quart\"\u003eStrong Black\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGF High Performance Topcoat\u003c\/a\u003e, or browse all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e products.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-wood-stains-dye-stains\/enduro-ready-to-match-rtm-water-based\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro RTM product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2020-04\/TDS-2020-03-Enduro-RTM-Wood-Stain-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEnduro RTM TDS (published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2025-02\/SDS-ENGLISH-Enduro-RTM-Stain-TINT-WHITE-Water-Base-General-Finishes-US-HCS-2012-v1-2024-12-13.PDF\" target=\"_blank\" rel=\"noopener\"\u003eRTM Tint White SDS UL-GEF-029, rev 13-Dec-2024\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256132918,"sku":"196-665","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016109586_1_0124.jpg?v=1791582141"},{"product_id":"general-finishes-enduro-rtm-water-based-stain-raw-sienna-quart","title":"General Finishes Enduro RTM Water-Based Stain, Raw Sienna, Quart","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro RTM Water-Based Stain, Raw Sienna, Quart\u003c\/strong\u003e (GF QRS) is one of the stock colors in General Finishes' Enduro Ready to Match (RTM) system, a professional water-based wood stain made from a mix of dyes and pigments to look like an oil-based stain. Use it as is, or intermix RTM colors and the RTM Clear Base to build your own shade with GF's formula book and chip box. It is for interior raw wood such as cabinets, trim, doors and furniture, brushes, rolls, pads or sprays on, and always gets a clear topcoat.\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes RTM product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and color\u003c\/th\u003e\n\u003ctd\u003eQuart, Raw Sienna (GF QRS, UPC 606016109593)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based dye and pigment stain (Enduro stain concentrate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only, on raw wood. Not for use over existing finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e110-125 sq ft per quart (product page); the 2020 TDS says up to 600 sq ft per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1 coat; an optional second coat deepens the color. No more than 2 coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTack-free 15-30 minutes, recoat 30-45 minutes, topcoat 1-2 hours at 70°F and 50% humidity (product page directions). The 2020 TDS lists 30 minutes to touch and 2 hours to recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eRequired: 3 coats of a GF topcoat. Wait at least 24 hours before an oil-based topcoat such as Arm-R-Seal or Gel Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle brush, foam brush, pad, staining pad or microfiber roller, or spray (HVLP 0.9-1.1 mm tip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and add up to 10% by volume. Up to 5% GF Extender adds open time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eunder 150 g\/L for Raw Sienna (product page); SDS: under 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight solids\u003c\/th\u003e\n\u003ctd\u003e15% (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eHands with soap and water; equipment with GF Brush \u0026amp; Gun Cleaner (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sun, tightly sealed; best used within 1 year of the date on the can (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eQRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (oak, ash, mahogany) with 120, then 150, then 180 grit. Sand closed-grain wood (cherry, pine, maple, birch, alder) with 150, then 220 grit. Remove any existing finish first. Don't use steel wool with water-based finishes.\u003c\/li\u003e\n\u003cli\u003eRemove the dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag. To cut grain raise, dampen the wood, let it dry and sand lightly with a 220-320 pad.\u003c\/li\u003e\n\u003cli\u003eStir the stain before and during use, and test your full finishing schedule (stain plus topcoat) on a scrap of the same wood.\u003c\/li\u003e\n\u003cli\u003eWork one section at a time. Apply a liberal amount, then wipe the excess off evenly with the grain using a quality paper or shop towel (not a cotton t-shirt). Keep a wet edge to avoid lap marks.\u003c\/li\u003e\n\u003cli\u003eFor blotch-prone woods such as pine, GF says an initial coat of \u003ca href=\"\/products\/general-finishes-pre-stain-conditioner-natural-quart\"\u003eGF Pre-Stain Conditioner\u003c\/a\u003e can even out the color (you may need a darker stain).\u003c\/li\u003e\n\u003cli\u003eLet it dry, add a second coat only if you want more depth, then seal with 3 coats of GF topcoat. After the first topcoat coat, sand grain raise lightly with a 220 pad without cutting through to the stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes SDS UL-GEF-023 (revised 13-Dec-2024) lists RTM Raw Sienna as not classified under the OSHA Hazard Communication Standard, with no signal word. The SDS lists California Prop 65 chemicals (quartz). Keep out of reach of children and wash up after use.\u003c\/p\u003e\n\u003cp\u003eOther RTM colors we carry: \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-bordeaux-quart\"\u003eBordeaux\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-tint-white-quart\"\u003eTint White\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-strong-black-quart\"\u003eStrong Black\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGF High Performance Topcoat\u003c\/a\u003e, or browse all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e products.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-wood-stains-dye-stains\/enduro-ready-to-match-rtm-water-based\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro RTM product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2020-04\/TDS-2020-03-Enduro-RTM-Wood-Stain-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEnduro RTM TDS (published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2025-02\/SDS-ENGLISH-Enduro-RTM-Stain-RAW-SIENNA-Water-Base-General-Finishes-US-HCS-2012-v1-2024-12-13.PDF\" target=\"_blank\" rel=\"noopener\"\u003eRTM Raw Sienna SDS UL-GEF-023, rev 13-Dec-2024\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256165686,"sku":"196-668","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016109593_1_0124.jpg?v=1791582144"},{"product_id":"general-finishes-enduro-pre-cat-lacquer-clear-flat-gallon","title":"General Finishes Enduro Pre-Cat Lacquer, Clear, Flat, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro Pre-Cat Lacquer, Clear, Flat, Gallon\u003c\/strong\u003e (GF GPCF) is a professional water-based, self-crosslinking acrylic topcoat for interior cabinets, trim, doors and furniture. General Finishes built it for shops that need fast dry times and the ability to pack or stack finished pieces after 12 hours, at a lower price than Enduro Clear Poly. It is water-white in the can, dries clear, and has good water, chemical and yellowing resistance. It is made to be sprayed, is self-sealing, and goes over raw wood, stain and non-white painted surfaces.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Pre-Cat Lacquer product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eGallon, Flat, gloss units 10 or less (TDS: 10) (GF GPCF, UPC 606016120390)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based self-crosslinking acrylic; water-white, dries clear, no ambering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only: cabinets, trim, doors and furniture over raw wood, stain or non-white paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft per gallon (product page); the TDS says up to 600 sq ft per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eMinimum of 3 coats (product page); the TDS recommends 3-4 total coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTouch 10+ minutes and recoat 1+ hour in the specifications and TDS (the page's application steps say 30+ minutes to touch); light use 7-10 days; full cure 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStacking\u003c\/th\u003e\n\u003ctd\u003eCan be packed or stacked after 12 hours of drying (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray, 3-5 mils wet per coat. HVLP 1.1-1.3 mm; compressed air .040; airless .009-.013 (TDS: fine finish .007-.011)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eReady to spray. Thin with distilled water if wanted, starting at 5% and up to 10%; GF Extender 10-15% for more open time where allowed (more than 2% is not SCAQMD compliant in California)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e26% by weight, 24% by volume (product page); the TDS lists 25% by weight, 23% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water for hands; GF Brush \u0026amp; Gun Cleaner for equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L (Flat, product page and SDS revised 14-Dec-2022); the TDS lists under 271 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F (TDS); best used within 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove the dust. A freshly stained surface must be completely dry; do not sand it. Existing finishes: scuff clean with a non-woven pad and a 50:50 mix of denatured alcohol and water, dry 1-2 hours, sand lightly with a 220-320 sanding sponge, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area. Stir thoroughly before and during use; do not shake. Strain through a fine-mesh filter before spraying.\u003c\/li\u003e\n\u003cli\u003eSpray wet coats 3-5 mils thick with the gun 6-8 inches from the surface, overlapping each pass 25%. For more build over raw wood, GF suggests 1-2 coats of Enduro Sanding Sealer, then 2 coats of Pre-Cat Lacquer.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine (220-320) foam sanding pad or 400 grit paper and remove the dust. Apply at least 3 coats.\u003c\/li\u003e\n\u003cli\u003eTreat gently until cured, 21 days. Cabinet face frames and edges can be done with a pad or a small cabinet roller, but large areas may not level by hand; GF suggests the same sheen of High Performance Topcoat where brushing is needed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use it, or any clear coat, over white or light paints such as GF Milk Paint or White Poly; it may cause yellowing. GF's white paints don't need a topcoat.\u003c\/li\u003e\n\u003cli\u003eDo not use water-based products with linseed or Danish oils. Let oil-based products dry 72+ hours before a water-based coat.\u003c\/li\u003e\n\u003cli\u003eTintable but not recommended; GF suggests Enduro Clear Poly or High Performance for tinting. For toning, add up to 10% GF Dye Stain, Water Based Wood Stain or RTM Stain.\u003c\/li\u003e\n\u003cli\u003eDurability is rated Medium by GF. For higher durability, GF points to Enduro Clear Poly.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes SDS UL-GEF-061 for Enduro Pre-Cat Lacquer Flat (revised 14-Dec-2022) lists it as not classified under the OSHA Hazard Communication Standard, with no signal word, and says it contains no Prop 65 chemicals. The product page's label text still carries a California Prop 65 warning. Wear a mask when spraying, work with good ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/general-finishes-enduro-pre-cat-lacquer-clear-satin-gallon\"\u003eSatin\u003c\/a\u003e and \u003ca href=\"\/products\/general-finishes-enduro-pre-cat-lacquer-clear-semi-gloss-gallon\"\u003eSemi-Gloss\u003c\/a\u003e. Need more durability? See \u003ca href=\"\/products\/general-finishes-enduro-conversion-varnish-clear-satin-gallon\"\u003eEnduro Conversion Varnish\u003c\/a\u003e or \u003ca href=\"\/products\/general-finishes-enduro-poly-clear-dead-flat-gallon\"\u003eEnduro Clear Poly\u003c\/a\u003e. For brushed areas see \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGF High Performance Topcoat\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs Enduro Pre-Cat Lacquer a solvent lacquer?\u003c\/strong\u003e No. It is a water-based, self-crosslinking acrylic. It is water-white in the can, dries clear without ambering, and hands clean up with soap and water (GF Brush \u0026amp; Gun Cleaner for equipment).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow soon can finished pieces be stacked?\u003c\/strong\u003e The GF TDS says pieces can be packed or stacked after 12 hours of drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e GF calls for a minimum of 3 coats, sprayed 3-5 mils wet. The current GF product page lists dry to touch in 30+ minutes and recoat in 1+ hour at 70°F and 50% humidity; full cure takes 21 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-Cat Lacquer or Enduro Clear Poly?\u003c\/strong\u003e GF rates Pre-Cat Lacquer's durability Medium and built it as a hard topcoat at a good price point. If you need higher durability, GF points to Enduro Clear Poly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-pre-cat-lacquer\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro Pre-Cat Lacquer product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-06\/TDS-2022-06-Enduro-Pre-Cat-Lacquer-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Pre-Cat Lacquer (2022-06 file, published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2024-04\/SDS-ENGLISH-Enduro-Pre-Cat-Lacquer-FLAT-Water-Base-General-Finishes-US-HCS-2012-v1-2022-12-14.PDF\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS UL-GEF-061 Pre-Cat Lacquer Flat, rev 14-Dec-2022\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256198454,"sku":"196-686","price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016120390_1_0124.jpg?v=1791582150"},{"product_id":"general-finishes-enduro-pre-cat-lacquer-clear-satin-gallon","title":"General Finishes Enduro Pre-Cat Lacquer, Clear, Satin, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro Pre-Cat Lacquer, Clear, Satin, Gallon\u003c\/strong\u003e (GF GPCS) is a professional water-based, self-crosslinking acrylic topcoat for interior cabinets, trim, doors and furniture. General Finishes built it for shops that need fast dry times and the ability to pack or stack finished pieces after 12 hours, at a lower price than Enduro Clear Poly. It is water-white in the can, dries clear, and has good water, chemical and yellowing resistance. It is made to be sprayed, is self-sealing, and goes over raw wood, stain and non-white painted surfaces.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Pre-Cat Lacquer product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eGallon, Satin, gloss units 25-35 (TDS: 30) (GF GPCS, UPC 606016120406)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based self-crosslinking acrylic; water-white, dries clear, no ambering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only: cabinets, trim, doors and furniture over raw wood, stain or non-white paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft per gallon (product page); the TDS says up to 600 sq ft per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eMinimum of 3 coats (product page); the TDS recommends 3-4 total coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTouch 10+ minutes and recoat 1+ hour in the specifications and TDS (the page's application steps say 30+ minutes to touch); light use 7-10 days; full cure 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStacking\u003c\/th\u003e\n\u003ctd\u003eCan be packed or stacked after 12 hours of drying (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray, 3-5 mils wet per coat. HVLP 1.1-1.3 mm; compressed air .040; airless .009-.013 (TDS: fine finish .007-.011)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eReady to spray. Thin with distilled water if wanted, starting at 5% and up to 10%; GF Extender 10-15% for more open time where allowed (more than 2% is not SCAQMD compliant in California)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e24% by weight, 23% by volume (product page); the TDS lists 25% by weight, 23% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water for hands; GF Brush \u0026amp; Gun Cleaner for equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L (Satin, product page and SDS revised 14-Dec-2022); the TDS lists under 271 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F (TDS); best used within 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove the dust. A freshly stained surface must be completely dry; do not sand it. Existing finishes: scuff clean with a non-woven pad and a 50:50 mix of denatured alcohol and water, dry 1-2 hours, sand lightly with a 220-320 sanding sponge, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area. Stir thoroughly before and during use; do not shake. Strain through a fine-mesh filter before spraying.\u003c\/li\u003e\n\u003cli\u003eSpray wet coats 3-5 mils thick with the gun 6-8 inches from the surface, overlapping each pass 25%. For more build over raw wood, GF suggests 1-2 coats of Enduro Sanding Sealer, then 2 coats of Pre-Cat Lacquer.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine (220-320) foam sanding pad or 400 grit paper and remove the dust. Apply at least 3 coats.\u003c\/li\u003e\n\u003cli\u003eTreat gently until cured, 21 days. Cabinet face frames and edges can be done with a pad or a small cabinet roller, but large areas may not level by hand; GF suggests the same sheen of High Performance Topcoat where brushing is needed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use it, or any clear coat, over white or light paints such as GF Milk Paint or White Poly; it may cause yellowing. GF's white paints don't need a topcoat.\u003c\/li\u003e\n\u003cli\u003eDo not use water-based products with linseed or Danish oils. Let oil-based products dry 72+ hours before a water-based coat.\u003c\/li\u003e\n\u003cli\u003eTintable but not recommended; GF suggests Enduro Clear Poly or High Performance for tinting. For toning, add up to 10% GF Dye Stain, Water Based Wood Stain or RTM Stain.\u003c\/li\u003e\n\u003cli\u003eDurability is rated Medium by GF. For higher durability, GF points to Enduro Clear Poly.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes SDS UL-GEF-063 for Enduro Pre-Cat Lacquer Satin (revised 14-Dec-2022) lists it as not classified under the OSHA Hazard Communication Standard, with no signal word, and says it contains no Prop 65 chemicals. The product page's label text still carries a California Prop 65 warning. Wear a mask when spraying, work with good ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/general-finishes-enduro-pre-cat-lacquer-clear-flat-gallon\"\u003eFlat\u003c\/a\u003e and \u003ca href=\"\/products\/general-finishes-enduro-pre-cat-lacquer-clear-semi-gloss-gallon\"\u003eSemi-Gloss\u003c\/a\u003e. Need more durability? See \u003ca href=\"\/products\/general-finishes-enduro-conversion-varnish-clear-satin-gallon\"\u003eEnduro Conversion Varnish\u003c\/a\u003e or \u003ca href=\"\/products\/general-finishes-enduro-poly-clear-dead-flat-gallon\"\u003eEnduro Clear Poly\u003c\/a\u003e. For brushed areas see \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGF High Performance Topcoat\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs Enduro Pre-Cat Lacquer a solvent lacquer?\u003c\/strong\u003e No. It is a water-based, self-crosslinking acrylic. It is water-white in the can, dries clear without ambering, and hands clean up with soap and water (GF Brush \u0026amp; Gun Cleaner for equipment).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow soon can finished pieces be stacked?\u003c\/strong\u003e The GF TDS says pieces can be packed or stacked after 12 hours of drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e GF calls for a minimum of 3 coats, sprayed 3-5 mils wet. The current GF product page lists dry to touch in 30+ minutes and recoat in 1+ hour at 70°F and 50% humidity; full cure takes 21 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-Cat Lacquer or Enduro Clear Poly?\u003c\/strong\u003e GF rates Pre-Cat Lacquer's durability Medium and built it as a hard topcoat at a good price point. If you need higher durability, GF points to Enduro Clear Poly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-pre-cat-lacquer\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro Pre-Cat Lacquer product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-06\/TDS-2022-06-Enduro-Pre-Cat-Lacquer-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Pre-Cat Lacquer (2022-06 file, published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2024-04\/SDS-ENGLISH-Enduro-Pre-Cat-Lacquer-SATIN-Water-Base-General-Finishes-US-HCS-2012-v1-2022-12-14.PDF\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS UL-GEF-063 Pre-Cat Lacquer Satin, rev 14-Dec-2022\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256263990,"sku":"196-688","price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016120406_1_0124.jpg?v=1791582152"},{"product_id":"general-finishes-enduro-pre-cat-lacquer-clear-semi-gloss-gallon","title":"General Finishes Enduro Pre-Cat Lacquer, Clear, Semi-Gloss, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro Pre-Cat Lacquer, Clear, Semi-Gloss, Gallon\u003c\/strong\u003e (GF GPCSG) is a professional water-based, self-crosslinking acrylic topcoat for interior cabinets, trim, doors and furniture. General Finishes built it for shops that need fast dry times and the ability to pack or stack finished pieces after 12 hours, at a lower price than Enduro Clear Poly. It is water-white in the can, dries clear, and has good water, chemical and yellowing resistance. It is made to be sprayed, is self-sealing, and goes over raw wood, stain and non-white painted surfaces.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Pre-Cat Lacquer product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eGallon, Semi-Gloss, gloss units 50-60 (TDS: 55) (GF GPCSG, UPC 606016120413)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based self-crosslinking acrylic; water-white, dries clear, no ambering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only: cabinets, trim, doors and furniture over raw wood, stain or non-white paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft per gallon (product page); the TDS says up to 600 sq ft per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003eMinimum of 3 coats (product page); the TDS recommends 3-4 total coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTouch 10+ minutes and recoat 1+ hour in the specifications and TDS (the page's application steps say 30+ minutes to touch); light use 7-10 days; full cure 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStacking\u003c\/th\u003e\n\u003ctd\u003eCan be packed or stacked after 12 hours of drying (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray, 3-5 mils wet per coat. HVLP 1.1-1.3 mm; compressed air .040; airless .009-.013 (TDS: fine finish .007-.011)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eReady to spray. Thin with distilled water if wanted, starting at 5% and up to 10%; GF Extender 10-15% for more open time where allowed (more than 2% is not SCAQMD compliant in California)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003e24% by weight, 23% by volume (product page); the TDS lists 25% by weight, 23% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water for hands; GF Brush \u0026amp; Gun Cleaner for equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L (Semi-Gloss, product page and SDS revised 14-Dec-2022); the TDS lists under 271 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F (TDS); best used within 1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove the dust. A freshly stained surface must be completely dry; do not sand it. Existing finishes: scuff clean with a non-woven pad and a 50:50 mix of denatured alcohol and water, dry 1-2 hours, sand lightly with a 220-320 sanding sponge, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area. Stir thoroughly before and during use; do not shake. Strain through a fine-mesh filter before spraying.\u003c\/li\u003e\n\u003cli\u003eSpray wet coats 3-5 mils thick with the gun 6-8 inches from the surface, overlapping each pass 25%. For more build over raw wood, GF suggests 1-2 coats of Enduro Sanding Sealer, then 2 coats of Pre-Cat Lacquer.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine (220-320) foam sanding pad or 400 grit paper and remove the dust. Apply at least 3 coats.\u003c\/li\u003e\n\u003cli\u003eTreat gently until cured, 21 days. Cabinet face frames and edges can be done with a pad or a small cabinet roller, but large areas may not level by hand; GF suggests the same sheen of High Performance Topcoat where brushing is needed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use it, or any clear coat, over white or light paints such as GF Milk Paint or White Poly; it may cause yellowing. GF's white paints don't need a topcoat.\u003c\/li\u003e\n\u003cli\u003eDo not use water-based products with linseed or Danish oils. Let oil-based products dry 72+ hours before a water-based coat.\u003c\/li\u003e\n\u003cli\u003eTintable but not recommended; GF suggests Enduro Clear Poly or High Performance for tinting. For toning, add up to 10% GF Dye Stain, Water Based Wood Stain or RTM Stain.\u003c\/li\u003e\n\u003cli\u003eDurability is rated Medium by GF. For higher durability, GF points to Enduro Clear Poly.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes SDS UL-GEF-064 for Enduro Pre-Cat Lacquer Semi-Gloss (revised 14-Dec-2022) lists it as not classified under the OSHA Hazard Communication Standard, with no signal word, and says it contains no Prop 65 chemicals. The product page's label text still carries a California Prop 65 warning. Wear a mask when spraying, work with good ventilation and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/general-finishes-enduro-pre-cat-lacquer-clear-flat-gallon\"\u003eFlat\u003c\/a\u003e and \u003ca href=\"\/products\/general-finishes-enduro-pre-cat-lacquer-clear-satin-gallon\"\u003eSatin\u003c\/a\u003e. Need more durability? See \u003ca href=\"\/products\/general-finishes-enduro-conversion-varnish-clear-satin-gallon\"\u003eEnduro Conversion Varnish\u003c\/a\u003e or \u003ca href=\"\/products\/general-finishes-enduro-poly-clear-dead-flat-gallon\"\u003eEnduro Clear Poly\u003c\/a\u003e. For brushed areas see \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGF High Performance Topcoat\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs Enduro Pre-Cat Lacquer a solvent lacquer?\u003c\/strong\u003e No. It is a water-based, self-crosslinking acrylic. It is water-white in the can, dries clear without ambering, and hands clean up with soap and water (GF Brush \u0026amp; Gun Cleaner for equipment).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow soon can finished pieces be stacked?\u003c\/strong\u003e The GF TDS says pieces can be packed or stacked after 12 hours of drying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e GF calls for a minimum of 3 coats, sprayed 3-5 mils wet. The current GF product page lists dry to touch in 30+ minutes and recoat in 1+ hour at 70°F and 50% humidity; full cure takes 21 days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-Cat Lacquer or Enduro Clear Poly?\u003c\/strong\u003e GF rates Pre-Cat Lacquer's durability Medium and built it as a hard topcoat at a good price point. If you need higher durability, GF points to Enduro Clear Poly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-pre-cat-lacquer\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro Pre-Cat Lacquer product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2022-06\/TDS-2022-06-Enduro-Pre-Cat-Lacquer-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Pre-Cat Lacquer (2022-06 file, published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2024-04\/SDS-ENGLISH-Enduro-Pre-Cat-Lacquer-SEMI-GLOSS-Water-Base-General-Finishes-US-HCS-2012-v1-2022-12-14.PDF\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS UL-GEF-064 Pre-Cat Lacquer Semi-Gloss, rev 14-Dec-2022\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256329526,"sku":"196-690","price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016120413_1_0124.jpg?v=1791582154"},{"product_id":"general-finishes-enduro-conversion-varnish-clear-satin-gallon","title":"General Finishes Enduro Conversion Varnish, Clear, Satin, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro Conversion Varnish, Clear, Satin, Gallon\u003c\/strong\u003e (GF CVS) is the most durable water-based topcoat in General Finishes' line: a post-catalyzed, high-solids, two-component urethane\/acrylic blend for high-use commercial and residential work such as kitchen cabinets, bathroom vanities, bar tops, table tops, trim, doors and furniture. GF says it significantly out-performs solvent-based conversion varnishes. It must be mixed with General Finishes NCO Catalyst (a separate GF product) before use, is sprayed, is self-sealing, and is rated for interior or exterior projects.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Conversion Varnish product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eGallon, Satin, gloss units 25-35 (TDS: 30) (GF CVS, UPC 606016103614)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based 2K urethane\/acrylic blend; water-white, dries clear, no ambering; not tintable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior or exterior cabinets, trim, doors, furniture, table tops and bar tops, over raw wood, stain or non-white paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalyst\u003c\/th\u003e\n\u003ctd\u003eUp to 10% GF NCO Catalyst by volume: 3.2 oz per quart, 12.8 oz per gallon (TDS: 10 parts CV to 1 part catalyst)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eAbout 6 hours once mixed (TDS); the product page says leftover mixed product solidifies after 6-8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 coats; 4 in high-moisture areas. More coats won't improve durability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTouch 30+ minutes, recoat 1+ hour (product page; the TDS says 30 minutes and 2 hours), light use 72 hours, cure 7 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray, 3-5 mils wet per coat; HVLP 1.1-1.3 mm tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and up to 10% by volume (before or after adding catalyst); GF Extender 10-15% where allowed (more than 2% is not SCAQMD compliant in California)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eSatin 28% by weight, 26% by volume (product page); TDS 28% \/ 27%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eClean the spray gun right after use with GF Brush \u0026amp; Gun Cleaner; soap and water for hands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 210 g\/L (product page and SDS revised 28-Feb-2025); the TDS lists under 200 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F (TDS); best used within 1 year of the date on the can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eCVS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand no finer than 220 grit and remove the dust. A new stained surface must be fully dry; do not sand it. Existing finishes: scuff with a non-woven pad and 50:50 denatured alcohol and water, dry 1-2 hours, sand with a 220-320 sponge, remove dust and test adhesion.\u003c\/li\u003e\n\u003cli\u003eRead the protection instructions first. Stir thoroughly, ideally with a drill mixer; do not shake.\u003c\/li\u003e\n\u003cli\u003eSlowly stir in up to 10% NCO Catalyst by volume. Mix 2-3 minutes with a power drill or 5 minutes by hand, then let it sit 15 minutes. Mix only what you will use; it can only be mixed once.\u003c\/li\u003e\n\u003cli\u003eStrain and spray 3 coats (4 in high-moisture areas), 3-5 mils wet, with the gun 6-8 inches from the surface. A first coat of GF Sanding Sealer can add build on raw wood.\u003c\/li\u003e\n\u003cli\u003eSand between coats with a fine (220-320) foam pad and remove dust. Never store mixed product in a closed container, since pressure can build up.\u003c\/li\u003e\n\u003cli\u003eAllow 72 hours before light use and 7 days to cure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use it, or any clear coat, over white or light paints such as GF Milk Paint or White Poly; it may cause yellowing.\u003c\/li\u003e\n\u003cli\u003eNot for use as a toner and not tintable. Do not use with linseed or Danish oils.\u003c\/li\u003e\n\u003cli\u003eSpray only by design; face frames and edges can be done with a pad or small cabinet roller, but large areas may not level by hand.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes SDS UL-GEF-005 for Enduro Conversion Varnish Satin (revised 28-Feb-2025) lists the varnish as not classified, with no signal word and no Prop 65 chemicals. The required NCO Catalyst is different: its SDS (version 7, reviewed 08\/01\/2018) carries the signal word Danger: harmful if inhaled, causes skin irritation and serious eye damage, may cause an allergic skin reaction and respiratory irritation, and its label says combustible liquid. Wear gloves and eye protection when mixing, and GF's page says to wear a self-contained breathing apparatus or NIOSH\/MSHA-approved respirator when spraying. Keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eFor a lower-cost, faster-stacking clear see \u003ca href=\"\/products\/general-finishes-enduro-pre-cat-lacquer-clear-satin-gallon\"\u003eEnduro Pre-Cat Lacquer, Satin\u003c\/a\u003e, or compare \u003ca href=\"\/products\/general-finishes-enduro-2k-polyurethane-clear-satin-gallon\"\u003eEnduro 2K Polyurethane, Satin\u003c\/a\u003e. Shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes Enduro Conversion Varnish need a catalyst?\u003c\/strong\u003e Yes. Mix in up to 10% General Finishes NCO Catalyst by volume (3.2 oz per quart, 12.8 oz per gallon) before use. The catalyst is a separate GF product and is not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is it usable once mixed?\u003c\/strong\u003e The GF TDS gives a pot life of about 6 hours; the product page says leftover mixed product solidifies after 6-8 hours. Mix only what you will use, and never store mixed product in a closed container.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and when can I use it?\u003c\/strong\u003e 3 coats (4 in high-moisture areas), sprayed 3-5 mils wet. Allow 72 hours before light use and 7 days to cure at 70°F and 50% humidity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere should I use it?\u003c\/strong\u003e GF rates it high durability for high-use projects such as kitchen cabinets, bathroom vanities, bar tops and commercial table tops, and rates it for interior or exterior use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-conversion-2k-varnish\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro Conversion Varnish product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2025-07\/TDS-Enduro-Conversion-Varnish-General-Finishes-2025-07-16.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Conversion Varnish (2025-07 file, published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2025-03\/SDS-ENGLISH-Enduro-Conversion-Varnish-SATIN-Water-Base-General-Finishes-US-HCS-2012-v1-2025-02-28.PDF\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS UL-GEF-005 Conversion Varnish Satin, rev 28-Feb-2025\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2023-05\/SDS-NCO-Catalyst-General-Finishes-US-HCS-2012-v4.7-2018-08-01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS NCO Catalyst, v7 reviewed 08\/01\/2018\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256526134,"sku":"196-704","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016103614_1_0124.jpg?v=1791582156"},{"product_id":"general-finishes-enduro-water-based-white-poly-satin-gallon","title":"General Finishes Enduro Water-Based White Poly, Satin, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro Water-Based White Poly, Satin, Gallon\u003c\/strong\u003e (GF GWS) is a professional high-solids, pigmented white water-based wood finish engineered for cabinets and millwork. It is a urethane\/acrylic blend that sprays from the can without thinning, builds quickly, is self-sealing, and is PFAS-free. GF recommends using it over Enduro White Undercoat or Stain Blocker. It is stocked in white and is short-filled 5% so it can also be tinted at the point of use. GF labels it for professional, industrial and OEM non-architectural use.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Enduro White Poly product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eGallon, Satin, gloss units 25-35 (TDS: 30) (GF GWS, UPC 606016105151)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based urethane\/acrylic blend, pigmented white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only: cabinets, trim, doors, furniture and millwork, over raw wood or properly primed existing finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTack free 5-10 minutes, sand 30-45 minutes, touch 30+ minutes, recoat 1+ hour (product page; the TDS says 2 hours), light use 7-10 days, cure 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray, 3-5 mils wet; HVLP 1.3-1.5 mm tip. Engineered for spray only; face frames, edges and drawer fronts can be done with a small 3\/8 in. nap microfiber cabinet roller and 10-20% GF Extender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eReady to spray; thin if desired with distilled water, starting at 5% and up to 10% by volume. GF Extender 10-15% where allowed (more than 2% is not SCAQMD compliant in California)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eSatin 45% by weight, 33% by volume (product page); the TDS lists 43% by weight, 37% (Flat) to 32% (Semi-Gloss) by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eMedium, 600-800 cPs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurability\u003c\/th\u003e\n\u003ctd\u003eHigh (GF rating); Koenig hardness 59, water resistance 5 of 5, chemical resistance 88 of 105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTinting\u003c\/th\u003e\n\u003ctd\u003eShort-filled 5%; GF recommends Colourfal zero-VOC colorants added at the point of use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water or GF Brush \u0026amp; Gun Cleaner right after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eSatin under 250 g\/L (product page and SDS UL-GEF-096, revised 14-Jul-2023); the TDS (March 2020) lists under 210 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sunlight, tightly sealed (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eGWS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand with 120 grit, then 150 or 220 grit, and remove the dust. Sealed surfaces: scuff-clean with a non-woven pad and a 50:50 mix of denatured alcohol and water, dry 1-2 hours, sand lightly with a 220-320 sponge and remove the dust.\u003c\/li\u003e\n\u003cli\u003ePrime: on raw wood, apply 2 coats of GF Stain Blocker or White Undercoat if needed; over an existing finish, always apply 2 coats of GF Stain Blocker for adhesion and to stop bleed-through.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use and test color and adhesion over existing finishes. Thin only if needed.\u003c\/li\u003e\n\u003cli\u003eStrain and spray 3 coats, 3-5 mils wet, with the gun 6-8 inches from the surface. For faster build on raw wood, GF says a first coat of GF Sanding Sealer can be followed by 2 coats of White Poly.\u003c\/li\u003e\n\u003cli\u003eRecoat after 1+ hour, sanding between coats with a 220-320 sponge and removing the dust. No topcoat is required. Allow 21 days to cure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not put any clear topcoat over White Poly; it may cause yellowing.\u003c\/li\u003e\n\u003cli\u003eTannin bleed-through is unpredictable and can show up months later; oak, pine, mahogany and Douglas fir are especially prone, and knots tend to bleed. MDF may cast brown unless primed. Metal needs a metal primer first, and laminate may take it only with a bonding primer.\u003c\/li\u003e\n\u003cli\u003eDo not use with linseed or Danish oils. Let oil-based products dry 72+ hours before applying White Poly over them.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes SDS UL-GEF-096 for Enduro White Poly Satin (revised 14-Jul-2023) carries the signal word Warning: may cause an allergic skin reaction. Its Prop 65 section lists titanium dioxide, quartz, 1,4-dioxane, formaldehyde, acetaldehyde and ethylene oxide (carcinogens) and methanol and methyl chloride (developmental). Wear chemical-resistant gloves, use good ventilation and a NIOSH-approved respirator and eye protection when spraying, and keep out of reach of children. If you sand or scrape old paint, it may contain lead; follow EPA lead-safe practices.\u003c\/p\u003e\n\u003cp\u003ePrime with \u003ca href=\"\/products\/general-finishes-enduro-white-undercoat-sanding-sealer-gallon\"\u003eGF Enduro White Undercoat\u003c\/a\u003e, and add \u003ca href=\"\/products\/general-finishes-enduro-extender-clear-pint\"\u003eGF Enduro Extender\u003c\/a\u003e for roller work or dry climates. See more \u003ca href=\"\/collections\/cabinet-refinishing\"\u003ecabinet refinishing\u003c\/a\u003e supplies and all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a primer under Enduro White Poly?\u003c\/strong\u003e On raw wood, GF says to apply 2 coats of GF Stain Blocker or White Undercoat if needed. Over an existing finish, GF says to always apply 2 coats of Stain Blocker for adhesion and to stop bleed-through.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a clear topcoat?\u003c\/strong\u003e No topcoat is required. GF says not to put any clear topcoat over White Poly, because it may cause yellowing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I brush it?\u003c\/strong\u003e It is engineered for spray (HVLP 1.3-1.5 mm). Face frames, edges and drawer fronts can be done with a small 3\/8 in. nap microfiber cabinet roller and 10-20% GF Extender.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e 3 coats, 3-5 mils wet. At 70°F and 50% humidity it is tack free in 5-10 minutes, ready to sand in 30-45 minutes and ready to recoat in 1+ hour (the TDS says 2 hours). Allow 21 days to cure. GF lists coverage of 450 sq ft per gallon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-paints-glazes-and-pigmented-top-coats\/enduro-pigmented-white\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro White Poly product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2020-04\/TDS-2020-03-Enduro-White-Poly-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Enduro White Poly, published March 2020\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2023-08\/SDS-ENGLISH-Enduro-White-Poly-SATIN-Water-Base-General-Finishes-US-HCS-2012-v1-2023-07-14.PDF\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS UL-GEF-096 Enduro White Poly Satin, rev 14-Jul-2023\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256591670,"sku":"196-717","price":124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016105151_1_0124.jpg?v=1791582158"},{"product_id":"general-finishes-enduro-water-based-extender-clear-4-oz","title":"General Finishes Enduro Water-Based Extender, Clear, 4 oz","description":"\u003cp\u003eGeneral Finishes Extender is a water-based wetting additive that slows the drying time and improves the flow and leveling of General Finishes water-based stains, topcoats, primers, glazes and paints. GF recommends it for large surfaces and for finishing in hot or dry rooms, where a finish can dry before it levels out, and highly recommends it with GF Glaze Effects. It is for water-based products only; do not add it to oil-based finishes. This is the 4 oz bottle.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePerformance additive, water-based, clear (no ambering)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse with\u003c\/th\u003e\n\u003ctd\u003eGeneral Finishes water-based stains, topcoats, primers, glazes and paints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHow much to add\u003c\/th\u003e\n\u003ctd\u003eStart at 5% by volume, about 1.5 oz per quart (GF TDS). GF's current directions say 10 to 15% where local rules allow. Do not go over 15%, about 5 oz per quart.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e4 oz. GF also makes 16 oz (pint), gallons and 5 gallon pails.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 1,025 g\/L as packaged; see the VOC note below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClean up\u003c\/th\u003e\n\u003ctd\u003eSoap and water for hands; GF Brush \u0026amp; Gun Cleaner for equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eKeep between 50 and 100 F. GF says its additives will not freeze, but heat-damaged product cannot be saved.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eEX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eSlowly add Extender to the water-based finish, starting at 5% by volume.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly to blend it in.\u003c\/li\u003e\n\u003cli\u003eTest on scrap or a hidden spot before the full job.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhen should I use Extender?\u003c\/h4\u003e\n\u003cp\u003eWhen a water-based finish dries before it can flow out and level. GF recommends it for finishing large areas and for warm or dry rooms. If the problem is a cold or humid room where the finish dries too slowly, GF makes Accelerator for that instead.\u003c\/p\u003e\n\u003ch4\u003eCan I store a can of finish after adding Extender?\u003c\/h4\u003e\n\u003cp\u003eYes. General Finishes says mixes of its water-based products with up to 15% Extender can be stored, and Extender does not change the shelf life of the product it is added to.\u003c\/p\u003e\n\u003ch4\u003eDoes Extender raise the VOC of my finish?\u003c\/h4\u003e\n\u003cp\u003eYes, it adds VOC. GF says it can be used in VOC-regulated areas only as long as the amount added keeps the finish under the legal limit, and that amount varies by product. GF notes that in California, adding more than 2% makes its products non-compliant with SCAQMD rules.\u003c\/p\u003e\n\u003ch4\u003eCan I use it to wipe off Glaze Effects?\u003c\/h4\u003e\n\u003cp\u003eYes. GF says to dampen a cloth or paper towel with Extender to remove freshly applied, dry Glaze Effects.\u003c\/p\u003e\n\u003cp\u003eAlso sold here in a \u003ca href=\"\/products\/general-finishes-enduro-extender-clear-pint\"\u003epint\u003c\/a\u003e. Pair it with \u003ca href=\"\/collections\/general-finishes-high-performance\"\u003eGeneral Finishes High Performance topcoat\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-glaze-effects-clear-base-pint\"\u003eGlaze Effects\u003c\/a\u003e or \u003ca href=\"\/collections\/general-finishes-milk-paint\"\u003eGF Milk Paint\u003c\/a\u003e, or shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673256722742,"sku":"196-727","price":7.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016110452.jpg?v=1791582160"},{"product_id":"general-finishes-enduro-rtm-water-based-stain-strong-black-quart","title":"General Finishes Enduro RTM Water-Based Stain, Strong Black, Quart","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro RTM Water-Based Stain, Strong Black, Quart\u003c\/strong\u003e (GF QSTB) is one of the stock colors in General Finishes' Enduro Ready to Match (RTM) system, a professional water-based wood stain made from a mix of dyes and pigments to look like an oil-based stain. Use it as is, or intermix RTM colors and the RTM Clear Base to build your own shade with GF's formula book and chip box. It is for interior raw wood such as cabinets, trim, doors and furniture, brushes, rolls, pads or sprays on, and always gets a clear topcoat.\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes RTM product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and color\u003c\/th\u003e\n\u003ctd\u003eQuart, Strong Black (GF QSTB, UPC 606016121335)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWater-based dye and pigment stain (Enduro stain concentrate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only, on raw wood. Not for use over existing finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e110-125 sq ft per quart (product page); the 2020 TDS says up to 600 sq ft per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1 coat; an optional second coat deepens the color. No more than 2 coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTack-free 15-30 minutes, recoat 30-45 minutes, topcoat 1-2 hours at 70°F and 50% humidity (product page directions). The 2020 TDS lists 30 minutes to touch and 2 hours to recoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat\u003c\/th\u003e\n\u003ctd\u003eRequired: 3 coats of a GF topcoat. Wait at least 24 hours before an oil-based topcoat such as Arm-R-Seal or Gel Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle brush, foam brush, pad, staining pad or microfiber roller, or spray (HVLP 0.9-1.1 mm tip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and add up to 10% by volume. Up to 5% GF Extender adds open time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eunder 115 g\/L for Strong Black (product page); SDS: under 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight solids\u003c\/th\u003e\n\u003ctd\u003e15% (product page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eHands with soap and water; equipment with GF Brush \u0026amp; Gun Cleaner (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sun, tightly sealed; best used within 1 year of the date on the can (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (oak, ash, mahogany) with 120, then 150, then 180 grit. Sand closed-grain wood (cherry, pine, maple, birch, alder) with 150, then 220 grit. Remove any existing finish first. Don't use steel wool with water-based finishes.\u003c\/li\u003e\n\u003cli\u003eRemove the dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag. To cut grain raise, dampen the wood, let it dry and sand lightly with a 220-320 pad.\u003c\/li\u003e\n\u003cli\u003eStir the stain before and during use, and test your full finishing schedule (stain plus topcoat) on a scrap of the same wood.\u003c\/li\u003e\n\u003cli\u003eWork one section at a time. Apply a liberal amount, then wipe the excess off evenly with the grain using a quality paper or shop towel (not a cotton t-shirt). Keep a wet edge to avoid lap marks.\u003c\/li\u003e\n\u003cli\u003eFor blotch-prone woods such as pine, GF says an initial coat of \u003ca href=\"\/products\/general-finishes-pre-stain-conditioner-natural-quart\"\u003eGF Pre-Stain Conditioner\u003c\/a\u003e can even out the color (you may need a darker stain).\u003c\/li\u003e\n\u003cli\u003eLet it dry, add a second coat only if you want more depth, then seal with 3 coats of GF topcoat. After the first topcoat coat, sand grain raise lightly with a 220 pad without cutting through to the stain.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes SDS UL-GEF-026 (revised 13-Dec-2024) for RTM Strong Black carries the signal word Warning: may cause an allergic skin reaction (skin sensitizer, Category 1). Wear protective gloves, avoid breathing spray mist, and wash skin with soap and water if it gets on you. The SDS also lists California Prop 65 chemicals (carbon black and methyl isobutyl ketone).\u003c\/p\u003e\n\u003cp\u003eOther RTM colors we carry: \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-bordeaux-quart\"\u003eBordeaux\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-raw-sienna-quart\"\u003eRaw Sienna\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-rtm-water-based-stain-tint-white-quart\"\u003eTint White\u003c\/a\u003e. Seal it with \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-quart\"\u003eGF High Performance Topcoat\u003c\/a\u003e, or browse all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e products.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-wood-stains-dye-stains\/enduro-ready-to-match-rtm-water-based\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro RTM product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2020-04\/TDS-2020-03-Enduro-RTM-Wood-Stain-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEnduro RTM TDS (published March 2020)\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2025-02\/SDS-ENGLISH-Enduro-RTM-Stain-STRONG-BLACK-Water-Base-General-Finishes-US-HCS-2012-v1-2024-12-13.PDF\" target=\"_blank\" rel=\"noopener\"\u003eRTM Strong Black SDS UL-GEF-026, rev 13-Dec-2024\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673259901238,"sku":"196-903","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121335_1_0124.jpg?v=1791730298"},{"product_id":"general-finishes-enduro-var-ii-topcoat-amber-flat-gallon","title":"General Finishes Enduro-Var II Topcoat, Amber, Flat, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro-Var II Topcoat, Amber, Flat, Gallon\u003c\/strong\u003e (GF B087-GA) is an oil-modified, water-based urethane that gives wood a warm amber tone like a traditional oil-based varnish. It replaces General Finishes' original Enduro-Var, is made with more than 70% renewable resources, dries to a lighter amber than the old formula, and is compatible with all GF products. It is highly water-resistant, self-sealing, and can be brushed, rolled or sprayed. \"Amber\" is the dried tone: GF notes the finish has a slight pink cast in the can that dries to a light amber, and it brings out grain on woods such as padauk, cocobolo and bubinga.\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Enduro-Var II product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eGallon, Flat, gloss units 10 or less (TDS: 10) (GF B087-GA, UPC 606016121373)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-modified water-based urethane (product page); the TDS lists water-based self-crosslinking polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only: cabinets, trim, doors and furniture over raw wood, stain or non-white painted surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e125-150 sq ft per quart, 500-600 sq ft per gallon (product page); up to 600 sq ft per gallon (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 coats; GF says no more than three, since more coats won't improve durability. The TDS says 3-4 total coats when used with a sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTouch 30+ minutes, recoat 2+ hours, light use 7-10 days, cure 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle or foam brush, pad applicator or roller; or spray 3-5 mils wet, HVLP 1.1-1.3 mm tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and up to 10% by volume; GF Extender 10-15% for more open time where local rules allow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eFlat: 28% by weight, 27% by volume (product page); TDS 30% by weight, 28% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eThin, 200-300 cPs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurability\u003c\/th\u003e\n\u003ctd\u003eMedium (GF rating); Koenig hardness 123, water resistance 3 of 5, chemical resistance 84 of 105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTinting\u003c\/th\u003e\n\u003ctd\u003eThe product page lists it as tintable and says it can be used as a toner with 5-10% GF Dye Stain; the TDS says not tintable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water or GF Brush \u0026amp; Gun Cleaner right after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L (product page and TDS); the Flat SDS (issued 08\/15\/2020) lists 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sunlight, tightly sealed; best used within one year of the date on the can (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand with 120 grit, then 150 or 220 grit, and remove the dust with a vacuum, tack cloth or water-dampened rag. Do not use steel wool with water-based finishes. Existing sealed finishes: GF says to remove the finish completely and test the whole finishing schedule over raw wood first.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area. Stir thoroughly before and during use, and test for adhesion.\u003c\/li\u003e\n\u003cli\u003eThin if desired with 5-10% distilled water. Brush, pad or roll a liberal coat along the grain with smooth, even strokes, avoiding pressure and back brushing; or strain and spray 3-5 mils wet.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats, then sand with a fine (220-320) foam pad and remove the dust. Apply 3 coats in total.\u003c\/li\u003e\n\u003cli\u003eTreat gently for 7-10 days and allow 21 days to cure before heavy use or cleaning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use over bright whites; the finish will yellow. For white surfaces GF recommends White Poly or Brushable White Enamel.\u003c\/li\u003e\n\u003cli\u003eFor high-use surfaces such as kitchen tabletops, kitchen cabinets or bath vanities, GF recommends High Performance Topcoat, Enduro Clear Poly or Arm-R-Seal instead, since they have greater water and chemical resistance.\u003c\/li\u003e\n\u003cli\u003eNot compatible with shellac, linseed oils or Danish oils. Let oil-based products dry 72+ hours before applying it over them.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS). Sold in quarts and gallons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes' SDS for Enduro-Var II Flat (product code B087, issued 08\/15\/2020) carries the signal word Warning: causes skin irritation and serious eye irritation, may cause respiratory irritation, and is harmful to aquatic life. Its Prop 65 section names ethylene oxide, 1,4-dioxane, ethanediol and perfluorooctanoic acid; the page's label text for Flat says Warning: harmful if swallowed, causes respiratory tract, eye and skin irritation, and its Prop 65 note names N-methyl-2-pyrrolidone. Use with adequate ventilation, wear gloves and eye protection, wear a NIOSH\/MSHA-approved respirator when spraying, and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-quart\"\u003eSatin quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-gallon\"\u003eSatin gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-semi-gloss-quart\"\u003eSemi-Gloss quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-gloss-quart\"\u003eGloss quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-gloss-gallon\"\u003eGloss gallon\u003c\/a\u003e. For a clear, non-ambering option see \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-gallon\"\u003eGF High Performance Topcoat, Satin\u003c\/a\u003e. Shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-topcoats-and-sanding-sealer\/enduro-var-ii-water-based-topcoat\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro-Var II product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/TDS-2020-11-Enduro-Var-Il-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Enduro-Var II, published Nov 2020\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/SDS-Enduro-Var-II-Topcoat-Flat-General-Finishes-US-HCS-2012-v4.7-2020-08-15.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS Enduro-Var II Flat, issued 08\/15\/2020\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673260458294,"sku":"197-201","price":127.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121373.jpg?v=1791582269"},{"product_id":"general-finishes-enduro-var-ii-topcoat-amber-satin-quart","title":"General Finishes Enduro-Var II Topcoat, Amber, Satin, Quart","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro-Var II Topcoat, Amber, Satin, Quart\u003c\/strong\u003e (GF B089-QT) is an oil-modified, water-based urethane that gives wood a warm amber tone like a traditional oil-based varnish. It replaces General Finishes' original Enduro-Var, is made with more than 70% renewable resources, dries to a lighter amber than the old formula, and is compatible with all GF products. It is highly water-resistant, self-sealing, and can be brushed, rolled or sprayed. \"Amber\" is the dried tone: GF notes the finish has a slight pink cast in the can that dries to a light amber, and it brings out grain on woods such as padauk, cocobolo and bubinga.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Enduro-Var II product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eQuart, Satin, gloss units 25-35 (TDS: 30) (GF B089-QT, UPC 606016121397)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-modified water-based urethane (product page); the TDS lists water-based self-crosslinking polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only: cabinets, trim, doors and furniture over raw wood, stain or non-white painted surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e125-150 sq ft per quart, 500-600 sq ft per gallon (product page); up to 600 sq ft per gallon (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 coats; GF says no more than three, since more coats won't improve durability. The TDS says 3-4 total coats when used with a sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTouch 30+ minutes, recoat 2+ hours, light use 7-10 days, cure 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle or foam brush, pad applicator or roller; or spray 3-5 mils wet, HVLP 1.1-1.3 mm tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and up to 10% by volume; GF Extender 10-15% for more open time where local rules allow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eSatin: 30% by weight, 29% by volume (product page); TDS 30% by weight, 28% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eThin, 200-300 cPs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurability\u003c\/th\u003e\n\u003ctd\u003eMedium (GF rating); Koenig hardness 123, water resistance 3 of 5, chemical resistance 84 of 105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTinting\u003c\/th\u003e\n\u003ctd\u003eThe product page lists it as tintable and says it can be used as a toner with 5-10% GF Dye Stain; the TDS says not tintable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water or GF Brush \u0026amp; Gun Cleaner right after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L (product page and TDS); the Satin SDS (issued 08\/15\/2020) lists 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sunlight, tightly sealed; best used within one year of the date on the can (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand with 120 grit, then 150 or 220 grit, and remove the dust with a vacuum, tack cloth or water-dampened rag. Do not use steel wool with water-based finishes. Existing sealed finishes: GF says to remove the finish completely and test the whole finishing schedule over raw wood first.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area. Stir thoroughly before and during use, and test for adhesion.\u003c\/li\u003e\n\u003cli\u003eThin if desired with 5-10% distilled water. Brush, pad or roll a liberal coat along the grain with smooth, even strokes, avoiding pressure and back brushing; or strain and spray 3-5 mils wet.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats, then sand with a fine (220-320) foam pad and remove the dust. Apply 3 coats in total.\u003c\/li\u003e\n\u003cli\u003eTreat gently for 7-10 days and allow 21 days to cure before heavy use or cleaning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use over bright whites; the finish will yellow. For white surfaces GF recommends White Poly or Brushable White Enamel.\u003c\/li\u003e\n\u003cli\u003eFor high-use surfaces such as kitchen tabletops, kitchen cabinets or bath vanities, GF recommends High Performance Topcoat, Enduro Clear Poly or Arm-R-Seal instead, since they have greater water and chemical resistance.\u003c\/li\u003e\n\u003cli\u003eNot compatible with shellac, linseed oils or Danish oils. Let oil-based products dry 72+ hours before applying it over them.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS). Sold in quarts and gallons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes' SDS for Enduro-Var II Satin (product code B089, issued 08\/15\/2020) carries the signal word Warning: causes skin irritation and serious eye irritation, may cause respiratory irritation, and is harmful to aquatic life. Its Prop 65 section names ethylene oxide, 1,4-dioxane, ethanediol and perfluorooctanoic acid; the page's label text for Satin, Semi-Gloss and Gloss is stronger than the SDS: Danger, causes severe eye and skin burns, harmful if swallowed, causes respiratory tract irritation, and its Prop 65 note names N-methyl-2-pyrrolidone. Use with adequate ventilation, wear gloves and eye protection, wear a NIOSH\/MSHA-approved respirator when spraying, and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-flat-gallon\"\u003eFlat gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-gallon\"\u003eSatin gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-semi-gloss-quart\"\u003eSemi-Gloss quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-gloss-quart\"\u003eGloss quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-gloss-gallon\"\u003eGloss gallon\u003c\/a\u003e. For a clear, non-ambering option see \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-gallon\"\u003eGF High Performance Topcoat, Satin\u003c\/a\u003e. Shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does Amber mean on Enduro-Var II?\u003c\/strong\u003e It dries to a warm, light amber tone like a traditional oil-based varnish. GF notes it has a slight pink cast in the can that dries to light amber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I brush it?\u003c\/strong\u003e Yes. GF lists it as brushable, rollable and sprayable: synthetic bristle or foam brush, pad or roller, or spray 3-5 mils wet with an HVLP 1.1-1.3 mm tip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e 3 coats. Dry 2+ hours between coats at 70°F and 50% humidity, treat gently for 7-10 days and allow 21 days to cure. GF lists coverage of 125-150 sq ft per quart.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put it over an existing finish?\u003c\/strong\u003e GF lists it as not for use over existing finishes; its directions say to remove the old finish completely and test over raw wood. It is interior only and should not go over bright whites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-topcoats-and-sanding-sealer\/enduro-var-ii-water-based-topcoat\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro-Var II product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/TDS-2020-11-Enduro-Var-Il-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Enduro-Var II, published Nov 2020\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/SDS-Enduro-Var-II-Topcoat-Satin-General-Finishes-US-HCS-2012-v4.7-2020-08-15.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS Enduro-Var II Satin, issued 08\/15\/2020\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673260491062,"sku":"197-203","price":51.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121397.jpg?v=1791582271"},{"product_id":"general-finishes-enduro-var-ii-topcoat-amber-satin-gallon","title":"General Finishes Enduro-Var II Topcoat, Amber, Satin, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro-Var II Topcoat, Amber, Satin, Gallon\u003c\/strong\u003e (GF B089-GA) is an oil-modified, water-based urethane that gives wood a warm amber tone like a traditional oil-based varnish. It replaces General Finishes' original Enduro-Var, is made with more than 70% renewable resources, dries to a lighter amber than the old formula, and is compatible with all GF products. It is highly water-resistant, self-sealing, and can be brushed, rolled or sprayed. \"Amber\" is the dried tone: GF notes the finish has a slight pink cast in the can that dries to a light amber, and it brings out grain on woods such as padauk, cocobolo and bubinga.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Enduro-Var II product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eGallon, Satin, gloss units 25-35 (TDS: 30) (GF B089-GA, UPC 606016121403)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-modified water-based urethane (product page); the TDS lists water-based self-crosslinking polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only: cabinets, trim, doors and furniture over raw wood, stain or non-white painted surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e125-150 sq ft per quart, 500-600 sq ft per gallon (product page); up to 600 sq ft per gallon (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 coats; GF says no more than three, since more coats won't improve durability. The TDS says 3-4 total coats when used with a sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTouch 30+ minutes, recoat 2+ hours, light use 7-10 days, cure 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle or foam brush, pad applicator or roller; or spray 3-5 mils wet, HVLP 1.1-1.3 mm tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and up to 10% by volume; GF Extender 10-15% for more open time where local rules allow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eSatin: 30% by weight, 29% by volume (product page); TDS 30% by weight, 28% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eThin, 200-300 cPs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurability\u003c\/th\u003e\n\u003ctd\u003eMedium (GF rating); Koenig hardness 123, water resistance 3 of 5, chemical resistance 84 of 105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTinting\u003c\/th\u003e\n\u003ctd\u003eThe product page lists it as tintable and says it can be used as a toner with 5-10% GF Dye Stain; the TDS says not tintable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water or GF Brush \u0026amp; Gun Cleaner right after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L (product page and TDS); the Satin SDS (issued 08\/15\/2020) lists 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sunlight, tightly sealed; best used within one year of the date on the can (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand with 120 grit, then 150 or 220 grit, and remove the dust with a vacuum, tack cloth or water-dampened rag. Do not use steel wool with water-based finishes. Existing sealed finishes: GF says to remove the finish completely and test the whole finishing schedule over raw wood first.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area. Stir thoroughly before and during use, and test for adhesion.\u003c\/li\u003e\n\u003cli\u003eThin if desired with 5-10% distilled water. Brush, pad or roll a liberal coat along the grain with smooth, even strokes, avoiding pressure and back brushing; or strain and spray 3-5 mils wet.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats, then sand with a fine (220-320) foam pad and remove the dust. Apply 3 coats in total.\u003c\/li\u003e\n\u003cli\u003eTreat gently for 7-10 days and allow 21 days to cure before heavy use or cleaning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use over bright whites; the finish will yellow. For white surfaces GF recommends White Poly or Brushable White Enamel.\u003c\/li\u003e\n\u003cli\u003eFor high-use surfaces such as kitchen tabletops, kitchen cabinets or bath vanities, GF recommends High Performance Topcoat, Enduro Clear Poly or Arm-R-Seal instead, since they have greater water and chemical resistance.\u003c\/li\u003e\n\u003cli\u003eNot compatible with shellac, linseed oils or Danish oils. Let oil-based products dry 72+ hours before applying it over them.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS). Sold in quarts and gallons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes' SDS for Enduro-Var II Satin (product code B089, issued 08\/15\/2020) carries the signal word Warning: causes skin irritation and serious eye irritation, may cause respiratory irritation, and is harmful to aquatic life. Its Prop 65 section names ethylene oxide, 1,4-dioxane, ethanediol and perfluorooctanoic acid; the page's label text for Satin, Semi-Gloss and Gloss is stronger than the SDS: Danger, causes severe eye and skin burns, harmful if swallowed, causes respiratory tract irritation, and its Prop 65 note names N-methyl-2-pyrrolidone. Use with adequate ventilation, wear gloves and eye protection, wear a NIOSH\/MSHA-approved respirator when spraying, and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-flat-gallon\"\u003eFlat gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-quart\"\u003eSatin quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-semi-gloss-quart\"\u003eSemi-Gloss quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-gloss-quart\"\u003eGloss quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-gloss-gallon\"\u003eGloss gallon\u003c\/a\u003e. For a clear, non-ambering option see \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-gallon\"\u003eGF High Performance Topcoat, Satin\u003c\/a\u003e. Shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does Amber mean on Enduro-Var II?\u003c\/strong\u003e It dries to a warm, light amber tone like a traditional oil-based varnish. GF notes it has a slight pink cast in the can that dries to light amber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I brush it?\u003c\/strong\u003e Yes. GF lists it as brushable, rollable and sprayable: synthetic bristle or foam brush, pad or roller, or spray 3-5 mils wet with an HVLP 1.1-1.3 mm tip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e 3 coats. Dry 2+ hours between coats at 70°F and 50% humidity, treat gently for 7-10 days and allow 21 days to cure. GF lists coverage of 500-600 sq ft per gallon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put it over an existing finish?\u003c\/strong\u003e GF lists it as not for use over existing finishes; its directions say to remove the old finish completely and test over raw wood. It is interior only and should not go over bright whites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-topcoats-and-sanding-sealer\/enduro-var-ii-water-based-topcoat\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro-Var II product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/TDS-2020-11-Enduro-Var-Il-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Enduro-Var II, published Nov 2020\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/SDS-Enduro-Var-II-Topcoat-Satin-General-Finishes-US-HCS-2012-v4.7-2020-08-15.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS Enduro-Var II Satin, issued 08\/15\/2020\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673260982582,"sku":"197-204","price":127.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121403.jpg?v=1791582273"},{"product_id":"general-finishes-enduro-var-ii-topcoat-amber-semi-gloss-quart","title":"General Finishes Enduro-Var II Topcoat, Amber, Semi-Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro-Var II Topcoat, Amber, Semi-Gloss, Quart\u003c\/strong\u003e (GF B090-QT) is an oil-modified, water-based urethane that gives wood a warm amber tone like a traditional oil-based varnish. It replaces General Finishes' original Enduro-Var, is made with more than 70% renewable resources, dries to a lighter amber than the old formula, and is compatible with all GF products. It is highly water-resistant, self-sealing, and can be brushed, rolled or sprayed. \"Amber\" is the dried tone: GF notes the finish has a slight pink cast in the can that dries to a light amber, and it brings out grain on woods such as padauk, cocobolo and bubinga.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Enduro-Var II product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eQuart, Semi-Gloss, gloss units 50-60 (TDS: 55) (GF B090-QT, UPC 606016121427)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-modified water-based urethane (product page); the TDS lists water-based self-crosslinking polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only: cabinets, trim, doors and furniture over raw wood, stain or non-white painted surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e125-150 sq ft per quart, 500-600 sq ft per gallon (product page); up to 600 sq ft per gallon (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 coats; GF says no more than three, since more coats won't improve durability. The TDS says 3-4 total coats when used with a sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTouch 30+ minutes, recoat 2+ hours, light use 7-10 days, cure 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle or foam brush, pad applicator or roller; or spray 3-5 mils wet, HVLP 1.1-1.3 mm tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and up to 10% by volume; GF Extender 10-15% for more open time where local rules allow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eSemi-Gloss: 29% by weight, 28% by volume (product page); TDS 30% by weight, 28% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eThin, 200-300 cPs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurability\u003c\/th\u003e\n\u003ctd\u003eMedium (GF rating); Koenig hardness 123, water resistance 3 of 5, chemical resistance 84 of 105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTinting\u003c\/th\u003e\n\u003ctd\u003eThe product page lists it as tintable and says it can be used as a toner with 5-10% GF Dye Stain; the TDS says not tintable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water or GF Brush \u0026amp; Gun Cleaner right after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L (product page and TDS); the Semi-Gloss SDS (issued 08\/15\/2020) lists 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sunlight, tightly sealed; best used within one year of the date on the can (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand with 120 grit, then 150 or 220 grit, and remove the dust with a vacuum, tack cloth or water-dampened rag. Do not use steel wool with water-based finishes. Existing sealed finishes: GF says to remove the finish completely and test the whole finishing schedule over raw wood first.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area. Stir thoroughly before and during use, and test for adhesion.\u003c\/li\u003e\n\u003cli\u003eThin if desired with 5-10% distilled water. Brush, pad or roll a liberal coat along the grain with smooth, even strokes, avoiding pressure and back brushing; or strain and spray 3-5 mils wet.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats, then sand with a fine (220-320) foam pad and remove the dust. Apply 3 coats in total.\u003c\/li\u003e\n\u003cli\u003eTreat gently for 7-10 days and allow 21 days to cure before heavy use or cleaning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use over bright whites; the finish will yellow. For white surfaces GF recommends White Poly or Brushable White Enamel.\u003c\/li\u003e\n\u003cli\u003eFor high-use surfaces such as kitchen tabletops, kitchen cabinets or bath vanities, GF recommends High Performance Topcoat, Enduro Clear Poly or Arm-R-Seal instead, since they have greater water and chemical resistance.\u003c\/li\u003e\n\u003cli\u003eNot compatible with shellac, linseed oils or Danish oils. Let oil-based products dry 72+ hours before applying it over them.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS). Sold in quarts and gallons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes' SDS for Enduro-Var II Semi-Gloss (product code B090, issued 08\/15\/2020) carries the signal word Warning: causes skin irritation and serious eye irritation, may cause respiratory irritation, and is harmful to aquatic life. Its Prop 65 section names ethylene oxide, 1,4-dioxane, ethanediol and perfluorooctanoic acid; the page's label text for Satin, Semi-Gloss and Gloss is stronger than the SDS: Danger, causes severe eye and skin burns, harmful if swallowed, causes respiratory tract irritation, and its Prop 65 note names N-methyl-2-pyrrolidone. Use with adequate ventilation, wear gloves and eye protection, wear a NIOSH\/MSHA-approved respirator when spraying, and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-flat-gallon\"\u003eFlat gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-quart\"\u003eSatin quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-gallon\"\u003eSatin gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-gloss-quart\"\u003eGloss quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-gloss-gallon\"\u003eGloss gallon\u003c\/a\u003e. For a clear, non-ambering option see \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-gallon\"\u003eGF High Performance Topcoat, Satin\u003c\/a\u003e. Shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does Amber mean on Enduro-Var II?\u003c\/strong\u003e It dries to a warm, light amber tone like a traditional oil-based varnish. GF notes it has a slight pink cast in the can that dries to light amber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I brush it?\u003c\/strong\u003e Yes. GF lists it as brushable, rollable and sprayable: synthetic bristle or foam brush, pad or roller, or spray 3-5 mils wet with an HVLP 1.1-1.3 mm tip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e 3 coats. Dry 2+ hours between coats at 70°F and 50% humidity, treat gently for 7-10 days and allow 21 days to cure. GF lists coverage of 125-150 sq ft per quart.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put it over an existing finish?\u003c\/strong\u003e GF lists it as not for use over existing finishes; its directions say to remove the old finish completely and test over raw wood. It is interior only and should not go over bright whites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-topcoats-and-sanding-sealer\/enduro-var-ii-water-based-topcoat\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro-Var II product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/TDS-2020-11-Enduro-Var-Il-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Enduro-Var II, published Nov 2020\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/SDS-Enduro-Var-II-Topcoat-Semi-Gloss-General-Finishes-US-HCS-2012-v4.7-2020-08-15.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS Enduro-Var II Semi-Gloss, issued 08\/15\/2020\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673261015350,"sku":"197-206","price":56.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121427.jpg?v=1791582275"},{"product_id":"general-finishes-enduro-var-ii-topcoat-amber-gloss-quart","title":"General Finishes Enduro-Var II Topcoat, Amber, Gloss, Quart","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro-Var II Topcoat, Amber, Gloss, Quart\u003c\/strong\u003e (GF B088-QT) is an oil-modified, water-based urethane that gives wood a warm amber tone like a traditional oil-based varnish. It replaces General Finishes' original Enduro-Var, is made with more than 70% renewable resources, dries to a lighter amber than the old formula, and is compatible with all GF products. It is highly water-resistant, self-sealing, and can be brushed, rolled or sprayed. \"Amber\" is the dried tone: GF notes the finish has a slight pink cast in the can that dries to a light amber, and it brings out grain on woods such as padauk, cocobolo and bubinga.\u003c\/p\u003e\n\u003cp class=\"pwd-shiptime\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Free shipping at $35+ (lower 48 + DC); under $35, shipping is a flat $5.99. \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"pwd-returns\"\u003e\u003cstrong\u003eReturns:\u003c\/strong\u003e 30-day returns on unused, unopened items; opened paint, aerosols and flammable liquids can't be returned (\u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e).\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Enduro-Var II product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eQuart, Gloss, gloss units 80+ (TDS: 85+) (GF B088-QT, UPC 606016121458)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-modified water-based urethane (product page); the TDS lists water-based self-crosslinking polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only: cabinets, trim, doors and furniture over raw wood, stain or non-white painted surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e125-150 sq ft per quart, 500-600 sq ft per gallon (product page); up to 600 sq ft per gallon (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 coats; GF says no more than three, since more coats won't improve durability. The TDS says 3-4 total coats when used with a sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTouch 30+ minutes, recoat 2+ hours, light use 7-10 days, cure 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle or foam brush, pad applicator or roller; or spray 3-5 mils wet, HVLP 1.1-1.3 mm tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and up to 10% by volume; GF Extender 10-15% for more open time where local rules allow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eGloss: 29% by weight, 28% by volume (product page); TDS 30% by weight, 28% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eThin, 200-300 cPs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurability\u003c\/th\u003e\n\u003ctd\u003eMedium (GF rating); Koenig hardness 123, water resistance 3 of 5, chemical resistance 84 of 105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTinting\u003c\/th\u003e\n\u003ctd\u003eThe product page lists it as tintable and says it can be used as a toner with 5-10% GF Dye Stain; the TDS says not tintable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water or GF Brush \u0026amp; Gun Cleaner right after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L (product page and TDS); the Gloss SDS (issued 08\/15\/2020) lists 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sunlight, tightly sealed; best used within one year of the date on the can (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand with 120 grit, then 150 or 220 grit, and remove the dust with a vacuum, tack cloth or water-dampened rag. Do not use steel wool with water-based finishes. Existing sealed finishes: GF says to remove the finish completely and test the whole finishing schedule over raw wood first.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area. Stir thoroughly before and during use, and test for adhesion.\u003c\/li\u003e\n\u003cli\u003eThin if desired with 5-10% distilled water. Brush, pad or roll a liberal coat along the grain with smooth, even strokes, avoiding pressure and back brushing; or strain and spray 3-5 mils wet.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats, then sand with a fine (220-320) foam pad and remove the dust. Apply 3 coats in total.\u003c\/li\u003e\n\u003cli\u003eTreat gently for 7-10 days and allow 21 days to cure before heavy use or cleaning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use over bright whites; the finish will yellow. For white surfaces GF recommends White Poly or Brushable White Enamel.\u003c\/li\u003e\n\u003cli\u003eFor high-use surfaces such as kitchen tabletops, kitchen cabinets or bath vanities, GF recommends High Performance Topcoat, Enduro Clear Poly or Arm-R-Seal instead, since they have greater water and chemical resistance.\u003c\/li\u003e\n\u003cli\u003eNot compatible with shellac, linseed oils or Danish oils. Let oil-based products dry 72+ hours before applying it over them.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS). Sold in quarts and gallons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes' SDS for Enduro-Var II Gloss (product code B088, issued 08\/15\/2020) carries the signal word Warning: causes skin irritation and serious eye irritation, may cause respiratory irritation, and is harmful to aquatic life. Its Prop 65 section names ethylene oxide, 1,4-dioxane and ethanediol; the page's label text for Satin, Semi-Gloss and Gloss is stronger than the SDS: Danger, causes severe eye and skin burns, harmful if swallowed, causes respiratory tract irritation, and its Prop 65 note names N-methyl-2-pyrrolidone. Use with adequate ventilation, wear gloves and eye protection, wear a NIOSH\/MSHA-approved respirator when spraying, and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-flat-gallon\"\u003eFlat gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-quart\"\u003eSatin quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-gallon\"\u003eSatin gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-semi-gloss-quart\"\u003eSemi-Gloss quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-gloss-gallon\"\u003eGloss gallon\u003c\/a\u003e. For a clear, non-ambering option see \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-gallon\"\u003eGF High Performance Topcoat, Satin\u003c\/a\u003e. Shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eQuestions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does Amber mean on Enduro-Var II?\u003c\/strong\u003e It dries to a warm, light amber tone like a traditional oil-based varnish. GF notes it has a slight pink cast in the can that dries to light amber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I brush it?\u003c\/strong\u003e Yes. GF lists it as brushable, rollable and sprayable: synthetic bristle or foam brush, pad or roller, or spray 3-5 mils wet with an HVLP 1.1-1.3 mm tip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats, and how long between them?\u003c\/strong\u003e 3 coats. Dry 2+ hours between coats at 70°F and 50% humidity, treat gently for 7-10 days and allow 21 days to cure. GF lists coverage of 125-150 sq ft per quart.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put it over an existing finish?\u003c\/strong\u003e GF lists it as not for use over existing finishes; its directions say to remove the old finish completely and test over raw wood. It is interior only and should not go over bright whites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I return it?\u003c\/strong\u003e Yes. We offer 30-day returns on unused, unopened items. Opened paint can't be returned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does shipping cost?\u003c\/strong\u003e Shipping is $5.99 under $35, and free on orders of $35 or more (lower 48 + DC).\u003c\/p\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/general-finishes-enduro\"\u003eGeneral Finishes Enduro line\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-topcoats-and-sanding-sealer\/enduro-var-ii-water-based-topcoat\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro-Var II product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/TDS-2020-11-Enduro-Var-Il-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Enduro-Var II, published Nov 2020\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/SDS-Enduro-Var-II-Topcoat-Gloss-General-Finishes-US-HCS-2012-v4.7-2020-08-15.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS Enduro-Var II Gloss, issued 08\/15\/2020\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673261048118,"sku":"197-209","price":56.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121458.jpg?v=1791582277"},{"product_id":"general-finishes-enduro-var-ii-topcoat-amber-gloss-gallon","title":"General Finishes Enduro-Var II Topcoat, Amber, Gloss, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro-Var II Topcoat, Amber, Gloss, Gallon\u003c\/strong\u003e (GF B088-GA) is an oil-modified, water-based urethane that gives wood a warm amber tone like a traditional oil-based varnish. It replaces General Finishes' original Enduro-Var, is made with more than 70% renewable resources, dries to a lighter amber than the old formula, and is compatible with all GF products. It is highly water-resistant, self-sealing, and can be brushed, rolled or sprayed. \"Amber\" is the dried tone: GF notes the finish has a slight pink cast in the can that dries to a light amber, and it brings out grain on woods such as padauk, cocobolo and bubinga.\u003c\/p\u003e\n\u003ch3\u003eSpecs (General Finishes Enduro-Var II product page and TDS)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize and sheen\u003c\/th\u003e\n\u003ctd\u003eGallon, Gloss, gloss units 80+ (TDS: 85+) (GF B088-GA, UPC 606016121465)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOil-modified water-based urethane (product page); the TDS lists water-based self-crosslinking polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior only: cabinets, trim, doors and furniture over raw wood, stain or non-white painted surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e125-150 sq ft per quart, 500-600 sq ft per gallon (product page); up to 600 sq ft per gallon (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e3 coats; GF says no more than three, since more coats won't improve durability. The TDS says 3-4 total coats when used with a sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry time\u003c\/th\u003e\n\u003ctd\u003eTouch 30+ minutes, recoat 2+ hours, light use 7-10 days, cure 21 days at 70°F and 50% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSynthetic bristle or foam brush, pad applicator or roller; or spray 3-5 mils wet, HVLP 1.1-1.3 mm tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eDistilled water, start at 5% and up to 10% by volume; GF Extender 10-15% for more open time where local rules allow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids\u003c\/th\u003e\n\u003ctd\u003eGloss: 29% by weight, 28% by volume (product page); TDS 30% by weight, 28% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003eThin, 200-300 cPs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurability\u003c\/th\u003e\n\u003ctd\u003eMedium (GF rating); Koenig hardness 123, water resistance 3 of 5, chemical resistance 84 of 105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTinting\u003c\/th\u003e\n\u003ctd\u003eThe product page lists it as tintable and says it can be used as a toner with 5-10% GF Dye Stain; the TDS says not tintable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water or GF Brush \u0026amp; Gun Cleaner right after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eUnder 250 g\/L (product page and TDS); the Gloss SDS (issued 08\/15\/2020) lists 250 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAbove 50°F and below 80°F, out of direct sunlight, tightly sealed; best used within one year of the date on the can (TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRaw wood: sand with 120 grit, then 150 or 220 grit, and remove the dust with a vacuum, tack cloth or water-dampened rag. Do not use steel wool with water-based finishes. Existing sealed finishes: GF says to remove the finish completely and test the whole finishing schedule over raw wood first.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area. Stir thoroughly before and during use, and test for adhesion.\u003c\/li\u003e\n\u003cli\u003eThin if desired with 5-10% distilled water. Brush, pad or roll a liberal coat along the grain with smooth, even strokes, avoiding pressure and back brushing; or strain and spray 3-5 mils wet.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats, then sand with a fine (220-320) foam pad and remove the dust. Apply 3 coats in total.\u003c\/li\u003e\n\u003cli\u003eTreat gently for 7-10 days and allow 21 days to cure before heavy use or cleaning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use over bright whites; the finish will yellow. For white surfaces GF recommends White Poly or Brushable White Enamel.\u003c\/li\u003e\n\u003cli\u003eFor high-use surfaces such as kitchen tabletops, kitchen cabinets or bath vanities, GF recommends High Performance Topcoat, Enduro Clear Poly or Arm-R-Seal instead, since they have greater water and chemical resistance.\u003c\/li\u003e\n\u003cli\u003eNot compatible with shellac, linseed oils or Danish oils. Let oil-based products dry 72+ hours before applying it over them.\u003c\/li\u003e\n\u003cli\u003eMeets SCAQMD, CARB, Canada and OTC Phase I and II air quality rules (TDS). Sold in quarts and gallons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eGeneral Finishes' SDS for Enduro-Var II Gloss (product code B088, issued 08\/15\/2020) carries the signal word Warning: causes skin irritation and serious eye irritation, may cause respiratory irritation, and is harmful to aquatic life. Its Prop 65 section names ethylene oxide, 1,4-dioxane and ethanediol; the page's label text for Satin, Semi-Gloss and Gloss is stronger than the SDS: Danger, causes severe eye and skin burns, harmful if swallowed, causes respiratory tract irritation, and its Prop 65 note names N-methyl-2-pyrrolidone. Use with adequate ventilation, wear gloves and eye protection, wear a NIOSH\/MSHA-approved respirator when spraying, and keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eAlso in \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-flat-gallon\"\u003eFlat gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-quart\"\u003eSatin quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-satin-gallon\"\u003eSatin gallon\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-semi-gloss-quart\"\u003eSemi-Gloss quart\u003c\/a\u003e, \u003ca href=\"\/products\/general-finishes-enduro-var-ii-topcoat-amber-gloss-quart\"\u003eGloss quart\u003c\/a\u003e. For a clear, non-ambering option see \u003ca href=\"\/products\/general-finishes-high-performance-water-based-topcoat-clear-satin-gallon\"\u003eGF High Performance Topcoat, Satin\u003c\/a\u003e. Shop all \u003ca href=\"\/collections\/general-finishes\"\u003eGeneral Finishes\u003c\/a\u003e and \u003ca href=\"\/collections\/protective-finishes-topcoats\"\u003etopcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSources: \u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-retail\/water-based-topcoats-and-sanding-sealer\/enduro-var-ii-water-based-topcoat\" target=\"_blank\" rel=\"noopener\"\u003eGeneral Finishes Enduro-Var II product page\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/TDS-2020-11-Enduro-Var-Il-General-Finishes.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF TDS Enduro-Var II, published Nov 2020\u003c\/a\u003e, \u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-01\/SDS-Enduro-Var-II-Topcoat-Gloss-General-Finishes-US-HCS-2012-v4.7-2020-08-15.pdf\" target=\"_blank\" rel=\"noopener\"\u003eGF SDS Enduro-Var II Gloss, issued 08\/15\/2020\u003c\/a\u003e.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673261277494,"sku":"197-210","price":127.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121465.jpg?v=1791582279"},{"product_id":"general-finishes-enduro-2k-clear-poly-tint-base-semi-gloss-gallon","title":"General Finishes Enduro 2K Clear Poly Tint Base, Semi-Gloss, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro 2K Clear Poly Tint Base, Semi-Gloss, Gallon\u003c\/strong\u003e is intended for interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-component post-catalyzed urethane\u003c\/li\u003e\n\u003cli\u003eTintable and 10% short-filled\u003c\/li\u003e\n\u003cli\u003eHigh water and chemical resistance\u003c\/li\u003e\n\u003cli\u003eInterior\/exterior use\u003c\/li\u003e\n\u003cli\u003eFive-day cure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior or exterior raw or stained wood; Cabinets; Furniture; Woodwork; Pre-primed steel; Fiberglass\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear tint base, Semi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSemi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater-based, two-component urethane with required NCO catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1+ hour in specifications; 30 minutes to 2 hours in application instructions depending on heat and airflow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3; or 3-4 total if using Sanding Sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray: HVLP; Air-assisted airless; Airless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eAfter NCO catalyst, add distilled water up to 10% by volume if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eGF Brush and Gun Cleaner for spray gun immediately after use; soap and water for water-based finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eSemi-Gloss \u0026lt;215 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; 1-2 coats Enduro Sanding Sealer optional for improved build. Requires Enduro NCO Catalyst.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB787-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand raw wood no finer than 220 grit; Scuff clean sealed surfaces with nonwoven pad and 50:50 alcohol\/water, dry and sand 220-320 grit; Prime tinted application over sealed surfaces; Test adhesion.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare and test substrate; prime when specified\u003c\/li\u003e\n\u003cli\u003eStir; add up to 10% NCO Catalyst by volume and mix 2-3 minutes\u003c\/li\u003e\n\u003cli\u003eRest 15 minutes; strain and spray at 3-5 mil wet film\u003c\/li\u003e\n\u003cli\u003eSand between coats and apply 2-3 coats\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Deck surfaces; Over white paint due to yellowing risk; Linseed or Danish oil finishes.\u003c\/p\u003e\u003cp\u003eSafety: Uncatalyzed Semi-Gloss base SDS is not classified as hazardous.\u003c\/p\u003e\u003cp\u003eDanger: Required NCO Catalyst is combustible; harmful if inhaled; causes serious eye damage and skin irritation; may cause skin allergy and respiratory irritation.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 450 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1+ hour in specifications; 30 minutes to 2 hours in application instructions depending on heat and airflow. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-professional-water-based\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673261408566,"sku":"197-402","price":154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121649_1_0124.jpg?v=1791582281"},{"product_id":"general-finishes-enduro-2k-clear-poly-tint-base-gloss-gallon","title":"General Finishes Enduro 2K Clear Poly Tint Base, Gloss, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro 2K Clear Poly Tint Base, Gloss, Gallon\u003c\/strong\u003e is intended for interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-component post-catalyzed urethane\u003c\/li\u003e\n\u003cli\u003eTintable and 10% short-filled\u003c\/li\u003e\n\u003cli\u003eHigh water and chemical resistance\u003c\/li\u003e\n\u003cli\u003eInterior\/exterior use\u003c\/li\u003e\n\u003cli\u003eFive-day cure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior or exterior raw or stained wood; Cabinets; Furniture; Woodwork; Pre-primed steel; Fiberglass\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eClear tint base, Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003ewater-based, two-component urethane with required NCO catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003einterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1+ hour in specifications; 30 minutes to 2 hours in application instructions depending on heat and airflow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3; or 3-4 total if using Sanding Sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray: HVLP; Air-assisted airless; Airless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eAfter NCO catalyst, add distilled water up to 10% by volume if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eGF Brush and Gun Cleaner for spray gun immediately after use; soap and water for water-based finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eGloss \u0026lt;215 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; 1-2 coats Enduro Sanding Sealer optional for improved build. Requires Enduro NCO Catalyst.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB786-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand raw wood no finer than 220 grit; Scuff clean sealed surfaces with nonwoven pad and 50:50 alcohol\/water, dry and sand 220-320 grit; Prime tinted application over sealed surfaces; Test adhesion.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare and test substrate; prime when specified\u003c\/li\u003e\n\u003cli\u003eStir; add up to 10% NCO Catalyst by volume and mix 2-3 minutes\u003c\/li\u003e\n\u003cli\u003eRest 15 minutes; strain and spray at 3-5 mil wet film\u003c\/li\u003e\n\u003cli\u003eSand between coats and apply 2-3 coats\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Deck surfaces; Over white paint due to yellowing risk; Linseed or Danish oil finishes.\u003c\/p\u003e\u003cp\u003eSafety: Uncatalyzed Gloss base SDS is not classified as hazardous.\u003c\/p\u003e\u003cp\u003eDanger: Required NCO Catalyst is combustible; harmful if inhaled; causes serious eye damage and skin irritation; may cause skin allergy and respiratory irritation.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 450 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1+ hour in specifications; 30 minutes to 2 hours in application instructions depending on heat and airflow. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-professional-water-based\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673261474102,"sku":"197-403","price":154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121656_1_0124.jpg?v=1791582283"},{"product_id":"general-finishes-enduro-2k-white-poly-tint-base-flat-gallon","title":"General Finishes Enduro 2K White Poly Tint Base, Flat, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro 2K White Poly Tint Base, Flat, Gallon\u003c\/strong\u003e is intended for Interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-component urethane\u003c\/li\u003e\n\u003cli\u003eTintable white base; 5% short-filled\u003c\/li\u003e\n\u003cli\u003eHigh water and chemical resistance\u003c\/li\u003e\n\u003cli\u003eExterior rated\u003c\/li\u003e\n\u003cli\u003eFive-day cure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior and exterior raw wood; Cabinets; Furniture; Woodwork; Pre-primed steel; Fiberglass\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eWhite tint base, Flat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eWater-based two-component urethane with required NCO catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1+ hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray: HVLP; Air-assisted airless; Airless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eAfter NCO catalyst, distilled water up to 10% by volume if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eGF Brush \u0026amp; Gun Cleaner for equipment immediately; soap and water for hands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; requires NCO Catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB793-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand raw wood no finer than 220 grit and remove dust; Scuff clean sealed surfaces with 50:50 denatured alcohol\/water, dry and sand 220-320 grit; Prime sealed surfaces with White Undercoat or interior Stain Blocker.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare substrate; prime sealed surfaces\u003c\/li\u003e\n\u003cli\u003eStir and add required NCO catalyst\u003c\/li\u003e\n\u003cli\u003eMix and allow induction time as specified\u003c\/li\u003e\n\u003cli\u003eStrain and spray 2-3 coats\u003c\/li\u003e\n\u003cli\u003eSand between coats and allow five days to cure\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Linseed or Danish oil finishes.\u003c\/p\u003e\u003cp\u003eSafety: Uncatalyzed Flat base SDS is not classified as hazardous.\u003c\/p\u003e\u003cp\u003eDanger: Required NCO Catalyst: combustible; harmful if inhaled; causes serious eye damage and skin irritation; may cause skin allergy and respiratory irritation.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 450 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1+ hour. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-professional-water\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673261506870,"sku":"197-410","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121748_1_0124.jpg?v=1791582285"},{"product_id":"general-finishes-enduro-2k-white-poly-tint-base-satin-gallon","title":"General Finishes Enduro 2K White Poly Tint Base, Satin, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro 2K White Poly Tint Base, Satin, Gallon\u003c\/strong\u003e is intended for Interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-component urethane\u003c\/li\u003e\n\u003cli\u003eTintable white base; 5% short-filled\u003c\/li\u003e\n\u003cli\u003eHigh water and chemical resistance\u003c\/li\u003e\n\u003cli\u003eExterior rated\u003c\/li\u003e\n\u003cli\u003eFive-day cure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior and exterior raw wood; Cabinets; Furniture; Woodwork; Pre-primed steel; Fiberglass\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eWhite tint base, Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eWater-based two-component urethane with required NCO catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1+ hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray: HVLP; Air-assisted airless; Airless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eAfter NCO catalyst, distilled water up to 10% by volume if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eGF Brush \u0026amp; Gun Cleaner for equipment immediately; soap and water for hands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; requires NCO Catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB792-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand raw wood no finer than 220 grit and remove dust; Scuff clean sealed surfaces with 50:50 denatured alcohol\/water, dry and sand 220-320 grit; Prime sealed surfaces with White Undercoat or interior Stain Blocker.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare substrate; prime sealed surfaces\u003c\/li\u003e\n\u003cli\u003eStir and add required NCO catalyst\u003c\/li\u003e\n\u003cli\u003eMix and allow induction time as specified\u003c\/li\u003e\n\u003cli\u003eStrain and spray 2-3 coats\u003c\/li\u003e\n\u003cli\u003eSand between coats and allow five days to cure\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Linseed or Danish oil finishes.\u003c\/p\u003e\u003cp\u003eSafety: Uncatalyzed Satin base SDS is not classified as hazardous.\u003c\/p\u003e\u003cp\u003eDanger: Required NCO Catalyst: combustible; harmful if inhaled; causes serious eye damage and skin irritation; may cause skin allergy and respiratory irritation.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 450 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1+ hour. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-professional-water\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673261539638,"sku":"197-411","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121755_1_0124.jpg?v=1792076220"},{"product_id":"general-finishes-enduro-2k-white-poly-tint-base-semi-gloss-gallon","title":"General Finishes Enduro 2K White Poly Tint Base, Semi-Gloss, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro 2K White Poly Tint Base, Semi-Gloss, Gallon\u003c\/strong\u003e is intended for Interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-component urethane\u003c\/li\u003e\n\u003cli\u003eTintable white base; 5% short-filled\u003c\/li\u003e\n\u003cli\u003eHigh water and chemical resistance\u003c\/li\u003e\n\u003cli\u003eExterior rated\u003c\/li\u003e\n\u003cli\u003eFive-day cure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior and exterior raw wood; Cabinets; Furniture; Woodwork; Pre-primed steel; Fiberglass\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eWhite tint base, Semi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eSemi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eWater-based two-component urethane with required NCO catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1+ hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray: HVLP; Air-assisted airless; Airless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eAfter NCO catalyst, distilled water up to 10% by volume if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eGF Brush \u0026amp; Gun Cleaner for equipment immediately; soap and water for hands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; requires NCO Catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB791-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand raw wood no finer than 220 grit and remove dust; Scuff clean sealed surfaces with 50:50 denatured alcohol\/water, dry and sand 220-320 grit; Prime sealed surfaces with White Undercoat or interior Stain Blocker.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare substrate; prime sealed surfaces\u003c\/li\u003e\n\u003cli\u003eStir and add required NCO catalyst\u003c\/li\u003e\n\u003cli\u003eMix and allow induction time as specified\u003c\/li\u003e\n\u003cli\u003eStrain and spray 2-3 coats\u003c\/li\u003e\n\u003cli\u003eSand between coats and allow five days to cure\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Linseed or Danish oil finishes.\u003c\/p\u003e\u003cp\u003eSafety: Uncatalyzed Semi-Gloss base SDS is not classified as hazardous.\u003c\/p\u003e\u003cp\u003eDanger: Required NCO Catalyst: combustible; harmful if inhaled; causes serious eye damage and skin irritation; may cause skin allergy and respiratory irritation.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 450 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1+ hour. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-professional-water\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673261572406,"sku":"197-412","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121762_1_0124.jpg?v=1791582289"},{"product_id":"general-finishes-enduro-2k-white-poly-tint-base-gloss-gallon","title":"General Finishes Enduro 2K White Poly Tint Base, Gloss, Gallon","description":"\u003cp\u003e\u003cstrong\u003eGeneral Finishes Enduro 2K White Poly Tint Base, Gloss, Gallon\u003c\/strong\u003e is intended for Interior\/exterior use. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-component urethane\u003c\/li\u003e\n\u003cli\u003eTintable white base; 5% short-filled\u003c\/li\u003e\n\u003cli\u003eHigh water and chemical resistance\u003c\/li\u003e\n\u003cli\u003eExterior rated\u003c\/li\u003e\n\u003cli\u003eFive-day cure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eInterior and exterior raw wood; Cabinets; Furniture; Woodwork; Pre-primed steel; Fiberglass\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColor or finish\u003c\/th\u003e\n\u003ctd\u003eWhite tint base, Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSelected size\u003c\/th\u003e\n\u003ctd\u003eGallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eWater-based two-component urethane with required NCO catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior\/exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e450 sq ft\/gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch dry\u003c\/th\u003e\n\u003ctd\u003e30+ minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecoat\u003c\/th\u003e\n\u003ctd\u003e1+ hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eIdeal drying conditions 70°F and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApply with\u003c\/th\u003e\n\u003ctd\u003eSpray: HVLP; Air-assisted airless; Airless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinning\u003c\/th\u003e\n\u003ctd\u003eAfter NCO catalyst, distilled water up to 10% by volume if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eGF Brush \u0026amp; Gun Cleaner for equipment immediately; soap and water for hands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTopcoat compatibility\u003c\/th\u003e\n\u003ctd\u003eSelf-sealing; requires NCO Catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part #\u003c\/th\u003e\n\u003ctd\u003eB790-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eHow to apply\u003c\/h3\u003e\u003cp\u003eStart with the manufacturer's preparation steps: Sand raw wood no finer than 220 grit and remove dust; Scuff clean sealed surfaces with 50:50 denatured alcohol\/water, dry and sand 220-320 grit; Prime sealed surfaces with White Undercoat or interior Stain Blocker.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrepare substrate; prime sealed surfaces\u003c\/li\u003e\n\u003cli\u003eStir and add required NCO catalyst\u003c\/li\u003e\n\u003cli\u003eMix and allow induction time as specified\u003c\/li\u003e\n\u003cli\u003eStrain and spray 2-3 coats\u003c\/li\u003e\n\u003cli\u003eSand between coats and allow five days to cure\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eUse limits: Linseed or Danish oil finishes.\u003c\/p\u003e\u003cp\u003eSafety: Uncatalyzed Gloss base SDS is not classified as hazardous.\u003c\/p\u003e\u003cp\u003eDanger: Required NCO Catalyst: combustible; harmful if inhaled; causes serious eye damage and skin irritation; may cause skin allergy and respiratory irritation.\u003c\/p\u003e\u003cp\u003eKeep the recoat time and full cure time separate when planning the project. The recoat figure tells you when another coat can be applied; it does not replace the full cure guidance.\u003c\/p\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003ch4\u003eHow much will I need?\u003c\/h4\u003e\u003cp\u003eUse these manufacturer coverage figures: 450 sq ft\/gallon. Match the figure to the container size, and account for the stated number of coats.\u003c\/p\u003e\u003ch4\u003eWhen can I apply another coat?\u003c\/h4\u003e\u003cp\u003eThe listed manufacturer recoat guidance is 1+ hour. Follow the application conditions and instructions for this product.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/wood-finishes-professional\/water-based-topcoats-and-sanding-sealers\/enduro-professional-water\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer directions and product information\u003c\/a\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":67673261605174,"sku":"197-413","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9750\/0726\/files\/606016121779_1_0124.jpg?v=1791582291"}],"url":"https:\/\/projectweekenddiy.com\/collections\/general-finishes-enduro.oembed?page=2","provider":"Project Weekend DIY","version":"1.0","type":"link"}